Nucleophilic Reactivity of Hydroxide and Hydroperoxide Ions in Aqueous-Alcoholic Media and of HCO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> Ion in Water

Nucleophilic reactivity of hydroxide and hydroperoxide ions toward ethyl 4-nitrophenyl ethylphosphonate, diethyl 4-nitrophenyl phosphate, 4-nitrophenyl 4-toluenesulfonate, and 4-nitrophenyl dimethylcarbamate in the system H₂O₂-KOH was studied in aqueous-alcoholic solutions at 25°C. The rate of reactions of both anions with ethyl 4-nitrophenyl ethylphosphonate, diethyl 4-nitrophenyl phosphate, and 4-nitrophenyl dimethylcarbamate and of hydroxide ion with 4-nitrophenyl 4-toluenesulfonate increases with rise in the fraction of the alcohol in mixtures of water with isopropyl and tert-butyl alcohols, while the reaction rate of hydroperoxide ion with 4-nitrophenyl 4-toluenesulfonate decreases. The rate of reactions of both anions with all the above substrates in mixtures of water with ethylene glycol decreases as the fraction of the latter rises. The apparent rate of the reaction of ethyl 4-nitrophenyl ethylphosphonate with anionic nucleophiles in the system H₂O₂-HO^?-HCO ₃ ^? in water at pH 8.5 almost does not depend on the concentration of ammonium hydrogen carbonate up to a value of 1 M, and it increases when the NH₄HCO₃ concentration exceeds 1 M. Mixtures of water with the lower monohydric alcohols were recommended for use as components of H₂O₂-HO^?-HCO ₃ ^? systems for oxidative decomposition of ecotoxicants.     

Interactions between AuCl<Subscript>4</Subscript><Superscript>−</Superscript> and CTA<Superscript>+</Superscript> ions in water

The solubility of hexadecyltrimethylammonium tetrachloroaurate (CTA·AuCl₄) in water was measured at different temperatures of 288.2, 293.2, 298.2, 303.2, and 308.2 K. The enthalpy change associated with the formation of the CTA·AuCl₄ precipitate was estimated on the basis of the van’t Hoff equation and was found to be −42.5 ± 2.8 kJ mol⁻¹ at 298.2 K. The calorimetric enthalpy change for the CTA·AuCl₄ precipitate formation was directly determined by isothermal titration calorimetry performed at 298.2 K and was found to agree well with that estimated from the van’t Hoff equation.     

Identification of Anionic Supramolecular Complexes of Sulfonamide Receptors with Cl<Superscript>−</Superscript>, NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> by APCI-MS

As part of a mass spectrometric investigation of the binding properties of sulfonamide anion receptors, an atmospheric pressure chemical ionization mass spectrometric (APCI-MS) method involving direct infusion followed by thermal desorption was employed for identification of anionic supramolecular complexes in dichloromethane (CH₂Cl₂). Specifically, the dansylamide derivative of tris(2-aminoethyl)amine (tren) (1), the chiral 1,3-benzenesulfonamide derivatives of (1R,2S)-(+)-cis-1-amino-2-indanol (2), and (R)-(+)-bornylamine, (3), were shown to bind halide and nitrate ions in the presence of (n−Bu)₄N⁺X⁻ (X⁻ = Cl⁻, NO₃⁻, Br⁻, I⁻). Solutions of receptors and anions in CH₂Cl₂ were combined to form the anionic supramolecular complexes, which were subsequently introduced into the mass spectrometer via direct infusion followed by thermal desorption. The anionic supramolecular complexes [M+X]⁻, (M=1–3, X⁻=Cl⁻, NO₃⁻, Br⁻, I⁻) were observed in negative mode APCI-MS along with the deprotonated receptors [M−H]⁻. Full ionization energy of the APCI corona pin (4.5 kV) was necessary for obtaining mass spectra with the best signal-to-noise ratios.     

