Asymmetric synthesis of dihydropyranones from ynones by sequential copper(I)-catalyzed direct aldol and silver(I)-catalyzed oxy-Michael reactions

Ynones as diene surrogates: the asymmetric synthesis of enantiomerically enriched substituted dihydropyranones is described. The products are obtained in two steps by a copper(I)-catalyzed direct aldol reaction of ynones followed by a silver-catalyzed oxy-Michael reaction. This easy method is compatible with both aromatic and aliphatic substrates, and provides excellent chemoselectivity under mild reaction conditions.     

Enantioselective Ir(I)-catalyzed carbocyclization of 1,6-enynes by the chiral counterion strategy

Enantioenriched bicyclo[4.1.0]hept-2-enes were synthesized by Ir(I)-catalyzed carbocyclization of 1,6-enynes. No chiral ligands were used, CO and PPh(3) were the only ligands bound to iridium. Instead, the stereochemical information was localized on the counterion of the catalyst, generated in situ by reaction of Vaska's complex (trans-[IrCl(CO)(PPh(3))(2)]) with a chiral silver phosphate. Enantiomeric excesses up to 93% were obtained when this catalytic mixture was used. (31)P NMR and IR spectroscopy suggest that formation of the trans- [Ir(CO)(PPh(3))(2)](+) moiety occurs by chlorine abstraction. Moreover, density functional theory calculations support a 6-endo-dig cyclization promoted by this cationic moiety. The chiral phosphate anion (O-P*) controls the enantioselectivity through formation of a loose ion pair with the metal center and establishes a C-H···O-P* hydrogen bond with the substrate. This is a rare example of asymmetric counterion-directed transition-metal catalysis and represents the first application of such a strategy to a C-C bond-forming reaction.     

Copper(II)-catalyzed hydrosilylation of ketones using chiral dipyridylphosphane ligands: highly enantioselective synthesis of valuable alcohols

In the presence of PhSiH(3) as the reductant, the combination of enantiomeric dipyridylphosphane ligands and Cu(OAc)(2)·H(2)O, which is an easy-to-handle and inexpensive copper salt, led to a remarkably practical and versatile chiral catalyst system. The stereoselective formation of a selection of synthetically interesting β-, γ- or δ-halo alcohols bearing high degrees of enantiopurity (up to 99.9% enantiomeric excess (ee)) was realized with a substrate-to-ligand molar ratio (S/L) of up to 10,000. The present protocol also allowed the hydrosilylation of a diverse spectrum of alkyl aryl ketones with excellent enantioselectivities (up to 98% ee) and exceedingly high turn-over rates (up to 50,000 S/L molar ratio in 50 min reaction time) in air, under very mild conditions, which offers great opportunities for the preparation of various physiologically active targets. The synthetic utility of the chiral products obtained was highlighted by the efficient conversion of optically enriched β-halo alcohols into the corresponding styrene oxide, β-amino alcohol, and β-azido alcohol, respectively.     

Copper(I)-catalyzed regioselective propargylic substitution involving Si-B bond activation

The silicon nucleophile generated by copper(I)-catalyzed Si-B bond activation allows several γ-selective propargylic substitutions. The regioselectivity (γ:α ratio) is strongly dependent on the propargylic leaving group. Chloride is superior to oxygen leaving groups in linear substrates (γ:α > 99:1), and it is only the phosphate group that also shows promising regiocontrol (γ:α = 90:10). That leaving group produces superb γ-selectivity (γ:α > 99:1) in α-branched propargylic systems, and enantioenriched substrates react with excellent central-to-axial chirality transfer.     

A Copper(I)‐Catalyzed Enantioselective γ‐Boryl Substitution of Trifluoromethyl‐Substituted Alkenes: Synthesis of Enantioenriched γ,γ‐gem‐Difluoroallylboronates

The first catalytic enantioselective γ‐boryl substitution of CF₃‐substituted alkenes is reported. A series of CF₃‐substituted alkenes was treated with a diboron reagent in the presence of a copper(I)/Josiphos catalyst to afford the corresponding optically active γ,γ‐gem‐difluoroallylboronates in high enantioselectivity. The thus obtained products could be readily converted into the corresponding difluoromethylene‐containing homoallylic alcohols using highly stereospecific allylation reactions.     

Nature of the intermediates in gold(I)-catalyzed cyclizations of 1,5-enynes

The carbene or carbocationic nature of the intermediates in the gold-catalyzed cycloisomerization of 1,5-enynes can be revealed, depending on the ligands on the gold catalysts. Gold complexes with highly electron-donating ligands promote reactions that proceed via intermediates with carbene-like character, leading to products with a bicyclo[3.1.0]hexene skeleton. The intermediate cyclopropyl endo-gold carbenes formed in this cyclization have been trapped, for the first time, to give biscyclopropane derivatives in a reaction that proceeds in a concerted fashion, according to DFT calculations.     

