Neue mehrkernige Indium–Stickstoff‐Verbindungen – Synthese und Kristallstrukturen von [In4X4(NtBu)4] (X = Cl,Br, I) und [In3Br4(NtBu)(NHtBu)3]

New Polynuclear Indium Nitrogen Compounds – Synthesis and Crystal Structures of [In₄X₄(N^tBu)₄] (X = Cl, Br, I) and [In₃Br₄(N^tBu)(NH^tBu)₃] The reaction of the indium trihalides InX₃ (X = Cl, Br, I) with LiNH^tBu in THF leads to the In₄N₄‐heterocubanes [In₄X₄(N^tBu)₄] (X = Cl 1 , Br 2 , I 3 ). Additionally [In₃Br₄(N^tBu)(NH^tBu)₃] ( 4 ) was obtained as a by‐product in the synthesis of 2 . 1 – 4 have been characterized by x‐ray crystal structure analysis. 1 – 3 consist of In₄N₄ heterocubane cores with an alternating arrangement of In and N atoms. The In atoms are coordinated nearly tetrahedrally by three N‐atoms and a terminal halogen atom. 4 contains a tricyclic In₃N₄ core which can be formally derived from an In₄N₄‐heterocubane by removing one In atom.     

Die neuen gemischtvalenten Chalkogenoindate MIn7X9 (M = Rb,Cs; X = S,Se): Strukturchemie,Röntgenund HRTEM‐Untersuchungen

The New Mixed Valent Chalcogenoindates MIn₇X₉ (M = Rb, Cs; X = S, Se): Structural Chemistry, X‐Ray and HRTEM Investigations Systematic X‐ray and HRTEM investigations on the ternary systems alkali metal (or thallium)–indium–chalcogen proved the existence of mixed valent solids with the simultaneous occurrence of indium species in different states of oxidation. Additionally to the earlier described solids MIn₅S₇ (M: Na, K, Tl: isotypic to InIn₅S₇ = In₆S₇ and TlIn₅S₇) and KIn₅S₆ (isotyp to TlIn₅S₆) in the actual work we present with MIn₇X₉ (M: Rb, Cs; X: S, Se) a new structure type which also contains indium in the states of oxidation +3 and +2. The formal state of oxidation In²⁺ corresponds to (In₂)⁴⁺ ions. A reasonable ionic formulation of these structures is given by: MIn₅S₇ = M⁺ 3[In³⁺] [(In₂)⁴⁺] 7[S^2–] (M = Na, K, Tl), MIn₅S₆ = M⁺ [In³⁺] 2[(In₂)⁴⁺] 6[S^2–] (M = K, Tl), MIn₇X₉ = M⁺ 3[In³⁺] 2[(In₂)⁴⁺] 9[S^2–]. The three structure types show common two dimensional structure elements which contain ethane analogous In₂X₆ units and cis and trans edge sharing double octahedron chains. The main interest of this work is a crystalchemical discussion taking into account the new compounds MIn₇X₉ and the results of special HRTEM investigations on MIn₇X₉. The HRTEM investigations aim on the identification and subsequent preparation of new phases which initially might be visible as nano size crystals or inclusions in the HRTEM only.     

Gd3Pt4In12 and Tb3Pt4In12 — New Ternary Indides with Condensed Distorted [PtIn6] Trigonal Prisms

The ternary indium compounds Gd₃Pt₄In₁₂ and Tb₃Pt₄In₁₂ were synthesized from an indium flux. Arc‐melted precursor alloys with the starting compositions ∼GdPtIn₄ and ∼TbPtIn₄ were annealed with a slight excess of indium at 1200 K followed by slow cooling (5 K/h) to 870 K. Both compounds were investigated by X‐ray powder diffraction: a = 990.5(1), c = 1529.5(3) pm for Gd₃Pt₄In₁₂ and a = 988.65(9), c = 1524.0(1) pm for Tb₃Pt₄In₁₂. The structure of the gadolinium compound was solved and refined from single crystal X‐ray data: P3¯m1, wR2 = 0.0470, 1469 F² values and 62 variable parameters. Both crystallographically different platinum sites have a slightly distorted trigonal prismatic indium coordination. These [PtIn₆] prisms are condensed via common edges and corners forming a complex three‐dimensional [Pt₁₂In₃₂] network. The gadolinium, In1 and In7 atoms fill cavities within this polyanion. Tb₃Pt₄In₁₂ is isotypic with the gadolinium compound.     