The Hydrolysis of AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> and the Stability of Aquachlorohydroxocomplexes of Gold(III) in Aqueous Solution

The equilibria AuCl₄⁻+jOH⁻+kH₂O⇌AuCl_4−j−k (OH) _j (H₂O) _k ^k−1+(j+k)Cl⁻, β _jk (0≤j,k≤4) have been studied spectrophotometrically at 20 °C in aqueous solution. For I=2 mol⋅dm⁻³(HClO₄) the conventional constants, β _i ^*, of the equilibria, Au^*+iCl⁻ ⇌AuCl _i ^*, are equal to log ₁₀ β ₁^*=(6.98±0.08); log ₁₀ β ₂^*=(13.42±0.05); log ₁₀ β ₃^*=(19.19±0.09); and log ₁₀ β ₄^*=(24.49±0.07), where [AuCl _i ^*]=∑[AuCl _i (OH) _j (H₂O)_4−i−j ] at i=const. The hydrolysis and other transformations of AuCl₄⁻ in aqueous solution are discussed. On the basis of new and known data, a full set of equilibrium constants, β _jk , or their estimates has been obtained.     

Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

Influence of ion size on the stability of chloroplumbates containing PbCl<Stack><Subscript>5</Subscript><Superscript>−</Superscript></Stack> or PbCl<Stack><Subscript>6</Subscript><Superscript>2−</Superscript></Stack>

The enthalpies of formation of PbCl₄, PbCl₅⁻ and PbCl₆²⁻, originating from quantum mechanics, have enabled the thermodynamic behaviour of these ions with respect to Cl-detachment to be assessed. The stability of salts containing PbCl₅⁻ and PbCl₆²⁻ as a function of the dimensions of these anions and complementary cations was studied using an approach combining the Kapustinskii-Yatsimirskii equation with basic thermochemical relationships. It was found that hexachloroplumbates of monovalent metal cations will not dissociate into metal chlorides and PbCl₄, provided the complementary cations are suitably large in size. Hexachloroplumbates of divalent metal cations have not yet been synthesised since no known metal cations attain the requisite large size. Such salts will not dissociate if the divalent metal cations are able to complex suitably large electron-donating ligands. The pentachloroplumbates of both monovalent and divalent metal cations are unstable, since no known metal cations have appropriately large ionic radii. The approach adopted appears to be useful for the examination of the thermal behaviour, stability and reactivity of chloroplumbates.     

Comparison of Magnetic Properties between Spin Singlet and Triplet Li<Subscript>3</Subscript>Al<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> Clusters

With a second-order Møller–Plesset perturbation theory and Hartree–Fock nuclear magnetic resonance calculations, we investigated the magnetic properties of spin singlet and triplet Li₃Al ₄ ^? clusters. The obtained gauge-independent atomic orbital magnetic shielding tensors confirm the paramagnetism of singlet Li₃Al ₄ ^? and diamagnetism of the triplet. The planar rings composed of four aluminum atoms make the magnetic properties of Li₃Al ₄ ^? clusters versatile. The localized molecular orbital, low symmetry of geometric conformation and narrow gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital are found to correlate with the paramagnetism of singlet Li₃Al ₄ ^? . The origin of the paramagnetism is explained. In triplet Li₃Al ₄ ^? , the two outmost orbitals are degenerate, causing a conversion from the paramagnetism to diamagnetism.     

A new method of synthesis of the B<Subscript>3</Subscript>H<Stack><Subscript>8</Subscript><Superscript>−</Superscript></Stack> anion

A new method of synthesis of the B₃H₈⁻ anion has been suggested. The method uses the reaction of some metal halides (CuCl, SnCl₂, CrCl₃, PbF₂, PbCl₂, PbBr₂, and BiCl₃) with sodium tetrahydroborate. It is characterized by high (up to quantitative) yields and simplicity of isolation of the target products ((n-C₄H₉)₄N)[B₃H₈] and Cs[B₃H₈].     

The ESCA analysis of the B<Subscript>3</Subscript>H<Stack><Subscript>8</Subscript><Superscript>−</Superscript></Stack> anion

Compounds [Et₄N]₂B₃H₈ and CsB₃H₈ are studied using the ESCA method. The results of analysis of the B1s electron spectra and estimation of the effective charge differences in [Et₄N]₂B₃H₈ are compared to the data of theoretical calculations of the B₃H₈⁻ anion.     