New Chiral Substituted 8-Quinolinyl-oxazolines as Ligands for Copper(I)-catalyzed Asymmetric Cyclopropanation

ＩｎｔｒｏｄｕｃｔｉｏｎＡｓｙｍｍｅｔｒｉｃｃａｔａｌｙｔｉｃｃｙｃｌｏｐｒｏｐａｎａｔｉｏｎｏｆｏｌｅｆｉｎｓｗｉｔｈｄｉａｚｏｃｏｍｐｏｕｎｄｓｉｓｏｎｅｏｆｔｈｅｍｏｓｔｕｓｅｆｕｌｍｅｔｈｏｄｓｆｏｒｔｈｅｓｙｎｔｈｅｓｉｓｏｆｃｈｉｒａｌｃｙｃｌｏｐｒｏｐａｎｅｓ .1Ａｎｕｍｂｅｒｏｆｅｆｆｉｃｉｅｎｔｃｈｉｒａｌｌｉｇａｎｄｓ ,ｐａｒｔｉｃｕｌａｒｌｙｂｉｓｎｉｔｒｏｇｅｎｌｉｇａｎｄｓ ,ｈａｖｅｂｅｅｎｄｅｖｅｌｏｐｅｄ ,ａｎｄｅｘｃｅｌｌｅｎｔｅｎａｎｔｉｏｓｅｌｅｃｔｉｖｉｔｉ…     

Heterogeneous versus Homogeneous Copper(II) Catalysis in Enantioselective Conjugate‐Addition Reactions of Boron in Water

We have developed Cu^II‐catalyzed enantioselective conjugate‐addition reactions of boron to α,β‐unsaturated carbonyl compounds and α,β,γ,δ‐unsaturated carbonyl compounds in water. In contrast to the previously reported Cu^I catalysis that required organic solvents, chiral Cu^II catalysis was found to proceed efficiently in water. Three catalyst systems have been exploited: cat. 1: Cu(OH)₂ with chiral ligand L1 ; cat. 2: Cu(OH)₂ and acetic acid with ligand L1 ; and cat. 3: Cu(OAc)₂ with ligand L1 . Whereas cat. 1 is a heterogeneous system, cat. 2 and cat. 3 are homogeneous systems. We tested 27 α,β‐unsaturated carbonyl compounds and an α,β‐unsaturated nitrile compound, including acyclic and cyclic α,β‐unsaturated ketones, acyclic and cyclic β,β‐disubstituted enones, acyclic and cyclic α,β‐unsaturated esters (including their β,β‐disubstituted forms), and acyclic α,β‐unsaturated amides (including their β,β‐disubstituted forms). We found that cat. 2 and cat. 3 showed high yields and enantioselectivities for almost all substrates. Notably, no catalysts that can tolerate all of these substrates with high yields and high enantioselectivities have been reported for the conjugate addition of boron. Heterogeneous cat. 1 also gave high yields and enantioselectivities with some substrates and also gave the highest TOF (43 200 h^?1) for an asymmetric conjugate‐addition reaction of boron. In addition, the catalyst systems were also applicable to the conjugate addition of boron to α,β,γ,δ‐unsaturated carbonyl compounds, although such reactions have previously been very limited in the literature, even in organic solvents. 1,4‐Addition products were obtained in high yields and enantioselectivities in the reactions of acyclic α,β,γ,δ‐unsaturated carbonyl compounds with diboron 2 by using cat. 1, cat. 2, or cat. 3. On the other hand, in the reactions of cyclic α,β,γ,δ‐unsaturated carbonyl compounds with compound 2 , whereas 1,4‐addition products were exclusively obtained by using cat. 2 or cat. 3, 1,6‐addition products were exclusively produced by using cat. 1. Similar unique reactivities and selectivities were also shown in the reactions of cyclic trienones. Finally, the reaction mechanisms of these unique conjugate‐addition reactions in water were investigated and we propose stereochemical models that are supported by X‐ray crystallography and MS (ESI) analysis. Although the role of water has not been completely revealed, water is expected to be effective in the activation of a borylcopper(II) intermediate and a protonation event subsequent to the nucleophilic addition step, thereby leading to overwhelmingly high catalytic turnover.     

Copper(I)-catalyzed synthesis of 1,3-enynes via coupling between vinyl halides and alkynes or domino coupling of vinyl halides

1,3-Enynes were easily prepared from coupling between vinyl halides and alkynes or domino coupling of vinyl halides in the presence of copper iodide. It is noteworthy that the double-bond geometry of the vinyl halides was retained during the reaction. This ligand-free protocol is potentially useful and practical.     

Enantioselective Double Manipulation of Tetrahydroisoquinolines with Terminal Alkynes and Aldehydes under Copper(I) Catalysis

Tetrahydroisoquinoline alkaloids with a C1 stereogenic center are a common unit in many natural and non‐natural compounds of biological importance. Herein we describe a novel Cu^I‐catalyzed highly chemo‐ and enantioselective synthesis of chiral tetrahydroisoquinoline‐alkaloid derivatives from readily available unsubstituted tetrahydroisoquinolines, aldehydes, and terminal alkynes in the presence of the ligand (R,R)‐N‐pinap. This synthetic operation installs two substituents in the 1‐ and 2‐positions.     

Reactivity of 3-silyloxy-1,4-enynes: Gold(III)-catalyzed regioselective nucleophilic substitution

Gold-catalyzed reactions of 3-silyloxy-1,4-enynes with alcohols afford primary, secondary, and tertiary pent-2-en-4-ynyl ethers in moderate to excellent yields. The substitution proceeds with high regioselectivity. An initial cyclization providing five-membered carbocycles instead was not observed under the reaction conditions. Control experiments show that these reactions are also catalyzed by Brønsted- and Lewis-acids, although scope and yields are markedly reduced.     

Unprecedented copper(I) bifluoride complexes: synthesis, characterization and reactivity

To be or not to bifluoride: Two synthetic pathways to unprecedented N-heterocyclic carbene copper(I) bifluoride complexes have been developed. Catalytic tests demonstrated that copper(I) bifluorides are very efficient catalysts, which do not require any additional activating agent. The first Cu-catalyzed diastereoselective allylation of (R)-N-tert-butanesulfinyl aldimines was also established. The method enables efficient, simple and general synthesis of enantiomerically enriched homoallylic amines at room temperature in high yields.