Heterotermetallic Indium Lithium Halostannates: Low‐Temperature Single‐Source Precursors for Tin‐Rich Indium Tin Oxides and Their Application for Thin‐Film Transistors

The syntheses and structural elucidation of dimeric [Sn(OCyHex)₂] ( 1 ), its corresponding (cyclohexoxy)alkalistannates(II) [{M(OCyHex)₃Sn}₂] (M=Li ( 2 ), Na ( 3 ), K ( 4 )), and of the first heteroleptic heterotermetallic Li/In/Sn–haloalkoxide clusters [X₂In{LiSn₂(OCyHex)₆}] (X=Br ( 5 ), Cl ( 6 )) with a double seco‐norcubane core are reported. They represent suitable precursors for new amorphous indium tin oxide (ITO) materials as transparent conducting oxides with drastically reduced concentrations of expensive indium, while maintaining their high electrical performance. In fact, compounds 5 and 6 were successfully degraded under dry synthetic air at relatively low temperature, resulting in new semiconducting tin‐rich ITOs homogeneously dispersed in a tin oxide/lithium oxide matrix. The obtained particles were investigated and characterised by different analytical techniques, such as powder XRD, IR spectroscopy, SEM, TEM and energy‐dispersive X‐ray spectroscopy (EDX). The analytical data confirm that the final materials consist of tin‐containing indium oxide embedded in an amorphous tin oxide matrix. The typical broadening and shift of the observed indium oxide reflections to higher 2θ values in the powder XRD pattern clearly indicated that tin centres were successfully incorporated into the In₂O₃ lattice and partially occupied In³⁺ sites. Investigations by EDX mapping proved that Sn was homogeneously distributed in the final materials. Thin‐film field‐effect transistors (FETs) were fabricated by spin‐coating of silicon wafers with solutions of 5 in toluene and subsequent calcination under dry air (25–700 °C). The FETs prepared with precursor 5 exhibited excellent performances, as shown by a charge‐carrier mobility of 6.36×10^?1 cm² V^?1 s (calcination at 250 °C) and an on/off current ratio of 10⁶.     

Flux growth and structure of two compounds with the EuIn2P2 structure type,AIn2P2 (A = Ca and Sr), and a new structure type,BaIn2P2

Single crystals of the new Zintl phases AIn₂P₂ [A = Ca (calcium indium phosphide), Sr (strontium indium phosphide) and Ba (barium indium phosphide)] have been synthesized from a reactive indium flux. CaIn₂P₂ and SrIn₂P₂ are isostructural with EuIn₂P₂ and crystallize in the space group P6₃/mmc. The alkaline earth cations A are located at a site with m symmetry; In and P are located at sites with 3m symmetry. The structure type consists of layers of A²⁺ cations separated by [In₂P₂]²⁻ anions that contain [In₂P₆] eclipsed ethane‐like units that are further connected by shared P atoms. This yields a double layer of six‐membered rings in which the In—In bonds are parallel to the c axis and to one another. BaIn₂P₂ crystallizes in a new structure type in the space group P2₁/m with Z = 4, with all atoms residing on sites of mirror symmetry. The structure contains layers of Ba²⁺ cations separated by [In₂P₂]²⁻ layers of staggered [In₂P₆] units that form a mixture of four‐, five‐ and six‐membered rings. As a consequence of this more complicated layered structure, both the steric and electronic requirements of the large Ba²⁺ cation are met.     

