A Cation‐Exchange Approach for the Fabrication of Efficient Methylammonium Tin Iodide Perovskite Solar Cells

Tin‐based halide perovskite materials have been successfully employed in lead‐free perovskite solar cells, but the overall power conversion efficiencies (PCEs) have been limited by the high carrier concentration from the facile oxidation of Sn²⁺ to Sn⁴⁺. Now a chemical route is developed for fabrication of high‐quality methylammonium tin iodide perovskite (MASnI₃) films: hydrazinium tin iodide (HASnI₃) perovskite film is first solution‐deposited using presursors hydrazinium iodide (HAI) and tin iodide (SnI₂), and then transformed into MASnI₃ via a cation displacement approach. With the two‐step process, a dense and uniform MASnI₃ film is obtained with large grain sizes and high crystallization. Detrimental oxidation is suppressed by the hydrazine released from the film during the transformation. With the MASnI₃ as light harvester, mesoporous perovskite solar cells were prepared, and a maximum power conversion efficiency (PCE) of 7.13 % is delivered with good reproducibility.     

How Methylammonium Iodide Reactant Size Affects Morphology and Defect Properties of Mechanochemically Synthesized MAPbI3 Powder

Here, we investigate in detail the impact of the size of the methylammonium iodide (MAI) reactants in the mechanochemical powder synthesis of the halide perovskite methylammonium lead iodide (MAPbI₃). Morphology and structural characterizations by scanning electron microscopy and X-ray diffraction reveal that with increasing MAI reactant size, the particle size of the perovskite powder increases, while its defect density decreases, as suggested by nuclear quadrupole resonance spectroscopy and photoluminescence investigations. The reason for this behavior seems to be associated to the sensitive influence of the MAI size on the time durations of MAPbI₃ synthesis and delayed MAPbI₃ crushing stage during ball milling. Thus, our results emphasize the high importance the reactant properties have on the mechanochemical synthesis of halide perovskites and will contribute to enhance the reproducibility and control of the fabrication of halide perovskites in powder form.     

The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers

In this paper we report on the influence of light and oxygen on the stability of CH₃NH₃PbI₃ perovskite‐based photoactive layers. When exposed to both light and dry air the mp‐Al₂O₃/CH₃NH₃PbI₃ photoactive layers rapidly decompose yielding methylamine, PbI₂, and I₂ as products. We show that this degradation is initiated by the reaction of superoxide (O₂^?) with the methylammonium moiety of the perovskite absorber. Fluorescent molecular probe studies indicate that the O₂^? species is generated by the reaction of photoexcited electrons in the perovskite and molecular oxygen. We show that the yield of O₂^? generation is significantly reduced when the mp‐Al₂O₃ film is replaced with an mp‐TiO₂ electron extraction and transport layer. The present findings suggest that replacing the methylammonium component in CH₃NH₃PbI₃ to a species without acid protons could improve tolerance to oxygen and enhance stability.     

Similar Structural Dynamics for the Degradation of CH3NH3PbI3 in Air and in Vacuum

We investigate the degradation path of MAPbI₃ (MA=methylammonium) films over flat TiO₂ substrates at room temperature by means of X‐ray diffraction, spectroscopic ellipsometry, X‐ray photoelectron spectroscopy, and high‐resolution transmission electron microscopy. The degradation dynamics is found to be similar in air and under vacuum conditions, which leads to the conclusion that the occurrence of intrinsic thermodynamic mechanisms is not necessarily linked to humidity. The process has an early stage, which drives the starting tetragonal lattice in the direction of a cubic atomic arrangement. This early stage is followed by a phase change towards PbI₂. We describe how this degradation product is structurally coupled with the original MAPbI₃ lattice through the orientation of its constituent PbI₆ octahedra. Our results suggest a slight octahedral rearrangement after volatilization of HI+CH₃NH₂ or MAI, with a relatively low energy cost. Our experiments also clarify why reducing the interfaces and internal defects in the perovskite lattice enhances the stability of the material.     

