Effect of Pressure on Clathrate Formation in a Water–Ethanol System

The water–ethanol (E) system was studied by differential thermal analysis (DTA) at atmospheric pressure and pressures up to 10 kbar. At atmospheric pressure, the system was shown to contain an incongruently melting hydrate of E · 2H₂O composition (t_decomp = -65.0°C). In addition, the system involves two metastable hydrates: E · 3H₂O (t_decomp = -69.0°C) and E · 4.75H₂O t_decomp = -74.5°C)}. The hydrate compositions were determined by Tamman's method for the corresponding temperature invariants. Studies at pressures below 10 kbar showed that E · 4.75H₂O metastable hydrate becomes stable at pressures above 0.25 kbar. At pressures from 1.0 to 7.3 kbar, this hydrate melts congruently, which allowed its composition to be determined more accurately. Presumably, this hydrate is of a semiclathrate nature (i.e., the ethanol molecule is involved in constructing the water framework) and has cubic structure I. In experiments at high pressures, E · 3H₂O was not found. Concerning E · 2H₂O hydrate, its peritectic melting was observed up to 5.0 kbar. Further extrapolation extends the incongruent melting curve to 7.5 kbar.     

Complexation of Dioxovanadium (V) with CDTA in the Water + Methanol Solvent System

The solvent effect has been studied in this research for the interaction of the $ {\text{VO}}_{2}^{ + } $ VO 2 + cation with trans-1,2-diaminocyclohexane-N, N, N′, N′- tetraacetic acid monohydrate at T = 298 K, I = 0.10 mol·dm^?3 sodium perchlorate, and in the range of 0–45 % water + methanol mixtures. UV absorbance data as a function of pH and dissociation constants, obtained from potentiometric titrations, were used for the determination of stability constants. The Kamlet–Abboud–Taft (KAT) model has been investigated for a plausible interpretation and calculation of the linear solvation energy relationship coefficient contribution to the formation of three species VO₂H₂L, VO₂HL^? and VO₂L^2?, which were identified in this work.     

Effect of Lead(II) Complexation on Solubility of β-PbO in Alkaline Solutions in the Presence of Certain Alcohols

Complex formation of lead(II) was studied, and the solubility of -PbO was determined by potentiometric titration in solutions containing sodium hydroxide (0.3-4 M) and a series of mono- and polyhydric alcohols. A correlation between the lead monoxide solubility and Pb(II) complex formation function was considered.     

The Role of Iron–Carbon Galvanic Contact in the Formation of Dispersed Iron Hydr(oxides) in Water and Electrolyte Solutions

The comparative analysis of phase formation on the iron surface in aqueous medium in the presence and absence of iron–carbon (coke) galvanic contact was carried out. The role of galvanic contact in phase formation processes was determined. It was shown that, in the presence of galvanic contact almost complete oxidation of iron ions on the surface of an iron half-element and a rather efficient stationary formation of dispersed phases serving as sorbents of heavy metals from solutions take place. The effect of anionic composition of solution on the parameters of phase formation was studied. It was established that maximal amount of iron–oxygen-containing phases is formed in zinc chloride solution. The presence of sulfate and nitrate ions in solution decreased significantly the rate of phase formation in iron–carbon galvanic contact.     

Complexation of Indole-3-acetic Acid with Iron(III): Influence of Coordination on the π-Electronic System of the Ligand

 The iron(III) complex of indole-3-acetic acid (1) was prepared, and its physicochemical properties, mode of iron(III) coordination, and electronic structure were studied using UV/Vis, diffuse reflectance infrared Fourier transform (DRIFT), and transmission ⁵⁷Fe M?ssbauer spectroscopic techniques. The data obtained provide evidence that iron(III) is not only coordinated by the carboxylic O-donor atom, but also via the conjugated π-electronic system of the pyrrole moiety involving both the non-shared electronic pair of the heteroatom and the C(2)*C(3) double bond. Considering the well-known increased sensitivity of the pyrrole residue in indole derivatives to oxidation as compared to the benzene ring, as well as the formation of a triple complex (peroxidase-1-O₂) proposed for the enzymatic 1 oxidative degradation mechanism involving as a key step the Fe³⁺ → Fe²⁺ transition in the enzyme form as discussed in literature, it is concluded that iron(III) coordination with 1 can influence the redox properties of the pyrrole ring by affecting its π-electronic system.     

