Addition of S‐Heterocyclic Carbenes to Fullerenes: Formation and Characterization of Dithiomethano‐Bridged Derivatives

The reactions of novel S‐heterocyclic carbenes (SHCs), which were prepared by the cycloaddition of disilenes and digermenes to CS₂, with C₆₀ and Sc₃N@I_h‐C₈₀ afforded the corresponding methano‐bridged fullerenes. The [6,6]‐closed and [6,6]‐open structures were characterized for the SHC adducts of C₆₀ and Sc₃N@I_h‐C₈₀, respectively. These derivatives exhibited relatively low oxidation potentials, indicative of the electron‐donating effects of the SHC addends. The electronic properties of the SHC derivatives were clarified by the density functional theory calculations.     

Synthesis and Electrochemical Studies of Bingel–Hirsch Derivatives of M3N@Ih‐C80 (M=Sc,Lu)

Bingel–Hirsch derivatives of the trimetallic nitride template endohedral metallofullerenes (TNT‐EMFs) Sc₃N@I_h‐C₈₀ and Lu₃N@I_h‐C₈₀ were prepared by reacting these compounds with 2‐bromodiethyl malonate, 2‐bromo‐1,3‐dipyrrolidin‐1‐ylpropane‐1,3‐dionate bromide, and 9‐bromo fluorene. The mono‐adducts were isolated and their ¹H NMR spectra showed that the addition occurred with high regioselectivity at the [6,6] bonds of the I_h‐C₈₀ fullerene cage. Electrochemical analysis showed that the reductive electrochemistry behavior of these derivatives is irreversible at a scan rate of 100 mV s^?1, which is comparable to the behavior of the pristine fullerene species. The first reduction potential of each derivative is either cathodically or anodically shifted by a different value, depending on the attached addend. Bis‐adducts containing EtOOC‐C‐COOEt and HC‐COOEt addends were isolated by HPLC and in the case of Sc₃N@I_h‐C₈₀ the first reduction potential exhibits a larger shift towards negative potentials when compared to the mono‐adduct. This observation is important for designing acceptor materials for the construction of bulk heterojunction (BHJ) organic solar cells, since the polyfunctionalization not only increases the solubility of the fullerene species but also offers a promising approach for bringing the LUMO energy levels closer for the donor and the acceptor materials.     

New Trifluoromethylated Derivatives of Metal Nitride Clusterfullerenes: Sc3N@Ih‐C80(CF3)14 and Sc3N@D5h‐C80(CF3)16

Trifluoromethylated derivatives of Sc₃N@I_h‐C₈₀ and Sc₃N@D_5h‐C₈₀ were synthesized by the reaction with CF₃I at 440 °C. HPLC separation of the mixture of Sc₃N@D_5h‐C₈₀(CF₃)_n derivatives resulted in isolation and X‐ray structure determination of Sc₃N@D_5h‐C₈₀(CF₃)₁₆, which represents a precursor of the known Sc₃N@D_5h‐C₈₀(CF₃)₁₈. Among the CF₃ derivatives of Sc₃N@I_h‐C₈₀, two new isomers of Sc₃N@I_h‐C₈₀(CF₃)₁₄ ( Sc‐14‐VI and Sc‐14‐VII ) were isolated by HPLC, and their molecular structures were determined by X‐ray diffraction, thus enabling a comprehensive comparison of altogether seven isomers. Two types of addition patterns with different orientations of the Sc₃N cluster relative to the I_h‐C₈₀ fullerene cage were established. In particular, Sc‐14‐VII represents a direct precursor of the known Sc₃N@I_h‐C₈₀(CF₃)₁₆‐ II . All molecular structures exhibit an ordered position of a Sc₃N cluster inside the fullerene C₈₀ cage.     

