Active and recyclable ordered mesoporous magnetic organometallic catalyst as high‐performance visible light photocatalyst for degradation of organic pollutants

A novel light‐active magnetic Pd complex as a photocatalyst was prepared through bonding organometallics to mesoporous silica channels formed on the surface of silica‐coated iron oxide nanoparticles. The nanocomposite (denoted as Fe₃O₄@SiO₂@m‐SiO₂@PDA‐Pd(0); PDA = 1,10‐phenanthroline‐2,9‐dicarbaldehyde) is more efficient and has higher photocatalytic capability in the degradation of 2,4‐dichlorophenol under visible light irradiation compared with virgin Pd complex (PDA‐Pd). This noteworthy photodegradation activity can be due to the high dispersion of Pd nanoparticles. High yield, low reaction time and non‐toxicity of the catalyst are the main merits of this protocol. Also magnetic separation is an environmentally friendly alternative method for the separation and recovery of the catalyst, since it minimizes the use of solvents and auxiliary materials, reduces operation time and minimizes catalyst loss by preventing mass loss and oxidation. The produced Pd catalyst was characterised using various techniques. Furthermore, transmission electron microscopy characterization was used for determining the structural properties of the Pd nanocatalyst.     

Green synthesis of reduced graphene oxide/Fe3O4/Ag ternary nanohybrid and its application as magnetically recoverable catalyst in the reduction of 4‐nitrophenol

Materials having both magnetic and catalytic properties have shown great potential for practical applications. Here, a reduced graphene oxide/iron oxide/silver nanohybrid (rGO/Fe₃O₄/Ag NH) ternary material was prepared by green synthesis of Ag on pre‐synthesized rGO/Fe₃O₄. The as‐prepared rGO/Fe₃O₄/Ag NH was characterized using Fourier transform infrared spectroscopy, X‐ray diffractometry, Raman spectroscopy, vibrating sample magnetometry, transmission electron microscopy and energy‐dispersive X‐ray spectroscopy. rGO sheets were covered with Fe₃O₄ (8–16 nm) and Ag (18–40 nm) nanoparticles at high densities. The mass percentages were 13.47% (rGO), 62.52% (Fe₃O₄) and 24.01% (Ag). rGO/Fe₃O₄/Ag NH exhibited superparamagnetic behavior with high saturated magnetization (29 emu g⁻¹ at 12 kOe), and efficiently catalyzed the reduction of 4‐nitrophenol (4‐NP) with a rate constant of 0.37 min⁻¹, comparable to those of Ag‐based nanocatalysts. The half‐life of 4‐NP in the presence of rGO/Fe₃O₄/Ag NH was ca 1.86 min. rGO/Fe₃O₄/Ag NH could be magnetically collected and reused, and retained a high conversion efficiency of 94.4% after the fourth cycle. rGO/Fe₃O₄/Ag NH could potentially be used as a magnetically recoverable catalyst in the reduction of 4‐NP and environmental remediation.     

Preparation of novel palladium nanoparticles supported on magnetic iron oxide and their catalytic application in the synthesis of 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols

Novel Pd nanoparticles were prepared in five successive stages: 1) preparation of the Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs), 2) coating of Fe₃O₄ MNPs with SiO₂ (Fe₃O₄@SiO₂), 3) functionalization of Fe₃O₄@SiO₂ with 3‐chloropropyltrimethoxy‐ silane (CPTMS) ligand (Fe₃O₄@SiO₂@CPTMS), 4) further functionalization with 3,5‐diamino‐1,2,4‐triazole (DAT) ligand (Fe₃O₄@SiO₂@CPTMS @DAT), and 5) the complexation of Fe₃O₄@SiO₂@CPTMS@DAT with PdCl₂ (Fe₃O₄@SiO₂@CPTMS@ DAT@Pd). Then, the obtained Pd nano‐catalyst characterized by different methods such as the elemental analysis (CHN), FT‐IR, XRD, EDX, SEM, TEM, TG‐DTA and VSM. Finally, the Pd catalyst was applied for the synthesis of various 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols.     