Chemical Bonding in the Complexes XeF<Stack><Subscript>5</Subscript><Superscript>+</Superscript></Stack>XF<Stack><Subscript>6</Subscript><Superscript>−</Superscript></Stack> (X = P,As, Sb,and Bi)

Ab initio quantum-chemical calculations of the complexes XeF ₅ ⁺ XF ₆ ^? (X = P, As, Sb, and Bi) were performed with the use of relativistic pseudopotentials for heavy atoms and full-electron basis sets. The chemical bonds were characterized by the parameters of critical points (electron density, its Laplacian, total electron energy, and its kinetic and potential components). It was demonstrated that the interaction between the XeF ₅ ⁺ cation and the XF ₆ ^? anion in XeF ₅ ⁺ XF ₆ ^? follows a key-lock scheme involving directed interactions of bridging fluorine atoms F_b → Xe and that the structuring function of the lone electron pair of the Xe atom is to compensate the destabilizing electrostatic interaction between the Xe and X atoms bearing excess positive charges.     

Study on nonlinear kinetic and thermodynamics of oscillating reaction of amino Acid-BrO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>-Mn<Superscript>2+</Superscript>-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-acetone system

With the help of the kinetic parameters (the rate constant (k _in k _p) and the apparent activation energy (E _in E _p) of the oscillatory induction period and oscillation period) of the oscillating reaction using thirteen amino acids, leucine (Leu), threonine (Thr), arginine (Arg), lysine (Lys), histidine (His), alanine (Ala), glutamine (Glu), glycine (Gly), methionine (Met), cystine (Cys), tryptophan (Trp), serine (Ser) and tyrosine (Tyr), as organic substrates in amino acid-BrO₃⁻-Mn²⁺-H₂SO₄-acetone system, then based on the Oregonator model and the thermodynamics theory on irreversible process, the thermodynamic function (ΔH _in, ΔG _in, ΔS _in and ΔH _p, ΔG _p, ΔS _p) of these oscillating system are studied. The results indicate the entropy ΔS of these oscillating reaction are negative, thereby it is proved that the oscillating reaction is a noequilibrium system with dissipation structure in agreement with the character of the oscillating reaction from disorder to order in irreversible thermodynamics. These are satisfactorily to explain the experimental phenomena.     

The effect of NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack> and OH<Superscript>−</Superscript> ions on the laser ablation of Cs<Superscript>+</Superscript> ion on Type 304 stainless steel

Type 304 stainless steel specimens artificially contaminated with CsCl solution were treated with KOH solution and KNO₃ solution, respectively. Cs⁺ ion removal tests by a Q-switched Nd:YAG laser at 1064 nm at a given fluence of 57.3 J/cm² were performed. The surface morphology and the relative atomic mole ratio of the specimen surface were investigated by SEM and EPMA. The order of Cs⁺ ion removal efficiency of laser was no-treatment < KOH < KNO₃ during the 42 shots. From the investigation of XPS peaks around 532.7 and 292.9 eV, KNO₃ on a surface of specimen was found to be fully decomposed during the laser irradiation. It was suggested that Cs₂O particulates formed by the reaction between the reactive oxygen generated from the nitrate ion and Cs⁺ ion on the metal surface could be easily suspended. For the KOH system, FeOOH was formed during the laser irradiation and it changed into Fe₂O₃. It was also suggested that Cs₂O particulates were formed by the reaction between the reactive oxygen generated from the decomposition of K₂O and Cs⁺ ion on the metal surface..     

Preparation of nano-SO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack>/TiO<Subscript>2</Subscript> catalyst and its application in esterification of sebacic acid with 2-ethyl hexanol

A pure anatase phase nano-SO₄²⁻ /TiO₂ catalysts were synthesized and their catalytic activities were tested. Nano-SO₄²⁻/TiO₂ shows high activity and effective re-usable when used as basic catalysts for the synthesis of dioctyl sebacate.     

A molecular dynamics simulation of H<Subscript>3</Subscript>PO<Subscript>4</Subscript>, H<Subscript>2</Subscript>PO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack>, and the protonated form of N,N-dimethylformamide in liquid N,N-dimethylformamide

The molecular dynamics simulation method was for the first time used to study the structural and energy parameters of H₃PO₄, H₂PO₄⁻, and (DMFA)H⁺ (protonated dimethylformamide) in liquid N,N-dimethylformamide. The predominant orientation of the nearest neighbors of H₃PO₄, H₂PO₄⁻, DMFA, and (DMFA)H⁺ was determined from ranked distribution functions. The most probable structure of H-bonded complexes was obtained. It was shown that H₃PO₄ formed H-bonds with two DMFA molecules, and and (DMFA)H⁺ formed H-bonds with one molecule. The dependence of Coulomb interaction energies on the distance between H₃PO₄, H₂PO₄⁻, (DMFA)H⁺, and DMFA had the form of damped oscillations, as is characteristic of intermolecular interactions in pure DMFA. The molecular dynamics simulation of the H₂PO₄⁻-(DMFA)H⁺-DMFA ternary system showed a high probability of the formation of contact ion pairs.     

