Studying Interfacial Reactions of Cholesterol Sulfate in an Unsaturated Phosphatidylglycerol Layer with Ozone Using Field Induced Droplet Ionization Mass Spectrometry

Field-induced droplet ionization (FIDI) is a recently developed ionization technique that can transfer ions from the surface of microliter droplets to the gas phase intact. The air-liquid interfacial reactions of cholesterol sulfate (CholSO₄) in a 1-palmitoyl-2-oleoyl-sn-phosphatidylglycerol (POPG) surfactant layer with ozone (O₃) are investigated using field-induced droplet ionization mass spectrometry (FIDI-MS). Time-resolved studies of interfacial ozonolysis of CholSO₄ reveal that water plays an important role in forming oxygenated products. An epoxide derivative is observed as a major product of CholSO₄ oxidation in the FIDI-MS spectrum after exposure of the droplet to O₃ for 5 s. The abundance of the epoxide product then decreases with continued O₃ exposure as the finite number of water molecules at the air-liquid interface becomes exhausted. Competitive oxidation of CholSO₄ and POPG is observed when they are present together in a lipid surfactant layer at the air-liquid interface. Competitive reactions of CholSO₄ and POPG with O₃ suggest that CholSO₄ is present with POPG as a well-mixed interfacial layer. Compared with CholSO₄ and POPG alone, the overall ozonolysis rates of both CholSO₄ and POPG are reduced in a mixed layer, suggesting the double bonds of both molecules are shielded by additional hydrocarbons from one another. Molecular dynamics simulations of a monolayer comprising POPG and CholSO₄ correlate well with experimental observations and provide a detailed picture of the interactions between CholSO₄, lipids, and water molecules in the interfacial region.     

Competition between DPPC and SDS at the air-aqueous interface

Vibrational sum frequency generation spectroscopy is used to study the interactions of the charged soluble organic surfactant sodium dodecyl sulfate (SDS) with an insoluble 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayer at the air-aqueous interface. Results indicate that the surfactant species compete for surface sites in the mixed system, with a lower monolayer number density of DPPC molecules being observed in the presence of dodecyl sulfate anions at the interface. Spectroscopic results also indicate that fewer dodecyl sulfate chains reside at the interface when the insoluble DPPC film is present. Increased conformational ordering of the acyl chains of both the DPPC molecules and the interfacial dodecyl sulfate anions is observed in the mixed system. Additionally, charged surfactant SDS promotes the alignment of the interfacial water molecules even in the presence of a DPPC monolayer.     

Surfactant-assisted spreading of a liquid drop on a smooth solid surface

Axisymmetric spreading of a liquid drop covered with an insoluble surfactant monolayer on a smooth solid substrate is numerically investigated. As the drop spreads, the adsorbed surfactant molecules are constantly redistributed along the air-liquid interface by convection and diffusion, leading to nonuniformities in surface tension along the interface. The resulting Marangoni stresses affect the spreading rate by altering the surface flow and the drop shape. In addition, surfactant accumulation in the vicinity of the moving contact line affects the spreading rate by altering the balance of line forces. Two different models for the constitutive relation at the moving contact line are used, in conjunction with a surface equation of state based on the Frumkin adsorption framework, to probe the surfactant influence. The coupled evolution equations for the drop shape and monolayer concentration profile are integrated using a pseudospectral method to determine the rate of surfactant-assisted spreading over a wide range of the dimensionless parameters governing the spreading process. The insoluble monolayer enhances spreading through two mechanisms; a reduction in the equilibrium contact angle, and an increase in the magnitude of the radial pressure gradient within the drop due to the formation of positive surface curvature near the moving contact line. Both mechanisms are driven by the accumulation of surfactant at the contact line due to surface convection. Although the Marangoni stresses induced at the air-liquid interface reduce the rate of spreading during the initial stages of spreading, their retarding effect is overwhelmed by the favorable effects of the aforementioned mechanisms to lead to an overall enhancement in the rate of spreading in most cases. The spreading rate is found to be higher for bulkier surfactants with stronger repulsive interactions. With the exception of monolayers with strong cohesive interactions which tend to retard the spreading process, the overall effect of an insoluble monolayer is to increase the rate of drop spreading. Simulation results for small Bond numbers indicate the existence of a power-law region for the time-dependence of the basal radius of the drop, consistent with experimental measurements.     

