Cyclic Tetramers of Zinc Chlorophylls as a Coupled Light‐Harvesting Antenna–Charge‐Separation System

A coupled light‐harvesting antenna–charge‐separation system, consisting of self‐assembled zinc chlorophyll derivatives that incorporate an electron‐accepting unit, is reported. The cyclic tetramers that incorporated an electron acceptor were constructed by the co‐assembly of a pyridine‐appended zinc chlorophyll derivative, ZnPy , and a zinc chlorophyll derivative further decorated with a fullerene unit, ZnPyC₆₀ . Comprehensive steady‐state and time‐resolved spectroscopic studies were conducted for the individual tetramers of ZnPy and ZnPyC₆₀ as well as their co‐tetramers. Intra‐assembly singlet energy transfer was confirmed by singlet–singlet annihilation in the ZnPy tetramer. Electron transfer from the singlet chlorin unit to the fullerene unit was clearly demonstrated by the transient absorption of the fullerene radical anion in the ZnPyC₆₀ tetramer. Finally, with the co‐tetramer, a coupled light‐harvesting and charge‐separation system with practically 100 % quantum efficiency was demonstrated.     

Tuning the Electronic Nature of Mono‐Bay Alkynyl–Phenyl‐Substituted Perylene Bisimides: Synthesis,Structure, and Photophysical Properties

Perylene bisimide (PBI) derivatives with various alkynyl–phenyl substituents at a single bay position have been synthesised by Sonogashira coupling. NMR spectroscopic studies reveal the unsymmetric nature of the dyads. All of the dyads undergo two reversible reductions, which demonstrates their structural and electrochemical rigidity. The synthesised dyads show a remarkable redshift in their absorption maxima and sharp vibronic progression. Electron‐rich substituents facilitate efficient charge transfer from the substituent HOMO to the electron‐deficient PBI core. The most interesting spectral signatures were exhibited by a PBI with a strongly electron‐donating ethynyl(dimethylaminophenyl) substituent. The steady‐state features of this PBI showed a broad absorption that covered almost the whole visible region with no emission. A twisted intramolecular charge‐transfer (TICT) process, related to the rotational motion of ethynyl(dimethylaminophenyl) PBI, was also demonstrated. Computational investigations shed light on the coplanarity of the various substituents with respect to the PBI core; the PBI core itself remains flat without any noticeable deformation even after mono‐functionalisation. This illustrates that mono‐functionalisation exerts meagre steric hindrance on the bay positions relative to disubstituted analogues. Despite several previous reports on the structural characterisation of 1,7‐disubstituted PBI derivatives, we present the first structural characterisation of a mono‐bay ethynyl‐phenyl substituted PBI. The solid‐state structure of the phenyl derivative has a flat PBI core without any noticeable steric constraints from the substituents, as predicted. In contrast, single‐crystal X‐ray analysis for the mono‐bromo bay‐substituted PBI shows that the bromine substituent is not in the plane of the PBI core.     

Artificial Iono‐ and Photosensitive Membranes Based on an Amphiphilic Aza‐Crown‐Substituted Hemicyanine

Artificial iono‐ and photosensitive membranes based on an amphiphilic aza‐crown‐substituted hemicyanine are assembled on liquid and solid supports and their aggregation behaviour, which is influenced by the binding of metal cations and surface density, is studied. The photoinduced charge‐transfer properties of an analogous non‐amphiphilic hemicyanine in solution are also demonstrated. An asymmetric sandwich dimer model is proposed and existence of such dimers in solution is evidenced by transient absorption and fluorescence anisotropy experiments. Changes in absorption and emission spectra, as well as compression isotherms of the amphiphile observed in the presence of cations, are discussed in terms of 2D molecular reorganisation. Surface‐pressure‐controlled reversible excimer formation at the air–water interphase and excimer‐type emission of Langmuir–Blodgett films in the presence of cations are demonstrated and are discussed on the basis of fibre‐optic fluorimetry and fluorescence microscopy results.     