Freezing the polarization of CH3NH3PbI3 and CH3NH3PbI3-xClx perovskite films

Thin films of methylammonium lead halides, CH₃NH₃PbI₃ and CH₃NH₃PbI_3-xCl_x, were deposited onto symmetrical microstructured electrode arrays of gold or platinum on Si/SiO₂ wafers. Polarization studies were carried out on perovskite films under vacuum in the dark. For poling, a constant voltage was applied to the samples while the temperature was cycled between 295 K and 4 K. The measured current densities depending on the temperature showed distinct characteristics relating strongly to the crystal phase and the dielectric properties of the perovskite films. Voltage sweeps were carried out at different scan rates at specific temperature intervals after poling. The polarization of the films due to the migration of iodide vacancies in direction of the blocking perovskite/metal interface was frozen almost up to room temperature. Charge carriers were only able to cross the blocking barrier and contribute to the current where the ions have accumulated during poling. All J-V curves showed hysteresis: inverted and regular hysteresis at room temperature and below, respectively. Inverted hysteresis originates from the slow accumulation of ions at the blocking barrier, while regular hysteresis arises from a distortion in the adjacent crystals which will be discussed.     

Top‐Down Fabrication of Stable Methylammonium Lead Halide Perovskite Nanocrystals by Employing a Mixture of Ligands as Coordinating Solvents

A top‐down method is demonstrated for the fabrication of CH₃NH₃PbBr₃ and CH₃NH₃PbI₃ perovskite nanocrystals, employing a mixture of ligands oleic acid and oleylamine as coordinating solvents. This approach avoids the use of any polar solvents, skips multiple reaction steps by employing a simple ultrasonic treatment of the perovskite precursors, and yields rather monodisperse blue‐, green‐, and red‐emitting methylammonium lead halide nanocrystals with a high photoluminescence quantum yield (up to 72 % for the green‐emitting nanocrystals) and remarkably improved stability. After discussing all relevant reaction parameters, the green‐emitting CH₃NH₃PbBr₃ nanocrystals are employed as a component of down‐conversion white‐light‐emitting devices_.     

Ion‐Exchange‐Induced 2D–3D Conversion of HMA1−xFAxPbI3Cl Perovskite into a High‐Quality MA1−xFAxPbI3 Perovskite

High‐quality phase‐pure MA_1?xFA_xPbI₃ planar films (MA=methylammonium, FA=formamidinium) with extended absorption and enhanced thermal stability are difficult to deposit by regular simple solution chemistry approaches owing to crystallization competition between the easy‐to‐crystallize but unwanted δ‐FAPbI₃/MAPbI₃ and FA_xMA_1?xPbI₃ requiring rigid crystallization conditions. Here A 2D–3D conversion to transform compact 2D mixed composition HMA_1?xFA_xPbI₃Cl perovskite precursor films into 3D MA_1?xFA_xPbI₃ (x=0.1–0.9) perovskites is presented. The designed Cl/I and H/FA(MA) ion exchange reaction induced fast transformation of compact 2D perovskite film, helping to form the phase‐pure and high quality MA_1?xFA_xPbI₃ without δ‐FAPbI₃ and MAPbI₃ impurity. In all, we successfully developed a facile one‐step method to fabricate high quality phase‐pure MA_1?xFA_xPbI₃ (x=0.1–0.9) perovskite films by 2D–3D conversion of HMA_1?xFA_xPbI₃Cl perovskite. This 2D–3D conversion is a promising strategy for lead halide perovskite fabrication.     

Role of the Iodide–Methylammonium Interaction in the Ferroelectricity of CH3NH3PbI3

Excellent conversion efficiencies of over 20 % and facile cell production have placed hybrid perovskites at the forefront of novel solar cell materials, with CH₃NH₃PbI₃ being an archetypal compound. The question why CH₃NH₃PbI₃ has such extraordinary characteristics, particularly a very efficient power conversion from absorbed light to electrical power, is hotly debated, with ferroelectricity being a promising candidate. This does, however, require the crystal structure to be non‐centrosymmetric and we herein present crystallographic evidence as to how the symmetry breaking occurs on a crystallographic and, therefore, long‐range level. Although the molecular cation CH₃NH₃⁺ is intrinsically polar, it is heavily disordered and this cannot be the sole reason for the ferroelectricity. We show that it, nonetheless, plays an important role, as it distorts the neighboring iodide positions from their centrosymmetric positions.     

