High‐Performance Blue OLEDs Based on Phenanthroimidazole Emitters via Substitutions at the C6‐ and C9‐Positions for Improving Exciton Utilization

Donor–acceptor (D–A) molecular architecture has been shown to be an effective strategy for obtaining high‐performance electroluminescent materials. In this work, two D–A molecules, Ph‐BPA‐BPI and Py‐BPA‐BPI, have been synthesized by attaching highly fluorescent phenanthrene or pyrene groups to the C6‐ and C9‐positions of a locally excited‐state emitting phenylamine–phenanthroimidazole moiety. Equipped with good physical and hybridized local and charge‐transfer properties, both molecules show high performances as blue emitters in nondoped organic light‐emitting devices (OLEDs). An OLED using Ph‐BPA‐BPI as the emitting layer exhibits deep‐blue emission with CIE coordinates of (0.15, 0.08), and a maximum external quantum efficiency (EQE), current efficiency (CE), and power efficiency (PE) of 4.56 %, 3.60 cd A^?1, and 3.66 lm W^?1, respectively. On the other hand, a Py‐BPA‐BPI‐based, sky‐blue OLED delivers the best results among nondoped OLEDs with CIE_y values of < 0.3 reported so far, for which a very low turn‐on voltage of 2.15 V, CIE coordinates of (0.17, 0.29), and maximum CE, PE, and EQE values of 10.9 cd A^?1, 10.5 lm W^?1, and 5.64 %, were achieved, respectively. More importantly, both devices show little or even no efficiency roll‐off and high singlet exciton‐utilizing efficiencies of 36.2 % for Ph‐BPA‐BPI and 39.2 % for Py‐BPA‐BPI.     

A Novel trans‐1‐(9‐Anthryl)‐2‐phenylethene Derivative Containing a Phenanthroimidazole Unit for Application in Organic Light‐Emitting Diodes

Aryl‐substituted phenanthroimidazoles (PIs) have attracted tremendous attention in the field of organic light‐emitting diodes (OLEDs), because they are simple to synthesize and have excellent thermal properties, high photoluminescence quantum yields (PLQYs), and bipolar properties. Herein, a novel blue–green emitting material, (E)‐2‐{4′‐[2‐(anthracen‐9‐yl)vinyl]‐[1,1′‐biphenyl]‐4‐yl}‐1‐phenyl‐1H‐phenanthro[9,10‐d]imidazole (APE‐PPI), containing a t‐APE [1‐(9‐anthryl)‐2‐phenylethene] core and a PI moiety was designed and synthesized. Owing to the PI skeleton, APE‐PPI possesses high thermal stability and a high PLQY, and the compound exhibits bipolar transporting characteristics, which were identified by single‐carrier devices. Nondoped blue–green OLEDs with APE‐PPI as the emitting layer show emission at λ=508 nm, a full width at half maximum of 82 nm, a maximum brightness of 9042 cd m^?2, a maximum current efficiency of 2.14 cd A^?1, and Commission Internationale de L'Eclairage (CIE) coordinates of (0.26, 0.55). Furthermore, a white OLED (WOLED) was fabricated by employing APE‐PPI as the blue–green emitting layer and 4‐(dicyanomethylene)‐2‐tert‐butyl‐6‐(1,1,7,7‐tetramethyljulolidin‐4‐yl‐vinyl)‐4H‐pyran (DCJTB) doped in tris‐(8‐hydroxyquinolinato)aluminum (Alq₃) as the red–green emitting layer. This WOLED exhibited a maximum brightness of 10029 cd m^?2, a maximum current efficiency of 16.05 cd A^?1, CIE coordinates of (0.47, 0.47), and a color rendering index (CRI) of 85. The high performance of APE‐PPI‐based devices suggests that the t‐APE and PI combination can potentially be used to synthesize efficient electroluminescent materials for WOLEDs.     