Charge Transfer Induces Formation of Stimuli‐Responsive,Chiral, Cohesive Vesicles‐on‐a‐String that Eventually Turn into a Hydrogel

A charge transfer (CT) mediated two‐component, multistimuli responsive supergelation involving a L ‐histidine‐appended pyrenyl derivative (PyHisOMe) as a donor and an asymmetric bolaamphiphilic naphthalene‐diimide (Asym‐NDI) derivative as an acceptor in a 2:1 mixture of H₂O/MeOH was investigated. Asym‐NDI alone self‐assembled into pH‐responsive vesicular nanostructures in water. Excellent selectivity in CT gel formation was achieved in terms of choosing amino acid appended pyrenyl donor scaffolds. Circular dichroism and morphological studies suggested formation of chiral, interconnected vesicular assemblies resembling “pearls‐on‐a‐string” from these CT mixed stacks. XRD studies revealed the formation of monolayer lipid membranes from these CT mixed stacks that eventually led to the formation of individual vesicles. Strong cohesive forces among the interconnected vesicles originate from the protrusion of the oxyethylene chains from the surfaces of the chiral vesicles.     

Cross‐β Amyloid Nanohybrids Loaded With Cytochrome C Exhibit Superactivity in Organic Solvents

The present study reports the development of a unique class of Cytochrome C (CytC)‐loaded cross‐beta amyloid nanohybrids. The peroxidase activity of the bound CytC increased up to two orders of magnitude in organic solvents compared to the activity of unbound CytC in water. The amyloid sequences used in the study feature the nucleating core ¹⁷LVFF²¹ of the beta amyloid (Aβ), which assembled to form homogenous fibers and nanotubes. The morphology and exposed surface of the amyloid nanohydrids critically modulated the CytC activity. A CytC–Ac‐KLVFFAE‐NH₂ hybrid featuring nanofiber morphology showed 308‐fold higher activity than unbound CytC in water, which increased to 450‐fold with the nanotube morphology of CytC–Ac‐KLVFFA L ‐NH₂. Notably, activity declined substantially when the exposed surface charge was detuned by replacing lysine with histidine, thus underpinning the importance of surface charge. This enzyme–amyloid nanohybrid system could facilitate the technological application of enzymes.     

Photoconductive Core–Shell Liquid‐Crystals of a Perylene Bisimide J‐Aggregate Donor–Acceptor Dyad

A novel core–shell structured columnar liquid crystal composed of a donor‐acceptor dyad of tetraphenoxy perylene bisimide (PBI), decorated with four bithiophene units on the periphery, was synthesized. This molecule self‐assembles in solution into helical J‐aggregates guided by π–π interactions and hydrogen bonds which organize into a liquid‐crystalline (LC) columnar hexagonal domain in the solid state. Donor and acceptor moieties exhibit contrasting exciton coupling behavior with the PBIs’ (J‐type) transition dipole moment parallel and the bithiophene side arms’ (H‐type) perpendicular to the columnar axis. The dyad shows efficient energy and electron transfer in solution as well as in the solid state. The synergy of photoinduced electron transfer (PET) and charge transport along the narcissistically self‐assembled core–shell structure enables the implementation of the dye in two‐contact photoconductivity devices giving rise to a 20‐fold increased photoresponse compared to a reference dye without bithiophene donor moieties.     

