Electrochemically Enabled,Nickel‐Catalyzed Amination

Along with amide bond formation, Suzuki cross‐coupling, and reductive amination, the Buchwald–Hartwig–Ullmann‐type amination of aryl halides stands as one of the most employed reactions in modern medicinal chemistry. The work herein demonstrates the potential of utilizing electrochemistry to provide a complementary avenue to access such critical bonds using an inexpensive nickel catalyst under mild reaction conditions. Of note is the scalability, functional‐group tolerance, rapid rate, and the ability to employ a variety of aryl donors (Ar−Cl, Ar−Br, Ar−I, Ar−OTf), amine types (primary and secondary), and even alternative X−H donors (alcohols and amides).     

Nickel‐Catalyzed Amination of Aryl Chlorides with Ammonia or Ammonium Salts

The nickel‐catalyzed amination of aryl chlorides to form primary arylamines occurs with ammonia or ammonium sulfate and a well‐defined single‐component nickel(0) precatalyst containing a Josiphos ligand and an η²‐bound benzonitrile ligand. This system also catalyzes the coupling of aryl chlorides with gaseous amines in the form of their hydrochloride salts.     

Nickel‐Catalyzed Monoarylation of Ammonia

Structurally diverse (hetero)aryl chloride, bromide, and tosylate electrophiles were employed in the Ni‐catalyzed monoarylation of ammonia, including chemoselective transformations. The employed JosiPhos/[Ni(cod)₂] catalyst system enables the use of commercially available stock solutions of ammonia, or the use of ammonia gas in these reactions, thereby demonstrating the versatility and potential scalability of the reported protocol. Proof‐of‐principle experiments established that air‐stable [(JosiPhos)NiCl₂] precatalysts can be employed successfully in such transformations.     

PhPAd‐DalPhos: Ligand‐Enabled,Nickel‐Catalyzed Cross‐Coupling of (Hetero)aryl Electrophiles with Bulky Primary Alkylamines

The base metal‐catalyzed C?N cross‐coupling of bulky α,α,α‐trisubstituted primary alkylamines with (hetero)aryl electrophiles represents a challenging and under‐developed class of transformations that is of significant potential utility, including in the synthesis of lipophilic active pharmaceutical ingredients. Herein, we report that a new, air‐stable Ni(II) pre‐catalyst incorporating the optimized ancillary ligand PhPAd‐DalPhos enables such transformations of (hetero)aryl chloride, bromide, and tosylate electrophiles to be carried out for the first time with substrate scope rivalling that achieved using state‐of‐the‐art Pd catalysts, including room temperature cross‐couplings of (hetero)aryl chlorides that are unprecedented for any catalyst (Pd, Ni, or other).     

Nickel‐Catalyzed Cross‐Coupling of Sulfonamides With (Hetero)aryl Chlorides

The development of Ni‐catalyzed C?N cross‐couplings of sulfonamides with (hetero)aryl chlorides is reported. These transformations, which were previously achievable only with Pd catalysis, are enabled by use of air‐stable ( L )NiCl(o‐tol) pre‐catalysts (L= PhPAd‐DalPhos and PAd2‐DalPhos ), without photocatalysis. The collective scope of (pseudo)halide electrophiles (X=Cl, Br, I, OTs, and OC(O)NEt₂) demonstrated herein is unprecedented for any reported catalyst system for sulfonamide C?N cross‐coupling (Pd, Cu, Ni, or other). Preliminary competition experiments and relevant coordination chemistry studies are also presented.     

Nickel‐Catalyzed Amination of Silyloxyarenes through C–O Bond Activation

Silyloxyarenes were utilized as electrophilic coupling partners with amines in the synthesis of aniline derivatives. A diverse range of amine substrates were used, including cyclic or acyclic secondary amines, secondary anilines, and sterically hindered primary anilines. Additionally, a range of sterically hindered and unhindered primary aliphatic amines were employed, which have previously been challenging with other classes of aryl ether electrophiles. Orthogonal couplings of silyloxyarenes with aryl methyl ethers are illustrated, where selectivity between the two C?O electrophiles is determined by ligand control, thereby allowing complementary and selective late‐stage diversification of either electrophile. Finally, a sequential coupling displays the utility of this amination method along with the reversal in intrinsic reactivity between aryl methyl ethers and silyloxyarenes.     