Synthesis and Structure of the bismuth complex [Ph<Subscript>3</Subscript>PrP]<Stack><Subscript>4</Subscript><Superscript>+</Superscript></Stack>[Bi<Subscript>4</Subscript>I<Subscript>16</Subscript>]<Superscript>4−</Superscript>

The complex [Ph₃P] ₄ ⁺ [Bi₄I₁₆]^4? · 2 Me₂C=O (I) was synthesized by the reaction of triphenyl(propyl)phosphonium iodide with bismuth iodide in acetone. The crystal structure of complex I was determined by X-ray crystallography. It contains, in addition to solvent molecules, two types of crystallographically independent tetrahedral tetraphenyl(propyl)phosphonium cations and tetranuclear anions [Bi₄I₁₆]^4? in a chair conformation with the bismuth atoms being in an octahedral coordination. The Bi-I distances in the anion vary within 2.8768(4)–3.2524(4) Å.     

Theoretical study of the activation barriers of elementary reactions of hydrogenation of aluminide clusters X@Al<Subscript>12</Subscript> and X@Al<Stack><Subscript>12</Subscript><Superscript>−</Superscript></Stack> with dopants X = Al,Si, and Ge

The transition states and activation barriers h of elementary reactions of addition of the H₂ molecule to aluminide clusters Al₁₃, Al ₁₃ ^? , Al₁₃H ₂ ^? , Al₁₃H ₄ ^? , Si@Al₁₂, Ge@Al₁₂, and LiAl₁₃ were calculated within the B3LYP approximation of the density functional theory using 6–31G* and 6–311+G* basis sets. The barriers h for all diamagnetic clusters were found to be high (～30–40 kcal/mol). The outer-sphere cation Li⁺ decreases while the endohedral electronegative dopants Si and Ge increase the barrier by a few kcal/mol. The hydrogenation barrier of the neural paramagnetic cluster Al₁₃, which has free valence, decreases to ～20 kcal/mol. The addition of a hydrogen atom or a Cl₂ molecule to both paramagnetic and diamagnetic aluminum clusters occurs without a barrier. The first stage of the reaction (addition of H₂ to an Al-Al edge) is in all cases the critical stage of aluminide hydrogenation. The barrier h of this reaction is several times higher than the barriers to migration of hydrogen atoms over the metal cage. The migration of H atoms occurs simultaneously with considerable distortions of the Al₁₃ cage even to the extent that it changes its structural motif. The addition of the H₂ molecule to the Al@TiAl₁₁ cluster containing the peripheral titanium atom occurs with a small barrier, whereas the barrier to elimination of H₂ from the dihydride Al@TiAl₁₁H₂ is reduced to ～15 kcal/mol. Based on the calculations, the conclusion was drawn that the elementary reactions of hydrogenation and dehydrogenation for Ti-doped aluminide clusters should occur considerably faster and under milder conditions than for homonuclear aluminides.     

Gas Chromatographic-Ion Trap Mass Spectrometric Analysis of Volatile Organic Compounds by Ion–Molecule Reactions Using the Electron-Deficient Reagent Ion CCl<Stack><Subscript>3</Subscript><Superscript>+</Superscript></Stack>

