"Turn-on" fluorescent sensing with "reactive" probes

Chemical probes are valuable tools for the investigation of biochemical processes, diagnosis of disease markers, detection of hazardous compounds, and other purposes. Therefore, the development of chemical probes continues to grow through various approaches with different disciplines and design strategies. Fluorescent probes have received much attention because they are sensitive and easy-to-operate, in general. To realize desired selectivity toward a given analyte, the recognition site of a fluorescent probe is designed in such a way to maximize the binding interactions, usually through weak molecular forces such as hydrogen bonding, toward the analyte over other competing ones. In addition to such a supramolecular approach, the development of fluorescent probes that sense analytes through chemical reactions has witnessed its usefulness for achieving high selectivity, in many cases, superior to that obtainable by the supramolecular approach. Creative incorporations of the reactive groups to latent fluorophores have provided novel chemical probes for various analytes. In this feature article, we overview the recent progress in the development of turn-on fluorescent probes that are operating through chemical reactions triggered by target analytes. Various chemical reactions have been implemented in the development of many reactive probes with very high selectivity and sensitivity toward target analytes. A major emphasis has been focused on the type of chemical reactions utilized, with the hope that further explorations can be made with new chemical reactions to develop reactive probes useful for various applications.     

The Immobiline family: from "vacuum" to "plenum" chemistry.

We list here a total of 17 acrylamido acids and bases as potential buffers and titrants for isoelectric focusing separations in immobilized pH gradients. The chemistry of these compounds is reviewed and general guidelines are given for their proper use. In particular, it is shown that the most delicate compounds are the basic species, since they can undergo several degradation pathways, including: (i) spontaneous hydrolysis to acrylic acid and a diamine; (ii) spontaneous autopolymerization to oligomers and n-mers; (iii) oxidation to N-oxides during the persulfate polymerization step. A hydrophobicity scale has been constructed, by partitioning the deprotonated species in water/1-octanol phases. A scale of resistance to alkaline hydrolysis for the basic acrylamido buffers is also given, followed by general consideration on the structure/stability relationship of these chemicals.     

"Cofactor"-controlled enantioselective catalysis

We report an achiral bisphosphine rhodium complex equipped with a binding site for the recognition of chiral anion guests. Upon binding small chiral guests--cofactors--the rhodium complex becomes chiral and can thus be used for asymmetric catalysis. Screening of a library of cofactors revealed that the best cofactors lead to hydrogenation catalysts that form the products with high enantioselectivity (ee's up to 99%). Interestingly, a competition experiment shows that even in a mixture of 12 cofactors high ee is obtained, indicating that the complex based on the best cofactor dominates the catalysis.     

尼古丁的“口供”

This is a piece of confession made by Nicotine where its molecular structure and some physiological functions are introduced. The toxicity of Nicotine on human body has been revealed, based on an authentic suicide case. Combined with medical knowledge, the process of Nicotine intoxication, the mechanism of smoking addition and Nicotine's negative effect on human body, have been presented. Ultimately non-smoking advice is suggested for the sake of human health.     

Amphiphilic Janus gold nanoparticles via combining "solid-state grafting-to" and "grafting-from" methods

Despite the great efforts that have been made toward obtaining Janus architectures, synthesizing sub-10 nanometer Janus nanoparticles (NPs) modified with different types of polymers remains a challenging task. In this Communication, "solid-state grafting-to" and "grafting-from" methods were combined to obtain Janus gold NPs (AuNPs) modified with two types of polymer chains on the opposite sides of the NP. We used functionalized polymer single crystals as the solid substrates to immobilize AuNPs. We then used atom transfer radical polymerization to grow polymer chains on the "free" side of the AuNPs. Amphiphilic polyethylene oxide (PEO)-Au-poly(methyl methacrylate), PEO-Au-poly(tert-butyl acrylate) and hydrophilic PEO-Au-poly(acrylic acid) were synthesized. The Janus nature was demonstrated using a platinum-nanoparticle-decoration method. Using polymer single crystals as the reaction substrates is advantageous because they afford higher throughput compared with self-assembled monolayers. Dissolution of the single crystal also leads to NPs with defined polymer patches. We anticipate that our approach could serve as a generic method for synthesizing polymer-functionalized, sub-10 nm Janus NPs. This unique system holds promises for achieving controlled assembly and tunable optic and electronic properties of NPs.     

化“材”为“筑”

Chemistry is a central, practical and creative discipline. The development of chemistry plays an important role in the progress of science and society, as well as the improvement of the quality of human life. This paper introduces the chemical knowledge of stone, concrete, glass and other inorganic nonmetallic building materials by the anthropomorphically story. Taking nanomaterials as an example, the prospect of building materials development in the future is put forward.     