Electronic Coupling between Two Amine Redox Sites through the 5,5′‐Positions of Metal‐Chelating 2,2′‐Bipyridines

Electron delocalization of new mixed‐valent (MV) systems with the aid of lateral metal chelation is reported. 2,2′‐Bipyridine (bpy) derivatives with one or two appended di‐p‐anisylamino groups on the 5,5′‐positions and a coordinated [Ru(bpy)₂] (bpy=2,2′‐bipyridine), [Re(CO)₃Cl], or [Ir(ppy)₂] (ppy=2‐phenylpyridine) component were prepared. The single‐crystal molecular structure of the bis‐amine ligand without metal chelation is presented. The electronic properties of these complexes were studied and compared by electrochemical and spectroscopic techniques and DFT/TDDFT calculations. Compounds with two di‐p‐anisylamino groups were oxidized by a chemical or electrochemical method and monitored by near‐infrared (NIR) absorption spectral changes. Marcus–Hush analysis of the resulting intervalence charge‐transfer transitions indicated that electron coupling of these mixed‐valent systems is enhanced by metal chelation and that the iridium complex has the largest coupling. TDDFT calculations were employed to interpret the NIR transitions of these MV systems.     

Light‐driven and aggregation‐induced emission from side‐chain azoindazole polymers

The well‐defined azoindazole‐containing homopolymer, poly(6‐{6‐[(4‐dimethylamino) phenylazo]‐indazole}‐hexyl methacrylate) (PDHMA), and amphiphilic diblock copolymer, poly({6‐[6‐(4‐dimethylamino)phenylazo]‐indazole}‐hexyl methacrylate)‐b‐poly(2‐(dimethylamino)ethylmethacrylate) (PDHMA_m‐b‐PDMAEMA_n), were successfully prepared via reversible addition‐fragmentation chain transfer polymerization technique. The homopolymer and amphiphilic diblock copolymer in CH₂Cl₂ exhibited intense fluorescence emission accompanied by trans–cis photoisomerization of azoindazole group under UV irradiation. The experiment results indicated that the intense fluorescence emission may be attributed to an inhibition of photoinduced electron transfer of the cis form of azoindazole. On the other hand, the intense fluorescence emission of amphiphilic diblock copolymers in water‐tetrahydrofuran mixture was observed, which increased with the volume ratio of water in the mixed solvent. The self‐aggregation behaviors of three amphiphilic diblock copolymers were examined by transmission electron microscopy, laser light scattering, and UV–vis spectra. The restriction of intramolecular rotation of the azoindazole groups in aggregates was considered as the main cause of aggregation‐induced fluorescence emission. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Perylene Bisimide and Naphthyl‐Based Molecular Dyads: Hydrogen Bonds Driving Co‐planarization and Anomalous Temperature‐Response Fluorescence

The origin of the positive temperature effect in fluorescence emission of a newly designed perylene bisimide (PBI) derivative with two naphthyl units containing ortho‐methoxy group (NM) at its bay positions (PBI‐2NM) was elucidated. A key point is the finding of a weak hydrogen bond (<5.0 kcal mol^?1) between the methoxy group of the NM unit and a nearby hydrogen atom of the PBI core. It is the bonding that drives co‐planarization of the different aromatic units, resulting in delocalization of the π‐electrons of the compound as synthesized, inducing fluorescence quenching via intramolecular charge transfer (ICT). With increasing temperature, the co‐planar structure could be distorted in part, resulting in a decreased degree of ICT, and hence leading to enhanced fluorescence emission. The unique positive temperature effect in emission induced by H‐bond‐driven co‐planarization may pave a new avenue in designing functional molecular systems complementary to conventional methods.     

Synthesis,characterization, and properties of tunable thermosensitive amphiphilic dendrimer‐star copolymers with Y‐shaped arms