TPPS和Gemini表面活性剂的复合膜及其手性的研究

研究了一种新的gemini表面活性剂(C12H24-α,ω-(C12H25N＋(CH3)2Br－)2, （简写为C12-C12-C12）和TPPS在气液界面上形成的复合膜及其手性.实验发现,单独C12-C12-C12不能在纯水表面形成稳定的单分子膜，但当亚相中存在TPPS时，可形成稳定的单分子膜.通过水平提拉法将复合膜转移到固体基板上，发现在适当的pH值条件下，TPPS可在复合膜中形成J-聚集体，并且发现，尽管Gemini表面活性剂和TPPS 都 是非手性的，TPPS的J-聚集体表现出强烈的Cotton效应.另外，gemini表面活性剂的两个正电荷中心对TPPS的J-聚集体的手性并不能表现出协同效应.     

New insights into lung surfactant monolayers using vibrational sum frequency generation spectroscopy

At the air-water interface, interfacial molecular structure, intermolecular interactions, film relaxation and film respreading of model lung surfactant monolayers were studied using vibrational sum frequency generation (VSFG) spectroscopy combined with a Langmuir film balance. Chain-perdeuterated dipalmitoylphosphatidylcholine (DPPC-d62), palmitoyloleoyl-phosphatidylglycerol (POPG), palmitic acid (PA) and tripalmitin were investigated. In the DPPC-d62-PA binary monolayer, PA showed a condensing effect on the DPPC chains. On the contrary, in the DPPC-d62-POPG binary monolayer, POPG showed a fluidizing effect on the DPPC chains. In the ternary monolayer system of DPPC-d62-POPG-PA, the balance between the fluidizing and the condensing effect was also observed. In addition, the film relaxation behavior of DPPC-d62 and the enhanced film stability of DPPC-d62 caused by the addition of tripalmitin were observed. Real-time VSFG was also employed to study the respreading properties of a complex lung surfactant mixture containing DPPC-d62, POPG, PA and KL4 (a mimic of SP-B) peptide, which revealed DPPC enrichment after film compression.     

Difference in Surface Properties between Insoluble Monolayer and Adsorbed Film from Kinetics of Water Evaporation and BAM Image

The evaporation rate of water molecules across three kinds of interfaces (air/water interface (1), air/surfactant solution interface (2), and air/water interface covered by insoluble monolayer (3)) was examined using a remodeled thermogravimetric balance. There was no difference in both the evaporation rate and the activation energy for the first two interfaces for three types of surfactant solutions below and above the critical micelle concentration (cmc). This means that the molecular surface area from the Gibbs surface excess has nothing to do with the evaporation rate. In the third case, the insoluble monolayer of 1-heptadecanol decreased the evaporation rate and increased the activation energy, indicating a clear difference between an insoluble monolayer and an adsorbed film of soluble surfactant. This difference was substantiated by BAM images, too. The images of three surfactant solution interfaces were similar to that of just the water surface, while distinct structures of molecular assemblies were observed for the insoluble monolayer. The concentration profile of water molecules in an air/liquid interfacial region was derived by Fix's second law. The profile indicates that a definite layer just beneath the air/liquid interface of the surfactant solution is made mostly of water molecules and that the layer thickness is a few times the root-mean-square displacement %@mt;sys@%%@rl;;@%2%@ital@%Dt%@rsf@%%@rlx@%%@mx@% of the water molecules. The thickness was found to be more than a few nanometers, as estimated from several relaxation times derived from the other kinetics than evaporation of amphiphilic molecules in aqueous systems and a maximum evaporation rate of purified water.     