When using tetrachloromethane as the reagent gas in gas chromatography-ion trap mass spectrometry equipped with hybrid ionization source, the cation CCl₃⁺ was generated in high abundance and further gas-phase experiments showed that such an electron-deficient reagent ion CCl₃⁺ could undergo interesting ion–molecule reactions with various volatile organic compounds, which not only present some informative gas-phase reactions, but also facilitate qualitative analysis of diverse volatile compounds by providing unique mass spectral data that are characteristic of particular chemical structures. The ion–molecule reactions of the reagent ion CCl₃⁺ with different types of compounds were studied, and results showed that such reactions could give rise to structurally diagnostic ions, such as [M + CCl₃ – HCl]⁺ for aromatic hydrocarbons, [M – OH]⁺ for saturated cyclic ether, ketone, and alcoholic compounds, [M – H]⁺ ion for monoterpenes, M^·+ for sesquiterpenes, [M – CH₃CO]⁺ for esters, as well as the further fragment ions. The mechanisms of ion–molecule reactions of aromatic hydrocarbons, aliphatic ketones and alcoholic compounds with the reagent ion CCl₃⁺ were investigated and proposed according to the information provided by MS/MS experiments and theoretical calculations. Then, this method was applied to study volatile organic compounds in Dendranthema indicum var. aromaticum and 20 compounds, including monoterpenes and their oxygen-containing derivatives, aromatic hydrocarbon and sesquiterpenes were identified using such ion–molecule reactions. This study offers a perspective and an alternative tool for the analysis and identification of various volatile compounds.     

SO<Stack><Subscript>2</Subscript><Superscript>−·</Superscript></Stack> electron transfer ion/ion reactions with disulfide linked polypeptide ions

Multiply-charged peptide cations comprised of two polypeptide chains (designated A and B) bound via a disulfide linkage have been reacted with SO2-* in an electrodynamic ion trap mass spectrometer. These reactions proceed through both proton transfer (without dissociation) and electron transfer (with and without dissociation). Electron transfer reactions are shown to give rise to cleavage along the peptide backbone, loss of neutral molecules, and cleavage of the cystine bond. Disulfide bond cleavage is the preferred dissociation channel and both Chain A (or B)-S* and Chain A (or B)-SH fragment ions are observed, similar to those observed with electron capture dissociation (ECD) of disulfide-bound peptides. Electron transfer without dissociation produces [M + 2H]+* ions, which appear to be less kinetically stable than the proton transfer [M + H]+ product. When subjected to collision-induced dissociation (CID), the [M + 2H]+* ions fragment to give products that were also observed as dissociation products during the electron transfer reaction. However, not all dissociation channels noted in the electron transfer reaction were observed in the CID of the [M + 2H]+* ions. The charge state of the peptide has a significant effect on both the extent of electron transfer dissociation observed and the variety of dissociation products, with higher charge states giving more of each.     

Computational studies of the interactions of I<Superscript>−</Superscript> and I<Subscript>3</Subscript><Superscript>−</Superscript> with TiO<Subscript>2</Subscript> clusters: implications for dye-sensitized solar cells

Abstract  

First principle density-functional theory calculations have been carried out on the interaction of I⁻ and I₃ ⁻ with TiO₂ anatase surfaces, modeled by finite clusters that range in size from 48 to 180 atoms. The total energy per TiO₂ unit and the HOMO-LUMO gaps decrease with increasing the size of the clusters. Both redox species (I⁻ and I₃ ⁻) are strongly adsorbed on the TiO₂ surface with the adsorbtion of I⁻ being stronger. Adsorption of triiodide leads to its dissociation. The positions of the HOMO and LUMO of the adsorbed systems shift negatively from their respective cluster values. Solvation effects have been modeled using the CPCM model. Introducing solvent reduces the shifting of HOMO and LUMO. Implications for dye-sensitized solar cells (DSSC) are discussed. Both the HOMO-LUMO shifting and the strong adsorption might affect the performance of the cell.     

The undecahydrodecaborate anion B<Subscript>10</Subscript>H<Stack><Subscript>11</Subscript><Superscript>−</Superscript></Stack> as the starting reagent in exopolyhedral substitution and complexation: Theoretical and experimental prerequisites

Using the electron density functional theory (B3LYP approximation) with the 6-31G* basis set, the potential energy surface of the undecahydrodecaborate anion B₁₀H₁₁⁻ was calculated and the activation energies and the activation barriers for the elementary reactions of proton H* migration around the boron polyhedron were estimated. Analysis of the calculation results in comparison with the experimental data accumulated recently implies that the salts of the B₁₀H₁₁⁻ anion represent a new type of starting compounds for exopolyhedral substitution and complexation involving decaborate anions. Of particular interest is the targeted preparation of isomers of metal complexes containing a decaborate anion depending on the use of B₁₀H₁₀²⁻ or B₁₀H₁₁^¨- as the starting reagent. Certain trends in the reactivity of B₁₀H₁₀⁻ and B₁₀H₁₁⁻ anions can be explained in terms of the simple analysis of Mulliken charge distribution on atoms.