Formation of calcium crystallites in dry natural rubber particles

In this paper, the effects of drying and aging of natural rubber particles of Hevea brasiliensis are studied. The evolutions of the particle morphology and of the elemental distribution are investigated using electron-energy-loss spectroscopy imaging in a low-energy transmission electron microscope (ESI-TEM). It is found that when the sample is aged, calcium salt crystallites are formed around the particles. Fusion of these crystallites with time to form larger crystals shows evidence of ion mobility in the dry rubber matrix. Electron diffraction patterns and elemental mapping analysis indicate the crystals to be calcium sulfate. These crystallites are closely associated with membrane materials of the rubber particle and are surprisingly compatible with the hydrocarbon matrix of the rubber particle. It is proposed that polar sites on the membrane materials provide nucleation sites for the crystallization of calcium and sulfate ions from the latex serum.     

Sol–gel technology for functional finishing of PES fabric by stimuli-responsive microgel

The possibility of incorporating a stimuli-responsive microgel into a silica matrix by the sol–gel method was studied. This method allows the preparation of a novel class of functional finishes for textile material modification, which is aimed at the creation of simultaneous stimulus-responsive behaviour and functional protective properties. Using a pad-dry-cure method, a thermo- and pH-responsive microgel (PNCS) based on poly-(N-isopropylacrylamide) (poly-NiPAAm) and chitosan was embedded into a silica matrix on a previously activated polyester (PES) fabric. The matrix was composed of a model sol–gel precursor, vinyltrimethoxysilane (VTMS), in combination with hydrophilic fumed silica nanoparticles (SiO₂). Functionalized PES fabric samples were characterised by determining the morphological and chemical properties using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The stimuli (temperature and pH) responsiveness of the functionalized PES fabric was established by measuring its porosity, wicking ability, moisture content, drying rate, water vapour transmission rate and water uptake. In order to assess the washing fastness of the surface modifying systems, the tests were done before and after five consecutive washings. The results showed that sol–gel technology is an appropriate method for the incorporation of PNCS microgel on PES fibre surface. Because of the elasticity of the sol–gel matrix, the VTMS/SiO₂ polysiloxane film had no adverse influence on the swelling/deswelling effect of the PNCS microgel, thus retaining and even enhancing its stimulus response.     

Swelling Kinetics of Microgels Embedded in a Polyacrylamide Hydrogel Matrix

Composite hydrogels—macroscopic hydrogels with embedded microgel particles—are expected to respond to external stimuli quickly because microgels swell much faster than bulky gels. In this work, the kinetics of the pH‐induced swelling of a composite hydrogel are studied using turbidity measurements. The embedded microgel is a pH‐ and thermosensitive poly(N‐isopropylacrylamide‐co‐acrylic acid) microgel and the hydrogel matrix is polyacrylamide. A rapid pH‐induced swelling of the embedded microgel particles is observed, confirming that composite hydrogels respond faster than ordinary hydrogels. However, compared with the free microgels, the swelling of the embedded microgel is much slower. Diffusion of OH^? into the composite hydrogel film is identified as the main reason for the slow swelling of the embedded microgel particles, as the time of the pH‐induced swelling of this film is comparable to that of OH^? diffusion into the film. The composition of the hydrogel matrix does not significantly change the characteristic swelling time of the composite hydrogel film. However, the swelling pattern of the film changes with composition of the hydrogel matrix.     

Gold nanoparticles as structurizing agents for the formation of hybrid nanocomposites

Two types of transparent gold-containing organo-inorganic hybrid gels (polymer nanocomposites) in which gold nanoparticles (nano-Au) are efficient species were synthesized. The stage of hybrid gel formation is preceded by the in situ chemical reduction of chloroauric acid in an aqueous solution of the synthetic linear polymer (polyvinyl alcohol or poly(N-vinylpyrrolidone)) affording a nano-Au. The presence of ultradispersed gold particles in the obtained nanocomposites was confirmed by UV-Vis spectroscopy and electron microscopy. The loss of solubility of the films in water confirms the formation of a gel network. The size of the gold particles and characteristics of the hybrid gel change depending on the molecular weight of the polymer. The interaction of the macromolecules and growing particles mainly determines the diameter and number of particles of the inorganic phase, whereas the content of chloroauric acid affects these parameters to a less extent. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 329–336, February, 2008.     

