Synthesis and Crystal Structures of Cs<Subscript>2</Subscript>Mo<Subscript>4</Subscript>O<Subscript>13</Subscript> and Cs<Subscript>4</Subscript>Mo<Subscript>8</Subscript>O<Subscript>26</Subscript>

Polymolybdates of the composition Cs₂Mo₄O₁₃ (1) and Cs₄Mo₈O₂₆ · 4H₂O (2) are synthesized under hydrothermal conditions from a mixture containing (NH₄)₆Mo₇O₂₄ · 4H₂O and CsCl at pH 2.5 and 3.6, respectively.     

Composition of the gas phase over Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and the enthalpies of atomization of AlO,Al<Subscript>2</Subscript>O,and Al<Subscript>2</Subscript>O<Subscript>2</Subscript>

The A1, O, AlO, A1₂O, Al₂O₂, WO₂, and WO₃, partial pressures in the vapor over Al₂O₃ in a tungsten Knudsen effusion cell between 2300 and 2600 K were derived from A1⁺, O⁺, AlO⁺, A1₂O⁺, Al₂O₂⁺, WO₂⁺, and WO₃⁺, ion intensities. The mass spectrometer was calibrated against the equilibrium constant of the WO₃(g) = WO₂(g) + O(g) reaction. Refined values of the ionization cross sections of AlO and A1₂O₂ were used in the partial pressure calculations. The enthalpies of atomization of aluminum suboxides were determined to be Δ_at H ^o(AlO, g, 0) = 510.7 ± 3.3 kJ mol⁻¹, Δ_at H ^o(Al₂O, g, 0) = 1067.2 ± 6.9 kJ mol⁻¹, and Δ_at H ^o(Al₂O₂, g, 0) = 1556.7 ± 9.9 kJ mol⁻¹.     

Changes in the heat capacity of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> solid solutions near the point of antiferromagnetic phase transition in Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>

Al₂O₃-Cr₂O₃ solid solutions with 0, 4, 7, 10 and 20 mol% of corundum were synthesized using a high-pressure/high-temperature apparatus and characterized by X-ray powder diffraction. Calorimetric measurements were carried out using DSC-111 (Setaram). Heat capacity was measured by the enthalpy method in a temperature range of 260–340 K, near magnetic phase transition in pure Cr₂O₃ (305 K). Magnetic contribution into the heat capacity was derived and found to change irregularly with the composition.     

Characteristics of CuAl<Subscript>2</Subscript>-Cu<Subscript>9</Subscript>Al<Subscript>4</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocomposites synthesized by mechanical treatment

Summary Reactive milling of Cu-hydroxycarbonate - powder aluminium mixture brings many complex chemical reactions such as decomposition, aluminothermic reduction and mechanical alloying resulting in the formation of nanometer size composites that contain intermetallic phases, -Cu₉Al₄ and -CuAl₂, with aluminium oxide.     

Solid-phase synthesis of intermetallic compounds Al<Subscript>13</Subscript>Co<Subscript>4</Subscript>, Al<Subscript>13</Subscript>Fe<Subscript>4</Subscript>, and Al<Subscript>13</Subscript>Co<Subscript>2</Subscript>Fe<Subscript>2</Subscript>

Intermetallic compounds Al₁₃Co₄, Al₁₃Fe₄, and Al₁₃Co₂Fe₂ were obtained by solid-phase synthesis in air at temperatures below 600°C using precursor metals subjected to mechanochemical preactivation. The phase composition of the synthesized aluminides and composites Al₁₃Co₄/SiO₂ and Al₁₃Fe₄/SiO₂ was analyzed.     

Kinetic studies on the hydrogenation of nitrate in water using Rh/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Rh-Cu/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

Liquid-phase reduction NO ₃ ⁻ using monometallic and bimetallic catalysts (5% Rh/Al₂O₃, 5% Rh-0.5% Cu/Al₂O₃, 5% Rh-1.5% Cu/Al₂O₃, 5% Rh-5% Cu/Al₂O₃ and a physical mixture of 5% Rh/Al₂O₃ and 1.5% Cu/Al₂O₃) was studied in a slurry reactor operating at atmospheric pressure. Kinetic measurements were performed for a low concentration of nitrate (0.4 × 10⁻³−3.2 × 10⁻³ mol dm⁻³) and the temperature range 293–313 K. From the experimental data, it was found that the reduction of nitrate is first order with respect to nitrate. On the basis of the rate constants, the apparent activation energy was established using a graphic method. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 6, pp. 881–886. This article was submitted by the authors in English.     