Novel and well‐defined amphiphilic dendrimer‐star copolymer poly(ε‐caprolactone)‐block‐(poly(2‐(2‐methoxyethoxy)ethylmethacrylate‐co‐oligo(ethylene glycol) methacrylate))₂ with Y‐shaped arms were synthesized by the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The investigation of thermal properties and the analysis of crystalline morphology indicate that the high‐branched structure of dendrimer‐star copolymers with Y‐shaped arms and the presence of amorphous P(MEO₂MA‐co‐OEGMA) segments together led to the complete destruction of crystallinity of the PCL segments in the dendrimer‐star copolymer. In addition, the hydrophilicity–hydrophobicity transition of the dendrimer‐star copolymer film can be achieved by altering the external temperatures. The amphiphilic copolymers can self‐assemble into spherical nanomicelles in water. Because the lower critical solution temperature of the copolymers can be adjusted by varying the ratio of MEO₂MA and OEGMA, the tunable thermosensitive properties can be observed by transmittance, dynamic laser light scattering, and transmission electron microscopy (TEM). The release rate of model drug chlorambucil from the micelles can be effectively controlled by changing the external temperatures, which indicates that these unique high‐branched amphiphilic copolymers have the potential applications in biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Formation of CdS nanoclusters in phase‐separated poly(2‐hydroxyethyl methacrylate)‐l‐polyisobutylene amphiphilic conetworks

Nanophase‐separated poly(2‐hydroxyethyl methacrylate)‐l‐polyisobutylene (PHEMA‐l‐PIB) amphiphilic conetworks were obtained by crosslinking α,ω‐bismethacrylate‐terminated polyisobutylene (PIB) via copolymerization with silylated 2‐hydroxyethyl methacylate, followed by the hydrolysis of the silylether groups. Morphology development of a sample containing 64% PIB was monitored by means of transmission electron microscopy (TEM), atomic force microscopy (AFM), and small‐angle X‐ray scattering. For comparison, the morphology of a sample containing 53% PIB was investigated by AFM. The dry conetworks exhibited hydrophilic and hydrophobic phases with average 8–10‐nm domain sizes and were swellable in water as well as in heptane. Swelling amphiphilic conetworks with aqueous cadmium–chloride solution followed by exposure to H₂S resulted in nanosized CdS clusters located in the amphiphilic conetworks, that is, for the first time, new inorganic–organic hybrid materials composed of CdS semiconducting nanocrystals and PHEMA‐l‐PIB amphiphilic conetworks were prepared. © 2001 John Wiley & Sons, Inc. J Polym Sci B Part B: Polym Phys 39: 1429–1436, 2001     

Folding‐Induced Modulation of Excited‐State Dynamics in an Oligophenylene–Ethynylene‐Tethered Spiral Perylene Bisimide Aggregate

The excited‐state photophysical behavior of a spiral perylene bisimide (PBI) folda‐octamer ( F8 ) tethered to an oligophenylene–ethynylene scaffold is comprehensively investigated. Solvent‐dependent UV/Vis and fluorescence studies reveal that the degree of folding in this foldamer is extremely sensitive to the solvent, thus giving rise to an extended conformation in CHCl₃ and a folded helical aggregate in methylcyclohexane (MCH). The exciton‐deactivation dynamics are largely governed by the supramolecular structure of F8 . Femtosecond transient absorption (TA) in the near‐infrared region indicates a photoinduced electron‐transfer process from the backbone to the PBI core in the extended conformation, whereas excitation power‐ and polarization‐dependent TA measurements combined with computational modeling showed that excitation energy transfer between the unit PBI chromophores is the major deactivation pathway in the folded counterpart.     

Tracking Structural Evolution during Symmetry‐Breaking Charge Separation in Quadrupolar Perylene Bisimide with Time‐Resolved Impulsive Stimulated Raman Spectroscopy

Elucidating structural roles in photoinduced charge transfer is indispensable, as nuclear rearrangements are simultaneously usually involved in the dynamics. However, it is hard to evaluate whether the structural changes occur or not by using conventional time‐resolved electronic spectroscopy. Here, time‐resolved impulsive stimulated Raman spectroscopy is applied to record the evolution of vibrational snapshots during charge‐separation dynamics of donor–acceptor–donor‐type quadrupolar perylene bisimide in real time. Drastic frequency shifts were observed for several Raman bands with their population kinetics, thus symmetry‐breaking charge separation accompanies significant structural changes, as supported by (TD)‐DFT calculations. A comparison between time‐resolved Raman spectra of the neutral S₁ state and the radical anion species shows that the spectral signatures, especially in high‐frequency regions, provide important clues to bond length alternation patterns in the PBI core.     