Synergism in the spreading of hydrocarbon-chain surfactants on polyethylene film-anionic and cationic mixtures by a two-step procedure

A study has been made of the adsorption, interaction, and spreading of mixtures of anionic and cationic surfactants at the aqueous solution/polyethylene (PE) interface. When a drop of an aqueous solution of an anionic or cationic hydrocarbon-chain surfactant is placed on a highly hydrophobic PE film (contact angle of water > 90 degrees ), it spreads to an area very little larger than that of a drop of water of the same volume. If the anionic and cationic hydrocarbon-chain surfactant solutions are mixed prior to being applied to PE film, synergism is small, if any, and the reproducibility of the experimental results is poor. However, when the cationic and anionic aqueous solutions are applied on the PE film in a sequential manner, a remarkable synergism in spreading is observed and the results are very reproducible. The area spread by an aqueous solution of the anionic-cationic mixture may be more than 400 times that of aqueous solutions of the same volume and surfactant concentration of the individual surfactant components. Previous work in this laboratory on surfactant systems showing synergism in spreading on PE film, but only weak interaction at the aqueous solution/air interface, showed that the synergy was due to changes at the aqueous solution/PE interface and not to the changes at the aqueous solution/air or PE/air interface. Investigation of the adsorption behavior at the aqueous solution/solid interface of two of the anionic-cationic mixtures studied here indicates the reason for differences in spreading behavior observed with different anionic-cationic mixtures. The more similar the adsorption tendencies at the solid/aqueous solution interface of the anionic and cationic surfactants, and the closer their adsorption to an equimolar monolayer there, the stronger their interaction there and the greater their enhancement of the spreading. A mechanism is proposed for the synergy in spreading observed, based upon the difference between the surface tension in the precursor film at the spreading interface and that at the top of the spreading drop.     

On autophobing in surfactant-driven thin films

Recent experiments (Afsar-Siddiqui, A. B.; Luckham, P. F.; Matar, O. K. Langmuir 2004, 20, 7575-7582) on the spreading of aqueous droplets containing cationic surfactants over thin aqueous films supported by negatively charged substrates demonstrated trends in the spreading behavior with either increasing surfactant concentration or increasing film thickness. Although the substrate is initially hydrophilic and the droplet spreads, surfactant adsorption at the substrate renders it hydrophobic leading to droplet retraction. We generate a model here using lubrication theory that allows the effect of the surfactant on the wettability to be taken into account. Our numerical results show that due to basal adsorption of surfactant at the interface, the initially hydrophilic solid substrate is rendered hydrophobic. This then drives droplet retraction and dewetting, which is in agreement with the experimentally observed trends.     

Thermodynamic and structural characterization of a mixed perfluorocarbon-phospholipid ternary monolayer surfactant system

Pulmonary lung surfactant is a mixture of surfactants that reduces surface tension during respiration. Perfluorinated surfactants have potential applications for artificial lung surfactant formulations, but the interactions that exist between these compounds and phospholipids in surfactant monolayer mixtures are poorly understood. We report here, for the first time, a detailed thermodynamic and structural characterization of a minimal pulmonary lung surfactant model system that is based on a ternary phospholipid-perfluorocarbon mixture. Langmuir and Langmuir-Blodgett monolayers of binary and ternary mixtures of the surfactants 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG) and perfluorooctadecanoic acid (C18F) have been studied in terms of miscibility, elasticity and film structure. The extent of surfactant miscibility and elasticity has been evaluated via Gibbs excess free energies of mixing and isothermal compressibilities. Film structure has been studied by a combination of atomic force microscopy and fluorescence microscopy. Combined thermodynamic and microscopy data indicate that the ternary monolayer films were fully miscible, with the mixed films being more stable than their pure individual components alone, and that film compressibility is minimally improved by the addition of perfluorocarbons to the phospholipids. The importance of these results is discussed in context of these mixtures' potential applications in pulmonary lung surfactant formulations.     