Stability and transport properties of La<Subscript>2</Subscript>Mo<Subscript>2</Subscript>O<Subscript>9</Subscript>

La₂Mo₂O₉ samples were prepared from freeze-dried powder precursors and characterized by XRD, TG/DTA, SEM, electrical and electrochemical measurements. Pellets with different density were obtained by sintering at temperatures between 900 and 1100 °C to obtain nearly dense samples with grain sizes in the range 1–8 m. The electrical conductivity was measured using impedance spectroscopy. The capacitance and relaxation frequencies of the main contributions to the spectra were used to ascribe the contributions of grain interiors and internal interfaces, and their temperature dependence. A coulometric titration technique was used to evaluate the change of oxygen stoichiometry under moderately reducing conditions, and to estimate the stability limits under strongly reducing conditions. An ion-blocking method was used to evaluate the onset of n-type conductivity, and a combination of these results with total conductivity measurements was used to obtain the ionic transport number. A combination of oxygen stoichiometry changes and ion-blocking results was used to obtain estimates of mobility.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

Glass formation in the Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Al(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

Glass formation boundaries in the Al₂(SO₄)₃-Al(NO₃)₃-H₂O system were determined. IR spectra were studied. Schemes of structural rearrangements within the boundaries of a second glass formation region in the Al(NO₃)₃-H₂O binary subsystem are suggested. A structure is suggested for glassy Al(NO₃)₃H₂O.     

Cation-anion interactions in [Mo<Subscript>3</Subscript>S<Subscript>7</Subscript>(Et<Subscript>2</Subscript>dtc)<Subscript>3</Subscript>](Et<Subscript>2</Subscript>dtc) solutions

Quantum chemical calculations of the [Mo₃S₇(Et₂dtc)₃](Et₂dtc) complex in different solvents are performed. It is shown that the binding energy between the cluster [Mo₃S₇(Et₂dtc)₃]⁺ cation and the outersphere (Et₂dtc)^? anion exponentially decreases with increase in the solvent dielectric permittivity. By DOSY NMR it is determined that in chloroform, the cationic and anionic moieties of the complex form an associate (contact ion pair), while in strongly polar dimethyl sulfoxide these moieties move independently of one another.     

Interactions in the Al<Subscript>2</Subscript>TiO<Subscript>5</Subscript>-Ti<Subscript>2</Subscript>O<Subscript>3</Subscript> System

Interactions in the Al₂TiO₅-Ti₂O₃ system were studied and the regions of existence of Al_2?2xTi _2x ³⁺ Ti⁴⁺O₅ solid solutions with a pseudobrookite structure were determined.     

Behavior of the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> System at High Temperatures

The system Al₂O₃-ZrO₂ at temperatures of up to 2100°C was studied by differential thermal analysis.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 3, 2005, pp. 353–356.Original Russian Text Copyright © 2005 by Kamaev, Archugov, Mikhailov.     

Molecular mechanism of formation of supported platinum catalysts of the Pt/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> family

Certain stages of the classical procedure for preparing aluminum-platinum catalysts, whose understanding is important from both the basic and practical viewpoints, are considered on the molecular level. Properties of both participants (active component precursor solution and oxide surface) are shown to be inhomogeneous, which can affect interaction of the components at the fixing stage. Existing views (and their evolution) on the mechanism of adsorption of platinum complexes from aqueous solutions on aluminum oxide surface are discussed. The role of chemical processes on the stage of fixing precursor on the electronic and structural properties of the supported metal is demonstrates. Strong metal-support interaction is shown to endow platinum with specific adsorption and catalytic properties in hydrocarbon transformation reactions.     

No-Glycerol rapid heterogeneous biodiesel production on K<Subscript>2</Subscript>CO<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by coupling process

Biodiesel containing almost no glycerol has been produced by coupling reaction carried out over K₂CO₃ supported by calcium oxide as solid base catalysts. The solid base catalysts synthesized by wet impregnation exhibit an exceedingly high activity in biodiesel production. It was found that the reaction time required for the highest yield of biodiesel, 99.2%, can be shortened to 30 min over K₂CO₃/Al₂O₃ under the optimum reaction conditions: 8: 1: 1 molar ratio of methanol/DMC/oil, 30 wt % K₂CO₃/Al₂O₃ catalyst, and 65°C reaction temperature. Solid basic catalysts examined in the study were characterized by BET surface area, XRD, CO₂-TPD, and SEM techniques. The strong interaction between K₂CO₃ and the support yields a new basic active site, which can be probably responsible for the high activity of K₂CO₃/Al₂O₃.     