Complexation of Indole-3-acetic Acid with Iron(III): Influence of Coordination on the π-Electronic System of the Ligand

Summary.  The iron(III) complex of indole-3-acetic acid (1) was prepared, and its physicochemical properties, mode of iron(III) coordination, and electronic structure were studied using UV/Vis, diffuse reflectance infrared Fourier transform (DRIFT), and transmission ⁵⁷Fe M?ssbauer spectroscopic techniques. The data obtained provide evidence that iron(III) is not only coordinated by the carboxylic O-donor atom, but also via the conjugated π-electronic system of the pyrrole moiety involving both the non-shared electronic pair of the heteroatom and the C(2)*C(3) double bond. Considering the well-known increased sensitivity of the pyrrole residue in indole derivatives to oxidation as compared to the benzene ring, as well as the formation of a triple complex (peroxidase-1-O₂) proposed for the enzymatic 1 oxidative degradation mechanism involving as a key step the Fe³⁺ → Fe²⁺ transition in the enzyme form as discussed in literature, it is concluded that iron(III) coordination with 1 can influence the redox properties of the pyrrole ring by affecting its π-electronic system. Received September 17, 2000. Accepted (revised) October 31, 2000     

Formation of Diazepam–Lanthanides(III) Complexes in the 50–50 Volume % Ethanol–Water Solvent System and Study of the Effect of Temperature on the Complex Formation Constants

Diazepam (7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one) is an important derivative of the 1,4-benzodiazepine compound commercially distributed as Valium. The complex formation constants of diazepam with some light lanthanide(III) metal ions have been studied by potentiometric measurements. All titrations were performed in 50–50% (volume/volume) ethanol–water solvent mixtures at constant ionic strength (0.10 mol⋅dm⁻³). The ionic strength was maintained by using sodium perchlorate. The complex formation constants were determined at 25.00, 35.00 and 45.00 °C. With increasing temperature, a decrease was observed in the protonation constant (pK) of diazepam.     

Heat Effect of the Protonation of Glycine and the Enthalpies of Resolvation of Participating Chemical Species in Water–Dimethylsulfoxide Solvent Mixtures

Enthalpies of the protonation of glycine in water?dimethylsulfoxide (DMSO) mixed solvents are determined calorimetrically in the range of DMSO mole fractions of 0.0 to 0.9, at T = 298.15 K and an ionic strength μ = 0.3 (NaClO₄). It is established that the protonation of glycine becomes more exothermic with an increasing mole fraction of DMSO, and the enthalpies of resolvation of glycine and glycinium ions in water?DMSO solvent mixtures are calculated. It is shown that the small changes in the enthalpy of protonation observed at low mole fractions of DMSO are caused by the contributions from the solvation of proton and protonated glycine cancelling each other out. The enthalpy term of the Gibbs energy of the reaction leading to the formation of glycinium ion is estimated along with the enthalpy of resolvation of the reacting species in the water?DMSO mixed solvent.     

The Influence of Di-(2-Ethylhexyl)Phosphoric Acid on the Properties of Microemulsion in the Sodium Di-(2-Ethylhexyl)Phosphate–Di-(2-ethylhexyl)Phosphoric Acid–Decane–Water System

It has been shown that the presence of small amounts of di-(2-ethylhexyl)phosphoric acid (below 6 mol % in the mixture of surfactants) in a sodium di-(2-ethylhexyl)phosphate–di-(2-ethylhexyl)phosphoric acid–decane–water system widens the region of microemulsion existence with respect water and decreases the slope of the dependence of hydrodynamic droplet diameter of on water-to-sodium di-(2-ethylhexyl) phosphate molar ratio. At di-(2-ethylhexyl)phosphoric acid concentrations in its mixture with sodium di-(2-ethylhexyl)phosphate higher than 6 mol %, the fraction of water bound with ions in microemulsion droplets decreases, the region of microemulsion existence narrows, specific conductance decreases, and the slope of the dependence of the hydrodynamic droplet diameter of on the water-to-sodium di-(2-ethylhexyl) phosphate molar ration increases.     