Composite hydrogels with temperature sensitive heterogeneities: influence of gel matrix on the volume phase transition of embedded poly-(N-isopropylacrylamide) microgels

The thermo-responsive behaviour of poly-(N-isopropylacrylamide) (PNiPAM) microgels embedded in covalently cross-linked non-temperature-sensitive polyacrylamide (PAam) hydrogel matrixes with different compositions was investigated by using small angle neutron scattering (SANS). The composition of the composite hydrogel was varied by (a) increasing the cross-linker and acrylamide concentration leading to strong hydrogel matrixes and (b) by increasing the microgel concentration to obtain composite gels with an internal structure. Additionally we synthesized composite hydrogels by using γ-irradiation as initiation for the polymerisation. This leads to the formation of chemical bonds between the PNiPAM microgels and the surrounding polyacrylamide matrix. Thus it is possible to synthesize hydrogels without an additional cross-linker, as well as pure particle networks. Some samples were prepared at two different temperatures, below and above the volume phase transition temperature of PNiPAM, resulting in highly swollen or totally collapsed microgels during the incorporation step. The volume phase transition of microgels is not influenced by a hydrogel matrix with high acrylamide concentration independent of the preparation temperature. However, an increased cross-linker concentration leads to a corset like constraint on microgel swelling. Microgels, which are embedded in the collapsed state (at 50 °C), are not able to swell upon cooling, whereas microgels embedded in the swollen state can collapse upon heating. For samples with an increased microgel concentration, the close microgel packing was disturbed by the formation of the polyacrylamide matrix. The hydrogel matrix squeezes the microgels together and leads to partial aggregation. The experiments demonstrate how composite hydrogels with stimuli-sensitive heterogeneities can be prepared such that the full responsiveness of the embedded microgels is retained while the macroscopic dimensions of the gel are not affected by the volume phase transition of the microgels.     

Rheological properties of filled gels. Influence of filler matrix interaction

The dynamic moduli of gels filled with particles have been studied as a function of the volume fraction of dispersed particles _f (0–0.4) and of the way in which they interact with the gel matrix. Two gels of different nature were studied, viz. polyvinyl alcohol (PVA) — Congo red gels (a so-called rubber gel) and casein gels made by acidification of skimmed milk. Emulsion droplets stabilized by different macromolecules have been used as dispersed particles. If there was no interaction between the macromolecules adsorbed on the particles and the gel matrix, both the filled PVA and the filled casein gels showed a small decrease in the elastic moduli with _f , approaching the behaviour theoretically predicted for foams. In the case of interaction, the results for filled PVA gels roughly fitted the theoretical predictions, if the deformability of the emulsion droplets and the formation of an intermediate layer between the dispersed particles and the gel matrix was taken into account. The increase in the elastic moduli of the acid milk gels with _f was much greater than expected and was probably due to aggregation of the dispersed particles during gelation.     

Preparation and characterization of protein‐free natural rubber

Protein‐free natural rubber was prepared by incubation of natural rubber latex with urea and polar organic solvent in the presence of surfactant. Effect of the polar organic solvent on the removal of the proteins was investigated with respect to chemical affinity and concentration of the solvents. Under a suitable condition, nitrogen content of the deproteinized natural rubber (DPNR) was 0.000 wt%, which was less than that of natural rubber deproteinized with proteolytic enzyme or urea in the presence of surfactant. The removal of all proteins from natural rubber was proved through FT‐IR spectroscopy. Changes in morphology of the DPNR were also investigated by transmission electron microscopy. Copyright © 2011 John Wiley & Sons, Ltd.     

PH-Responsive and Self-Healing Hydrogels Fabricated with Guar Gum and Reactive Microgels

Hydrogels (MR gels) with pH-responsive and self-healing properties were prepared via guar gum solutions and reactive microgel. The reactive microgel was characterized through scanning electron microscope (SEM), laser particle-size analysis measurements, and FTIR. Compared with general hydrogels cross-linked by borax (B gels), the MR gels exhibit superior properties on the aspects of viscosity, viscoelasticies, and temperature resistance. Furthermore, the viscosities of MR gels increase with the rising pH value, and it can dynamically reconstruct after being destructed by external force. In addition, the microstructure of the MR gel was characterized by SEM, which confirms that the reactive microgel indeed as cross-linker and each microgel can cross-link several chains as if the chains were grafting from the microgels. These features show that the addition of reactive microgels can enhance the strength of MR gels significantly and indicate that the MR gels have a great potential application in hydraulic fracturing, especially in high-temperature oil fields.     