"Decoking" of a "coked" zeolite catalyst in a glow discharge

'Decoking' of a 'coked' zeolite catalyst in a glow discharge in oxygen is investigated. The 'decoking' process involves reactions of atomic oxygen (O atoms) with 'coke' and yields gases such as CO, CO₂ as well as other gaseous products that could be easily pumped out.Three different modes of discharge were investigated including a static mode, a flowing-gas mode, and a periodic-purge mode where the oxygen and other gaseous products of the discharge were replaced by fresh O₂ gas after short but regular intervals of time. In some cases, additional heating was also used to provide base temperatures of the order of 100 °C to facilitate penetration of oxygen atoms into the inner layers and cages of the zeolite catalyst.This paper presents some results of spectroscopic analytical techniques used to monitor the atomization of oxygen, oxidation of 'coke', and to confirm the process of 'decoking'. More specifically, radiation emission on the 3 s ⁵S– 3p ⁵P transitions of O around 777.2–777.5 nm were selected for monitoring the atomization of O₂. On the other hand, X-ray photo-electron spectroscopy (XPS) was used to determine the amount of residual carbon and extent of 'decoking'. Furthermore, evolution of CO and CO₂ gases as a function of time was systematically monitored in real time. For CO, the 451.1 nm band head belonging to the B¹ - A¹ bands of the Angstrom system of the CO spectrum was used, while for CO₂, the band head at 353.4 nm belonging to the CO₂⁺ spectrum was used. The rates of evolution of CO and CO₂ were related to the rate of 'decoking' of the catalyst. It is noted that in the periodic-purge mode, about 63% of the total yield of CO from a given sample of the catalyst appears in the first 3-min exposure to discharge whereas it takes up to 15 min to remove nearly 94% of the removable carbon under our experimental conditions.     

Semi-quantitative "spot-test" of cyanide.

A selective, sensitive, rapid and simple-handling analytical method for the determination of cyanide at low detection limits in surface and underground water, soil and industrial waste samples was developed. The method is based on a reaction, proposed by Guilbault and Kramer, where free cyanide reacts with p-nitrobenzaldehyde to form an intermediate cyanohydrin, which reacts with o-dinitrobenzene to give a highly colored purple compound. The original procedure was modified for application in a small device containing a gas-permeable membrane. The cyanide is converted in the volatile hydrogen cyanide, which permeates through a PTFE membrane, reaching colorimetric reagents. In order to obtain semi-quantitative results, printed color scales were built. The method allows rapid, accurate, selective, low-cost and simple-handling determinations of free cyanide, even in complex samples. About 150 real samples were analyzed. Less than 10 ng of free cyanide per ml (10 microg l(-1)) can be easily detected. For more concentrated solutions, the results had been compared to those obtained using differential pulse polarography. The standard addition method was used for more diluted solutions.     

Gallium cluster "magic melters"

Calorimetry measurements (using a method based on multicollision induced dissociation) have been performed for unsupported gallium clusters, Gan+ (n = 30-50 and 55). Melting transitions have been identified from spikes in the heat capacities recorded as a function of temperature. There are enormous fluctuations in the melting temperatures and the heats of fusion with cluster size. Clusters with n = 31, 33, 37, and 45-47 are "magic melters" with particularly well-defined melting transitions. There is a strong correlation between the heats of fusion, entropies of fusion, and the stabilities of the clusters. However, these quantities are not strongly correlated with the melting temperatures.     

How to find "missing" genes

Assigning function to "new" proteins is frequently the rate-determining step for deciphering metabolic pathways and regulatory networks. Osterman and Begley break down this barrier by demonstrating that comparative analyses of microbial genomes is a powerful strategy for identifying pathway components.     

Making "wheels" and "cubes" from triangles

[Mn(IV)Mn(II)3] triangular units directed by the presence of tripodal alcohols self-assemble in the presence of azide and acetate ligands to form either a [Mn24] "wheel" or a [Mn32] "cube".     

"Orthogonal" separations for reversed-phase liquid chromatography

A general procedure is proposed for the rapid development of a reversed-phase liquid chromatographic (RP-LC) separation that is "orthogonal" to a pre-existing ("primary") method for the RP-LC separation of a given sample. The procedure involves a change of the mobile-phase organic solvent (B-solvent), the replacement of the primary column by one of very different selectivity, and (only if necessary) a change in mobile phase pH or the use of a third column. Following the selection of the "orthogonal" B-solvent, column and mobile phase pH, further optimization of peak spacing and resolution can be achieved by varying separation temperature and either isocratic %B or gradient time. The relative "orthogonality" of the primary and "orthogonal" RP-LC methods is then evaluated from plots of retention for one method versus the other. The present procedure was used to develop "orthogonal" methods for nine routine RP-LC methods from six pharmaceutical analysis laboratories. The relative success of this approach can be judged from the results reported here.     