A three‐dimensional framework in 2,2′‐biimidazolium bis(2,2′‐biimidazole‐κ2N,N′)bis(biphenyl‐2,4′‐dicarboxylato‐κO)manganese(II) hexahydrate

In the title salt, (C₆H₈N₄)[Mn(C₁₄H₈O₄)₂(C₆H₆N₄)₂]·6H₂O, the Mn^II atom lies on an inversion centre and is coordinated by four N atoms from two 2,2′‐biimidazole (biim) ligands and two O atoms from two biphenyl‐2,4′‐dicarboxylate (bpdc) anions to give a slightly distorted octahedral coordination, while the cation lies about another inversion centre. Adjacent [Mn(bpdc)₂(biim)₂]²⁻ anions are linked via two pairs of N—H...O hydrogen bonds, leading to an infinite chain along the [100] direction. The protonated [H₂biim]²⁺ moiety acts as a charge‐compensating cation and space‐filling structural subunit. It bridges two [Mn(bpdc)₂(biim)₂]²⁻ anions through two pairs of N—H...O hydrogen bonds, constructing two R₂²(9) rings, leading to a zigzag chain in the [2] direction, which gives rise to a ruffled set of [H₂biim]²⁺[Mn(bpdc)₂(biim)₂]²⁻ moieties in the [01] plane. The water molecules give rise to a chain structure in which O—H...O hydrogen bonds generate a chain of alternating four‐ and six‐membered water–oxygen R₄²(8) and R₆⁶(12) rings, each lying about independent inversion centres giving rise to a chain along the [100] direction. Within the water chain, the (H₂O)₆ water rings are hydrogen bonded to two O atoms from two [Mn(bpdc)₂(biim)₂]²⁻ anions, giving rise to a three‐dimensional framework.     

Alkali‐Metal‐Mediated Magnesiations of an N‐Heterocyclic Carbene: Normal,Abnormal, and “Paranormal” Reactivity in a Single Tritopic Molecule

Herein the sodium alkylmagnesium amide [Na₄Mg₂(TMP)₆(nBu)₂] (TMP=2,2,6,6‐tetramethylpiperidide), a template base as its deprotonating action is dictated primarily by its 12 atom ring structure, is studied with the common N‐heterocyclic carbene (NHC) IPr [1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene]. Remarkably, magnesiation of IPr occurs at the para‐position of an aryl substituent, sodiation occurs at the abnormal C4 position, and a dative bond occurs between normal C2 and sodium, all within a 20 atom ring structure accommodating two IPr²⁻. Studies with different K/Mg and Na/Mg bimetallic bases led to two other magnesiated NHC structures containing two or three IPr⁻ monoanions bound to Mg through abnormal C4 sites. Synergistic in that magnesiation can only work through alkali‐metal mediation, these reactions add magnesium to the small cartel of metals capable of directly metalating a NHC.     

An indium(III)–water chain based on an unusual acyclic water pentamer

An in situ reaction under hydro­thermal conditions leads to the formation of the title compound, diaqua­(pyridine‐2‐carboxyl­ato)­(pyridine‐2,6‐dicarboxyl­ato)indium(II) trihydrate, [In(C₆H₄NO₂)(C₇H₃NO₄)(H₂O)₂]·3H₂O, in which the central In^III atom is seven‐coordinated by one pyridine‐2,6‐di­carboxyl­ate ligand, one pyridine‐2‐carboxyl­ate ligand and two water mol­ecules in a penta­gonal–bipyramidal coordination environment. An indium(III)–water chain based on an unusual water pentamer is observed.     

Mössbauer study of some Fe-containing M6 and M5 clusters

Isomer shift (δ) and quadrupole splitting (Δ) parameters have been assigned to the iron sites in [FeRh₅(CO)₁₆]⁻, trans- and cis-[Fe₂Rh₄(CO)₁₆]²⁻, [Fe₃-Rh₃(CO)₁₇]³⁻, [FeRh₄(CO)₁₅]²⁻, [Fe₃Pt₃(CO)₁₅]²⁻ and [Fe₄M(CO)₁₆]²⁻ (M = Pd or Pt) from ⁵⁷Fe Mössbauer spectra recorded at 78 K. The data for the closo compounds [FeRh₅(CO)₁₆]⁻ and [Fe₂Rh₄(CO)₁₆]²⁻ are compared with those for [Fe₆(CO)₁₆C]²⁻. In [Fe₃Rh₃(CO)₁₇]³⁻, the three major Fe sites were identified. For both [Fe₄M(CO)₁₆]²⁻ compounds two isomers were shown to be present in the solid state.     