Nickel‐Catalyzed Electrochemical Reductive Relay Cross‐Coupling of Alkyl Halides to Aryl Halides

A highly regioselective Ni‐catalyzed electrochemical reductive relay cross‐coupling between an aryl halide and an alkyl halide has been developed in an undivided cell. Various functional groups are tolerated under these mild reaction conditions, which provides an alternative approach for the synthesis of 1,1‐diarylalkanes.     

Nickel‐Catalyzed Enantioselective Reductive Amination of Ketones with Both Arylamines and Benzhydrazide

An asymmetric reductive amination of ketones using both arylamines and benzhydrazide in the presence of nickel catalysts was developed. A one‐pot synthesis of tetrahydroquinoxalines was also developed starting directly from α‐ketoaldehydes and 1,2‐diaminobenzene. Formic acid was used as a safe and economic surrogate for high‐pressure hydrogen gas. Strongly σ‐donating bis(alkylphosphine)s are crucial ancillary ligands for both stereoselective hydride insertion and decarboxylation of the formate.     

Ligand‐Enabled Nickel‐Catalyzed Redox‐Relay Migratory Hydroarylation of Alkenes with Arylborons

A redox‐relay migratory hydroarylation of isomeric mixtures of olefins with arylboronic acids catalyzed by nickel complexes bearing diamine ligands is described. A range of structurally diverse 1,1‐diarylalkanes, including those containing a 1,1‐diarylated quaternary carbon, were obtained in excellent yields and with high regioselectivity. Preliminary experimental evidence supports the proposed non‐dissociated chainwalking of aryl‐nickel(II)‐hydride species along the alkyl chain of alkenes before selective reductive elimination at a benzylic position. A catalyst loading as low as 0.5 mol % proved to be sufficient in large‐scale synthesis while retaining high reactivity, highlighting the practical value of this transformation.     

Nickel‐Catalyzed Esterification of Aliphatic Amides

Recent studies have demonstrated that amides can be used in nickel‐catalyzed reactions that lead to cleavage of the amide C?N bond, with formation of a C?C or C?heteroatom bond. However, the general scope of these methodologies has been restricted to amides where the carbonyl is directly attached to an arene or heteroarene. We now report the nickel‐catalyzed esterification of amides derived from aliphatic carboxylic acids. The transformation requires only a slight excess of the alcohol nucleophile and is tolerant of heterocycles, substrates with epimerizable stereocenters, and sterically congested coupling partners. Moreover, a series of amide competition experiments establish selectivity principles that will aid future synthetic design. These studies overcome a critical limitation of current Ni‐catalyzed amide couplings and are expected to further stimulate the use of amides as synthetic building blocks in C?N bond cleavage processes.     

Nickel‐Catalyzed Arylation,Alkenylation, and Alkynylation of Unprotected Thioglycosides at Room Temperature

Unprotected thioglycosides were effective nucleophiles for Ni⁰‐catalyzed C? S bond‐forming reaction with functionalized (hetero)aryl, alkenyl, and alkynyl halides. The functional‐group tolerance on the electrophilic partner was typically high and the anomeric selectivities of the thioglycosides were high in all cases. The efficiency of this general procedure was well‐demonstrated by the synthesis of 4‐methyl‐7‐thioumbelliferyl‐β‐D ‐cellobioside (MUS‐CB).     

Integrating Allyl Electrophiles into Nickel‐Catalyzed Conjunctive Cross‐Coupling

Allylation and conjunctive cross‐coupling represent two useful, yet largely distinct, reactivity paradigms in catalysis. The union of these two processes would offer exciting possibilities in organic synthesis but remains largely unknown. Herein, we report the use of allyl electrophiles in nickel‐catalyzed conjunctive cross‐coupling with a non‐conjugated alkene and dimethylzinc. The transformation is enabled by weakly coordinating, monodentate aza‐heterocycle directing groups that are useful building blocks in synthesis, including saccharin, pyridones, pyrazoles, and triazoles. The reaction occurs under mild conditions and is compatible with a wide range of allyl electrophiles. High chemoselectivity through substrate directivity is demonstrated by the facile reactivity of the β‐γ alkene of the starting material, whereas the ?‐ζ alkene of the product is preserved. The generality of this approach is further illustrated through the development of an analogous method with alkyne substrates. Mechanistic studies reveal the importance of the dissociation of the weakly coordinating directing group to allow the allyl moiety to bind and facilitate C(sp³)?C(sp³) reductive elimination.     