Optical and photocatalytic properties of single crystalline ZnO at the air-liquid interface by an aminolytic reaction

Crystalline flowerlike ZnO was synthesized by an aminolytic reaction at the air-liquid interface in an aqueous media at an alkaline pH. A thin visible film was formed at the air-liquid interface by self-assembly of flowerlike ZnO. Diffraction studies show rearrangement of the single crystalline units at the air-liquid interface leading to the formation of nanobelts. These nanobelts overlap systematically to form petals of the flowerlike structure; individual petals get curved with time. Each nanobelt is found to be single crystalline and can be indexed as the hexagonal ZnO phase. The organic product formed in the aminolytic reaction and dissolution-reprecipitation mechanism is the driving force for the formation of flowerlike ZnO at the air-liquid interface. A clear relationship between the surface, photocatalytic, and photoluminescent properties of ZnO is observed. The flowerlike structure exhibits a blue shift (3.56 eV) in the band emission as compared to bulk ZnO (3.37 eV). The photodegradation of methylene blue over the flowerlike ZnO catalyst formed at the air-liquid interface and in the sediments shows enhanced photocatalytic activity. The sub-bands formed due to surface defects facilitate separation of charge carriers increasing their lifetime, leading to enhanced photocatalytic activity of flowerlike ZnO.     

硬脂酸单分子膜上电沉积Ag膜的研究

通过电沉积方法,以气/液界面上形成的硬脂酸单分子膜为模板诱导沉积金属银膜.考察了镀液pH值、单分子膜表面压及沉积电位对银膜形貌及结构的影响.实验发现,酸性镀液的气/液界面上形成的单分子膜不能诱导沉积银,而在中性和碱性镀液的气/液界面上可以诱导银膜的生长.当单分子膜处于液态或固态时,气/液界面有银膜形成;液态单分子膜上的银膜生长速度较快,且银膜的结构一致.随着电极电位的升高,银膜沉积的速度加快,呈环状向外生长的圆形银膜逐渐变得不规则.将不同实验条件下的银膜转移出来,采用扫描电镜(SEM)、透射电镜(TEM)对银膜的结构与形貌进行了表征.研究表明,银首先在单分子膜上异相成核,由八面体构型逐渐发展成星型,最终在气/液界面形成具有松枝状微观结构的光亮银膜.     

Electrical surface potential of pulmonary surfactant

Pulmonary surfactant is a mixed lipid protein substance of defined composition that self-assembles at the air-lung interface into a molecular film and thus reduces the interfacial tension to close to zero. A very low surface tension is required for maintaining the alveolar structure. The pulmonary surfactant film is also the first barrier for airborne particles entering the lung upon breathing. We explored by frequency modulation Kelvin probe force microscopy (FM-KPFM) the structure and local electrical surface potential of bovine lipid extract surfactant (BLES) films. BLES is a clinically used surfactant replacement and here served as a realistic model surfactant system. The films were distinguished by a pattern of molecular monolayer areas, separated by patches of lipid bilayer stacks. The stacks were at positive electrical potential with respect to the surrounding monolayer areas. We propose a particular molecular arrangement of the lipids and proteins in the film to explain the topographic and surface potential maps. We also discuss how this locally variable surface potential may influence the retention of charged or polar airborne particles in the lung.     

Real-time investigation of lung surfactant respreading with surface vibrational spectroscopy

The respreading of a lung surfactant monolayer at the air-water interface is investigated with broad bandwidth sum frequency generation (BBSFG) spectroscopy. The lung surfactant mixture contains chain perdeuterated dipalmitoylphosphatidylcholine (DPPC-d62), palmitoyloleoylphosphatidylglycerol (POPG), palmitic acid (PA), and KL4 (a 21-residue polypeptide analogue to the surfactant protein SP-B). DPPC-d62 serves as a probe molecule for the spectroscopic investigation. The BBSFG spectra of DPPC-d62 in the lung surfactant mixture are obtained in the C-D stretching region in real-time during film compression and expansion in a Langmuir trough. The BBSFG intensity of the CD3 stretch peak from DPPC-d62 terminal methyl groups is used as a measure of the interfacial density of DPPC-d62 after careful consideration of orientation effects. For the first time, the interfacial loss of DPPC in a complex lung surfactant mixture is quantified. Spectroscopic results reveal that there is an 18% DPPC-d62 interfacial loss during film respreading. However, the surface pressure-area isotherm measurements demonstrate that there is a rather large trough area reduction (37%) during film expansion. The relatively small interfacial loss of DPPC-d62 and the rather large trough area reduction indicate that the respreading of DPPC and non-DPPC components in the lung surfactant is not uniform and a surface refinement process exists during film compression and expansion. This refinement process results in a DPPC-enriched monolayer with a significant depletion of non-DPPC components after film respreading. Implication for replacement surfactant design from this work is discussed.     