Size evolution study of "molecular" and "atom-in-cluster" polarizabilities of medium-size gold clusters

A study on static polarizabilities for a family of gold clusters (Au(n), n = 6, 12, 20, 34, 54) is presented. For each cluster, a density functional theory perturbation theory calculation was performed to compute the cluster polarizability and the polarizability of each atom in the cluster using Bader's "quantum theory of atoms in molecules" formalism. The cluster polarizability tensor, α(cluster), is expressed as a sum of the atom-in-molecule tensors, α(cluster)=∑(Ω)α(Ω). A strong quadratic correlation (R(2) = 0.98) in the isotropic polarizability of atoms in the cluster and their distance to the cluster center of mass was observed. The cluster polarizabilities are in agreement with previous calculations.     

"Clickable" polymersomes

Polymersomes, composed of amphiphilic polystyrene-block-poly(acrylic acid) (PS-b-PAA), with the periphery being covered with azide groups, were used for further functionalization using "click" chemistry.     

Rhodium-mediated stereoselective polymerization of "carbenes"

Unprecedented rhodium-catalyzed stereoselective polymerization of "carbenes" from ethyl diazoacetate (EDA) to give high molecular mass poly(ethyl 2-ylidene-acetate) is described. The mononuclear, neutral [(N,O-ligand)M(I)(cod)] (M = Rh, Ir) catalytic precursors for this reaction are characterized by (among others) single-crystal X-ray diffraction. These species mediate formation of a new type of polymers from EDA: carbon-chain polymers functionalized with a polar substituent at each carbon of the polymer backbone. The polymers are obtained as white powders with surprisingly sharp NMR resonances. Solution and solid state NMR data for these new polymers reveal a highly stereoregular polymer, with a high degree of crystallinity. The polymer is likely syndiotactic. Material properties are very different from those of atactic poly(diethyl fumarate) polymer obtained by radical polymerization of diethyl fumarate. Other diazoacetates are also polymerized. Further studies are underway to reveal possible applications of these new materials.     

A self-threaded "molecular 8"

A new type of [1]rotaxanes containing two aliphatic bridges between axle and wheel is obtained in 39% yield in a one-step synthesis starting from a [2]rotaxane which contained one sulfonamide group each in both the wheel and the axle. Temperature controlled chemoselective substitution reactions first at these sulfonamide nitrogens and then subsequently at the various other carboxamide nitrogens in the wheel and axle give rise to the formation of an isomeric mixture of three double-bridged [1]rotaxanes which could be separated by HPLC. Structure determination of the main product 3a was possible by NMR experiments supported by molecular modeling calculations. Using different reaction conditions, a double-substituted but not yet bridged [2]rotaxane 4 could be isolated as an intermediate giving further evidence for the assigned structure of 3a and the way of its formation. The shape of this double-bridged [1]rotaxane 3a reminds of a self-intertwining chiral "molecular 8", in which any possible racemization due to deslipping is hindered by the two stoppers originating from the former rotaxane axle. Hence, to the best of our knowledge this is the first example of a molecule in which both concepts, cycloenantiomerism and helical chirality, are realised in one structure. Enantiomer separation of the main product was possible by further HPLC using chiral stationary phases. The Cotton effects of the circular dichrograms are different to those of the already synthesized [1]rotaxanes bearing just one aliphatic bridge between axle and wheel.     

Wettability increase by "corona" ionization

Experiments showing an increase in the wettability of a hydrophobic surface when using corona air ionization are shown. Photoluminiscence observations support the predictions of charge accumulation at the triple line and confirm previous experiments. In all of the experiments, the contact angle was in the saturation regime at a value smaller than that predicted by the condition of a zero value for the solid-liquid surface tension. The PDMS did not show any deterioration due to the corona exposure under the experimental conditions used. The contact angle is shown to increase with humidity.     

"Contact" of nanoscale stiff films

We investigated the contact behaviors of a nanoscopic stiff thin film bonded to a compliant substrate and derived an analytical solution for determining the elastic modulus of thin films. Microscopic contact deformations of the gold and polydopamine thin films (<200 nm) coated on polydimethylsiloxane elastomers were measured by indenting a soft tip and analyzed in the framework of the classical plate theory and Johnson-Kendall-Roberts (JKR) contact mechanics. The analysis of this thin film contact mechanics focused on the bending and stretching resistance of thin films and is fundamentally different from conventional indentation measurements where the focus is on the fracture and compression of the films. The analytical solution of the elastic modulus of nanoscopic thin films was validated experimentally using 50 and 100 nm gold thin films coated on polydimethylsiloxane elastomers. The technical application of this analysis was further demonstrated by measuring the elastic modulus of thin films of polydopamine, a recently discovered biomimetic universal coating material. Furthermore, the method presented here is able to quantify the contact behaviors of nanoscopic thin films, effectively providing fundamental design parameters, the elastic modulus, and the work of adhesion, crucial for transferring them effectively into practical applications.