Effect of Cationic and Zwitterionic Surfactants on Contact Angle of Quartz–Water–Crude Oil System

The influences of four cationic surfactants hexadecyl glycidyl ether ammonium chloride and four zwitterionic surfactants hexadecyl glycidyl ether glycine Betaine solutions on contact angle of crude oil on a quartz surface were investigated using a captive drop method. The effects of surfactant type, structure, and concentration on contact angle were expounded. From obtained results it appears that the adsorbed surfactant at oil–water interface reduces the interfacial tension and the adsorption at quartz–water interface improves interfacial free energy, which results in reducing the stable value of contact angle and weakening dynamic behavior. At high concentration, the zwitterionic surfactant with branched-chain may form semi-micelle at quartz surface. As a result, the stable value of contact angle passes through a sharp minimum with the increasing concentration.     

Effect of Thallium Adatoms on Electrode Processes in the System Gold–Cyanide Solutions

The possibility of determining kinetic parameters of the gold electrodeposition in the presence of thallium adatoms is considered. The coverage of the electrode surface by thallium adatoms is monitored. The steady-state values of potential used correspond to current densities i that are directly proportional to the concentration of thallium ions in solution. The procedure is based on the assumption that the rate of incorporation of adatoms is proportional to the product i. With increasing to 0.25, the exchange current and transfer coefficient increase from 5 × 10^–5 A cm^–2 and 0.23 in pure solutions to1.5 × 10^–4 A cm² and 0.6 at = 0.25–0.3, whereas the reaction order by cyanide ions remains practically invariant with increasing . Variations in the kinetic parameters with are compared to similar measurements obtained earlier for the anodic process. These may be made consistent by assuming that mechanisms of cathodic and anodic reactions differ in pure solutions and are identical in the presence of catalytically active adatoms. An explanation to the above regularities is given.     

Effect of the Composition of Ethanol–Water Mixtures on the Properties of Oxide (Zn-Zr-Si) and Zeolitic (Ta/SiBEA) Catalysts in the Production of 1,3-Butadiene

Theoretical and Experimental Chemistry - The reasons for the deactivating effect of water on the conversion of ethanol to 1,3-butadiene in the presence of Zn-Zr(La)-Si oxide and Cu(Ag, Zn)/Ta/SiBEA...     

Phase Diagram of the Benzene–Dinitratotetrapyridinecopper(II) (Guest–Host) System and Thermodynamic Parameters for the Hostβ2Guest Clathrate Dissociation

In the first part of the work, thephase diagram of the benzene -ndash;[CuPy⁴(NO³)²] system has beendetermined in the -100 to +200 °C temperaturerange using DTA and solubility techniques. The onlycompound found in the system is the[CuPy⁴(NO³)²] 2C⁶H⁶clathrate. It is stable up to a temperature of+104.2(5) °C at which it melts incongruently togive liquid and the solid [CuPy⁴(NO³)²]host phase. At 146.1(5) °C exfoliation into twoliquid phases is observed, with the composition of themonotectic point being close to that of the clathrate.In the second part of the work, thermodynamicparameters of the clathrate dissociation have beendetermined from benzene vapour pressure strainmeasurements. For the process1/2 [CuPy⁴(NO³)²]2C⁶H⁶(solid) = 1/2 [CuPy⁴(NO³)²] (solid) +C⁶H⁶ (gas) H° = 45.3(3) kJ/mole; S₂₉₈° = 126(1) J/(mole K); G₂₉₈° = 7.7(5) kJ/mole.     

Effect of Temperature on the Solubility of Short-Chain Carboxylic Acids in Water

The aqueous solubilities of pentanoic and hexanoic acids were measured between 298.15 and 333.15 K at intervals of 5.00 K. Nonlinear dependences were found for the variation of solubility with temperature. The temperature dependences of the solubility of the acids in water are described by nonlinear van’t Hoff plots. Experimental data were fitted by the method of least-squares to a second-order polynomial equation, which was then used to determine the differential solution enthalpies at selected temperatures. The values for the apparent Gibbs energy and the apparent entropy of solution are calculated.     

