Palladium supported on diaminoglyoxime‐functionalized Fe3O4 nanoparticles as a magnetically separable nanocatalyst in Heck coupling reaction

A hybrid material of palladium supported on diaminoglyoxime‐functionalized Fe₃O₄ was used as an effective and recyclable catalyst in Mizoroki–Heck coupling reactions. The catalyst was very effective for the Mizoroki–Heck reaction of aryl halides with styrene and conversion was in most cases excellent. The yields of the products were in the range 75–98%. The catalyst showed good stability and could be recovered and reused for six reaction cycles without significant leaching and loss its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Gallic acid grafted to amine‐functionalized magnetic nanoparticles as a proficient catalyst for environmentally friendly synthesis of α‐aminonitriles

An effective approach of one‐pot catalytic Strecker reaction between aromatic aldehydes, aniline or toluidine and trimethylsilyl cyanide in the presence of amine‐functionalized Fe₃O₄@SiO₂ nanoparticles grafted with gallic acid (GA) as a powerful catalyst was developed. The fabricated reusable catalyst demonstrated high efficiency in the synthesis of α‐aminonitriles along with facile work‐up procedure. Fe₃O₄@SiO₂‐NH₂‐GA was characterized by Fourier transform‐infrared spectroscopy, scanning electron microscopy image, vibrating‐sample magnetometer curve, energy‐dispersive X‐ray analysis and thermogravimetric analysis.     

Pd–Schiff base complex supported on Fe3O4 magnetic nanoparticles: A new and highly efficient reusable catalyst for C–C bond formation in water

A protocol is introduced for the preparation of a new cage‐like Pd–Schiff base organometallic complex supported on Fe₃O₄ nanoparticles (Fe₃O₄@Schiff‐base‐Pd). The structure of the nanomagnetic catalyst was comprehensively characterized using Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), energy‐dispersive X‐ray spectroscopy, Brunauer–Emmett–Teller measurements, scanning electron microscopy (SEM), transmission electron microscopy, X‐ray mapping, thermogravimetric analysis, vibrating sample magnetometry and inductively coupled plasma atomic emission spectroscopy. In the second stage, the catalytic activity of this catalyst was studied in the Suzuki and Heck cross‐coupling reactions in water as a green solvent. In this sense, simple preparation of the catalyst from commercially available materials, high catalytic activity, simple operation, short reaction times, high yields and use of green solvent are some advantages of this protocol. Finally, the nanocatalyst was easily recovered, using an external magnet, and reused several times without significant loss of its catalytic efficiency. In addition, the stability of the catalyst after recycling was confirmed using SEM, XRD and FT‐IR techniques.     

Immobilized palladium on modified magnetic nanoparticles and study of its catalytic activity in suzuki–miyaura C–C coupling reaction

A new magnetically reusable nanosolid, Fe₃O₄@PPCA@Pd(0) (PPCA = piperidine‐4‐carboxylic acid), as a versatile and highly effective catalyst was fabricated and characterized using transmission and scanning electron microscopies, X‐ray diffraction, thermogravimetric analysis, Fourier transform infrared and energy‐dispersive spectroscopies and vibrating sample magnetometry. This nanosolid shows great catalytic activity for the synthesis of biphenyl compounds in short reaction times and with high yields. The magnetic character of this catalyst allows retrieval and multiple uses without appreciable loss of its catalytic activity. Our system not only solves the basic problems of catalyst separation and recovery, but also the reactions can be performed in green media. Copyright © 2016 John Wiley & Sons, Ltd.     

Palladium immobilized on amidoxime‐functionalized magnetic Fe3O4 nanoparticles: a highly stable and efficient magnetically recoverable nanocatalyst for sonogashira coupling reaction

We describe the synthesis of a novel Fe₃O₄/amidoxime (AO)/Pd nanocatalyst by grafting of AO groups on Fe₃O₄ nanoparticles and subsequent deposition of Pd nanoparticles. Prior to grafting of AO, the 2‐cyanoethyl‐functionalized Fe₃O₄ nanoparticles prepared through combining 2‐cyanoethyltriethoxysilane and Fe₃O₄ were treated with hydroxylamine. The AO‐grafted Fe₃O₄ nanoparticles were then used as a platform for the deposition of Pd nanoparticles. The catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning and transmission electron microscopies, vibrating sample magnetometry, wavelength‐ and energy‐dispersive X‐ray spectroscopies and inductively coupled plasma analysis. Fe₃O₄/AO/Pd is novel phosphine‐free recyclable heterogeneous catalyst for Sonogashira reactions. Interestingly, the novel catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled seven times without any significant loss in activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of MCM‐41‐Biurea‐Pd as a heterogeneous nanocatalyst and using its catalytic efficacy in C–C,C–N and C–O coupling reactions

MCM‐41‐Biurea‐Pd is introduced as a new, heterogeneous and reusable catalyst for C–C and C–heteroatom bond formation between various aryl halides, phenols and amines, in the presence of Ph₃SnCl (Stille reaction) in PEG‐400 as a green solvent at room temperature. The structure of the functionalized MCM‐41 was analysed using various techniques.     

