Influence of Structural Parameters on the Self‐Association Properties of Anti‐HIV Catanionic Dendrimers

The self‐association properties of anti‐HIV catanionic dendrimers as multivalent galactosylceramide (GalCer)‐derived inhibitors are presented. The study was designed to elucidate the origin of the relatively high cytotoxicity values of these anti‐HIV catanionic dendrimers, which have previously been found to exhibit in vitro anti‐HIV activity in the submicromolar range. The physicochemical properties of these catanionic dendrimers were studied to tentatively correlate the structural parameters with self‐association and biological properties. We can conclude from this study that the absence of correlation between the hydrophobicity and the cytotoxicity of the catanionic systems could be explained by the partial segregation of the different partners of the catanionic entities.     

Effect of the Cationic Surfactant Moiety on the Structure of Water Entrapped in Two Catanionic Reverse Micelles Created from Ionic Liquid‐Like Surfactants

The behavior of water entrapped in reverse micelles (RMs) formed by two catanionic ionic liquid‐like surfactants, benzyl‐n‐hexadecyldimethylammonium 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT‐BHD) and cetyltrimethylammonium 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT‐CTA), was investigated by using dynamic (DLS) and static (SLS) light scattering, FTIR, and ¹H NMR spectroscopy techniques. To the best of our knowledge, this is the first report in which AOT‐CTA has been used to create RMs and encapsulate water. DLS and SLS results revealed the formation of RMs in benzene and the interaction of water with the RM interface. From FTIR and ¹H NMR spectroscopy data, a difference in the magnitude of the water–catanionic surfactant interaction at the interface is observed. For the AOT‐BHD RMs, a strong water–surfactant interaction can be invoked whereas for AOT‐CTA this interaction seems to be weaker. Consequently, more water molecules interact with the interface in AOT‐BHD RMs with a completely disrupted hydrogen‐bond network, than in AOT‐CTA RMs in which the water structure is partially preserved. We suggest that the benzyl group present in the BHD⁺ moiety in AOT‐BHD is responsible for the behavior of the catanionic interface in comparison with the interface created in AOT‐CTA. These results show that a simple change in the cationic component in the catanionic surfactant promotes remarkable changes in the RMs interface with interesting consequences, in particular when using the systems as nanoreactors.     

Phase behavior in mixtures of cationic and anionic surfactants in aqueous solutions

Phase behavior of cationic/anionic surfactant mixtures of the same chain length (n=10, 12 or 14) strongly depends on the molar ratio and actual concentration of the surfactants. Precipitation of catanionic surfactant and mixed micelles formation are observed over the concentration range investigated. Coacervate and liquid crystals are found to coexist in the transition region from crystalline catanionic surfactant to mixed micelles.The addition of oppositely charged surfactant diminishes the surface charge density at the mixed micelle/solution interface and enhances the apparent degree of counterion dissociation from mixed micelles. Cationic surfactants have a greater tendency to be incorporated in mixed micelles than anionic ones.     

正、负离子表面活性剂凝胶化正丁醇

利用正、负离子表面活性剂混合体系月桂酸钠/十六烷基三甲基溴化铵(SL/CTAB)成功实现了正丁醇的凝胶化, 并借助流变仪、扫描电子显微镜(SEM)研究了该凝胶的流变性质和微观形貌. 实验发现, 正、负离子表面活性剂的浓度及混合比例对正丁醇凝胶的形成具有较大影响, 只有在合适的浓度和混合比例下正丁醇才能被有效地凝胶化. 在正丁醇能够形成凝胶的前提下, 固定正、负离子表面活性剂混合体系中某一组分的浓度, 体系的粘度随着另一组分浓度的增加而增大. 流变结果表明该凝胶具有剪切变稀的非牛顿流体特性. 微观形貌的研究表明所形成的凝胶具有典型的三维网络结构, 厚度相对均一的带状纤维是组成网络的结构单元. 进一步的研究表明, 正、负离子表面活性剂碳氢链的疏溶剂作用、极性头基间的静电吸引作用、表面活性剂与正丁醇分子间的氢键作用对凝胶的形成起到重要的作用.     