A practical and highly efficient synthesis of densely functionalized nicotinonitrile derivatives catalyzed by zinc oxide‐decorated superparamagnetic silica attached to graphene oxide nanocomposite

Zinc oxide‐decorated superparamagnetic silica attached to graphene oxide (Fe₃O₄/SiO₂/PTS‐GO‐ZnO), as a novel nanocomposite, was designed, and its core‐shell structure was appropriately characterized by different spectroscopy or microscopy methods and thermal techniques as well as measuring of its porosity and magnetic properties. The catalytic activity of Fe₃O₄/SiO₂/PTS‐GO‐ZnO, as a reusable heterogeneous catalyst, was investigated for efficient one‐pot multi‐component synthesis of medicinally important functionalized 2‐amino‐6‐(2‐oxo‐2H‐chromen‐3‐yl)‐4‐arylnicotinonitrile derivatives. The significant features of the present procedure are mild reaction conditions, low loading of the catalyst, high to quantitative yields of the desired products, avoiding the use of toxic heavy metals or solvents, simple isolation and purification of the products, and stability as well as reusability of the catalyst after at least six consecutive runs.     

Synthesis of Fe3O4\SiO2\Ag nanoparticles and its application in surface-enhanced Raman scattering

To obtain a recyclable surface-enhanced Raman scattering (SERS) material, we developed a composite of Fe₃O₄\SiO₂\Ag with core\shell\particles structure. The designed particles were synthesized via an ultrasonic route. The Raman scattering signal of Fe₃O₄ could be shielded by increasing the thickness of the SiO₂ layer to 60 nm. Dye rhodamine B (RB) was chosen as probe molecule to test the SERS effect of the synthesized Fe₃O₄\SiO₂\Ag particles. On the synthesized Fe₃O₄\SiO₂\Ag particles, the characteristic Raman bands of RB could be observed when the RB solution was diluted to 5 ppm (1×10⁻⁵ M). Furthermore, the synthesized particles could keep their efficiency till four cycles.     

3-Amino-5-mercapto-1,2,4-triazole-functionalized Fe3O4 magnetic nanocomposite as a green and efficient catalyst for synthesis of bis(indolyl)methane derivatives

A core–shell Fe₃O₄@silica magnetic nanocomposite functionalized with 3-amino-5-mercapto-1,2,4-triazole (Fe₃O₄/SiO₂/PTS/AMTA) was prepared using Fe₃O₄ with silica layer, and its surface was modified with 3-amino-5-mercapto-1,2,4-triazole. The novel synthesized magnetite nanocomposite was characterized using various techniques. The catalytic activity of Fe₃O₄/SiO₂/PTS/AMTA was demonstrated in the synthesis of bis(indolyl)methane derivatives under solvent-free conditions. Some of the bis(indolyl)methane derivatives were synthesized through one-pot, three-component reaction of 1 mol of various benzaldehydes or ketones with 2 mol of indole in the presence of Fe₃O₄/SiO₂/PTS/AMTA in good to excellent isolated yields. In addition, the catalyst could be recovered and used for several reaction runs without loss of catalytic activity. The stability of recycled catalyst was investigated. This method has some advantages including experimental simplicity, good to excellent yields, solvent-free conditions and stability and reusability of the catalyst.     

Iron oxide nanoparticles coated with green tea extract as a novel magnetite reductant and stabilizer sorbent for silver ions: Synthetic application of Fe3O4@green tea/Ag nanoparticles as magnetically separable and reusable nanocatalyst for reduction of 4‐nitrophenol

Green tea extract having many phenolic hydroxyl and carbonyl functional groups in its molecular framework can be used in the modification of Fe₃O₄ nanoparticles. Moreover, the feasibility of complexation of polyphenols with silver ions in aqueous solution can improve the surface properties and capacity of the Fe₃O₄@green tea extract nanoparticles (Fe₃O₄@GTE NPs) for sorption and reduction of silver ions. Therefore, the novel Fe₃O₄@GTE NPs nano‐sorbent has potential ability as both reducing and stabilizing agent for immobilization of silver nanoparticles to make a novel magnetic silver nanocatalyst (Fe₃O₄@GTE/Ag NPs). Inductively coupled plasma analysis, transmission and scanning electron microscopies, energy‐dispersive X‐ray and Fourier transform infrared spectroscopies, and vibrating sample magnetometry were used to characterize the catalyst. Fe₃O₄@GTE/Ag NPs shows high catalytic activity as a recyclable nanocatalyst for the reduction of 4‐nitrophenol at room temperature.     