Silicon‐Based Material with Spiro‐Annulated Fluorene/Triphenylamine as Host and Exciton‐Blocking Layer for Blue Electrophosphorescent Devices

A novel silicon‐based compound, 10‐phenyl‐2′‐(triphenylsilyl)‐10H‐spiro[acridine‐9,9′‐fluorene] (SSTF), with spiro structure has been designed, synthesized, and characterized. Its thermal, electronic absorption, and photoluminescence properties were studied. Its energy levels make it suitable as a host material or exciton‐blocking material in blue phosphorescent organic light‐emitting diodes (PhOLEDs). Accordingly, blue‐emitting devices with iridium(III) bis[(4,6‐difluorophenyl)‐pyridinato‐N,C²′]picolinate (FIrpic) as phosphorescent dopant have been fabricated and show high efficiency with low roll‐off. In particular, 44.0 cd A^?1 (41.3 lm W^?1) at 100 cd m^?2 and 41.9 cd A^?1 (32.9 lm W^?1) at 1000 cd m^?2 were achieved when SSTF was used as host material; 28.1 lm W^?1 at 100 cd m^?2 and 20.6 lm W^?1 at 1000 cd m^?2 were achieved when SSTF was used as exciton‐blocking layer. All of the results are superior to those of the reference devices and show the potential applicability and versatility of SSTF in blue PhOLEDs.     

Non‐Doped Sky‐Blue OLEDs Based on Simple Structured AIE Emitters with High Efficiencies at Low Driven Voltages

Blue organic light‐emitting diodes (OLEDs) are necessary for flat‐panel display technologies and lighting applications. To make more energy‐saving, low‐cost and long‐lasting OLEDs, efficient materials as well as simple structured devices are in high demand. However, a very limited number of blue OLEDs achieving high stability and color purity have been reported. Herein, three new sky‐blue emitters, 1,4,5‐triphenyl‐2‐(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (TPEI), 1‐(4‐methoxyphenyl)‐4,5‐diphenyl‐2‐(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (TPEMeOPhI) and 1‐phenyl‐2,4,5‐tris(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (3TPEI), with a combination of imidazole and tetraphenylethene groups, have been developed. High photoluminescence quantum yields are obtained for these materials. All derivatives have demonstrated aggregation‐induced emission (AIE) behavior, excellent thermal stability with high decomposition and glass transition temperatures. Non‐doped sky‐blue OLEDs with simple structure have been fabricated employing these materials as emitters and realized high efficiencies of 2.41 % (4.92 cd A⁻¹, 2.70 lm W⁻¹), 2.16 (4.33 cd A⁻¹, 2.59 lm W⁻¹) and 3.13 % (6.97 cd A⁻¹, 4.74 lm W⁻¹) for TPEI, TPEMeOPhI and 3TPEI, with small efficiency roll‐off. These are among excellent results for molecules constructed from the combination of imidazole and TPE reported so far. The high performance of a 3TPEI‐based device shows the promising potential of the combination of imidazole and AIEgen for synthesizing efficient electroluminescent materials for OLED devices.     

Adamantane‐Substituted Acridine Donor for Blue Dual Fluorescence and Efficient Organic Light‐Emitting Diodes

To date, blue dual fluorescence emission (DFE) has not been realized because of the limited choice of chemical moieties and severe geometric deformation of the DFE emitters leading to strong intramolecular charge transfer (ICT) with a large Stokes shift in excited states. Herein, an emitter (1′r,5′R,7′S)‐10‐(4‐(4,6‐diphenyl‐1,3,5‐triazin‐2‐yl)phenyl)‐10H‐spiro [acridine‐9,2′‐adamantane] (a‐DMAc‐TRZ) containing a novel adamantane‐substituted acridine donor is reported, which exhibits unusual blue DFE. The introduction of the rigid and bulky adamantane moiety not only suppressed the geometry relaxation in excited state, but also induced the formation of quasi‐axial conformer (QAC) and quasi‐equatorial conformer (QEC) geometries, leading to deep‐blue conventional fluorescence and sky‐blue thermally activated delayed fluorescence (TADF). The resulting organic light‐emitting diodes (OLEDs) achieved a maximum external quantum efficiency (EQE) of about 29 %, which is the highest reported for OLEDs based on dual‐conformation emitters.     