Preparation of Nanoparticulate [PMo11Cu(H2O)O39]5--n-C18H37NH2 Film Using Langmuir-BIodgett Method

Nanoparticulate [PMo₁₁Cu(H₂O)O₃₉]^5--(PCuMo₁₁)-n-C₁₈H₃₇NH₂ composite monolayer can be formed at the air-liquid interface using nanoparticulate PCuMo₁₁ as the subphase. The area extrapolated to π=0 is 0.27 nm² per hydrocarbon chain of the monolayer. The collapse pressure is about 3.5×10^-1 N. The composite monolayer was deposited on the solid substrate using the LB technique. The XPS characterization of the composite monolayer showed that in the film the directional alignment of PCuMo₁₁, molecules was in the direction of Cu atoms close to the amino groups of the octadecylamine moleculos.     

An investigation into drug partitioning behaviour in simulated pulmonary surfactant monolayers with associated molecular modelling

Drug delivery to the body via the inhaled route is dependent upon patient status, device use, and respirable formulation characteristics. Further to inhalation, drug‐containing particles interact and dissolve within pulmonary fluid leading to the desired pharmacological response. Pulmonary surfactant stabilises the alveolar air‐liquid interface and permits optimal respiratory mechanics. This material represents the initial contacting surface for all inhaled matter. On dissolution, the fate of a drug substance can include receptor activation, membrane partitioning and cellular penetration. Here, we consider the partitioning behaviour of salbutamol when located in proximity to a simulated pulmonary surfactant monolayer at pH 7. The administration of salbutamol to the underside of the surfactant film resulted in an expanded character for the 2‐dimensional ensemble and a decrease in the compressibility term. The rate of drug partitioning was greater when the monolayer was in the expanded state (ie, inhalation end‐point), which was ascribed to more accessible areas for molecular insertion. Quantum mechanics protocols, executed via Gaussian 09, indicated that constructive interactions between salbutamol and integral components of the model surfactant film took the form of electrostatic and hydrophobic associations. The favourable interactions are thought to promote drug insertion into the monolayer structure leading to the observed expanded character. The data presented herein confirm that drug partitioning into pulmonary surfactant monolayers is a likely prospect further to the inhalation of respirable formulations. As such, this process holds potential to reduce drug‐receptor activation and/or increase the residence time of drug within the pulmonary space.     

Decrease of droplet size of the reverse microemulsion 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/cyclohexane by addition of water

In the present contribution, results concerning the role of small amounts of water in the 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4)-in-cyclohexane ionic liquid (IL) reverse microemulsions are reported. Dynamic light scattering (DLS) revealed that the size of microemulsion droplets decreased remarkably with increasing water content although water is often used as a polar component to swell reverse microemulsions. It was thus deduced that the number of microemulsion droplets was increased which was confirmed by conductivity measurements. The states of dissolved water were investigated by Fourier transform IR (FTIR) spectroscopic analysis showing that water molecules mainly act as bound water. 1H NMR along with two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (ROESY) further revealed that water molecules were mainly located in the periphery of the polar core of the microemulsion droplets and behave like a chock being inserted in the palisade layer of the droplet. This increased the curvature of the surfactant film at the IL/cyclohexane interface and thus led to the decrease of the microemulsion droplet size. The order of surfactant molecules arranged in the interface film was increased and thus induced a loss of entropy. Isothermal titration calorimetry (ITC) indicated that an enthalpy increase compensates for the loss of entropy during the process of microstructural transition.     