A highly reactive and magnetic recyclable catalyst based on silver nanoparticles supported on ferrite for N‐monoalkylation of amines with alcohols

Fe₃O₄@SiO₂‐Ag catalyst was found to be highly active and selective in the N ‐alkylation of amines with a variety of aromatic and linear alcohols. The heterogeneous nature of the Fe₃O₄@SiO₂‐Ag catalyst allows easy recovery and regeneration by applying an external magnet for six subsequent reaction cycles. The prepared catalyst was characterized using electron microscopy techniques, X‐ray diffraction, vibrating sample magnetometry and atomic absorption spectroscopy.     

Ni@Pd core–shell nanoparticles immobilized on yolk–shell Fe3O4@polyaniline composites as a highly efficient,magnetically separable and atom‐economical catalyst for reduction of nitrobenzenes

The preparation of Ni@Pd core–shell nanoparticles immobilized on yolk–shell Fe₃O₄@polyaniline composites is reported. Fe₃O₄ nanoclusters were first synthesized through the solvothermal method and then the SiO₂ shell was coated on the Fe₃O₄ surface via a sol–gel process. To prepare Fe₃O₄@SiO₂@polyaniline composites, polyvinylpyrrolidone was first grafted on to the surface of Fe₃O₄@SiO₂ composites and subsequently polymerization of aniline was carried out via an ultrasound‐assisted in situ surface polymerization method. Selective etching of the middle SiO₂ layer was then accomplished to obtain the yolk–shell Fe₃O₄@polyaniline composites. The approach uses polyaniline (PANI) conductive polymer as a template for the synthesis of Ni@Pd core–shell nanoparticles. The catalytic activity of the synthesized yolk–shell Fe₃O₄@PANI/Ni@Pd composite was investigated in the reduction of o‐nitroaniline to benzenediamine by NaBH₄, which exhibited conversion of 99% in 3 min with a very low content of the catalyst. Transmission electron microscopy, X‐ray photoelectron spectroscopy, TGA, X‐ray diffraction, UV–visible, scanning electron microscopy, X‐ray energy dispersion spectroscopy and FT‐IR were employed to characterize the synthesized nanocatalyst. Copyright © 2014 John Wiley & Sons, Ltd.     

Fe3O4 – Glutathione stabilized Ag nanoparticles: A new magnetically separable robust and facile catalyst for aqueous phase reduction of nitroarenes

The heterostructured Ag nanoparticles decorated Fe₃O₄ Glutathione (Fe₃O₄‐Glu‐Ag) nanoparticles (NPs) were synthesized by sonicating glutathione (Glu) with magnetite and further surface immobilization of silver NPs on it. The ensuing magnetic nano catalyst is well characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), powder X‐ray diffraction (PXRD), thermogravimetric analysis (TGA). The prepared Fe₃O₄‐Glu‐Ag nanoparticles have proved to be an efficient and recyclable nanocatalyst with low catalyst loading for the reduction of nitroarenes and heteronitroarenes to respective amines in the presence of NaBH₄ using water as a green solvent which could be easily separated at the end of a reaction using an external magnet and can be recycled up to 5 runs without any significant loss in catalytic activity. Gram scale study for the reduction of 4‐NP has also being carried out successfully and it has been observed that this method can serve as an efficient protocol for reduction of nitroarenes on industrial level.     

Fe3O4@SiO2@Im‐bisethylFc [HC2O4] as a novel recyclable heterogeneous nanocatalyst for synthesis of bis‐coumarin derivatives

Nanomagnetic bisethylferrocene‐containing ionic liquid supported on silica‐coated iron oxide (Fe₃O₄@SiO₂@Im‐bisethylFc [HC₂O₄]) as a novel catalyst was designed and synthesized. The described catalyst was recycled and used without change in the time and efficiency of the condensation reaction. The Fourier transform‐infrared spectroscopy (FT‐IR), scanning electron microscopy images, X‐ray diffraction patterns, energy‐dispersive X‐ray spectroscopy, transmission electron microscope and vibrating‐sample magnetometer results confirmed the formation of Fe₃O₄@SiO₂@Im‐bisethylFc [HC₂O₄] magnetic nanoparticle. The novel bis‐coumarin derivatives were identified by ¹H‐NMR, ¹³C‐NMR, FT‐IR and CHNS analysis.     