New Ion‐Pair Based All‐Solid‐State Surfactant Sensitive Sensor for Potentiometric Determination of Cationic Surfactants

Cationic surfactants of different types were determined using a few potentiometric sensors based on ion‐pair complexes (dodecyldimethylbenzylammonium dodecylsulfate, dodecylmethylbenzylammonium dodecylbenzensulfonate, tetrahexadecylammonium dodecylsulfate and Hyamine (benzethonium dodecylsulfate)) as sensing materials. The response of the all‐solid state surfactant sensitive electrode based on a Teflonized graphite conducting substrate, coated with a PVC membrane containing sensing material, was investigated in the solutions of Hyamine and hexadecyltrimethylammonium ion in the concentration range from 1 μM to 10 mM. Potentiometric surfactant cation titration has been performed using sodium dodecylsulfate as titrant and an ion‐pair‐based surfactant sensitive electrode as a potentiometric indicator. Several commercial surfactant products have also been titrated and the results were compared with those obtained with two‐phase standard titration method.     

Formation and Properties of Self‐Assembly‐Driven Fluorescent Nanoparticle Sensors

Fluorescent nanoparticles (FNPs) are obtained in water by self‐assembly from a polymeric ionic liquid, fluorescent carboxylate moiety, and a surfactant through two main supramolecular interactions, that is, ionic bonds and hydrophobic/hydrophilic interactions. The hydrophobicity of the surfactant is tunable and a highly hydrophobic surfactant increases the fluorescence intensity and stability of the FNPs. The fluorescence of the FNPs is sensitive to a quenching effect by various ions with high selectivity, and consequently, they may be used as sensors. The self‐assembly approach used to generate the FNPs is considerably simpler than other methods based on more challenging synthetic methods and the flexibility of the approach should allow a wide and diverse range of FNPs to be prepared with specific sensor applications.     

How Nano‐Ions Act Like Ionic Surfactants

Recently, nanometric ions were shown to adsorb to hydrated neutral surfaces and to bind to the cavities of macrocyclic molecules with an unexpectedly strong affinity arising from a solvent‐mediated effect named superchaotropicity. We show here that nano‐ions at low concentrations (μm range), similarly to anionic surfactants, induce the spontaneous transformation of a swollen lyotropic lamellar phase of non‐ionic surfactant into a vesicle phase. This transition occurs when the neutral lamellae acquire charges, either by adsorption of the nano‐ions onto, or by anchoring of the ionic surfactant into the lamellae. In contrast to ionic surfactants, nano‐ions strongly dehydrate the neutral surfactant assemblies. As a conclusion, these purely inorganic nanometric ions act as alternatives to the widely used organic ionic surfactants.     

Size,Charge, and Stability of Fully Serine‐Based Catanionic Vesicles: Towards Versatile Biocompatible Nanocarriers

Vesicles based on mixed cationic and anionic surfactants (catanionic vesicles) offer a number of advantageous colloidal features over conventional lipid‐based vesicles, namely spontaneity in formation, long‐term stability, and easy modulation of size and charge. If biocompatibility is added through rational design of the chemical components, the potential for biorelated applications further emerges. Here, we report for the first time on two catanionic vesicle systems in which both ionic amphiphiles are derivatized from the same amino acid—serine—with the goal of enhancing aggregate biocompatibility. Phase behavior maps for a mixture with chain length symmetry, 12Ser/12‐12Ser, and another with asymmetry, 16Ser/8‐8Ser, are presented, for which regions of vesicles, micelles, and coexisting aggregates are identified. For the asymmetric mixture, detailed phase behavior and microstructure characterization have been carried out based on surface tension, light microscopy, cryo‐SEM, cryo‐TEM, and dynamic light scattering analysis. Vesicles are found with tunable mean size, pH, and zeta potential. Changes in aggregate shape with varying composition and the effect of preparation methods and aging on vesicle features and stability have been investigated in detail. The results are discussed in the light of self‐assembly models and related catanionic systems reported before. A versatile system of robust vesicles is thus presented for potential applications.     