山嵛酸Langmuir膜结合氨气扩散控制生长碱式硝酸锌的分形结构

以山嵛酸(BA) Langmuir膜为仿生矿化模板, 结合氨气动态扩散控制方法, 在气-液界面上制备了取向单一的Zn5(OH)8(NO3)2•2H2O分形结构材料. 利用扫描电子显微镜(SEM)和X射线衍射(XRD)分别对样品形貌及其晶型进行了表征. 结合π-A曲线研究了分形结构生长的驱动力, 并详细分析了分形生长的过程和机理. 认为Langmuir膜的存在导致了材料单一的晶面取向, 而氨气在气-液界面的动态扩散提供了分形结构形成的驱动力. 这有可能为控制合成一系列具有特殊结构的无机晶体材料提供一种可行的方法.     

Zooming in on the role of surfactants in droplet coalescence at the macroscale and microscale

Coalescence of dispersed micrometer-scale droplets is an essential step toward the separation of emulsions. The thin film between droplets must form, drain, and rupture for coalescence to occur. In surfactant-stabilized emulsions, the film drainage and droplet coalescence processes are known to be hindered because of reduced interfacial mobility. However, a clear correlation between this mobility and the underlying surfactant transport and interfacial response to shear and dilatational deformations is undercharacterized. For microscale droplets, the effect of surfactant transport to the interface and along the interface is often difficult to isolate from other bulk effects on emulsion stability. In this work, we review surfactant-mitigated coalescence in both macroscale and microscale experiments, highlighting the importance of interfacial curvature and length scales when establishing a correlation between coalescence theory and film mobility.     

The role of the surfactant head group in the emulsification process: binary (nonionic-ionic) surfactant mixtures

Dilute emulsions of dodecane in water were prepared under constant flow rate conditions with binary surfactant systems. The droplet size distribution was measured as a function of the mixed surfactant composition in solution. The systems studied were (a) the mixture of anionic sodium dodecyl sulfate (SDS) with nonionic hexa(ethyleneglycol) mono n-dodecylether (C12E6) and (b) the mixture of cationic dodecyl pyridinium chloride (DPC) with C12E6. At a constant concentration of SDS or DPC surfactant in solution (below the CMC) the mean emulsion droplet size decreases with the increase in the amount of C12E6 added to the solution. However, a sharp break of this droplet size occurs at a critical concentration and beyond this point the mean droplet size did not significantly change upon further increase of the C12E6. This point was found to corresponded to the CMC of the mixed surfactant systems (as previously determined from microcalorimetry measurements) and this result suggested the mixed adsorption layer on the emulsion droplet was similar to the surfactant composition on the mixed micelles. The emulsion droplet size as a function of composition at the interface was also studied. The mean emulsion droplet size in SDS-C12E6 solution was found to be lower than that in DPC-C12E6 system at the equivalent mole fraction of ionic surfactant at interface. This was explained by the stronger interactions between sulphate and polyoxyethylene head groups at the interface, which facilitate the droplet break-up. Counterion binding parameter (beta) was also determined from zeta-potential of dodecane droplets under the same conditions and it was found that (beta) was independent of the type of the head group and the mole fraction of ionic surfactant at interface.     

Adsorption of aromatic counterions at the surfactant/water interface: a neutron reflectivity study of hydroxybenzoate and chlorobenzoate counterions at the hexadecyl trimethylammonium surfactant/water interface

Specular neutron reflectivity has been used to investigate the adsorption of the aromatic counterions hydroxybenzoate and chlorobenzoate at the hexadecyl trimethylammonium bromide surfactant monolayer/water interface. The degree of counterion binding and the location of the counterions at the interface are shown to depend on the isomeric form of the counterion. For hydroxybenzoate, the para-substituted counterion is located within the headgroup region of the surfactant monolayer, and there is of order one counterion for every two surfactant ions. For the ortho-substituted counterion, the degree of counterion binding is higher. There is of order 0.85 counterions for each surfactant ion, and the counterion is located within the hydrophobic region of the monolayer, some 5 A from the center of the headgroup distribution. Similar results were found for the chlorobenzoate counterion, but in that case it was the para-substituted counterion that was more tightly bound and located within the hydrophobic region of the surfactant monolayer. The results for the ortho-substituted hydroxybenzoate and for the para-substituted chlorobenzoate are consistent with those previously reported for the para-tosylate. The results are discussed in the context of the ability of the specific aromatic counterion isomer to promote massive micellar growth, and the results shed light on that mechanism.