Crystallographic Evidence for Direct Metal–Metal Bonding in a Stable Open‐Shell La2@Ih‐C80 Derivative

Endohedral metallofullerenes (EMFs) have novel structures and properties that are closely associated with the internal metallic species. Benzyl radical additions have been previously shown to form closed‐shell adducts by attaching an odd number of addends to open‐shell EMFs (such as Sc₃C₂@I_h‐C₈₀) whereas an even number of groups are added to closed‐shell EMFs (for example Sc₃N@I_h‐C₈₀). Herein we report that benzyl radical addition to the closed‐shell La₂@I_h‐C₈₀ forms a stable, open‐shell monoadduct instead of the anticipated closed‐shell bisadduct. Single‐crystal X‐ray diffraction results show the formation of a stable radical species. In this species, the La?La distance is comparable to the theoretical value of a La?La covalent bond and is shorter than reported values for other La₂@I_h‐C₈₀ derivatives, providing unambiguous evidence for the formation of direct La?La bond.     

Preparation,Structural Determination,and Characterization of Electronic Properties of Bis‐silylated and Bis‐germylated Lu3N@Ih‐C80

Bis‐silylated and bis‐germylated derivatives of Lu₃N@I_h‐C₈₀ ( 3 , 4 , 5 ) were successfully synthesized by the photochemical addition of disiliranes 1 a , 1 b or digermirane 2 , and fully characterized by spectroscopic, electrochemical, and theoretical studies. Interestingly, digermirane 2 reacts more efficiently than disiliranes 1 a and 1 b because of its good electron‐donor properties and lower steric hindrance around the Ge?Ge bond. The 1,4‐adduct structures of 3 , 4 , 5 were unequivocally established by single‐crystal X‐ray crystallographic analyses. The electrochemical and theoretical studies reveal that the energy gaps between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of the 1,4‐adducts are remarkably smaller than those of Lu₃N@I_h‐C₈₀, because the electron‐donating groups effectively raise the HOMO levels. It is also observed that germyl groups are slightly more electron‐donating than the silyl groups on the basis of the redox properties and the HOMO–LUMO energies of 4 and 5 . Bis‐silylation and bis‐germylation are effective and versatile methods for tuning the electronic characteristics of endohedral metallofullerenes.     

An Efficient Method to Separate Sc3N@C80 Ih and D5h Isomers and Sc3N@C78 by Selective Oxidation with Acetylferrocenium [Fe(COCH3C5H4)Cp]+

Based on the different oxidation potentials of endohedral fullerenes Sc₃N@C₈₀ I_h and D_5h and Sc₃N@C₇₈, an efficient and useful method that avoids HPLC has been developed for their separation. Selective chemical oxidation of the Sc₃N@D_5h‐C₈₀ isomer and Sc₃N@C₇₈ by using an acetylferrocenium salt [Fe(COCH₃C₅H₄)Cp]⁺ followed by column chromatographic separation and reduction with CH₃SNa resulted in the isolation of pure Sc₃N@I_h‐C₈₀, Sc₃N@C₇₈, and a mixture of Sc₃N@D_5h‐C₈₀ and Sc₃N@C₆₈.     

Molecular Structure and Magnetic and Optical Properties of Endometallonitridofullerene Sc3N@Ih-C80 in Neutral,Radical Anion,and Dimeric Anionic Forms