Preparation of novel palladium nanoparticles supported on magnetic iron oxide and their catalytic application in the synthesis of 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols

Novel Pd nanoparticles were prepared in five successive stages: 1) preparation of the Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs), 2) coating of Fe₃O₄ MNPs with SiO₂ (Fe₃O₄@SiO₂), 3) functionalization of Fe₃O₄@SiO₂ with 3‐chloropropyltrimethoxy‐ silane (CPTMS) ligand (Fe₃O₄@SiO₂@CPTMS), 4) further functionalization with 3,5‐diamino‐1,2,4‐triazole (DAT) ligand (Fe₃O₄@SiO₂@CPTMS @DAT), and 5) the complexation of Fe₃O₄@SiO₂@CPTMS@DAT with PdCl₂ (Fe₃O₄@SiO₂@CPTMS@ DAT@Pd). Then, the obtained Pd nano‐catalyst characterized by different methods such as the elemental analysis (CHN), FT‐IR, XRD, EDX, SEM, TEM, TG‐DTA and VSM. Finally, the Pd catalyst was applied for the synthesis of various 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols.     

Synthesis and characterization of the novel diamine‐functionalized Fe3O4@SiO2 nanocatalyst and its application for one‐pot three‐component synthesis of chromenes

Fe₃O₄@SiO₂@propyltriethoxysilane@o‐phenylendiamine as an environmentally‐benign functionalized silica‐coated magnetic organometallic nanomaterial has been synthesized and characterized by Fourier transforms infrared (FT‐IR) spectroscopy, scanning electron microscopy (SEM) images and energy dispersive X‐ray (EDX) and vibrating sample magnetometer (VSM) analyses. Then, its catalytic activity was investigated for the one‐pot three‐component condensation reaction between dimedone, malononitrile and various substituted aromatic aldehydes to afford the corresponding 2‐amino‐4H‐chromene derivatives under mild reaction conditions. This nanocatalyst can be easily recovered from the reaction mixture by using a magnet and reused for at least five times without significant decrease in catalytic activity.     

Amine‐bridged bis(phenol) ligands for efficient Pd‐catalyzed aqueous C‐C coupling reactions

The influence of ring size ( 5 or 6 ), chain length ( 1 , 2 or 3 ) and bulkiness of N‐aryl substituents in amine‐bridged bis(phenol) ligands ( 1 , 2 , 3 ) on palladium‐catalyzed aqueous C‐C coupling reactions were revealed. The homocoupling of arylboronic acid can be completed in neat water with the aid of a catalytic amount of p‐toluenesulfonyl chloride (TsCl) in a very short time under anaerobic or aerobic conditions. Interestingly, the same catalytic system was efficient for Suzuki–Miyaura reaction in aqueous acetone under aerobic conditions in the absence of TsCl. The crystal structures of ligand 1 and three unsymmetrical fluorine‐substituted biaryl derivatives were also reported. Copyright © 2013 John Wiley & Sons, Ltd.     

Pd(0)‐ S‐propyl‐2‐aminobenzothioate immobilized onto functionalized magnetic nanoporous MCM‐41 as efficient and recyclable nanocatalyst for the Suzuki,Stille and Heck cross coupling reactions

The present work describes the use of Pd(0)‐ S‐propyl‐2‐aminobenzothioate Complex immobilized onto functionalized magnetic nanoporous MCM‐41(Fe₃O₄@MCM‐41@Pd‐SPATB) as efficient and recyclable nano‐organometallic catalyst for C–C bond formation between various aryl halides with phenylboronic acid (Suzuki reaction), aryl halides with triphenyltin chloride (Stille reaction), and aryl halides with n‐butyl acrylate (Heck reaction). All the reactions were carried out in PEG‐400 as green solvent with short reaction time and good to excellent yields. This catalyst was characterized by FT‐IR spectroscopy, XRD, TGA, VSM, ICP‐OES, TEM, EDX and SEM techniques. Ease of operation, high efficiency, recovery and reusability for five continuous cycles without significant loss of its catalytic activities or metal leaching are the noteworthy features of the currently employed heterogeneous catalytic system.     