Coordination Chemistry Dictates the Structural Defects in Lead Halide Perovskites

We show the influence of species present in precursor solution during formation of lead halide perovskite materials on the structural defects of the films. The coordination of lead by competing solvent molecules and iodide ions dictate the type of complexes present in the films. Depending on the processing conditions all PbIS₅⁺, PbI₂S_4, PbI₃S₃^?, PbI₄S₂^2?, PbI₅S₂^3?, PbI₆^4?and 1D (Pb₂I₄)_n chains are observed by absorption measurements. Different parameters are studied such as polarity of the solvent, concentration of iodide ions, concentration of solvent molecules and temperature. It is concluded that strongly coordinating solvents will preferentially form species with a low number of iodide ions and less coordinative solvents generate high concentration of PbI₆^?. We furthermore propose that all these plumbate ions may act as structural defects determining electronic properties of the photovoltaic films.     

Methylammonium Bismuth Iodide as a Lead‐Free,Stable Hybrid Organic–Inorganic Solar Absorber

Methylammonium lead halide (MAPbX₃) perovskites exhibit exceptional carrier transport properties. But their commercial deployment as solar absorbers is currently limited by their intrinsic instability in the presence of humidity and their lead content. Guided by our theoretical predictions, we explored the potential of methylammonium bismuth iodide (MBI) as a solar absorber through detailed materials characterization. We synthesized phase‐pure MBI by solution and vapor processing. In contrast to MAPbX₃, MBI is air stable, forming a surface layer that does not increase the recombination rate. We found that MBI luminesces at room temperature, with the vapor‐processed films exhibiting superior photoluminescence (PL) decay times that are promising for photovoltaic applications. The thermodynamic, electronic, and structural features of MBI that are amenable to these properties are also present in other hybrid ternary bismuth halide compounds. Through MBI, we demonstrate a lead‐free and stable alternative to MAPbX₃ that has a similar electronic structure and nanosecond lifetimes.     

Correlation between Interfacial Structures and Device Performance: The Double-Edged Sword Effect of Lead Iodide in Perovskite Solar Cells

The interfacial electronic structure of perovskite layers and transport layers is critical for the performance and stability of perovskite solar cells (PSCs). The device performance of PSCs can generally be improved by adding a slight excess of lead iodide (PbI₂) to the precursor solution. However, its underlying working mechanism is controversial. Here, we performed a comprehensive study of the electronic structures at the interface between CH₃NH₃PbI₃ and C₆₀ with and without the modification of PbI₂ using in situ photoemission spectroscopy measurements. The correlation between the interfacial structures and the device performance was explored based on performance and stability tests. We found that there is an interfacial dipole reversal, and the downward band bending is larger at the CH₃NH₃PbI₃/C₆₀ interface with the modification of PbI₂ as compared to that without PbI₂. Therefore, PSCs with PbI₂ modification exhibit faster charge carrier transport and slower carrier recombination. Nevertheless, the modification of PbI₂ undermines the device stability due to aggravated iodide migration. Our findings provide a fundamental understanding of the CH₃NH₃PbI₃/C₆₀ interfacial structure from the perspective of the atomic layer and insight into the double-edged sword effect of PbI₂ as an additive.     