The Control of Conjugation Lengths and Steric Hindrance to Modulate Aggregation‐Induced Emission with High Electroluminescence Properties and Interesting Optical Properties

A series of novel AIE‐active (aggregation‐induced emission) molecules, named SAF‐2‐TriPE, SAF‐3‐TriPE, and SAF‐4‐TriPE, were designed and synthesized through facile reaction procedures. We found that incorporation of the spiro‐acridine‐fluorene (SAF) group, which is famous for its excellent hole‐transporting ability and rigid structure, at different substitution positions on the phenyl ring affected the conjugation lengths of these compounds. Consequently, we have obtained molecules with different emission colors and properties without sacrificing good EL (electroluminescence) characteristics. Accordingly, a device that was based on compound SAF‐2‐TriPE displayed superior EL characteristics: it emitted green light with η_{c, max}=10.5 cd A^?1 and η_{ext, max}=4.22 %, whereas a device that was based on compound SAF‐3‐TriPE emitted blue‐green light with η_{c, max}=3.9 cd A^?1 and η_{ext, max}= 1.71 %. These compounds also displayed different AIE performances: when the fraction of water in the THF solutions of these compounds was increased, we observed a significant improvement in the Φ_F of compounds SAF‐2‐TriPE and SAF‐3‐TriPE; in contrast, compound SAF‐4‐TriPE showed an abnormal phenomenon, in that it emitted a strong fluorescence in both pure THF solution and in the aggregated state without a significant change in Φ_F. Overall, this systematic study confirmed a relationship between the regioisomerism of the luminophore structure and its AIE activity and the resulting electroluminescent performance in non‐doped devices.     

Deep‐blue light‐emitting polyfluorenes containing spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers

Blue light‐emitting polyfluorenes, PPF‐FSOs and PPF‐SOFs were synthesized via introducing spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers (2,7‐diyl and 2′,7′‐diyl) (FSO/SOF) into the poly[9,9‐bis(4‐(2‐ethylhexyloxy) phenyl)fluorene‐2,7‐diyl] (PPF) backbone, respectively. With the increasing contents of FSO and SOF moieties, the absorption and PL spectra of PPF‐FSOs show slight red shift, while that of PPF‐SOFs exhibit blue shift, respectively. The HOMO and LUMO levels reduce gradually with increasing SOF unit in PPF‐SOFs. The polymers emit blue light peaked around 430–445 nm and show an excellent spectral stability with the variation in current densities. The distinctly narrowing EL spectra were observed with the incorporation of isomers in the polymers. The full width at half maximum reduced by 15 nm for PPF‐SOFs, resulting in a blue shift with the CIE coordinates from (0.16, 0.11) to (0.16, 0.08). With a device configuration of ITO/PEDOT:PSS/EML/CsF/Al, a maximum luminance efficiency (LE_max) of 2.00 cd A^?1, a maximum external quantum efficiency (EQE_max) of 3.76% with the CIE coordinates of (0.16, 0.08) for PPF‐SOF15 and a LE_max of 1.68 cd A^?1, a EQE_max of 2.38% with CIE (0.16, 0.12) for PPF‐FSO10 were obtained, respectively. The result reveals that spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers are promising blocks for deep‐blue light‐emitting polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2332–2341     

C−H Direct Arylated 6H‐Indolo[2,3‐b]quinoxaline Derivative as a Thickness‐Dependent Hole‐Injection Layer