Bile salt-induced vesicle-to-micelle transition in catanionic surfactant systems: steric and electrostatic interactions

The vesicle-to-micelle transition (VMT) was realized in catanionic surfactant systems by the addition of two kinds of bile salts, sodium cholate (SC) and sodium deoxycholate (SDC). It was found that steric interaction between the bile salt and catanionic surfactant plays an important role in catanionic surfactant systems that are usually thought to be dominated by electrostatic interaction. The facial amphiphilic structure and large occupied area of the bile salt are crucial to the enlargement of the average surfactant headgroup area and result in the VMT. Moreover, bile salts can also induce a macroscopic phase transition. Freeze-fracture transmission electron microscopy, dynamic light scattering, isothermal titration calorimetry, and absorbance measurements were used to follow the VMT process.     

Catanionic aggregates formed from drugs and lauric or capric acids enable prolonged release from gels

The aim of this study was to add to the range of charged surfactants that can be used to form catanionic aggregates with oppositely charged surface active drug substances; and to apply these aggregates to prolong drug release from gels. The surfactants used in this study, lauric and capric acids are of natural origin-unlike traditionally used, synthetic, surfactants. The mixtures of drug substances and oppositely charged surfactants were studied visually and with cryogenic transmission electron microscopy. Drug release from gels was studied with a modified USP paddle method. This study shows that lauric and capric acids are as, or even more, active in forming catanionic aggregates than traditionally used surfactants such as sodium dodecyl sulfate. It is shown that the length of the hydrophobic part of the surfactant plays an important role in the formation of pharmaceutically interesting catanionic aggregates. As seen in previous studies, using catanionic vesicles prolongs the drug release from gels and decreases the apparent diffusion coefficient by a factor of 10-50, compared to a gel containing only drug substance.     

New catanionic surfactants, phase stability and synthesis of ultrafine CdS nanoparticles

A systematic study on the water-intake capacity of the microemulsion formed using a catanionic surfactant (synthesized by taking equimolar mixture of acid and amine) with varying hydrocarbon chain length of the acid has been carried out. A decrease in the water-intake capacity with increase in the chain length was observed. Shorter chain length of co-surfactant (1-butanol compared to 1-octanol) led to higher water-intake capacity of microemulsions which may also be attributed to the high hydrophilic-lipophilic balance (HLB) of 1-butanol. Three new microemulsions based on catanionic surfactants have been used to synthesize quantum dots of CdS. The size of CdS quantum dots decreased with increase in chain length of the acid component of the catanionic surfactant.     

A Femtosecond Study of Solvation Dynamics and Anisotropy Decay in a Catanionic Vesicle: Excitation‐Wavelength Dependence

The structure and dynamics of a catanionic vesicle are studied by means of femtosecond up‐conversion and dynamic light scattering (DLS). The catanionic vesicle is composed of dodecyl‐trimethyl‐ammonium bromide (DTAB) and sodium dodecyl sulphate (SDS). The DLS data suggest that 90 % of the vesicles have a diameter of about 400 nm, whereas the diameter of the other 10 % is about 50 nm. The dynamics in the catanionic vesicle are compared with those in pure SDS and DTAB micelles. We also study the dynamics in different regions of the micelle/vesicle by varying the excitation wavelength (λ_ex) from 375 to 435 nm. The catanionic vesicle is found to be more heterogeneous than the SDS or DTAB micelles, and hence, the λ_ex‐dependent variation of the solvation dynamics is more prominent in the first case. The solvation dynamics in the vesicle and the micelles display an ultraslow component (2 and 300 ps, respectively), which arises from the quasibound, confined water inside the micelle, and an ultrafast component (<0.3 ps), which is due to quasifree water at the surface/exposed region. With an increase in λ_ex, the solvation dynamics become faster. This is manifested in a decrease in the total dynamic solvent shift and an increase in the contribution of the ultrafast component (<0.3 ps). At a long λ_ex (435 nm), the surface (exposed region) of a micelle/vesicle is probed, where the solvation dynamics of the water molecules are faster than those in a buried location of the vesicle and the micelles. The time constant of anisotropy decay becomes longer with increasing λ_ex, in both the catanionic vesicle and the ordinary micelles (SDS and DTAB). The slow rotational dynamics (anisotropy decay) in the polar region (at long λ_ex) may be due to the presence of ionic head groups and counter ions.     