A series of compounds with Sc₃N@I_h-C₈₀ in the neutral, monomeric, and dimeric anion states have been prepared in the crystalline form and their molecular structures and optical and magnetic properties have been studied. The neutral Sc₃N@I_h-C₈₀ ⋅ 3 C₆H₄Cl₂ ( 1 ) and (Sc₃N@I_h-C₈₀)₃(TPC)₂ ⋅ 5 C₆H₄Cl₂ ( 2 , TPC=triptycene) compounds both crystallized in a high-symmetry trigonal structure. The reduction of Sc₃N@I_h-C₈₀ to the radical anion resulted in dimerization to form diamagnetic singly bonded (Sc₃N@I_h-C₈₀⁻)₂ dimers. In contrast to {[2.2.2]cryptand(Na⁺)}₂(Sc₃N@I_h-C₈₀⁻)₂ ⋅ 2.5 C₆H₄Cl₂ ( 3 ) with strongly disordered components, we synthesized new dimeric phases {[2.2.2]cryptand- (K⁺)}₂(Sc₃N@I_h-C₈₀⁻)₂ ⋅ 2 C₆H₄Cl₂ ( 4 ) and {[2.2.2]cryptand- (Cs⁺)}₂(Sc₃N@I_h-C₈₀⁻)₂ ⋅ 2 C₆H₄Cl₂ ( 5 ) in which only one major dimer orientation was found. The thermal stability of the (Sc₃N@I_h-C₈₀⁻)₂ dimers was studied by EPR analysis of 3 to show their dissociation in the 400–460 K range producing monomeric Sc₃N@I_h-C₈₀^.− radical anions. This species shows an EPR signal with a hyperfine splitting of 5.8 mT. The energy of the intercage C−C bond was estimated to be 234±7 kJ mol⁻¹, the highest value among negatively charged fullerene dimers. The EPR spectra of crystalline (Bu₃MeP⁺)₃(Sc₃N@I_h-C₈₀^.−)₃ ⋅ C₆H₄Cl₂ ( 6 ) are presented for the first time. The salt shows an asymmetric EPR signal, which could be fitted by three lines. Two lines were attributed to Sc₃N@I_h-C₈₀^.−. Hyperfine splitting is manifested above 180 K due to the hyperfine interaction of the electron spin with the three scandium atoms (a total of 22 lines with an average splitting of 5.32 mT are observed at 220 K). Furthermore, each of the 22 lines is additionally split into six lines with an average separation of 0.82 mT. The large splitting indicates intrinsic charge and spin density transfer from the fullerene cage to the Sc₃N cluster. Both the monomeric and dimeric Sc₃N@I_h-C₈₀⁻ anions show an intrinsic shift of the IR bands attributed to the Sc₃N cluster and new bands corresponding to these species appear in the NIR range of their UV/Vis/NIR spectra, which allows these anions to be distinguished from neutral species.     

Chemical Reactions of Cationic Metallofullerenes: An Alternative Route for Exohedral Functionalization

The chemistry of cationic forms of clusterfullerenes remain less explored than that of the corresponding neutral or anionic species. In the present work, M₃N@I_h-C₈₀ (M=Sc or Lu) cations were generated by both electrochemical and chemical oxidation methods. The as-obtained cations successfully underwent the typical Bingel–Hirsch reaction that fails with neutral Sc₃N@I_h-C₈₀. Two isomeric Sc₃N@I_h-C₈₀ cation derivatives, [5,6]-open and [6,6]-open adducts, were synthesized, and the former has never been prepared by means of a Bingel–Hirsch reaction with neutral clusterfullerenes. In the case of the Lu₃N@I_h-C₈₀ cation, however, only a [6,6]-open adduct was obtained. Density functional theory (DFT) calculations indicated that the oxidized M₃N@I_h-C₈₀ was much more reactive than the neutral compound upon addition of the diethyl bromomalonate anion. The Bingel–Hirsch reaction of M₃N@I_h-C₈₀ cations occurred by means of an unusual outer-sphere single-electron transfer (SET) process from the diethyl bromomalonate anion to the stable intermediate [M₃N@C₈₀(C₂H₅COO)₂CBr]^.. Remarkably, the diethyl bromomalonate anion was found to act as both a nucleophile and an electron donor.     

Full Exploration of the Diels–Alder Cycloaddition on Metallofullerenes M3N@C80 (M=Sc,Lu, Gd): The D5h versus Ih Isomer and the Influence of the Metal Cluster