Structure formation of the mixed gels of zirconium oxyhydrate and silicic acid produced with different sequencing of reagents

The physicochemical characteristics of single and mixed zirconia and silica gels produced by the sol-gel technique at different synthesis pH and sequence of introducing the reagents in the mother liquid are presented. As a result of comparing the data obtained by different research methods, it is found that in the mixed gels, irrespective of the synthesis technique, Si-O-Zr bonds are present. The introduction of a zirconium salt in the mother liquid containing a silicate salt leads to the preferred formation of zirconia gel granules of 20–30 nm in diameter enclosed in the matrix of silica gel. The inverse sequence of introducing the gel-forming components in the reaction mixture promotes the formation of large gel aggregates containing the particles of less that 10 nm and having a high degree of polymerization. Mixed gels of zirconium oxyhydrate and silicic acid have an order higher sorptive capacity for yttrium (III) and calcium cations, as compared to single silica gels and zirconia gels.     

Anion‐Responsive Diguanidinium‐Based Chiral Organogelators

The chiral bicyclic diguanidinium chloride 1 forms gels in aromatic apolar solvents. The gels were characterized at different levels of organization, from the macroscopic to the molecular level by using microscopy, spectroscopy, and powder X‐ray diffraction. The dependency on chirality has been highlighted by circular dichroism and electron microscopy. Furthermore, the gel has been shown to be effectively responsive to anionic stimuli, thus allowing the reversible control of the organic‐phase gelation in contact with different salted aqueous solutions.     

Effect of naturally occurring crosslinking junctions on green strength of natural rubber

The effect of the naturally occurring crosslinking junctions on green strength of natural rubber, isolated from Hevea brasiliensis, was investigated by using rubber extracted from Parthenium argentatum Gray (Guayule) as a model. Guayule rubber and natural rubber were characterized through nuclear magnetic resonance spectroscopy and size exclusion chromatography. The non‐rubber components of Guayule rubber and natural rubber were characterized by Kjeldahl method and Fourier transform infrared spectroscopy. It was found that Guayule rubber contains a much higher amount of fatty acids and their esters while it contains no proteins. The gel content, determined by swelling method, was related to a number of naturally occurring crosslinking junctions of Guayule rubber and natural rubber. The outstanding green strength of natural rubber was attributed to the effect of naturally occurring crosslinking junctions, when stress–strain curve and tensile properties of unvulcanized Guayule rubber were compared with those of unvulcanized natural rubber. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation of tannin gel by enzyme-mimetic reaction of condensed tannin without use of crosslinking agent

Preparation of tannin gels was attempted by means of enzyme-mimetic reaction of condensed tannin without use of crosslinking agent. The gelation of condensed tannin was performed in the presence of H₂O₂ catalyzed by hematin of a ferriprotoporphyrin complex in water. The compressive measurements of the gels obtained by the 30–50 wt% concentrations of the tannin using 0.20–0.50 ml of 30 w/v% H₂O₂ aq. were examined. There is a tendency for the compressive properties of the gels obtained from the higher concentrations of the tannin and the larger amounts of H₂O₂ to be superior. The obtained gel was characterized by means of IR spectroscopy. Moreover, the obtained tannin gel was compatibilized with natural rubber to form a composite material.     

Self-assembly of an Octa-uranate Cage Complex with a Rigid bis-Catechol Ligand

While the terminally protected tripeptide Boc-Phe-Gly-m-ABA-OMe I (m-ABA, meta-amino benzoic acid) is an excellent gelator of aromatic organic solvents, another similar tripeptide Boc-Leu-Gly-m-ABA-OMe II, where the Phe residue of peptide I is replaced by Leu, cannot form gels with the same solvents. The morphology of the gels of peptide I, characterised by the field-emission scanning electron microscopy and high-resolution transmission electron microscopy, reveals the formation of nanofibrous networks which are known to encapsulate solvent molecules to form gels. The wide-angle X-ray scattering studies of the gels suggest the β-sheet-mediated self-assembly of peptide I in the formation of a nanofibrous network, where π-stacking interactions of Phe play an important role in the self-assembly and gel formation. The dried gel of peptide I observed between crossed polarisers after binding with a physiological dye, Congo red, shows a bluish-green birefringence, a characteristic of amyloid fibrils.     