Laser assisted selective chemical metalization of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> films

Thick aluminum oxide films are prepared on Al plates by anodizing. On the ceramic surface thus obtained a very thin Ag film is deposited via vacuum thermal evaporation. The Ag/Al₂O₃/Al samples prepared are irradiated by Nd:YAG laser through a suitable metal mask in order to remove the top metal film in the exposed areas. Thus, a negative silver image of the copied mask is obtained. Further, the samples are processed in Ni electroless chemical bath activated by the rest of silver. All processing steps are studied by scanning electron microscopy (SEM). EDS X-ray mapping is applied to study the final distribution of Al and Ni in the processed areas. In addition, the DC conductivity of the fabricated Ni wires obtained is measured. The proposed new method for selective chemical deposition of electroconductive Ni onto laser microstructured Ag/Al₂O₃/Al samples is simple, versatile and not restricted to the metal/ceramic system studied as well as to the electroless deposited metal.     

Physicochemical study of composite gel in the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> system

We show a feasibility of preparing a highly homogeneous composite gel (CG) based on hydrolysis products of Al₂O₃-ZrO₂ salts. The phase composition of a sample calcined at 1250°C for 2 h is as follows: α-Al₂O₃, t-ZrO₂, and m-ZrO₂ where the t-ZrO₂/m-ZrO₂ phase ratio ranges from 2.8 to 3.8 depending on gel preparation conditions. The investigative tools used are powder X-ray diffraction, differential thermal analysis (atmosphere: Ar), and IR spectroscopy.     

Co-Mo/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Ni-W/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts: Potential and prospects for use in hydrotreating of light cycle oil from catalytic cracking

Со-Мо/Al₂O₃ and Ni-W/Al₂O₃ catalysts were tested in hydrotreating of light cycle oil from catalytic cracking, of the straight-run gasoil, and of their mixture under typical hydrotreating conditions used in industry. The catalysts prepared using PMo₁₂ and PW₁₂ heteropoly acids exhibit high catalytic activity. The Со-Мо/Al₂O₃ catalyst is more active in hydrodesulfurization and hydrogenation of olefin and diene hydrocarbons, whereas the Ni-W/Al₂O₃ catalysts are more active in hydrogenation of mono- and polycyclic aromatic hydrocarbons. Comparison of the quality characteristics of the hydrogenizates obtained with the requirements of the technical regulations shows that the required levels of the sulfur content and cetane number of the hydrogenizates at practically accessible process parameters can be reached for mixtures of the straight-run gasoil and light cycle oil from catalytic cracking with high content of the latter component only when the process with the Со-Мо/Al₂O₃ system and Ni-W/Al₂O₃ catalysts is performed in two steps.     

Synthesis and Characterization of Al(OH)<Subscript>3</Subscript>, Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanoparticles and Polymeric Nanocomposites

Applying of the most toxic halogenated and aromatic flame retardants is limited with respect to the environmental requirements. Nontoxic Al(OH)₃ nanoparticles were synthesized via a simple surfactant-free precipitation reaction at room temperature. The effect of various precipitation-agents on the morphology of the products was investigated. Al(OH)₃ nanoparticles were added to the polysulfone and poly styrene (PS) matrices. Electron microscope images show excellent dispersion of aluminium hydroxide in PS matrix. Nanoparticles appropriately enhanced both thermal stability and flame retardant property of the polymeric matrices. The enhancement of flame retardancy is due to endothermic decomposition of Al(OH)₃ that absorbs heat and simultaneously releases of water (makes combustible gases diluted and cold). Dispersed nanoparticles play the role of a barrier layer against flame, oxygen and polymer volatilization. Al(OH)₃ was converted to Al₂O₃ and its photo-catalyst property in degradation three different organic dyes as pollutants was investigated.     

Experimental Studies on Isonicotinato Cadmium(II) Complex [Cd(C<Subscript>6</Subscript>H<Subscript>4</Subscript>NO<Subscript>2</Subscript>)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>4</Subscript>] and Density Functional Calculations

Isonicotinato cadmium(II) complex [Cd(C₆H₄NO₂)₂(H₂O)₄] has been synthesized by hydrothermal method and characterized by elemental analysis, electronic-spectra and thermogravimetric analysis. Density functional theory (DFT) method calculations of the structure, atomic charges distribution, electronic spectra, natural population analysis and the thermodynamic properties at different temperatures have been performed. The calculated results show the electronic transitions are mainly derived from the contribution of bands π → π^* and the decomposition of the title compound should first occur at the bond of Cd—O, then at the bond of Cd—N, which agrees very well with the experimental data.     

Thermal stability and catalytic properties of the composite amorphous Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-nanocrystals ZrO<Subscript>2</Subscript>

Catalytic properties in relation to the hydrogen oxidation reaction and thermal stability of materials based on the nanocomposite amorphous Al₂O₃-nanocrystalline ZrO₂ were studied.