In this work a detailed investigation of the exohedral reactivity of the most important and abundant endohedral metallofullerene (EMF) is provided, that is, Sc₃N@I_h‐C₈₀ and its D_5h counterpart Sc₃N@D_5h‐C₈₀, and the (bio)chemically relevant lutetium‐ and gadolinium‐based M₃N@I_h/D_5h‐C₈₀ EMFs (M=Sc, Lu, Gd). In particular, we analyze the thermodynamics and kinetics of the Diels–Alder cycloaddition of s‐cis‐1,3‐butadiene on all the different bonds of the I_h‐C₈₀ and D_5h‐C₈₀ cages and their endohedral derivatives. First, we discuss the thermodynamic and kinetic aspects of the cycloaddition reaction on the hollow fullerenes and the two isomers of Sc₃N@C₈₀. Afterwards, the effect of the nature of the metal nitride is analyzed in detail. In general, our BP86/TZP//BP86/DZP calculations indicate that [5,6] bonds are more reactive than [6,6] bonds for the two isomers. The [5,6] bond D _5h ‐b , which is the most similar to the unique [5,6] bond type in the icosahedral cage, I _h ‐a , is the most reactive bond in M₃N@D_5h‐C₈₀ regardless of M. Sc₃N@C₈₀ and Lu₃N@C₈₀ give similar results; the regioselectivity is, however, significantly reduced for the larger and more electropositive M=Gd, as previously found in similar metallofullerenes. Calculations also show that the D_5h isomer is more reactive from the kinetic point of view than the I_h one in all cases which is in good agreement with experiments.     

Singly Bonded Monoadduct rather than Methanofullerene: Manipulating the Addition Pattern of Trimetallic Nitride Clusterfullerene through One Endohedral Metal Atom Substitution

Bingel–Hirsch reactions of trimetallic nitride clusterfullerenes (NCFs) generally yield methanofullerene (cyclopropane) adducts instead of singly bonded derivatives, which have been reported for monometallofullerenes. Herein, we report the synthesis and characterization of the Bingel–Hirsch derivative of a mixed metal nitride clusterfullerene (MMNCF) TiY₂N@I_h‐C₈₀. Surprisingly, in contrast to the reported Bingel–Hirsch cyclopropane adducts of the analogous NCF Y₃N@I_h‐C₈₀, the Bingel–Hirsch derivative of TiY₂N@I_h‐C₈₀ is the first singly bonded monoadduct (labeled as TiY₂N@C₈₀‐Mono) to be reported, which was determined unambiguously by single‐crystal X‐ray crystallography. Besides, the reactivity of TiY₂N@I_h‐C₈₀ was found to be significantly improved relative to that of Y₃N@I_h‐C₈₀. Upon substituting one endohedral yttrium (Y) atom of Y₃N@I_h‐C₈₀ with titanium (Ti), the Bingel–Hirsch derivative changes from the cyclopropane to the singly bonded monoadduct, revealing that not only the reactivity but also the addition pattern of NCFs can be manipulated simultaneously through one endohedral metal atom substitution.     

Blending Non‐Group‐3 Transition Metal and Rare‐Earth Metal into a C80 Fullerene Cage with D5h Symmetry

Rare‐earth metals have been mostly entrapped into fullerene cages to form endohedral clusterfullerenes, whereas non‐Group‐3 transition metals that can form clusterfullerenes are limited to titanium (Ti) and vanadium (V), and both are exclusively entrapped within an I_h‐C₈₀ cage. Non‐Group‐3 transition‐metal‐containing endohedral fullerenes based on a C₈₀ cage with D_5h symmetry, V_xSc_3?xN@D_5h‐C₈₀ (x=1, 2), have now been synthesized, which exhibit two variable cluster compositions. The molecular structure of VSc₂N@D_5h‐C₈₀ was unambiguously determined by X‐ray crystallography. According to a comparative study with the reported Ti‐ and V‐containing clusterfullerenes based on a I_h‐C₈₀ cage and the analogous D_5h‐C₈₀‐based metal nitride clusterfullerenes containing rare‐earth metals only, the decisive role of the non‐Group‐3 transition metal on the formation of the corresponding D_5h‐C₈₀‐based clusterfullerenes is unraveled.     

Bingel–Hirsch Addition on Endohedral Metallofullerenes: Kinetic Versus Thermodynamic Control

An extensive theoretical study of the Bingel–Hirsch addition of bromomalonate on scandium nitride endohedral fullerenes has been carried out. The prototypical and highly symmetrical Sc₃N@I_h‐C₈₀, with a structure that satisfies the isolated pentagon rule (IPR), and the non‐IPR Sc₃N@D₃(6140)‐C₆₈ fullerene show analogous reaction paths despite the distinct topology of the carbon networks and different rotation freedom of the internal nitride cluster. For the two metallofullerenes, our results predict that the reaction takes place under kinetic control yielding open‐cage fulleroids on [6,6] bonds, which is in good agreement with experimental data. The theoretical studies also show that predicting the reactivity of endohedral metallofullerenes is not straightforward and often an accurate analysis of the potential energy surface is required.     