Investigation on thermoresponsive behavior of biodegradable poly(γ‐glutamic acid)‐graft‐L‐phenylalanine ethyl ester

The thermosensitivity of biodegradable and non‐toxic amphiphilic polymer derived from a naturally occurring polypeptide and a derivative of amino acid was first reported. The amphiphilic polymer consisted of poly(γ‐glutamic acid) (γ‐PGA) as a hydrophilic backbone, and L ‐phenylalanine ethyl ester (L ‐PAE) as a hydrophobic branch. Poly(γ‐glutamic acid)‐graft‐L ‐phenylalanine (γ‐PGA‐graft‐L ‐PAE) with grafting degrees of 7–49% were prepared by varying the content of a water‐soluble carbodiimide (WSC). γ‐PGA‐graft‐L ‐PAE with a grafting degree of 49% exhibited thermoresponsive phase transition behavior in an aqueous solution at around 80°C. The copolymers with grafting degrees in the range of 30–49% showed thermoresponsive properties in NaCl solution. A clouding temperature (T_cloud) could be adjusted by changing the polymer concentration and/or NaCl concentration. The thermoresponsive behavior was reversible. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and properties of novel functional polymers from tetrachlorinated perylene bisimide

Asymmetric tetrachlorinated perylene‐3,4,9,10‐tetracarboxylic acid bisimides (4Cl‐PBI) were prepared in one‐pot by a reaction of tetrachlorinated perylene‐3,4,9,10‐tetracarboxylic acid dianhydride with a mixture of 2‐aminoethanol and dodecanamine or 2‐decyltetradecan‐1‐amine. Then, two 4Cl‐PBI methacrylates bearing one (M1) and two (M2) long alkyl tails were prepared, and a series of functional homopolymers were obtained by subjecting conventional radical polymerization and atom transfer radical polymerization. Furthermore, amphiphilic block copolymers pendent with 4Cl‐PBI units, PEO‐PM1 and PEO‐PM2, were prepared using monomethoxyl PEO bromoisobutyrate as a macroinitiator. Size exclusion chromatography, UV–vis spectroscopy, fluorescence spectroscopy, and cyclic voltammetry have been applied to characterize the polymers obtained. Moreover, the Ullmann reactions between the grafted 4Cl‐PBI units were conducted to form large π units, and the PEO‐PM2 block copolymers gave di‐ or tri‐PBI units in about 30%. Also, self‐assembly of the amphiphilic block copolymers PEO‐PM1 and PEO‐PM2 in water was applied to generate spherical nanoparticles of 4Cl‐PBI. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Ferrocenyl amphiphilic Janus dendrimers as redox‐responsive micellar carriers

Amphiphilic Janus dendrimers have attracted increasing attention due to their asymmetric structures and various functional properties compared to the conventional symmetric macromolecules. Herein, a novel ferrocenyl‐terminated amphiphilic Janus dendrimer containing nine hydrophilic triethylene glycol branches was synthesized by two synthetic routes, namely the typical chemo selective coupling method and the mixed modular approach. Chemical redox triggers, namely Fe₂(SO₄)₃ as oxidant and ascorbic acid as reductant, could regulate the self‐assembly behavior of the Janus dendrimer in water through the redox‐switching between ferrocene and ferricinium cations, and the change of micelles formed were investigated and confirmed through scanning electron microscopy and dynamic light scattering. The cargo‐loading property of the micelles self‐assembled by the Janus dendrimer was further proved by the successful fabrication of Rhodamine B (RhB)‐loaded micelles, and the oxidation‐triggered release behavior of the encapsulated RhB could be mediated by changing the concentration of oxidants. This work provides an effective approach to prepare ferrocenyl‐terminated amphiphilic Janus dendrimers and the self‐assembled micelles might be used as a promising molecular carrier in areas such as drug delivery and catalysis.     