A novel perfluoro‐1,4‐phenylenyl 6H ‐indolo[2,3‐b ]quinoxaline derivative ( TFBIQ ) was designed and synthesized by using a C−H direct arylation method. The optoelectrical properties of the obtained TFBIQ were fully characterized by UV/Vis spectroscopy, photoluminescence spectroscopy, cyclic voltammetry, and a group of Alq₃‐based green organic light‐emitting diodes (OLEDs). Device A, which used 0.5 nm‐thick TFBIQ as the interfacial modification layer, exhibited the five best advantages of device performance including a minimum turn‐on voltage as low as 3.1 V, a maximum luminescence intensity as high as 26564 cd m⁻², a highest current density value of 348.9 mA cm⁻² at a voltage of 11 V, the smallest efficiency roll‐off, as well as the greatest power efficiency of 1.46 lm W⁻¹ relative to all of the other tested devices with thicker TFBIQ and also 10 nm‐thick MoO₃ as hole‐injection layers (HILs). As a promising candidate for an organic HIL material, the as‐prepared TFBIQ exhibited a strong thickness effect on the performance of corresponding OLEDs. Furthermore, the theoretical calculated vertical ionization potential of the fluorinated TFBIQ suggests better anti‐oxidation stability than that of the non‐fluorinated structure.     

Molecular Design of Non‐doped OLEDs Based on a Twisted Heptagonal Acceptor: A Delicate Balance between Rigidity and Rotatability

The development of efficient non‐doped organic light‐emitting diodes (OLEDs) is highly desired but very challenging because of a severe aggregation‐caused quenching effect. Herein, we present a heptagonal diimide acceptor (BPI), which can restrict excessive intramolecular rotation and inhibit close intermolecular π–π stacking due to well‐balanced rigidity and rotatability of heptagonal structure. The BPI‐based luminogen ( DMAC‐BPI ) shows significant aggregation‐induced delayed florescence with an extremely high photoluminescence quantum yield (95.8 %) of the neat film, and the corresponding non‐doped OLEDs exhibit outstanding electroluminescence performance with maximum external quantum efficiency as high as 24.7 % and remarkably low efficiency roll‐off as low as 1.0 % at 1000 cd m^?2, which represents the state‐of‐the‐art performance for non‐doped OLEDs. In addition, the synthetic route to DMAC‐BPI is greatly streamlined and simplified through oxidative Ar?H/Ar?H homo‐coupling reaction.     

Versatile Benzimidazole/Triphenylamine Hybrids: Efficient Nondoped Deep‐Blue Electroluminescence and Good Host Materials for Phosphorescent Emitters

Two new bipolar compounds, N,N,N′,N′‐tetraphenyl‐5′‐(1‐phenyl‐1H‐benzimidazol‐2‐yl)‐1,1′:3′,1′′‐terphenyl‐4,4′′‐diamine ( 1 ) and N,N,N′,N′‐tetraphenyl‐5′‐(1‐phenyl‐1H‐benzimidazol‐2‐yl)‐1,1′:3′,1′′‐terphenyl‐3,3′′‐diamine ( 2 ), were synthesized and characterized, and their thermal, photophysical, and electrochemical properties were investigated. Compounds 1 and 2 possess good thermal stability with high glass‐transition temperatures of 109–129 °C and thermal decomposition temperatures of 501–531 °C. The fluorescence quantum yield of 1 (0.52) is higher than that of 2 (0.16), which could be attributed to greater π conjugation between the donor and acceptor moieties. A nondoped deep‐blue fluorescent organic light‐emitting diode (OLED) using 1 as the blue emitter displays high performance, with a maximum current efficiency of 2.2 cd A⁻¹ and a maximum external efficiency of 2.9 % at the CIE coordinates of (0.17, 0.07) that are very close to the National Television System Committee’s blue standard (0.15, 0.07). Electrophosphorescent devices using the two compounds as host materials for green and red phosphor emitters show high efficiencies. The best performance of a green phosphorescent device was achieved using 2 as the host, with a maximum current efficiency of 64.3 cd A⁻¹ and a maximum power efficiency of 68.3 lm W⁻¹; whereas the best performance of a red phosphorescent device was achieved using 1 as the host, with a maximum current efficiency of 11.5 cd A⁻¹, and a maximum power efficiency of 9.8 lm W⁻¹. The relationship between the molecular structures and optoelectronic properties are discussed.     