Synthesis and Isolation of the Titanium–Scandium Endohedral Fullerenes—Sc2TiC@Ih‐C80, Sc2TiC@D5h‐C80 and Sc2TiC2@Ih‐C80: Metal Size Tuning of the TiIV/TiIII Redox Potentials

The formation of endohedral metallofullerenes (EMFs) in an electric arc is reported for the mixed‐metal Sc–Ti system utilizing methane as a reactive gas. Comparison of these results with those from the Sc/CH₄ and Ti/CH₄ systems as well as syntheses without methane revealed a strong mutual influence of all key components on the product distribution. Whereas a methane atmosphere alone suppresses the formation of empty cage fullerenes, the Ti/CH₄ system forms mainly empty cage fullerenes. In contrast, the main fullerene products in the Sc/CH₄ system are Sc₄C₂@C₈₀ (the most abundant EMF from this synthesis), Sc₃C₂@C₈₀, isomers of Sc₂C₂@C₈₂, and the family Sc₂C_{2 n} (2 n=74, 76, 82, 86, 90, etc.), as well as Sc₃CH@C₈₀. The Sc–Ti/CH₄ system produces the mixed‐metal Sc₂TiC@C_{2 n} (2 n=68, 78, 80) and Sc₂TiC₂@C_{2 n} (2 n=80) clusterfullerene families. The molecular structures of the new, transition‐metal‐containing endohedral fullerenes, Sc₂TiC@I_h‐C₈₀, Sc₂TiC@D_5h‐C₈₀, and Sc₂TiC₂@I_h‐C₈₀, were characterized by NMR spectroscopy. The structure of Sc₂TiC@I_h‐C₈₀ was also determined by single‐crystal X‐ray diffraction, which demonstrated the presence of a short Ti=C double bond. Both Sc₂TiC‐ and Sc₂TiC₂‐containing clusterfullerenes have Ti‐localized LUMOs. Encapsulation of the redox‐active Ti ion inside the fullerene cage enables analysis of the cluster–cage strain in the endohedral fullerenes through electrochemical measurements.     

Two Regioisomers of Endohedral Pyrrolidinodimetallofullerenes M2@Ih‐C80(CH2)2NTrt (M=La,Ce; Trt=trityl): Control of Metal Atom Positions by Addition Positions

The two regioisomers of endohedral pyrrolidinodimetallofullerenes M₂@I_h‐C₈₀(CH₂)₂NTrt (M=La, Ce; Trt=trityl) were synthesized, isolated, and characterized. X‐ray crystallographic analyses of [6,6]‐La₂@I_h‐C₈₀(CH₂)₂NTrt and [6,6]‐Ce₂@I_h‐C₈₀(CH₂)₂NTrt revealed that the encapsulated metal atoms are located at the slantwise positions on the mirror plane that parallels the pyrrolidine ring. Paramagnetic NMR analyses of [6,6]‐ and [5,6]‐Ce₂@I_h‐C₈₀(CH₂)₂NTrt were also carried out to clarify the metal positions. As for the [6,6]‐adduct, the metal positions obtained by paramagnetic NMR analysis agree well with the X‐ray structure. In contrast, paramagnetic NMR analysis of the [5,6]‐adduct showed that the two Ce atoms are collinear with the pyrrolidine ring. We also compared the observed paramagnetic effects of the pyrrolidinodimetallofullerenes with those of other cerium‐encapsulating fullerene derivatives such as bis‐silylated Ce₂@I_h‐C₈₀ and a carbene adduct of Ce₂@I_h‐C₈₀. We found that the metal positions can be explained by the electrostatic potential maps of the corresponding [6,6]‐ and [5,6]‐adducts of [I_h‐C₈₀(CH₂)₂NTrt]^6?. These findings clearly show that metal positions inside fullerene cages can be controlled by means of the addition positions of the addends. In addition, the radical anions of the pyrrolidinodimetallofullerenes were prepared by bulk controlled‐potential electrolysis and characterized by X‐band EPR spectral study.     