Synthesis,characterization and catalytic performance of core‐shell structure magnetic Fe3O4/P(GMA‐EGDMA)‐NH2/HPG‐COOH‐Pd catalyst

A strategy has been developed for the synthesis, characterization and catalysis of magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd core‐shell structure supported catalyst. The P(GMA‐EGDMA) polymer layer was coated on the surface of hollow magnetic Fe₃O₄ microspheres through the effect of KH570. The core‐shell magnetic Fe₃O₄/P(GMA‐EGDMA) modified by ‐NH₂ could be grafted with HPG. Then, the hyperbranched glycidyl (HPG) with terminal ‐OH were modified by ‐COOH and adsorbed Pd nanoparticles. The hyperbranched polymer layer not only protected the Fe₃O₄ magnetic core from acid–base substrate corrosion, but also provided a number of functional groups as binding sites for Pd nanoparticles. The prepared catalyst was characterized by UV–vis, TEM, SEM, FTIR, TGA, ICP‐OES, BET, XRD, DLS and VSM. The catalytic tests showed that the magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd catalyst had excellent catalytic performance and retained 86% catalytic efficiency after 8 consecutive cycles.     

l‐Proline‐functionalized Fe3O4 nanoparticles as a novel magnetic chiral catalyst for the direct asymmetric Mannich reaction

l ‐Proline has been successfully anchored on the surface of magnetic nanoparticles and characterized using powder X‐ray diffraction, scanning electron microscopy, vibrating sample magnetometry and Fourier transform infrared spectroscopy. These nanoparticles as a chiral catalyst have been employed to promote the direct asymmetric Mannich reaction. The corresponding products are obtained in high yields with high level of diastereoselectivity (up to 99:1 dr) in the presence of Fe₃O₄– l ‐proline. Also this heterogeneous catalyst can be recovered easily and reused many times without significant loss of its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Pd(II) salen complex covalently anchored to multi‐walled carbon nanotubes as a heterogeneous and reusable precatalyst for Mizoroki–Heck and Hiyama cross‐coupling reactions

A Pd(II) salen complex anchored to multi‐walled carbon nanotubes showed excellent catalytic activity and stability for the Mizoroki–Heck and Hiyama cross‐couplings of aryl halides with olefins and phenylsiloxanes. Furthermore, the heterogeneous catalyst could be reused up to four times with the catalytic activity being recovered easily after simple manipulations. Copyright © 2014 John Wiley & Sons, Ltd.     

Palladium supported on silica–chitosan hybrid material (Pd‐CS@SiO2) for Suzuki–Miyaura and Mizoroki–Heck cross‐coupling reactions

Palladium supported on silica–chitosan hybrid material was prepared and characterized using thermogravimetric and differential thermogravimetric analyses, scanning electron microscopy, and Fourier transform infrared, energy‐dispersive X‐ray and X‐ray photoelectron spectroscopies. The prepared Pd‐CS@SiO₂ catalyst (1 mol%) was used for the Suzuki–Miyaura cross‐coupling reaction of various aryl halides and arylboronic acids in 95% ethanol at 80 °C and the Mizoroki–Heck reaction in dimethylformamide at 110 °C using K₂CO₃ as a base. The developed catalyst is well suitable for the 3R approach (recoverable, robust, recyclable) for cross‐coupling reactions without appreciable loss of its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Heteroleptic (N‐heterocyclic carbene)–Pd–pyrazole (indazole) complexes: Synthesis,characterization and catalytic activities towards C–C and C–N cross‐coupling reactions

Eight heteroleptic palladium complexes containing both N‐heterocyclic carbenes and NH‐heterocycle azoles (pyrazole and indazole) were synthesized and characterized, and their structures were unambiguously confirmed using single‐crystal X‐ray diffraction. Further investigation of the complexes as catalysts in the Suzuki–Miyaura reaction and Buchwald–Hartwig amination revealed good reactivities for aryl chlorides.     

Catalytic application of sulfonic acid‐functionalized titana‐coated magnetic nanoparticles for the preparation of 1,8‐dioxodecahydroacridines and 2,4,6‐triarylpyridines via anomeric‐based oxidation

We have developed green, efficient and powerful protocols for the preparation of 2,4,6‐triarylpyridines and 1,8‐dioxodecahydroacridines in the presence of Fe₃O₄@TiO₂@O₂PO₂(CH₂)₂NHSO₃H as a sulfonic acid‐functionalized titana‐coated magnetic nanoparticle catalyst under mild and solvent‐free reaction conditions. These protocols furnished the desired products in short reaction times with good to high yields (20–40 min and 80–86% in the case of 2,4,6‐triarylpyridines; 15–90 min and 80–93% in the case of 1,8‐dioxodecahydroacridines). The final step of the mechanistic route in the synthesis of 2,4,6‐triarylpyridines proceeds via an anomeric‐based oxidation. Also, the nanomagnetic core–shell catalyst can be recycled and reused in both cases of the scrutinized one‐pot multicomponent reactions with high turnover number and turnover frequency.     