Immobilized palladium on surface-modified Fe3O4/SiO2 nanoparticles: as a magnetically separable and stable recyclable high-performance catalyst for Suzuki and Heck cross-coupling reactions

A palladium-based catalyst (Fe₃O₄/SiO₂/HPG–OPPh₂–PNP) supported on chlorodiphenylphosphine-functionalized magnetic nanoparticles was successfully prepared from Fe₃O₄/SiO₂ with sequential attachment of glycerol and chlorodiphenylphosphine, followed by treatment of an ethanolic solution of palladium chloride with hydrazine. The as-prepared catalyst was characterized by ICP-AES, FTIR, XRD, SEM, and TEM. The Fe₃O₄/SiO₂/HPG–OPPh₂–PNP was found as a magnetically separable and highly active catalyst for Suzuki coupling reactions of aryl iodides, bromides, and chlorides as well as Heck reactions of aryl iodides and bromides. Under appropriate conditions, all reactions afforded the desired products in moderate to excellent yields. Moreover, this catalyst can be easily recovered by using a magnetic field and directly reused for at least six cycles without significant loss of its activity.     

Efficient catalytic degradation of single and binary azo dyes by a novel triple nanocomposite of Mn3O4/Ag/SiO2

The strategy of structurally integrating noble metal and metal oxides is expected to offer exceptional opportunities toward emerging functions of all. We report the creation of an efficient hetero-structured nanocatalyst consisting of Mn₃O₄ core, SiO₂ shell impregnated with noble Ag nanoparticles. The triple nanocatalyst Mn₃O₄/Ag/SiO₂ was synthesized by using a facile three-step approach to disperse Ag nanoparticles between the surfaces of functionalized Mn₃O₄ and SiO₂. The physicochemical structural characterization was performed by XRD and FTIR. The surface morphologies were observed by SEM and TEM. The EDX measurements confirmed the composition of the composite. The nanocomposite has been used as a catalyst for the degradation of Direct blue 78 in the presence of sodium borohydride (NaBH₄). It has a drastic catalytic effect as compared to Mn₃O₄/Ag and Mn₃O₄. The rate constant of Direct blue 78 reduction followed the order: Mn₃O₄/Ag/SiO₂ (0.25166 min⁻¹) > Mn₃O₄/Ag (0.07971 min⁻¹) > Mn₃O₄ (0.00947 min⁻¹). The effects of different reaction conditions of the catalytic reaction have been determined. The catalytic activity of the as- synthesized nanocomposite was examined for the binary dyes system by incorporation of an additional dye (Sunset yellow). Its influence on the degradation rate and efficiency of Direct blue 78 was investigated. The nanocatalyst exhibited excellent catalytic activity towards the complete degradation of both the Direct blue 78 and Sunset yellow. The degradation percentage for these dyes reached 99.33 and 94.68%, respectively. The recovery and reusability of the Mn₃O₄/Ag/SiO₂ nanocomposite was studied in the reduction reaction of Direct blue 78. Five consecutive recovery reaction cycles were performed. They revealed high stability and constant efficiency of the catalyst for four cycles.     