A Complete Guide on the Influence of Metal Clusters in the Diels–Alder Regioselectivity of Ih‐C80 Endohedral Metallofullerenes

The chemical functionalization of endohedral metallofullerenes (EMFs) has aroused considerable interest due to the possibility of synthesizing new species with potential applications in materials science and medicine. Experimental and theoretical studies on the reactivity of endohedral metallofullerenes are scarce. To improve our understanding of the endohedral metallofullerene reactivity, we have systematically studied with DFT methods the Diels–Alder cycloaddition between s‐cis‐1,3‐butadiene and practically all X@I_h‐C₈₀ EMFs synthesized to date: X=Sc₃N, Lu₃N, Y₃N, La₂, Y₃, Sc₃C₂, Sc₄C₂, Sc₃CH, Sc₃NC, Sc₄O₂ and Sc₄O₃. We have studied both the thermodynamic and kinetic regioselectivity, taking into account the free rotation of the metallic cluster inside the fullerene. This systematic study has been made possible through the use of the frozen cage model (FCM), a computationally cheap approach to accurately predicting the exohedral regioselectivity of cycloaddition reactions in EMFs. Our results show that the EMFs are less reactive than the hollow I_h‐C₈₀ cage. Except for the Y₃ cluster, the additions occur predominantly at the [5,6] bond. In many cases, however, a mixture of the two possible regioisomers is predicted. In general, [6,6] addition is favored in EMFs that have a larger charge transfer from the metal cluster to the cage or a voluminous metal cluster inside. The present guide represents the first complete and exhaustive investigation of the reactivity of I_h‐C₈₀‐based EMFs.     

Regioselective `One‐Pot' Synthesis of Antipodal Bis‐adducts by Heating of Solid [5,6]Fullerene‐C60‐Ih and Anthracenes,Preliminary Communication

Antipodal (`trans‐1') Diels‐Alder bis‐adducts 3 and 7 – 9 of [5,6]fullerene‐C₆₀‐I_h ( 1 ) with some anthracenes were prepared highly regioselectively by heating mixtures of the solid 1 and anthracene or of (one of) three alkyl‐substituted anthracenes in the absence of solvents (Scheme 2). Other bis‐cycloadducts were not detected, but lesser amounts of mono‐cycloadducts 2 and 4 – 6 , respectively, were also formed. Heating of solvent‐free mixtures of 1 and three other alkyl‐substituted anthracenes did not result in a detectable amount of (antipodal) bis‐cycloadducts. The antipodal bis‐adduct 7 of 1 and of 1‐methylanthracene was analyzed by X‐ray crystallography. The preparative outcome of heating of anthracenes and solid 1 parallels the result of the heating of the corresponding crystalline mono‐adducts of anthracenes and 1 . Both approaches reveal a remarkably consistent dependence of the reaction upon the presence and position of alkyl substituents at the anthracene unit. The regioselective assembly of antipodal bis‐adducts from anthracene(s) and 1 cannot be rationalized by their (inherent molecular) stability, but it indicates the crucial control of the lattice.     

The Regioselectivity of Bingel–Hirsch Cycloadditions on Isolated Pentagon Rule Endohedral Metallofullerenes

In this work, the Bingel–Hirsch addition of diethylbromomalonate to all non‐equivalent bonds of Sc₃N@D_3h‐C₇₈ was studied using density functional theory calculations. The regioselectivities observed computationally allowed the proposal of a set of rules, the predictive aromaticity criteria (PAC), to identify the most reactive bonds of a given endohedral metallofullerene based on a simple evaluation of the cage structure. The predictions based on the PAC are fully confirmed by both the computational and experimental exploration of the Bingel–Hirsch reaction of Sc₃N@D_5h‐C_80, thus indicating that these rules are rather general and applicable to other isolated pentagon rule endohedral metallofullerenes.     