A Purified,Solvent‐Intercalated Precursor Complex for Wide‐Process‐Window Fabrication of Efficient Perovskite Solar Cells and Modules

A high‐purity methylammonium lead iodide complex with intercalated dimethylformamide (DMF) molecules, CH₃NH₃PbI₃?DMF, is introduced as an effective precursor material for fabricating high‐quality solution‐processed perovskite layers. Spin‐coated films of the solvent‐intercalated complex dissolved in pure dimethyl sulfoxide (DMSO) yielded thick, dense perovskite layers after thermal annealing. The low volatility of the pure DMSO solvent extended the allowable time for low‐speed spin programs and considerably relaxed the precision needed for the antisolvent addition step. An optimized, reliable fabrication method was devised to take advantage of this extended process window and resulted in highly consistent performance of perovskite solar cell devices, with up to 19.8 % power‐conversion efficiency (PCE). The optimized method was also used to fabricate a 22.0 cm², eight‐cell module with 14.2 % PCE (active area) and 8.64 V output (1.08 V/cell).     

A Purified,Solvent‐Intercalated Precursor Complex for Wide‐Process‐Window Fabrication of Efficient Perovskite Solar Cells and Modules

A high‐purity methylammonium lead iodide complex with intercalated dimethylformamide (DMF) molecules, CH₃NH₃PbI₃?DMF, is introduced as an effective precursor material for fabricating high‐quality solution‐processed perovskite layers. Spin‐coated films of the solvent‐intercalated complex dissolved in pure dimethyl sulfoxide (DMSO) yielded thick, dense perovskite layers after thermal annealing. The low volatility of the pure DMSO solvent extended the allowable time for low‐speed spin programs and considerably relaxed the precision needed for the antisolvent addition step. An optimized, reliable fabrication method was devised to take advantage of this extended process window and resulted in highly consistent performance of perovskite solar cell devices, with up to 19.8 % power‐conversion efficiency (PCE). The optimized method was also used to fabricate a 22.0 cm², eight‐cell module with 14.2 % PCE (active area) and 8.64 V output (1.08 V/cell).     

Self‐Regulation Mechanism for Charged Point Defects in Hybrid Halide Perovskites

Hybrid halide perovskites such as methylammonium lead iodide (CH₃NH₃PbI₃) exhibit unusually low free‐carrier concentrations despite being processed at low‐temperatures from solution. We demonstrate, through quantum mechanical calculations, that an origin of this phenomenon is a prevalence of ionic over electronic disorder in stoichiometric materials. Schottky defect formation provides a mechanism to self‐regulate the concentration of charge carriers through ionic compensation of charged point defects. The equilibrium charged vacancy concentration is predicted to exceed 0.4 % at room temperature. This behavior, which goes against established defect conventions for inorganic semiconductors, has implications for photovoltaic performance.     

Cesium Methylammonium Lead Iodide (CsxMA1−xPbI3) Nanocrystals with Wide Range Cation Composition Tuning and Enhanced Thermal Stability of the Perovskite Phase

Cesium methylammonium lead iodide (Cs_xMA_1−xPbI₃) nanocrystals were obtained with a wide range of A-site Cs-MA compositions by post-synthetic, room temperature cation exchange between CsPbI₃ nanocrystals and MAPbI₃ nanocrystals. The alloyed Cs_xMA_1−xPbI₃ nanocrystals retain their photoactive perovskite phase with incorporated Cs content, x, as high as 0.74 and the expected composition-tunable photoluminescence (PL). Excess methylammonium oleate from the reaction mixture in the MAPbI₃ nanocrystal dispersions was necessary to obtain fast Cs-MA cation exchange. The phase transformation and degradation kinetics of films of Cs_xMA_1−xPbI₃ nanocrystals were measured and modeled using an Avrami expression. The transformation kinetics were significantly slower than those of the parent CsPbI₃ and MAPbI₃ nanocrystals, with Avrami rate constants, k, at least an order of magnitude smaller. These results affirm that A-site cation alloying is a promising strategy for stabilizing iodide-based perovskites.     

A Fast Deposition‐Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin‐Film Solar Cells

Thin‐film photovoltaics based on alkylammonium lead iodide perovskite light absorbers have recently emerged as a promising low‐cost solar energy harvesting technology. To date, the perovskite layer in these efficient solar cells has generally been fabricated by either vapor deposition or a two‐step sequential deposition process. We report that flat, uniform thin films of this material can be deposited by a one‐step, solvent‐induced, fast crystallization method involving spin‐coating of a DMF solution of CH₃NH₃PbI₃ followed immediately by exposure to chlorobenzene to induce crystallization. Analysis of the devices and films revealed that the perovskite films consist of large crystalline grains with sizes up to microns. Planar heterojunction solar cells constructed with these solution‐processed thin films yielded an average power conversion efficiency of 13.9±0.7 % and a steady state efficiency of 13 % under standard AM 1.5 conditions.     