Inducing pH responsiveness via ultralow thiol content in polyacrylamide (micro)gels with labile crosslinks

Here we present the synthesis and characterization of pH responsive polyacrylamide microgels, synthesized via free radical polymerization of acrylamide and bis (acryloylcystamine) (BAC). The gels were made with ultralow amounts of thiol functional groups incorporated into the polymer. The resulting gel monoliths were mechanically chopped into microgel particles with size distributions ranging from 80 to 200 mum. The gels exhibit an interesting reversible pH-dependent rheological behavior which led to gelling of the colloidal suspension when the pH was increased, and a low-viscosity suspension was obtained when the pH was taken back to the original value. The viscosity of the colloidal system containing MBA crosslinked microgels remained insensitive to pH. This observation motivated further analysis; viscosity measurements of the highly viscous (gel-like) state of the BAC crosslinked microgel colloidal suspension were carried out to further understand the rheological behavior of the colloidal system. Electrophoretic mobility measurements as function of pH of the BAC and MBA crosslinked colloidal polyacrylamide microgel suspensions were performed. The swelling behavior of the microgels for both colloidal systems was also determined as function of pH using static light scattering. This swelling behavior was used to rationalize the observed rheological behavior. The work presented here demonstrates that free thiol groups present within a polymer gel matrix confer pH responsive behavior to the gel in solution. The viscosity of a BAC crosslinked microgel suspension was also measured under reducing conditions. The viscosity of the microgel suspension reduced with time, due to the breakage of the disulfide bonds in the crosslinkers.     

一种含芘葡萄糖衍生物的合成及其胶凝行为

合成并表征了一种荧光活性小分子胶凝剂——芘磺酰基-丙二胺-葡萄糖(PSDAPG), 考察了其在36种常见溶剂中的胶凝行为. 结果发现, PSDAPG可使其中16种溶剂胶凝. 对癸醇, PSDAPG表现出罕见的超级胶凝能力, 室温下最低胶凝浓度(MGC)达7.0×10-4 g·mL-1. 此外, PSDAPG还是一种既可胶凝水又可胶凝有机溶剂的双性胶凝剂. 扫描电镜(SEM)、傅立叶变换红外光谱(FTIR)、核磁共振(1HNMR)和荧光光谱研究表明,在不同溶剂中, PSDAPG具有不同的聚集结构, 除了芘基之间的疏水π-π堆积作用外, 氢键作用是PSDAPG自发形成三维网络结构的重要驱动力. 实验研究还表明, 溶液态和凝胶态的PSDAPG荧光光谱均同时呈现芘的单体荧光和激基缔合物荧光光谱特征, 但两者的光谱形貌差异显著. 随凝胶的形成, 体系单体荧光发射增强, 激基缔合物荧光发射减弱,表明形成的三维网络结构阻碍了PSDAPG中芘单元的运动性, 使得以Birks途径形成激基缔合物的效率降低.     

Investigation of swelling and diffusion in polymers by NMR imaging

The kinetics of diffusion in polymers ranges from simple Fickian diffusion to higher order diffusion, such as Case II diffusion^1-2). The conventional method for determining the characteristics of solvents into polymer matrices is by measuring the mass uptake of the polymer as the solvent penetrates the matrix. However, since such measurements perform observations at a macroscopic level, little information has been obtained relating to the nature of the solvent in the polymer matrix and the mechanisms of the processes that control the diffusion. Nuclear magnetic resonance (NMR) imaging (‘MRI’) has been used to observe the penetration of solvents into solid systems in realtime. The method provides a one- or more-dimensional image of the density and the mobility of the solvent in a material or of the network changes of the material itself due to the softening influence of the solvent. The first (imaging of the solvent) can be used for a quantitative measurement of the diffusion whereas the observation of the network gives information about the changing of the network (mobility, de-crystallization…) during the swelling process. For example the diffusion of organic solvents in some polymeric materials (natural rubber, water gels (PNIPAAm), and nematic diblock-copolymers) are investigated.     