Investigations into the bending constant and edge energy of bilayers of salt-free catanionic vesicles

Using molecular dynamics simulation, we performed theoretical calculations on the curvature constant and edge energy of bilayers of salt-free, zero-charged, cationic and anionic (catanionic) surfactant vesicles composed of alkylammonium cations (C(m)(+)) and fatty acid anions (C(n)(-)). Both the minimum size and edge energy of vesicles were calculated to examine the relation between the length of the surfactant molecules and the mechanical properties of the catanionic bilayers. Our simulation results clearly demonstrate that, when the chain lengths of the cationic and anionic surfactants are equal, both the edge energy and the rigidity of the catanionic bilayers increase dramatically, changing from around 0.36 to 2.77 kBT·nm(-1) and around 0.86 to 6.51 kBT·nm(-1), respectively. For the smallest catanionic vesicles, the curvature is not uniform and the surfactant molecules adopt a multicurvature arrangement in the vesicle bilayers. We suspect that the multicurvature bending of bilayers of catanionic vesicles is a common phenomenon in rigid bilayer systems, which could aid understanding of ion transport through bilayer membranes.     

Effect of sodium dodecyl sulfate and cetyltrimethylammonium bromide catanionic surfactant on the enzymatic hydrolysis of Avicel and corn stover

Nonionic surfactants could effectively improve the enzymatic hydrolysis efficiency of lignocellulose, while small molecule anionic and cationic surfactants usually inhibited the enzymatic hydrolysis. The results showed that the anionic surfactant sodium dodecyl sulfate (SDS) could improve the enzymatic hydrolysis efficiency of Avicel at the concentration range of 0.1–1 mM, but it did inhibit enzymatic hydrolysis at higher concentration. Cationic surfactant cetyltrimethylammonium bromide (CTAB) was used to regulate the surface charge of SDS; thereby catanionic surfactant SDS-CTAB was formed. The effect of SDS-CTAB catanionic surfactant with varied molar ratios on the enzymatic hydrolysis of pure cellulose and corn stover at various enzymatic hydrolysis environments was investigated. SDS-CTAB could increase the enzymatic hydrolysis of corn stover at high solid loading from 33.3 to 42.4%. Using SDS-CTAB could reduce about 58% of the cellulase dosage to achieve 80% of the enzymatic hydrolysis of corn stover. SDS-CTAB catanionic surfactant could regulate the surface charge of cellulase in the hydrolyzate and reduce the non-productive adsorption of cellulase on the lignin, thereby improving the enzymatic hydrolysis efficiency of lignocellulose.     

Catanionic surfactants: microemulsion formation and solubilization

We review and summarize the three-phase behavior and solubilization of microemulsions with catanionic surfactants. Particular emphasis is placed to the three-phase behavior of mixtures of oil, water and alcohol with mixed surfactants containing one anionic and one cationic surfactant. The effect of salt and catanionic surfactant on the HLB composition and solubilizing capacity of surfactants to form microemulsions is discussed.     

Molecular dynamics study of catanionic bilayers composed of ion pair amphiphile with double-tailed cationic surfactant

The physical stability of catanionic vesicles is important for the development of novel drug or DNA carriers. For investigating the mechanism by which catanionic vesicles are stabilized, molecular dynamics (MD) simulation is an attractive approach that provides microscopic structural information on the vesicular bilayer. In this study, MD simulation was applied to investigate the bilayer properties of catanionic vesicles composed of an ion pair amphiphile (IPA), hexadecyltrimethylammonium-dodecylsulfate (HTMA-DS), and a double-tailed cationic surfactant, ditetradecyldimethylammonium chloride (DTDAC). Structural information regarding membrane elasticity and the organization and conformation of surfactant molecules was obtained based on the resulting trajectory. Simulation results showed that a proper amount of DTDAC could be used to complement the asymmetric structure between HTMA and DS, resulting in an ordered hydrocarbon chain packing within the rigid membrane observed in the mixed HTMA-DS/DTDAC system. The coexistence of gel and fluid phases was also observed in the presence of excess DTDAC. MD simulation results agreed well with results obtained from experimental studies examining mixed HTMA-DS/DTDAB vesicles.     