Hexaaquacobalt(II) and hexaaquanickel(II) bis(μ‐pyridine‐2,6‐dicarboxylato)bis[(pyridine‐2,6‐dicarboxylato)bismuthate(III)] dihydrate

The title complexes, hexaaquacobalt(II) bis(μ‐pyridine‐2,6‐dicarboxylato)bis[(pyridine‐2,6‐dicarboxylato)bismuthate(III)] dihydrate, [Co(H₂O)₆][Bi₂(C₇H₄NO₄)₄]·2H₂O, (I), and hexaaquanickel(II) bis(μ‐pyridine‐2,6‐dicarboxylato)bis[(pyridine‐2,6‐dicarboxylato)bismuthate(III)] dihydrate, [Ni(H₂O)₆][Bi₂(C₇H₄NO₄)₄]·2H₂O, (II), are isomorphous and crystallize in the triclinic space group P. The transition metal ions are located on the inversion centre and adopt slightly distorted MO₆ (M = Co or Ni) octahedral geometries. Two [Bi(pydc)₂]⁻ units (pydc is pyridine‐2,6‐dicarboxylate) are linked via bridging carboxylate groups into centrosymmetric [Bi₂(pydc)₄]²⁻ dianions. The crystal packing reveals that the [M(H₂O)₆]²⁺ cations, [Bi₂(pydc)₄]²⁻ anions and solvent water molecules form multiple hydrogen bonds to generate a supramolecular three‐dimensional network. The formation of secondary Bi...O bonds between adjacent [Bi₂(pydc)₄]²⁻ dimers provides an additional supramolecular synthon that directs and facilitates the crystal packing of both (I) and (II).     

Synchronizing Substrate Activation Rates in Multicomponent Reactions with Metal–Organic Framework Catalysts

A study on the influence of the cation coordination number, number of Lewis acid centers, concurrent existence of Lewis base sites, and structure topology on the catalytic activity of six new indium MOFs, has been carried out for multicomponent reactions (MCRs). The new indium polymeric frameworks, namely [In₈(OH)₆(popha)₆(H₂O)₄]?3 H₂O ( InPF‐16 ), [In(popha)(2,2′‐bipy)]?3 H₂O ( InPF‐17 ), [In₃(OH)₃(popha)₂(4,4′‐bipy)]?4 H₂O ( InPF‐18 ), [In₂(popha)₂(4,4′‐bipy)₂]?3 H₂O ( InPF‐19 ), [In(OH)(Hpopha)]?0.5 (1,7‐phen) ( InPF‐20 ), and [In(popha)(1,10‐phen)]?4 H₂O ( InPF‐21 ) (InPF=indium polymeric framework, H₃popha=5‐(4‐carboxy‐2‐nitrophenoxy)isophthalic acid, phen=phenanthroline, bipy=bipyridine), have been hydrothermally obtained by using both conventional heating (CH) and microwave (MW) procedures. These indium frameworks show efficient Lewis acid behavior for the solvent‐free cyanosilylation of carbonyl compounds, the one pot Passerini 3‐component (P‐3CR) and the Ugi 4‐component (U‐4CR) reactions. In addition, InPF‐17 was found to be a highly reactive, recyclable, and environmentally benign catalyst, which allows the efficient synthesis of α‐aminoacyl amides. The relationship between the Lewis base/acid active site and the catalytic performance is explained by the 2D seven‐coordinated indium framework of the catalyst InPF‐17 . This study is an attempt to highlight the main structural and synthetic factors that have to be taken into account when planning a new, effective MOF‐based heterogeneous catalyst for multicomponent reactions.     

Tetrabutylammonium Salts of Aluminum(III) and Gallium(III) Phthalocyanine Radical Anions Bonded with Fluoren‐9‐olato− Anions and Indium(III) Phthalocyanine Bromide Radical Anions