Ni‐Catalyzed Amination Reactions: An Overview

Nitrogen‐containing organic compounds are valuable in many fields of science and industry. The most reliable method for the construction of C(sp²)–N bonds is undoubtedly palladium‐catalyzed amination. In spite of the great achievements made in this area, the use of expensive Pd‐based catalysts constitutes an important limitation for large‐scale applications. Since nickel is the least expensive and most abundant among the group 10 metals, the interest in Ni‐based catalysts for processes typically catalyzed by palladium has grown considerably over the last few years. Herein, we revise the development of Ni‐catalyzed amination reactions, emphasizing the most relevant and recent advances in the field.     

Nickel‐Catalyzed Methylation of Aryl Halides with Deuterated Methyl Iodide

A nickel‐catalyzed methylation of aryl halides with cheap and readily available CH₃I or CD₃I is described. The reaction is applicable to a wide range of substrates and allows installation of a CD₃ group under mild reaction conditions without deuterium scrambling to other carbon atoms. Initial mechanistic studies on the stoichiometric and catalytic reactions of the isolated [(dppp)Ni(C₆H₄‐4‐CO₂Et)Br] [dppp=1,3‐bis(diphenylphosphanyl)propane] suggest that a Ni⁰/Ni^II catalytic cycle is favored.     

Cobalt‐Catalyzed Electrophilic Amination of Aryl‐ and Heteroarylzinc Pivalates with N‐Hydroxylamine Benzoates

Aryl‐ and heteroarylzinc pivalates can be aminated with O‐benzoylhydroxylamines at 25 °C within 2–4 h in the presence of 2.5–5.0 % CoCl₂?2 LiCl to furnish the corresponding tertiary arylated or heteroarylated amines in good yields. This electrophilic amination also provides access to diarylamines and aryl(heteroaryl)amines. A new tuberculosis drug candidate (Q203) was prepared in six steps and 56 % overall yield by using this cobalt‐catalyzed amination as the key step.     

Nickel‐Catalyzed Amide Bond Formation from Methyl Esters

Despite being one of the most important and frequently run chemical reactions, the synthesis of amide bonds is accomplished primarily by wasteful methods that proceed by stoichiometric activation of one of the starting materials. We report a nickel‐catalyzed procedure that can enable diverse amides to be synthesized from abundant methyl ester starting materials, producing only volatile alcohol as a stoichiometric waste product. In contrast to acid‐ and base‐mediated amidations, the reaction is proposed to proceed by a neutral cross coupling‐type mechanism, opening up new opportunities for direct, efficient, chemoselective synthesis.     

Nickel‐Catalyzed Cross‐Electrophile Coupling with Organic Reductants in Non‐Amide Solvents

Cross‐electrophile coupling of aryl halides with alkyl halides has thus far been primarily conducted with stoichiometric metallic reductants in amide solvents. This report demonstrates that the use of tetrakis(dimethylamino)ethylene (TDAE) as an organic reductant enables the use of non‐amide solvents, such as acetonitrile or propylene oxide, for the coupling of benzyl chlorides and alkyl iodides with aryl halides. Furthermore, these conditions work for several electron‐poor heterocycles that are easily reduced by manganese. Finally, we demonstrate that TDAE addition can be used as a control element to ‘hold’ a reaction without diminishing yield or catalyst activity.     

Nickel‐Catalyzed Chain‐Walking Cross‐Electrophile Coupling of Alkyl and Aryl Halides and Olefin Hydroarylation Enabled by Electrochemical Reduction

The first electrochemical approach for nickel‐catalyzed cross‐electrophile coupling was developed. This method provides a novel route to 1,1‐diarylalkane derivatives from simple and readily available alkyl and aryl halides in good yields and excellent regioselectivity under mild conditions. The procedure shows good tolerance for a broad variety of functional groups and both primary and secondary alkyl halides can be used. Furthermore, the reaction was successfully scaled up to the multigram scale, thus indicating potential for industrial application. Mechanistic investigation suggested the formation of a nickel hydride in the electroreductive chain‐walking arylation, which led to the development of a new nickel‐catalyzed hydroarylation of styrenes to provide a series of 1,1‐diaryl alkanes in good yields under mild reaction conditions.