Determination of phthalate esters in liquor samples by vortex‐assisted surfactant‐enhanced‐emulsification liquid–liquid microextraction followed by GC–MS

A novel method using vortex‐assisted surfactant‐enhanced‐emulsification liquid–liquid microextraction has been developed for the extraction of phthalate esters (PAEs) in Chinese liquor samples prior to analysis by GC–MS. In the proposed method, a high‐density extraction solvent (carbon tetrachloride) was dispersed into samples with the aid of a surfactant (Triton X‐100) and vortex agitation, resulting in a short extraction equilibrium (30 s). After centrifugation, a single microdrop of solvent was easily collected for GC–MS analysis. Key factors that affected the extraction efficiency were optimized. Under the optimum conditions, linearity was found in the range from 0.05 to 50 μg/L. Coefficients of determination varied from 0.9938 to 0.9971. LODs, based on an S/N of 3, ranged from 4.9 to 13 ng/L. Enrichment factors varied from 140 to 184. Reproducibility and recoveries were assessed by testing a series of three liquor samples that were spiked with different concentration levels. Finally, the proposed method was successfully applied to the determination of PAEs in 16 Chinese liquor samples. In this work, high‐density‐solvent vortex‐assisted surfactant‐enhanced‐emulsification liquid–liquid microextraction was applied for the first time for the extraction of PAEs in Chinese liquor samples and was proved to be simple, rapid, and sensitive.     

Salt Effect on the Aggregation Behaviors of an Anionic Carboxylate Gemini and a Cationic Surfactant

The synthesis method and conditions for the carboxylate Gemini surfactant O,O′‐bis(sodium 2‐lauricate)‐p‐benzenediol (C₁₁pPHCNa) were explored. Surface tension data of the single and mixed systems of catanionic (cationic with anionic) surfactants with different salt concentrations were used to determine the CMC values and to obtain the information of self‐assembly behaviors of the surfactants. Aggregates' morphologies were observed by transmission electron microscopy (TEM) and speculation was made according to the viscosity measurement results. The results show that large spherical aggregates formed in the mixed solution, which tend to transfer into branched and wormlike mixed micelles with the increases of the salt concentration. The viscosity of the mixed solution was found to increase gradually corresponding to the change of the catanionic surfactant mixtures' morphology.     

Sugar-derived tricatenar catanionic surfactant: synthesis, self-assembly properties, and hydrophilic probe encapsulation by vesicles

A new sugar-derived tricatenar catanionic surfactant (TriCat) was developed to obtain stable vesicles that could be exploited for drug encapsulation. The presence of the sugar moiety led to the formation of highly hydrophilic stoichiometric catanionic surfactant systems. The three hydrophobic chains permitted vesicles to form spontaneously. The self-assembly properties (morphology, size, and stability) of TriCat were examined in water and in buffer solution. Encapsulation studies of a hydrophilic probe, arbutin, commonly used in cosmetics for its whitening properties, were performed to check the impermeability of the vesicle bilayer. The enhancement of hydrophobic forces by the three chains of TriCat prevented surfactant equilibrium between the bilayer and the solution and enabled the probe to be retained in the aqueous cavity of the vesicles for at least 30 h. Thus, the present study suggests that this tricatenar catanionic surfactant could be a promising delivery system for hydrophilic drugs.     

Free‐Standing CoO‐POM Janus‐like Ultrathin Nanosheets

A single‐step solution‐based strategy is used to obtain 2D Janus‐like free‐standing ultrathin nanosheets build from two structurally unrelated species, that is, polyoxomolybdate (POM) and CoO. A controlled 2D‐to‐1D morphological transition was achieved by judiciously adjusting the solvent choice. These POM‐CoO heterostructures can behave as an ideal catalyst for the epoxidation of styrene. Benefiting from their amphiphilic nature, these 2D POM‐CoO nanosheets have also been used as surfactant to emulsify immiscible solvents. It is anticipated that structurally diverse polyoxometalates will offer promise as design elements for variety of structurally and compositionally tunable van der Waals integrated heteromaterials having a broad range applications.