Reduction of aluminum(III), gallium(III), and indium(III) phthalocyanine chlorides by sodium fluorenone ketyl in the presence of tetrabutylammonium cations yielded crystalline salts of the type (Bu₄N⁺)₂[M^III(HFl−O⁻)(Pc^.3−)]^.−(Br⁻) ⋅ 1.5 C₆H₄Cl₂ [M=Al ( 1 ), Ga ( 2 ); HFl−O⁻=fluoren‐9‐olato⁻ anion; Pc=phthalocyanine] and (Bu₄N⁺) [In^IIIBr(Pc^.3−)]^.− ⋅ 0.875 C₆H₄Cl₂ ⋅ 0.125 C₆H₁₄ ( 3 ). The salts were found to contain Pc^.3− radical anions with negatively charged phthalocyanine macrocycles, as evidenced by the presence of intense bands of Pc^.3− in the near‐IR region and a noticeable blueshift in both the Q and Soret bands of phthalocyanine. The metal(III) atoms coordinate HFl−O⁻ anions in 1 and 2 with short Al−O and Ga−O bond lengths of 1.749(2) and 1.836(6) Å, respectively. The C−O bonds [1.402(3) and 1.391(11) Å in 1 and 2 , respectively] in the HFl−O⁻ anions are longer than the same bond in the fluorenone ketyl (1.27–1.31 Å). Salts 1 – 3 show effective magnetic moments of 1.72, 1.66, and 1.79 μ_B at 300 K, respectively, owing to the presence of unpaired S= 1/2 spins on Pc^.3−. These spins are coupled antiferromagnetically with Weiss temperatures of −22, −14, and −30 K for 1 – 3 , respectively. Coupling can occur in the corrugated two‐dimensional phthalocyanine layers of 1 and 2 with an exchange interaction of J /k _B=−0.9 and −1.1 K, respectively, and in the π‐stacking {[In^IIIBr(Pc^.3−)]^.−}₂ dimers of 3 with an exchange interaction of J /k _B=−10.8 K. The salts show intense electron paramagnetic resonance (EPR) signals attributed to Pc^.3−. It was found that increasing the size of the central metal atom strongly broadened these EPR signals.     

Highly Dynamic Coordination Behavior of Pn Ligand Complexes towards “Naked” Cu+ Cations

Reactions of Cu⁺ containing the weakly coordinating anion [Al{OC(CF₃)₃}₄]^? with the polyphosphorus complexes [{CpMo(CO)₂}₂(μ,η²:η²‐P₂)] ( A ), [CpM(CO)₂(η³‐P₃)] (M=Cr( B1 ), Mo ( B2 )), and [Cp*Fe(η⁵‐P₅)] ( C ) are presented. The X‐ray structures of the products revealed mononuclear ( 4 ) and dinuclear ( 1 , 2 , 3 ) Cu^I complexes, as well as the one‐dimensional coordination polymer ( 5 a ) containing an unprecedented [Cu₂( C )₃]²⁺ paddle‐wheel building block. All products are readily soluble in CH₂Cl₂ and exhibit fast dynamic coordination behavior in solution indicated by variable temperature ³¹P{¹H} NMR spectroscopy.     

A three‐dimensional coordination polymer based on the Zn4(μ3‐OH)2 unit: poly[[(μ4‐benzene‐1,4‐dicarboxylato)bis(μ3‐benzene‐1,4‐dicarboxylato)bis(μ3‐hydroxido)bis(1,10‐phenanthroline‐5,6‐dione)tetrazinc] dihydrate]

The title compound, {[Zn₄(C₈H₄O₄)₃(OH)₂(C₁₂H₆N₂O₂)₂]·2H₂O}_n, has been prepared hydrothermally by the reaction of Zn(NO₃)₂·6H₂O with benzene‐1,4‐dicarboxylic acid (H₂bdc) and 1,10‐phenanthroline‐5,6‐dione (pdon) in H₂O. In the crystal structure, a tetranuclear Zn₄(OH)₂ fragment is located on a crystallographic inversion centre which relates two subunits, each containing a [ZnN₂O₄] octahedron and a [ZnO₄] tetrahedron bridged by a μ₃‐OH group. The pdon ligand chelates to zinc through its two N atoms to form part of the [ZnN₂O₄] octahedron. The two crystallographically independent bdc²⁻ ligands are fully deprotonated and adopt μ₃‐κO:κO′:κO′′ and μ₄‐κO:κO′:κO′′:κO′′′ coordination modes, bridging three or four Zn^II cations, respectively, from two Zn₄(OH)₂ units. The Zn₄(OH)₂ fragment connects six neighbouring tetranuclear units through four μ₃‐bdc²⁻ and two μ₄‐bdc²⁻ ligands, forming a three‐dimensional framework with uninodal 6‐connected α‐Po topology, in which the tetranuclear Zn₄(OH)₂ units are considered as 6‐connected nodes and the bdc²⁻ ligands act as linkers. The uncoordinated water molecules are located on opposite sides of the Zn₄(OH)₂ unit and are connected to it through hydrogen‐bonding interactions involving hydroxide and carboxylate groups. The structure is further stabilized by extensive π–π interactions between the pdon and μ₄‐bdc²⁻ ligands.     