Improvement on physical properties of polyethersulfone membranes modified by poly(1‐vinylpyrrolidone) grafted magnetic Fe3O4@SiO2 nanoparticles

Polyethersulfone (PES) and poly(1‐vinylpyrrolidone) (PVP) were used to prepare ultrafiltration membranes with grafted Fe₃O₄ magnetic nanoparticles (PVP‐g‐Fe₃O₄@SiO₂). The structure of synthesized PVP‐g‐Fe₃O₄@SiO₂ was confirmed by FT‐IR and SEM analysis. Physical properties of blend membranes such as thermal resistance, Tensile strength, water uptake, and hydrophilicity were also investigated. Blended membranes of PES/PVP‐g‐Fe₃O₄@SiO₂ have exhibited higher thermal resistance due to increasing the modified nanoparticle content. The hydrophilicity of the synthesized PES/PVP‐g‐Fe₃O₄@SiO₂ membranes also improved by increasing the PVP‐g‐Fe₃O₄@SiO₂ content. As expected, increasing the hydrophilicity of blended membrane, caused enhancement of fouling resistance in membranes. Results showed that the content of PVP‐g‐Fe₃O₄@SiO₂ has different effects on the properties of synthesized composite membranes. Despite increasing the content of PVP‐g‐Fe₃O₄@SiO₂ has a negative effect on elongation, positive effects on maximum stress was observed. Moreover, the water uptake of synthesized membranes was significantly enhanced in comparison to other similar studies.     

Polymer supported copper(II) amine‐imine complexes in the C‐N and A3 coupling reactions

New polymer supported Cu(II) complexes based on an epoxy functionalized gel type resin were prepared using the multi‐stage procedures. The reactions of epoxy groups with ethylenediamine or tris(2‐aminoethyl)amine, and then NH₂ groups with salicylaldehydes were used for the preparation of a series of amine‐imine functionalized polymer supports. Copper(II) acetate was used as a source of metal ions. The complexes were characterized using ICP‐OES, FTIR, DR UV–Vis and TGA techniques, and tested as catalysts in two model C‐N and a series of A³ coupling reactions. Their catalytic activity was rather low in the C‐N coupling reactions between imidazole and iodobenzene or phenylboronic acid. However, the second of the reactions could be conducted effectively under milder conditions. The complexes were efficient used as recyclable catalysts in the A³ coupling reactions. A series of aromatic aldehydes and secondary amines and phenylacetylene could be coupled using 1% mol catalyst.     

Efficient Sonogashira and A3 coupling reactions catalyzed by biosynthesized magnetic Fe3O4@Ni nanoparticles from Euphorbia maculata extract

In this work, biosynthesized Fe₃O₄@Ni nanoparticles using Euphorbia maculata aqueous have been used as effective catalysts in the synthesis of 2,3-disubstituted benzo[b]furan derivatives using three component coupling of aldehydes, secondary amines and alkynes (A³ coupling reaction). Using novel nanoscale materials, the current green, practical and economical method leads to short reaction times and high yields. The biosynthesized catalyst was also successfully employed in the Sonogashira cross-coupling reactions of various aryl halides with phenylacetylene. The best performance was observed using just 20 mg of the catalyst and ethanol as a green solvent. The developed protocol provides easy workup, short reaction times and good to excellent product yields. Furthermore, since the composite is highly stable, an external permanent magnet can be easily used for separating the catalyst. Thus, the catalyst can be recycled several times without considerable loss of catalytic activity.     

Preparation of Phosphinated Polymer‐Incarcerated Palladium and Its Application to C?N and C?C Bond‐Forming Reactions

Phosphinated polymer‐incarcerated (PI) Pd catalysts were prepared by immobilization of palladium with phosphinated polymers by using the PI method. The phosphinated PI Pd catalysts showed good catalytic activity without externally added phosphine ligands in the amination of aryl halides for C N bond‐forming reactions, as well as in Suzuki–Miyaura and Sonogashira coupling. No leaching of palladium from the immobilized Pd was observed by fluorescence X‐ray analysis. Furthermore, it was found that immobilization of Pd by the PI process facilitated the suppression of poisoning of the metal by amines. These effects can be ascribed to stabilization of the catalyst by both the phosphine moieties and the benzene rings in the swollen polymer support. The phosphinated PI Pd catalysts could also be recovered by simple filtration and reused several times without leaching of palladium in both the amination and Suzuki–Miyaura coupling reactions.