Self-Assembled Supramolecular Hybrid Hydrogel Beads Loaded with Silver Nanoparticles for Antimicrobial Applications

This Full Paper reports the formation of silver (Ag) NPs within spatially resolved two-component hydrogel beads, which combine a low-molecular-weight gelator (LMWG) DBS-CONHNH₂ and a polymer gelator (PG) calcium alginate. The AgNPs are formed through in situ reduction of Ag^I, with the resulting nanoparticle-loaded gels being characterised in detail. The antibacterial activity of the nanocomposite gel beads was tested against two drug-resistant bacterial strains, often associated with hospital-acquired infections: vancomycin-resistant Enterococcus faecium (VRE) and Pseudomonas aeruginosa (PA14), and the AgNP-loaded gels showed good antimicrobial properties against both types of bacteria. It is suggested that the gel bead format of these AgNP-loaded hybrid hydrogels makes them promising versatile materials for potential applications in orthopaedics or wound healing.     

Visualizing the interaction between poly-L-lysine and poly(acrylic acid) microgels using microscopy techniques: effect of electrostatics and peptide size

The interaction between lightly cross-linked poly(acrylic acid) (pAA) microgels (50-150 microm in diameter) and poly-L-lysine (pLys) was studied as a function of pH, ionic strength, peptide size, and concentration. The swelling response and distribution of polypeptides within microgel particles was monitored by micromanipulator-assisted light microscopy and confocal laser scanning microscopy, while binding isotherms of pLys in the microgels were determined spectrophotometrically. Conformational changes of pLys were investigated by circular dichroism. The molecular weight of pLys was found to influence the degree of peptide-induced microgel deswelling, largely due to limitation of peptides larger than the effective network mesh size to penetrate the entire gel. Large peptides were concentrated within a surface layer of the gel particles, and at low ionic strength this dense surface layer was shown to act as a largely steric barrier for further penetration of compounds into the gel core. Small peptides, however, distributed evenly throughout the microgel particles and were able to create large microgel volume reductions. The deswelling of microgels increased with decreasing pH, while the uptake of pLys was significantly reduced at low pH. The effect of ionic strength on the interactions of pLys and oppositely charged pAA microgels was moderate and only pronounced for deswelling of gels at high pH. A significant increase in the alpha-helix content of pLys interacting with the oppositely charged microgels was observed for high molecular weight peptides, and the extent of alpha-helix formation was as expected more pronounced at high pH, i.e., at high charge density of the microgels but reduced charge density of the peptides.     

Structure of TiO2 in TiO2-SiO2 prepared by a complexing agent-assisted sol-gel procedure

Many types of TiO₂-SiO₂ (Ti:Si=50:50 mol%) were prepared by the sol-gel procedure with and without 2-methyl-2, 4-pentanediol (MPD) as an organic ligand. The effect of MPD on the gel structure and the properties of the TiO₂ crystals were studied by XRD and raman spectroscopy, and the effect of the sol standing time on the properties of the TiO₂ crystals were also studied by XRD spectroscopy. In the gels with MPD, anatase of TiO₂ appeared at approximately 580°C, and the crystal structures were similar despite the difference in the gel preparation procedure. The titania gels with MPD were presumed to be dispersed in the silica gel matrix without any Ti-O-Si bond. In the presence of MPD, the formation of titania gels is controlled and the specified TiO₂ crystal is produced.     

Mechanomorphological Guidance of Colloidal Gel Regulates Cell Morphogenesis

Microstructural morphology of the extracellular matrix guides the organization of cells in 3D. However, current biomaterials-based matrices cannot provide distinct spatial cues through their microstructural morphology due to design constraints. To address this, colloidal gels are developed as 3D matrices with distinct microstructure by aggregating ionic polyurethane colloids via electrostatic screening. Due to the defined orientation of interconnected particles, positively charged colloids form extended strands resulting in a dense microstructure whereas negatively charged colloids form compact aggregates with localized large voids. Chondrogenesis of human mesenchymal stem cells (MSCs) and endothelial morphogenesis of human endothelial cells (ECs) are examined in these colloidal gels. MSCs show enhanced chondrogenic response in dense colloidal gel due to their spatial organization achieved by balancing the cell–cell and cell–matrix interactions compared to porous gels where cells are mainly clustered. ECs tend to form relatively elongated cellular networks in dense colloidal gel compared to porous gels. Additionally, the role of matrix stiffness and viscoelasticity in the morphogenesis of MSCs and ECs are analyzed with respect to microstructural morphology. Overall, these results demonstrate that colloidal gels can provide spatial cues through their microstructural morphology and in correlation with matrix mechanics for cell morphogenesis.