Highly Efficient Nondoped OLEDs with Negligible Efficiency Roll‐Off Fabricated from Aggregation‐Induced Delayed Fluorescence Luminogens

Purely organic emitters that can efficiently utilize triplet excitons are highly desired to cut the cost of organic light‐emitting diodes (OLEDs), but most of them require complicated doping techniques for their fabrication and suffer from severe efficiency roll‐off. Herein, we developed novel luminogens with weak emission and negligible delayed fluorescence in solution but strong emission with prominent delayed components upon aggregate formation, giving rise to aggregation‐induced delayed fluorescence (AIDF). The concentration‐caused emission quenching and exciton annihilation are well‐suppressed, which leads to high emission efficiencies and efficient exciton utilization in neat films. Their nondoped OLEDs provide excellent electroluminescence efficiencies of 59.1 cd A⁻¹, 65.7 lm W⁻¹, and 18.4 %, and a negligible current efficiency roll‐off of 1.2 % at 1000 cd m⁻². Exploring AIDF luminogens for the construction of nondoped OLEDs could be a promising strategy to advance device efficiency and stability.     

Four‐Coordinate Boron Emitters with Tridentate Chelating Ligand for Efficient and Stable Thermally Activated Delayed Fluorescence Organic Light‐Emitting Devices

A new class of four‐coordinate donor‐acceptor fluoroboron‐containing thermally activated delayed fluorescence (TADF) compounds bearing a tridentate 2,2′‐(pyridine‐2,6‐diyl)diphenolate (dppy) ligand has been successfully designed and synthesized. Upon varying the donor moieties from carbazole to 10H‐spiro[acridine‐9,9′‐fluorene] to 9,9‐dimethyl‐9,10‐dihydroacridine, these boron derivatives exhibit a wide range of emission colors spanning from blue to yellow with a large spectral shift of 2746 cm^?1, with high PLQYs of up to 96 % in the doped thin film. Notably, vacuum‐deposited organic light‐emitting devices (OLEDs) made with these boron compounds demonstrate high performances with the best current efficiencies of 55.7 cd A^?1, power efficiencies of 58.4 lm W^?1 and external quantum efficiencies of 18.0 %. More importantly, long operational stabilities of the green‐emitting OLEDs based on 2 with half‐lifetimes of up to 12 733 hours at an initial luminance of 100 cd m^?2 have been realized. This work represents for the first time the design and synthesis of tridentate dppy‐chelating four‐coordinate boron TADF compounds for long operational stabilities, suggesting great promises for the development of stable boron‐containing TADF emitters.     

Highly Efficient Orange and Warm White Phosphorescent OLEDs Based on a Host Material with a Carbazole–Fluorenyl Hybrid

A new carbazole–fluorenyl hybrid compound, 3,3′(2,7‐di(naphthaline‐2‐yl)‐9H‐fluorene‐9,9‐diyl)bis(9‐phenyl‐9H‐carbazole) (NFBC) was synthesized and characterized. The compound exhibits blue‐violet emission both in solution and in film, with peaks centered at 404 and 420 nm. In addition to the application as a blue emitter, NFBC is demonstrated to be a good host for phosphorescent dopants. By doping Ir(2‐phq)₃ in NFBC, a highly efficient orange organic light‐emitting diode (OLED) with a maximum efficiency of 32 cd A^?1 (26.5 Lm W^?1) was obtained. Unlike most phosphorescent OLEDs, the device prepared in our study shows little efficiency roll‐off at high brightness and maintains current efficiencies of 31.9 and 26.8 cd A^?1 at a luminance of 1000 and 10 000 cd m^?2, respectively. By using NFBC simultaneously as a blue fluorescence emitter and as a host for a phosphorescent dopant, a warm white OLED with a maximum efficiency of 22.9 Lm W^?1 (21.9 cd A^?1) was also obtained.     