New Ni–Pt Carbonyl Clusters with a Tetrahedron of Platinum Atoms Encapsulated in an Incomplete Tetrahedron of Nickel Atoms: [Ni36Pt4(CO)45]6− and [Ni37Pt4(CO)46]6−

A fully encapsulated Pt ₄ tetrahedron in an incomplete tetrahedron of 36 nickel atoms is present in [Ni₃₆Pt₄(CO)₄₅]⁶⁻ ( 1 ; see picture for the metal framework), which is obtained as an inseparable mixture with [Ni₃₇Pt₄(CO)₄₆]⁶⁻ ( 2 ) by reaction of [Ni₆(CO)₁₂]²⁻ with K₂[PtCl₄]. The trimethylbenzylammonium salts of 1 and 2 cocrystallize in a 1:1 ratio. The additional Ni atom of 2 caps the truncated vertex of 1 .     

A three‐dimensional framework of bis­[tris­(ethyl­enediamine)zinc] tetra­iodo­cadmate diiodide assisted by N—H⋯I hydrogen bonds

The title salt, [Zn(C₂N₂H₈)₃]₂[CdI₄]I₂, conventionally abbreviated [Zn(en)₃]₂[CdI₄]I₂, where en is ethyl­enediamine, contains discrete [Zn(en)₃]²⁺ cations and [CdI₄]²⁻ anions with distorted octa­hedral and nearly tetra­hedral geometries, respectively, as well as uncoordinated I⁻ ions. The cation and the free I⁻ anion lie on twofold rotation axes and the [CdI₄]²⁻ anion lies on a axis in the space group I2d. The structure exhibits numerous weak inter‐ionic hydrogen bonds of two types, viz. N—H⋯I⁻(free ion) and N—H⋯I([CdI₄]²⁻), which support the resulting three‐dimensional framework.     

A novel two‐dimensional cadmium(II) complex: poly[diaquatris(μ4‐cyclohexane‐1,4‐dicarboxylato)bis[2‐(pyridin‐4‐yl)‐1H‐benzimidazole]tricadmium(II)

The title compound, [Cd₃(C₈H₁₀O₄)₃(C₁₂H₉N₃)₂(H₂O)₂]_n or [Cd₃(chdc)₃(4‐PyBIm)₂(H₂O)₂]_n, was synthesized hydrothermally from the reaction of Cd(CH₃COO)₂·2H₂O with 2‐(pyridin‐4‐yl)‐1H‐benzimidazole (4‐PyBIm) and cyclohexane‐1,4‐dicarboxylic acid (1,4‐chdcH₂). The asymmetric unit consists of one and a half Cd^II cations, one 4‐PyBIm ligand, one and a half 1,4‐chdc²⁻ ligands and one coordinated water molecule. The central Cd^II cation, located on an inversion centre, is coordinated by six carboxylate O atoms from six 1,4‐chdc²⁻ ligands to complete an elongated octahedral coordination geometry. The two terminal rotationally symmetric Cd^II cations each exhibits a distorted pentagonal–bipyramidal geometry, coordinated by one N atom from 4‐PyBIm, five O atoms from three 1,4‐chdc²⁻ ligands and one O atom from an aqua ligand. The 1,4‐chdc²⁻ ligands possess two conformations, i.e.e,e‐trans‐chdc²⁻ and e,a‐cis‐chdc²⁻. The cis‐1,4‐chdc²⁻ ligands bridge the Cd^II cations to form a trinuclear {Cd₃}‐based chain along the b axis, while the trans‐1,4‐chdc²⁻ ligands further link adjacent one‐dimensional chains to construct an interesting two‐dimensional network.     