Determination of Iron in Tap and Waste Water Using Liquid–Liquid Extraction in a Flow-Injection System

A flow-injection procedure for the determination of iron(III) in water is described. The procedure is based on the formation of an ion pair between the tetraphenylarsonium (Ph₄As⁺) (TPA) or tetrabutylammonium (But₄N⁺) (TBA) cations and the tetrathiocyanatoferrate(III) complex (TTF). This ion pair is extracted with chloroform, and the absorbance of the organic phase is measured at 503nm (for Ph₄As⁺) or 475nm (for But₄N⁺). Iron concentrations higher than 0.9×10^–6molL^–1 (50µgL^–1) can be detected in the first case, with a relative standard deviation of 1.9% (n=12), a linear application rangeof between 1.34 and 54.0×10^–6molL^–1 (75–3015µgL^–1), and a sampling frequency of 30h^–1. For the ion pair with But₄N⁺, the detection limit is 0.52×10^–6molL^–1 (29µgL^–1), with a relative standard deviation of 1.6% and a linear application range between 0.73 and 54.0×10^–6molL^–1. Under the proposed working conditions, only Pd(IV), Cu(II) and Bi(III) interfere. With the application of the merging zones technique, considerable amounts of organic reagent can be saved. The TBA method was applied to the analysis of iron(III) in tap and industrial waste waters.     

Effect of alkyl group on the structure of heterodinuclear Zn(II)–Cu(II) and Zn(II)–Ni(II) complexes derived from unsymmetrical phenol-based dicompartmental macro-acyclic ligands

A series of mono- and heterodinuclear macro-acyclic complexes of [ZnLCu(II)]²⁺ and [ZnLNi(II)]²⁺ were synthesized by a stepwise procedure. The phenol-based macro-acyclic dicompartmental ligands (L^2?) possess contagious hexadentate (N₄O₂) and tetradentate (N₂O₂) coordination sites, where in the mononuclear complexes [ZnL(H⁺)₂]²⁺ the latter site containing two alkyl-imine donor groups (ethyl or isopropyl) is attached to the azomethine moieties. The alkyl group(s) is eliminated upon introduction of the second metal (II) ion into N₂O₂ coordination site as a result of steric crowding of the alkyl groups along with the lack of flexibility associated with the imine groups. When the second metal ion is Cu(II) and R = isopropyl, the both of them are eliminated but when R = Et only one ethyl group is removed. However, in case of Ni(II) as the second metal ion, the both alkyl groups are eliminated regardless of the nature of the alkyl group. The origins of the structural variations are discussed. The prepared complexes were characterized by elemental analysis, molar conductance measurements, X-ray crystallography, IR, NMR and UV–Vis spectroscopies.     

The Effect of pH Difference Between Two Phases on the Partition of Lysozyme in Aqueous Two-Phase System

Aqueoustwo-phasesystems(ATPS)areformedwhentwoaqueoussolutionsofhydrophilicpolymersorapolymerandasaltaremixedathighconcentration.Forthechargedproteins,AlbertssonhasdevelopedtheclassicalmodelfortheelectrochemicalpartitioninginATPSfInK,=lnK, (Z,F/RT)Arp(l)HereK,denotesthepartitioncoefficientofproteins,InK,includesalltheotherfactorsaffectingproteinpartitioning,and(Z,F/RT)A(PistheelectrostatictermasaproductofproteinsurfacechargeZPandAam,theelectrostaticpotentialdifferencebetweenthetwopha…     

Effect of Demulsifier Structures on the Interfacial Dilational Properties of Oil–Water Films

The dilational properties of a branch-shaped polyether-type nonionic demulsifier (PEB), a comb-shaped polyether-type nonionic demulsifier (PEC), and a star-shaped polyether-type nonionic demulsifier (PES) at the decane–water interfaces were investigated by Langmuir trough method through oscillating barrier and interfacial tension relaxation methods, which are mainly in the influences of oscillating frequency and bulk concentration on dilational properties. Meanwhile, the effect of demulsifiers on interfacial dilational modulus of diluted crude oil was also explored. The experimental results indicate that all demulsifiers can decrease the dilational modulus of diluted crude oil at the experimental concentration. The addition of PEB causes the dilational modulus of crude oil to be lower than that at the water–decane interface. The demulsifier PEC has a similar effect with PES to influence the interfacial film of crude oil: at low concentration, the dilational modulus of mixed interfacial film is lower than that of demulsifier alone, while at high concentration, the dilational modulus of mixed interfacial film is slightly higher than that of demulsifier alone. The dependence of static modulus on the bulk concentration is consistent with the trend of interfacial dilational modulus with concentration for demulsifiers PEB, PEC, and PES. The studies about the structure modulus show that the new demulsifiers PEC and PES have a stronger ability than branch-shaped demulsifier PEB to destroy the interfacial film.