1‐Acetyl‐3′‐(4‐bromophenyl)‐3′‐chlorospiro[3H‐indole‐3,2′‐oxetan]‐2(1H)‐one

In the title compound, C₁₈H₁₃BrClNO₃, the heterocyclic ring of the indole is distorted from planarity towards an envelope conformation. The orientations of the indole, oxetane, chloro and bromo­phenyl substituents are conditioned by the sp³ states of the spiro‐junction and the Cl‐attached C atoms.     

Isophorone－based Fluorescent Dopant for Red Organic Electrolumi－nescence Device

lsophorone-based red fluorescent compound 3-(dicyanomethy-lene ) -5, 5-dimethyi- 1- [ 2- ( N-ethyl-3-carbazyi ) ethylene ] cyciohe-xene (DCDCC) was synthesized for use in organic Hght-emit-ring diodes (OLEDs). DCDCC was characterized by narrow emission in photoluminescence with full.width at half-maximum of only 50 nm in solution and in thin solid film of 70 nm width. devices with configuration of ITO/NPB/Alq3:DCDCC/Alq3/Mg: Ag were fabricated utilizing DCDCC as dopant emitter. An efficient red emission peaked at 612 nm was obtained for the device with 1% (wt.%) DCDCC in Alq3. The maximum luminance and current efficiency were as high as 3700 cd/m^2 at 14 V and 1.25 cd/A at 150 mA/cm^2, respective-ly.     

Efficient Electroluminescence from Excimers of 1,3,6,8‐Tetrakis(3,5‐dimethylphenyl)pyrene

Excimers are generally considered as detrimental to OLEDs. For pyrene‐based chromophores, however, this is not always true. In this contribution, two new methylated tetraphenylpyrenes, 1,3,6,8‐tetra‐o‐tolylpyrene (TTPy) and 1,3,6,8‐tetrakis(3,5‐dimethylphenyl)pyrene (TDMPPy), were synthesized through Suzuki coupling reactions. TDMPPy absorbs and emits light at longer wavelengths than TTPy due to its more planar conformation and thus better conjugation. TDMPPy is prone to excimer formation, thus leading to a strong bathochromic shift (84 nm) in the photoluminescence spectrum of its film. TDMPPy exhibits efficient electroluminescence originating from pyrene excimers, affording a maximum luminance of 26 670 cd m^?2 and a current efficiency as high as 10.8 cd A^?1 in a non‐doped OLED (ITO/PEDOT:PSS (50 nm)/NPB (30 nm)/TDMPPy (30 nm)/TPBI (40 nm)/Ca:Ag).     

Alignment of Heptagonal Diimide and Triazine Enables Narrowband Pure-Blue Organic Light-Emitting Diodes with Low Efficiency Roll-Off

The endeavor to develop high-performance narrowband blue organic light-emitting diodes (OLEDs) with low efficiency roll-off represents an attractive challenge. Herein, we introduce a hetero-acceptor design strategy centered around the heptagonal diimide (BPI) building block to create an efficient thermally activated delayed fluorescence (TADF) sensitizer. The alignment of a twisted BPI unit and a planar diphenyltriazine (TRZ) fragment imparts remarkable exciton dynamic properties to 26tCz-TRZBPI, including a fast radiative decay rate (k_R) of 1.0×10⁷ s⁻¹ and a swift reverse intersystem crossing rate (k_RISC) of 1.8×10⁶ s⁻¹, complemented by a slow non-radiative decay rate (k_NR) of 6.0×10³ s⁻¹. Consequently, 26tCz-TRZBPI facilitates the fabrication of high-performance narrowband pure-blue TADF-sensitized fluorescence OLEDs (TSF-OLEDs) with a maximum external quantum efficiency (EQE_max) of 24.3 % and low efficiency roll-off even at a high brightness level of 10000 cd m⁻² (EQE₁₀₀₀₀: 16.8 %). This showcases a record-breaking external quantum efficiency at a high luminance level of 10000 cd m⁻² for narrowband blue TSF-OLEDs.     