Beiträge zur Kristallchemie und zum thermischen Verhalten von wasserfreien Phosphaten. XXXIII [1] In2P2O7, ein Indium(I)‐diphosphato‐indat(III) und In4(P2O7)3 — Darstellung,Kristallisation und Kristallstrukturen

Contributions on Crystal Chemistry and Thermal Behaviour of Anhydrous Phosphates. XXXIII [1] In₂P₂O₇ an Indium(I)‐diphosphatoindate(III), and In₄(P₂O₇)₃ — Synthesis, Crystallization, and Crystal Structure Solid state reactions via the gas phase lead to the new mixed‐valence indium(I, III)‐diphosphate In₂P₂O₇. Colourless single crystals of In₂P₂O₇ have been grown by isothermal heating of stoichiometric amounts of InPO₄ and InP (800 °C; 7d) using iodine as mineralizer. The structure of In₂P₂O₇ [P2₁/c, a = 7.550(1) Å, b = 10.412(1) Å, c = 8.461(2) Å, b = 105.82(1)°, 2813 independent reflections, 101 parameter, R1 = 0.031, wR2 = 0.078] is the first example for an In⁺ cation in pure oxygen coordination. Observed distances d(In^I‐O) are exceptionally long (d_min(In^I‐O) = 2.82 Å) and support assumption of mainly s‐character for the lone‐pair at the In⁺ ion. Single crystals of In₄(P₂O₇)₃ were grown by chemical vapour transport experiments in a temperature gradient (1000 → 900 °C) using P/I mixtures as transport agent. In contrast to the isostructural diphosphates M₄(P₂O₇)₃ (M = V, Cr, Fe) monoclinic instead of orthorhombic symmetry has been found for In₄(P₂O₇)₃ [P2₁/a, a = 13.248(3) Å, b = 9.758(1) Å, c = 13.442(2) Å, b = 108.94(1)°, 7221 independent reflexes, 281 parameter, R1 = 0.027, wR2 = 0.067].     

A three‐dimensional ZnII coordination framework: poly[[μ2‐(E)‐1,2‐bis(pyridin‐4‐yl)ethene][μ4‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato][μ2‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato]dizinc(II)]

In the title coordination polymer, [Zn₂(C₁₄H₈N₂O₄)₂(C₁₂H₁₀N₂)]_n, the asymmetric unit contains one Zn^II cation, two halves of 2,2′‐(diazene‐1,2‐diyl)dibenzoate anions (denoted L²⁻) and half of a 1,2‐bis(pyridin‐4‐yl)ethene ligand (denoted bpe). The three ligands lie across crystallographic inversion centres. Each Zn^II centre is four‐coordinated by three O atoms of bridging carboxylate groups from three L²⁻ ligands and by one N atom from a bpe ligand, forming a tetrahedral coordination geometry. Two Zn^II atoms are bridged by two carboxylate groups of L²⁻ ligands, generating a [Zn₂(CO₂)₂] ring. Each loop serves as a fourfold node, which links its four equivalent nodes via the sharing of four L²⁻ ligands to form a two‐dimensional [Zn₂L₄]_n net. These nets are separated by bpe ligands acting as spacers, producing a three‐dimensional framework with a 4⁶6⁴ topology. Powder X‐ray diffraction and solid‐state photoluminescence were also measured.     

Mediated bioelectrocatalytic O2 reduction to water at highly positive electrode potentials near neutral pH

Combinations of bilirubin oxidase and metal complexes: [W(CN)₈]^3−/4−, [Os(CN)₆]^3−/4− and [Mo(CN)₈]^3−/4− (the formal potentials, E^0′(M), being 0.320, 0.448, and 0.584 V vs. Ag|AgCl, respectively, at pH 7.0), allowed bioelectrocatalytic reduction of O₂ to water at their formal potentials near neutral pH. The O₂ reduction current appeared even at the standard potential of the O₂/H₂O redox couple, E^0′(O₂/H₂O), when [Mo(CN)₈]^3−/4− was used at pH 7.4, though the magnitude was small. The magnitude of the bioelectrocatalytic current systematically decreased with the decrease in the potential difference between E^0′(O₂/H₂O) and E^0′(M). A limiting current as large as 17 mA/cm² of a projected electrode surface area was obtained at 0.25 V (−0.37 V vs. E^0′(O₂/H₂O)) for the O₂ reduction at pH 7.0 with a carbon felt electrode modified with electrostatically entrapped bilirubin oxidase and [W(CN)₈]^3−/4− at the electrode rotation rate of 4000 rpm.