Green synthesis and characterization of Ag and Ag/Fe3O4 nanocomposites for antimicrobial effect and rhodamine- B dye degradation

We used a simple two-stage tactic to design and synthesize a magnetically separable catalyst (MSC) Ag/Fe₃O₄ by combining independently synthesized Fe₃O₄ and Jatropha curcas root functionalized Ag nanoparticles (NPs) at room temperature. The phase composition of Ag/Fe₃O₄ NCs was revealed by morphological and structural assessment. The derived Ag/Fe₃O₄ nanocomposites demonstrated outstanding antimicrobial activity against Gram-negative Pseudomonas aeruginosa comparing to Gram-positive Bacillus subtilis which was determined by the agar well diffusion method. This is due to positively charged surface of metal oxide NPs that may bind to cell membrane. Interestingly, Ag–Fe₃O₄ NCs demonstrated good photocatalytic activity for organic dye degradation. According to a kinetic study, Ag/Fe₃O₄ MSC removed 99% of Rhodamine B at a rate constant of 1.89 min^?1. The photoelectron could perhaps ultimately collide only with dissolved solids in the substrate to form superoxides, which can damage the dye. Notably, the MSCs reusability was tested using magnetic detachment without sacrificing photocatalytic efficiency. This finding represents a significant breakthrough in the domain of wastewater treatment and biomedicine.     

Synthesis of Fe3O4, Fe2O3, Ag/Fe3O4 and Ag/Fe2O3 nanoparticles and their electrocatalytic properties

Two important iron oxides:Fe3O4 and Fe2O3,as well as Fe3O4 and Fe2O3 nanoparticles mingling with Ag were successfully synthesized via a hydrothermal procedure.The samples were confirmed and characterized by X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).The morphology of the samples was observed by transmission electron microscopy(TEM).The results indicated Fe3O4,Fe2O3,Ag/Fe3O4 and Ag/Fe2O3 samples all were nanoparticles with smaller sizes.The samples were modified on a glassy carbon electrode and their elctrocatalytic properties for p-nitrophenol in a basic solution were investigated.The results revealed all the samples showed enhanced catalytic performances by comparison with a bare glassy carbon electrode.Furthermore,p-nitrophenol could be reduced at a lower peak potential or a higher peak current on a glassy carbon electrode modified with Ag/Fe3O4 or Ag/Fe2O3 composite nanoparticles.     

Palladium immobilized on amidoxime‐functionalized magnetic Fe3O4 nanoparticles: a highly stable and efficient magnetically recoverable nanocatalyst for sonogashira coupling reaction

We describe the synthesis of a novel Fe₃O₄/amidoxime (AO)/Pd nanocatalyst by grafting of AO groups on Fe₃O₄ nanoparticles and subsequent deposition of Pd nanoparticles. Prior to grafting of AO, the 2‐cyanoethyl‐functionalized Fe₃O₄ nanoparticles prepared through combining 2‐cyanoethyltriethoxysilane and Fe₃O₄ were treated with hydroxylamine. The AO‐grafted Fe₃O₄ nanoparticles were then used as a platform for the deposition of Pd nanoparticles. The catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning and transmission electron microscopies, vibrating sample magnetometry, wavelength‐ and energy‐dispersive X‐ray spectroscopies and inductively coupled plasma analysis. Fe₃O₄/AO/Pd is novel phosphine‐free recyclable heterogeneous catalyst for Sonogashira reactions. Interestingly, the novel catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled seven times without any significant loss in activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel Flower‐Like Ag‐SiO2‐MgO‐Al2O3 Material: Preparation,Characterization and Catalytic Application in Methanol Dehydrogenation

Catalytic direct dehydrogenation of methanol to formaldehyde was carried out over Ag‐SiO₂‐MgO‐Al₂O₃ catalysts prepared by sol‐gel method. The optimal preparation mass fractions were determined as 8.3% MgO, 16.5% Al₂O₃ and 20% silver loading. Using this optimum catalyst, excellent activity and selectivity were obtained. The conversion of methanol and the selectivity to formaldehyde both reached 100%, which were much higher than other previously reported silver supported catalysts. Based on combined characterizations, such as X‐ray diffraction (XRD), scanning electronic microscopy (SEM), diffuse reflectance ultraviolet‐visible spectroscopy (UV‐Vis, DRS), nitrogen adsorption at low temperature, temperature programmed desorption of ammonia (NH₃‐TPD), desorption of CO₂ (CO₂‐TPD), etc., the correlation of the catalytic performance to the structural properties of the Ag‐SiO₂‐ MgO‐Al₂O₃ catalyst was discussed in detail. This perfect catalytic performance in the direct dehydrogenation of methanol to formaldehyde without any side‐products is attributed to its unique flower‐like structure with a surface area less than 1 m²/g, and the strong interactions between neutralized support and the nano‐sized Ag particles as active centers.     

