The problem of the non-linear unsymmetrical bending for cylindrically orthotropic circular thin plate with variable thickness

I-Intr0ducti0nThebendingproblemofcircularthinplateisimriartantbothintheoryandinengineeringpractice,butbecausethebasicequationsoftheproblemsofnon-linearunsymmetricalbendingf0rcircularthinplate'arenonlineardifferentialequations,itisquitedifficulttoobtainana…     

LARGE DEFLECTION PROBLEM OF THIN ORTHOTROPIC CIRCULAR PLATE ON ELASTIC FOUNDATION WITH VARIABLE THICKNESS UNDER UNIFORM PRESSURE

ＬＡＲＧＥＤＥＦＬＥＣＴＩＯＮＰＲＯＢＬＥＭＯＦＴＨＩＮＯＲＴＨＯＴＲＯＰＩＣＣＩＲＣＵＬＡＲＰＬＡＴＥＯＮＥＬＡＳＴＩＣＦＯＵＮＤＡＴＩＯＮＷＩＴＨＶＡＲＩＡＢＬＥＴＨＩＣＫＮＥＳＳＵＮＤＥＲＵＮＩＦＯＲＭＰＲＥＳＳＵＲＥ（王嘉新）（刘杰）ＬＡＲＧ...     

Basic equations of the problem of the nonlinear unsymmetrical bending for orthotropic rectangular thin plate with variable thickness

Under the case of ignoring the body forces and considering components caused by diversion of membrane in vertical direction ( z-direction ), the constitutive equations of the problem of the nonlinear unsymmetrical bending for orthotropic rectangular thin plate with variable thickness are given; then introducing the dimensionless variables and three small parameters, the dimensionaless governing equations of the deflection function and stress function are given.     

Uniformly valid asymptotic solutions of the nonlinear unsymmetrical bending for orthotropic rectangular thin plate of four clamped edges with variable thickness

By using “the method of modified two-variable”,“the method of mixing perturbation ”and introducing four small parameters, the problem of the nonlinear unsymmetrical bending for orthotropic rectangular thin plate with linear variable thickness is studied. And the uniformly valid asymptotic solution of Nth- order for ε1 and Mth- order for ε2 of the deflection functions and stress function are obtained.     

Nonlinear stability of truncated shallow conical sandwich shell with variable thickness

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ,ｗｉｔｈｔｈｅｅｓｓｅｎｔｉａｌａｄｖａｎｔａｇｅｓｏｆｌｉｇｈｔｗｅｉｇｈｔａｎｄｈｉｇｈｒｉｇｉｄｉｔｙ ,ｓａｎｄｗｉｃｈｐｌａｔｅｓａｎｄｓｈｅｌｌｓｈａｖｅｂｅｅｎｕｓｅｄａｓａｎｉｍｐｏｒｔａｎｔｐａｔｔｅｒｎｏｆｓｔｒｕｃｔｕｒｅｅｌｅｍｅｎｔｓｉｎａｅｒｏｎａｕｔｉｃａｌ,ａｓｔｒｏｎａｕｔｉｃａｌａｎｄｎａｖａｌｅｎｇｉｎｅｅｒｉｎｇ .Ｔｈｅｒｅｆｏｒｅ ,ａｃｏｎｓｉｄｅｒａｂｌｅａｍｏｕｎｔｏｆｒｅｓｅａｒｃｈｈａｓｂｅｅｎｃｏ…     

任意变厚度的旋转扁薄壳非线性稳定的幂函数解法

以幂函数为试函数,两次使用配点法成功地分离了耦合的大挠度方程,从而导出变厚度旋转扁壳非线性稳定的计算式。支座可以是弹性的。本文给出了均布或多项式分布荷载作用下,线性或多项式型变厚度的圆锥壳、球壳、余弦壳或四次多项式型旋转壳的上、下临界荷载。均布荷载作用下指数型变厚度球壳的上临界荷载同其他方法的结果作了比较。用配点法编写的程序具有收敛范围大、精度高、通用性强和计算时间少的优点。     

Navier solution for the elastic equilibrium problems of anisotropic skew thin plate wite variable thickness in nonlinear theories

This paper discusses the elastic equilibrium problems of anisotropic skew thin plate ofvariable thickness simply supported on all four sides in nonlinear theories,and uses theNavier method to seek an approach to the problem,and to illustrate the solution with theexamples.In conclusion,the mention is made of the scope of application and theconvergency of the solution.     

用能量法研究双模量大挠度圆板的轴对称弯曲

双模量圆板在外载荷作用下发生轴对称弯曲变形时,会形成各向同性的拉伸区和压缩区.此种情况下,可把双模量圆板看成两种各向同性材料组成的层合板,采用弹性理论建立了双模量圆板在外载荷作用下的静力平衡方程,利用静力平衡方程确定了双模量圆板的中性面位置.在此基础上,采用能量法研究了双模量大挠度圆板轴对称弯曲变形问题,将该方法计算结...     

Large deflection problem of thin orthotropic circular plate with variable thickness under uniform pressure

Basic equations for large deflection theory of thin orthotropic circular plate with variable thickness are derived in this paper. The modified iteration method is adopted to solve the large deflection problem of thin orthotropic circular plate with variable thickness under uniform pressure. If ε=0, then the solution derived from the result in this paper coincides completely with the result given by J. Nowinski (using perturbation method) for solving large deflection problem of thin orthotropic circular plate with constant thickness under uniform pressure.     