A Modified Sequential Deposition Route for High-Performance Carbon-Based Perovskite Solar Cells under Atmosphere Condition

Carbon-based hole transport material (HTM)-free perovskite solar cells have exhibited a promising commercialization prospect, attributed to their outstanding stability and low manufacturing cost. However, the serious charge recombination at the interface of the carbon counter electrode and titanium dioxide (TiO₂) suppresses the improvement in the carbon-based perovskite solar cells’ performance. Here, we propose a modified sequential deposition process in air, which introduces a mixed solvent to improve the morphology of lead iodide (PbI₂) film. Combined with ethanol treatment, the preferred crystallization orientation of the PbI₂ film is generated. This new deposition strategy can prepare a thick and compact methylammonium lead halide (MAPbI₃) film under high-humidity conditions, which acts as a natural active layer that separates the carbon counter electrode and TiO₂. Meanwhile, the modified sequential deposition method provides a simple way to facilitate the conversion of the ultrathick PbI₂ capping layer to MAPbI₃, as the light absorption layer. By adjusting the thickness of the MAPbI₃ capping layer, we achieved a power conversation efficiency (PCE) of 12.5% for the carbon-based perovskite solar cells.     

1D lead iodide crystals encapsulated within single walled carbon nanotubes

The structure and binding energies of lead iodide crystals encapsulated within single‐walled carbon noanotubes are studied using density functional theory. Calculations were performed on the simulated PbI₂ structure encapsulated within a (12,12) single‐walled nanotube, to investigate the perturbations on the PbI₂ crystal and tube structure and electronic structure, and to estimate the binding energy. The calculation confirms the structure as a single chain of PbI₆ octahedra bound by two chains of PbI₅ square pyramids. The calculated binding energy shows that the encapsulation is noncovalent. Minimal charge transfer is observed between nanotube and the PbI₂ crystals. The band gap is shown to increase from the bulk to the encapsulated structure. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Methylammonium‐Mediated Evolution of Mixed‐Organic‐Cation Perovskite Thin Films: A Dynamic Composition‐Tuning Process

Methylammonium‐mediated phase‐evolution behavior of FA_1−xMA_xPbI₃ mixed‐organic‐cation perovskite (MOCP) is studied. It is found that by simply enriching the MOCP precursor solutions with excess methylammonium cations, the MOCPs form via a dynamic composition‐tuning process that is key to obtaining MOCP thin films with superior properties. This simple chemical approach addresses several key challenges, such as control over phase purity, uniformity, grain size, composition, etc., associated with the solution‐growth of MOCP thin films with targeted compositions.     

Controllable Growth of Perovskite Films by Room‐Temperature Air Exposure for Efficient Planar Heterojunction Photovoltaic Cells

A two‐step solution processing approach has been established to grow void‐free perovskite films for low‐cost high‐performance planar heterojunction photovoltaic devices. A high‐temperature thermal annealing treatment was applied to drive the diffusion of CH₃NH₃I precursor molecules into a compact PbI₂ layer to form perovskite films. However, thermal annealing for extended periods led to degraded device performance owing to the defects generated by decomposition of perovskite into PbI₂. A controllable layer‐by‐layer spin‐coating method was used to grow “bilayer” CH₃NH₃I/PbI₂ films, and then drive the interdiffusion between PbI₂ and CH₃NH₃I layers by a simple air exposure at room temperature for making well‐oriented, highly crystalline perovskite films without thermal annealing. This high degree of crystallinity resulted in a carrier diffusion length of ca. 800 nm and a high device efficiency of 15.6 %, which is comparable to values reported for thermally annealed perovskite films.