Synthesis,characterization and catalytic performance of core‐shell structure magnetic Fe3O4/P(GMA‐EGDMA)‐NH2/HPG‐COOH‐Pd catalyst

A strategy has been developed for the synthesis, characterization and catalysis of magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd core‐shell structure supported catalyst. The P(GMA‐EGDMA) polymer layer was coated on the surface of hollow magnetic Fe₃O₄ microspheres through the effect of KH570. The core‐shell magnetic Fe₃O₄/P(GMA‐EGDMA) modified by ‐NH₂ could be grafted with HPG. Then, the hyperbranched glycidyl (HPG) with terminal ‐OH were modified by ‐COOH and adsorbed Pd nanoparticles. The hyperbranched polymer layer not only protected the Fe₃O₄ magnetic core from acid–base substrate corrosion, but also provided a number of functional groups as binding sites for Pd nanoparticles. The prepared catalyst was characterized by UV–vis, TEM, SEM, FTIR, TGA, ICP‐OES, BET, XRD, DLS and VSM. The catalytic tests showed that the magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd catalyst had excellent catalytic performance and retained 86% catalytic efficiency after 8 consecutive cycles.     

Hydrophobic poly(lauryl methacrylate)‐coated magnetic nano‐composite particles for removal of organic pollutants

This paper described a simple novel technique to prepare magnetic nano‐composite particles coated with highly crosslinked poly(lauryl methacrylate) (PLMA), a hydrophobic polymer because of its long chain alkyl group for application in waste water purification. Nano‐sized magnetite (Fe₃O₄) particles prepared by coprecipitation of Fe²⁺ and Fe³⁺ from their alkali aqueous solution were encapsulated with SiO₂ following treatment with tetraethylorthosilicate (TEOS). Finally precipitation copolymerization of LMA and divinyl benzene (DVB) in the presence of Fe₃O₄/SiO₂ particles was carried out within stable isolated droplets containing hexadecane–toluene mixture (4:1 mixture HD‐T). The produced PLMA‐coated magnetic composite particles named as Fe₃O₄/SiO₂/P(LMA‐DVB) were characterized by Fourier Transform IR (FTIR), transmission electron microscopy (TEM), thermogravimetry (TG) and X‐ray diffractometer (XRD) analyses. The performance of the composite particles was evaluated for the removal of organic pollutants from water. Copyright © 2015 John Wiley & Sons, Ltd.     

Deposition of PdPtAu Nanoparticles on Hollow Nanospheres of Fe3O4 as a New Catalyst for Methanol Electrooxidation: Application in Direct Methanol Fuel Cell

In this study, immobilized hollow nanospheres of Fe₃O₄ with Palladium, Platinum and Gold nanoparticles (Fe₃O₄HNS‐PdPtAuNPs) was synthesized by hydrothermal and chemical reduction methods and characterized by various techniques such as field emission scanning electron microscopy, energy dispersive analysis of X‐rays and elemental mapping images. The electrocatalytic activity of the modified glassy carbon electrode (GCE) with Fe₃O₄HNS‐PdPtAuNPs (GCE/Fe₃O₄HNS‐PdPtAuNPs) toward methanol electrooxidation was investigated by cyclic voltammetry and chronoamperometry in 1 M NaOH solution. According to the results, Fe₃O₄HNS‐PdPtAuNPs catalyst demonstrated the highest efficiency for methanol electrooxidation in comparison with Fe₃O₄HNS‐PdNPs, Fe₃O₄HNS‐PtNPs, Fe₃O₄HNS‐PdAuNPs, Fe₃O₄HNS‐PtAuNPs and Fe₃O₄HNS‐PdPtNPs. The value of electron transfer coefficient (α ) and the ratio of current densities (I_f /I_b ) for methanol oxidation on the Fe₃O₄HNS‐PdPtAuNPs/GC catalyst were calculated 0.61 and 5.13, respectively. The reaction order was discovered to be 0.98 for CH₃OH. A direct methanol fuel cell was developed with the suggested catalyst under several conditions.