Essential Factors for Control of the Equilibrium in the Reversible Rearrangement of M3N@Ih‐C80 Fulleropyrrolidines: Exohedral Functional Groups versus Endohedral Metal Clusters

The effects of exohedral moieties and endohedral metal clusters on the isomerization of M₃N@I_h‐C₈₀ products from the Prato reaction through [1,5]‐sigmatropic rearrangement were systematically investigated by using three types of fulleropyrrolidine derivatives and four different endohedral metal clusters. As a result, all types of derivatives provided the same ratios of the isomers for a given trimetallic nitride template (TNT) as the thermodynamic products, thus indicating that the size of the endohedral metal clusters inside C₈₀ was the single essential factor in determining the equilibrium between the [6,6]‐isomer (kinetic product) and the [5,6]‐isomer. In all the derivatives, the [6,6]‐ and [5,6]‐Prato adducts with larger metal clusters, such as Y₃N and Gd₃N, were equally stable, which is in good agreement with DFT calculations. The reaction rate of the rearrangement was dependent on both the substituent of exohedral functional groups and the endohedral metal‐cluster size. Further DFT calculations and ¹³C NMR spectroscopic studies were employed to rationalize the equilibrium in the rearrangement between the [6,6]‐ and [5,6]‐fulleropyrrolidines.     

Isolation of CeLu2N@Ih‐C80 through a Non‐Chromatographic,Two‐Step Chemical Process and Crystallographic Characterization of the Pyramidalized CeLu2N within the Icosahedral Cage

By combining two chemical methods of purification, 4 mg of purified CeLu₂N@C₈₀ was readily isolated from 500 mg of carbon soot extract without the use of recycling HPLC, a method which has previously been necessary to obtain pure samples of endohedral fullerenes. In stage 1, CeLu₂N@C₈₀ was selectively precipitated by virtue of its low first oxidation potential (+0.01 V) and the judicious choice of MgCl₂ as the Lewis acid precipitant. For stage 2, we used a stir and filter approach (SAFA), which employed the electron‐rich NH₂ groups immobilized on silica gel to selectively bind residual endohedrals and higher cage fullerenes that were contaminants from stage 1. Crystallographic analysis of CeLu₂N@C₈₀ in the co‐crystal CeLu₂N@I_h‐C₈₀ ? Ni(octaethylporphyrin) ? 2(toluene) reveals that the I_h‐C₈₀ cage is present with a pyramidalized CeLu₂N unit inside.     

[6,6]‐Open and [6,6]‐Closed Isomers of C70(CF2): Synthesis,Electrochemical and Quantum Chemical Investigation

Novel difluoromethylenated [70]fullerene derivatives, C₇₀(CF₂)_n (n=1–3), were obtained by the reaction of C₇₀ with sodium difluorochloroacetate. Two major products, isomeric C₇₀(CF₂) mono‐adducts with [6,6]‐open and [6,6]‐closed configurations, were isolated and their homofullerene and methanofullerene structures were reliably determined by a variety of methods that included X‐ray analysis and high‐level spectroscopic techniques. The [6,6]‐open isomer of C₇₀(CF₂) constitutes the first homofullerene example of a non‐hetero [70]fullerene derivative in which functionalisation involves the most reactive bond in the polar region of the cage. Voltammetric estimation of the electron affinity of the C₇₀(CF₂) isomers showed that it is substantially higher for the [6,6]‐open isomer (the 70‐electron π‐conjugated system is retained) than the [6,6]‐closed form, the latter being similar to the electron affinity of pristine C₇₀. In situ ESR spectroelectrochemical investigation of the C₇₀(CF₂) radical anions and DFT calculations of the hyperfine coupling constants provide evidence for the first example of an inter‐conversion between the [6,6]‐closed and [6,6]‐open forms of a cage‐modified fullerene driven by an electrochemical one‐electron transfer. Thus, [6,6]‐closed C₇₀(CF₂) constitutes an interesting example of a redox‐switchable fullerene derivative.