Alcohol‐Soluble Electron‐Transport Materials for Fully Solution‐Processed Green PhOLEDs

Two alcohol‐soluble electron‐transport materials (ETMs), diphenyl(4‐(1‐phenyl‐1H‐benzo[d]imidazol‐2‐yl)phenyl)phosphine oxide (pPBIPO) and (3,5‐bis(1‐phenyl‐1H‐benzo[d]imidazol‐2‐yl)phenyl)diphenylphosphine oxide (mBPBIPO), have been synthesized. The physical properties of these ETMs were investigated and they both exhibited high electron‐transport mobilities (1.67×10^?4 and 2.15×10^?4 cm² V^?1 s^?1), high glass‐transition temperatures (81 and 110 °C), and low LUMO energy levels (?2.87 and ?2.82 eV, respectively). The solubility of PBIPO in n‐butyl alcohol was more than 20 mg mL^?1, which meets the requirement for fully solution‐processed organic light‐emitting diodes (OLEDs). Fully solution‐processed green‐phosphorescent OLEDs were fabricated by using alcohol‐soluble PBIPO as electron‐transport layers (ETLs), and they exhibited high current efficiencies, power efficiencies, and external quantum efficiencies of up to 38.43 cd A^?1, 26.64 lm W^?1, and 10.87 %, respectively. Compared with devices that did not contain PBIPO as an ETM, the performance of these devices was much improved, which indicated the excellent electron‐transport properties of PBIPO.     

Synthesis and electroluminescent performance of thermally activated delayed fluorescence‐conjugated polymers with simple formylphenyl as pendant acceptor

Formylphenyl has been demonstrated to act as an acceptor to construct thermally activated delayed fluorescence (TADF) emitter, and therefore a series of the TADF‐conjugated polymers with formylphenyl as pendant acceptor and carbazole/acridine as backbone donor are designed and synthesized. All polymers involve the twisted donor/acceptor structural moieties with the sufficiently spatial separation between the highest occupied molecular orbital and the lowest unoccupied molecular orbital as well as a small singlet/triplet splitting, and exhibit the legible TADF features confirmed by theoretical calculation and their transient decay spectra. The solution‐processed organic light‐emitting diodes using neat film of the polymers as emissive layer achieve excellent performance with the maximum external quantum efficiency (EQE) of up to 10.6%, the maximum current efficiency of up to 35.3 cd A⁻¹ and the low turn‐on voltage of 2.7 V. Moreover, the EQE still remains 10.3% at the luminance of 1000 cd m⁻² with the low driving voltage of 4.4 V and extremely small efficiency roll‐off. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1989–1996     

A Versatile Triphenylamine/Fluoranthene‐Based Derivative as a Nondoped Green‐Emitting,Hole‐Transporting Interlayer for Electroluminescent Devices

A new triphenylamine‐bridged fluoranthene derivative, 4‐(7,10‐diphenylfluoranthen‐8‐yl)‐N‐[4‐(7,10‐diphenylfluoranthen‐8‐yl)phenyl]‐N‐phenylaniline (BDPFPA), with a high glass transition temperature of 220 °C has been synthesized and characterized. BDPFPA is a highly fluorescent and versatile material that can be used as a nondoped green emitter and as a hole transporter. BDPFPA was used in a standard trilayer device as the emitting layer, which showed a low turn‐on voltage (<3 V) and a high efficiency of 11.6 cd A^?1. The device also shows little efficiency roll‐off at high brightness. For example, the efficiency can still be maintained at 11.4 cd A^?1 (5.4 lm W^?1) at a brightness of 10 000 cd m^?2. These results are among the best reported for nondoped fluorescent green organic light‐emitting diodes. A simple bilayer device, in which BDPFPA serves as a hole‐transporting layer, has a maximum power efficiency of 3.3 lm W^?1 and the performance is nearly 40 % higher than that of an N,N′‐bis(1‐naphthyl)‐N,N′‐ diphenyl‐1,1′‐biphenyl‐4,4′‐diamine (NPB)‐based standard device.