Nonlinear bending of the shallow spherical shells with variable thickness under axisymmetrical loads

Based on the differential equation of the nonlinear bending of shallow sphericalshells with variable thickness under axisymmetrical loads,this paper studies thenumerical solution of the nonlinear differential equation by means of interpolatingmatrix method.The analysis of the results indicates that the suggested method is easyto implement and obtains the same high accuracy for both the displacements and theinternal forces.     

The large deflection problem of circular thin plate with variable thickness under uniformly distributed loads

In this paper, to begin with, the large deflection equation of variable thickness circular plates is given. By using small parameter method and revised iteration jointly a cubic approximate solution is obtained. A characteristic is also given for comparison with linear theory.     

THE PROBLEMS OF THE NONLINEAR UNSYMMETRICAL BENDING FOR CYLINDRICALLY ORTHOTROPIC CIRCULA RPLATE（I）

ＴＨＥＰＲＯＢＬＥＭＳＯＦＴＨＥＮＯＮＬＩＮＥＡＲＵＮＳＹＭＭＥＴＲＩＣＡＬＢＥＮＤＩＮＧＦＯＲＣＹＬＩＮＤＲＩＣＡＬＬＹＯＲＴＨＯＴＲＯＰＩＣＣＩＲＣＵＬＡＲＰＬＡＴＥ（Ｉ）ＱｉｎＳｈｅｎｇ－Ｉｉ（秦圣立）ＨｕａｎｇＪｉａ－ｙｉｎ（黄家寅）（Ｑｕｆ...     

APPLICATION OF THE MODIFIED METHOD OF MULTIPLE SCALES TO THE BENDING PROBLEMS FOR CIRCULAR THIN PLATE AT VERY LARGE DEFLECTION AND THE ASYMPTOTICS OF SOLUTIONS(Ⅱ)

This paper is a continuation of part (Ⅰ), on the asymptotics behaviors of the series solutions investigated in (Ⅰ). The remainder terms of the series solutions are estimated by the maximum norm.     

Application of the modified iteration method to nonlinear postbuckling analysis of thin circular plates

In this paper,the modified iteration method is further generalized to the study ofaxisymmetrical postbuckling of thin circular plates and hereby a new approximate analyticsolution of the problem is obtained.Further utilizations of this method to postbucklinganalyses of plates of more complicated structure are expected.     

On asymmetric bending of functionally graded solid circular plates

Based on the three-dimensional elasticity equations, this paper studies the elastic bending response of a transversely isotropic functionally graded solid circular plate subject to transverse biharmonic forces applied on its top surface. The material properties can continuously and arbitrarily vary along the thickness direction. By virtue of the generalized England’s method, the problem can be solved by determining the expressions of four analytic functions. Expanding the transverse load in Fourier series along the circumferential direction eases the theoretical construction of the four analytic functions for a series of important biharmonic loads. Certain boundary conditions are then used to determine the unknown constants that are involved in the four constructed analytic functions. Numerical examples are presented to validate the proposed method. Then, we scrutinize the asymmetric bending behavior of a transversely isotropic functionally graded solid circular plate with different geometric and material parameters.     

各向异性矩形薄板弯曲问题的一般解

给出了各向异性矩形薄板弯曲问题微分方程的一般解。可以求解任意载荷作用下各种边界的弯曲问题。以四边固支的正方形板为例进行了数值计算。     

板弯曲问题的群论方法

利用群论方法提出周期区域的分片正交多项式连续函数,在周期区域内利用正交分片多项式逼近位移函数可以大大地降低计算量。非周期区域的板可以通过附加边界载荷将其扩展成周期区域的板。利用此方法可以大大降低板弯曲问题的计算量。     

A finite difference method at arbitrary meshes for the bending of plates with variable thickness

A finite difference method at arbitrary meshes for the bending of plates with variable thickness is presented in this paper.The method is completely general with respect to various boundary conditions,load cases and shapes of plates.This difference scheme is simple and the numerical results agree well with those obtained by other methods.     

Application of the modified method of multiple scales to solving the problem of a thin clamped circular plate of a very large deflection

In this paper,asymptotic behaviour of the solution to the problem of a thin clamped circular plate under uniform normal pressure at very large deflection is restudied by means of the modified method of multiple scales given in[1?].The result presented herein is in good agreement with the one obtained by professor Chien Wei-zang who first proposed the method of composite expansions to solve this problem in[3].However,by contrast,the advantage of the modified method of multiple scales it seems to be relatively simpler than the method used in[3].It is also shown that the restriction of the method of paper[1-2]pointed out in paper[4]is not essential,and several computation errors in[3]are corrected as well.     

Nonsymmetrical large deformation bending problem of circular thin plates

To begin with, in this paper, the displacement governing equations and the boundary conditions of nonsymmetrical large deflection problem of circular thin plates are derived. By using the transformation and the perturbation method, the nonlinear displacement equations are linearized, and the approximate boundary value problems are obtained. As an example, the nonlinear bending problem of circular thin plates subjected to comparatively complex loads is studied.