3,14‐Bis(p‐nitrophenyl)‐17,17‐dipentyltetrabenzo[a,c,g,i]‐fluorene: A New Fluorophore Displaying Both Remarkable Solvatochromism and Crystalline‐Induced Emission

A series of 17,17‐dialkyl‐3,14‐diaryltetrabenzofluorenes were efficiently prepared by using Suzuki–Miyaura cross‐coupling reactions of the corresponding 3,14‐dibromo derivatives. Studies of the unique fluorescence properties of these compounds showed that they display intense blue to yellow fluorescence with high quantum yields in the solution state and blue to orange fluorescence with moderate quantum yields in the solid state. In addition, the fluorescence wavelength of the bis(p‐nitrophenyl) derivative is remarkably solvent‐dependent in a manner that correlates with the solvent polarity parameter E_T(30). The results of density function theory calculations suggest that the intramolecular charge‐transfer character of the HOMO–LUMO transition is responsible for the large solvent effect. Moreover, addition of water to a tetrahydrofuran (THF) solution of this compound leads to quenching of the yellow fluorescence owing to an increase in the solvent polarity. However, when the amount of water fraction exceeds 70 %, a new fluorescence band appears at the same orange‐red emission wavelength as that of the solid‐state fluorescence. This observation suggests the occurrence of a crystallization‐induced emission (CIE) phenomenon in highly aqueous THF.     

Block copolymer nanoparticles of controlled sizes via ring‐opening metathesis polymerization

This article describes the formation and characterization of self‐assembled nanoparticles of controlled sizes based on amphiphilic block copolymers synthesized by ring‐opening metathesis polymerization. We synthesized a novel hydrophobic derivative of norbornene; this monomer could be polymerized using Grubbs' catalyst [Cl₂Ru(CHPh)(PCy₃)₂] forming polymers of controlled molecular weight. We synthesized amphiphilic block copolymers of controlled composition and showed that they assemble into nanoparticles of controlled size. The nanoparticles were characterized using dynamic light scattering and transmission electron microscopy. Tuning the composition of the block copolymer enables the tuning of the diameters of the nanoparticles in the 30‐ to 80‐nm range. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3352–3359, 2004     

“Two‐Point” Self‐Assembly and Photoinduced Electron Transfer in meso‐Donor‐Carrying Bis(styryl crown ether)‐BODIPY–Bis(alkylammonium)fullerene Donor–Acceptor Conjugates

BF₂‐chelated dipyrromethene, BODIPY, was functionalized to carry two styryl crown ether tails and a secondary electron donor at the meso position. By using a “two‐point” self‐assembly strategy, a bis‐alkylammonium‐functionalized fullerene (C₆₀) was allowed to self‐assemble the crown ether voids of BODIPY to obtain multimodular donor–acceptor conjugates. As a consequence of the two‐point binding, the 1:1 stoichiometric complexes formed yielded complexes of higher stability in which fluorescence of BODIPY was found to be quenched; this suggested the occurrence of excited‐state processes. The geometry and electronic structure of the self‐assembled complexes were derived from B3LYP/3‐21G(*) methods in which no steric constraints between the entities was observed. An energy‐level diagram was established by using spectral, electrochemical, and computational results to help understand the mechanistic details of excited‐state processes originating from ¹bis‐styryl‐BODIPY*. Femtosecond transient absorbance studies were indicative of the formation of an exciplex state prior to the charge‐separation process to yield a bis‐styryl‐BODIPY ^{. +}–C₆₀ ^{. −} radical ion pair. The time constants for charge separation were generally lower than charge‐recombination processes. The present studies bring out the importance of multimode binding strategies to obtain stable self‐assembled donor–acceptor conjugates capable of undergoing photoinduced charge separation needed in artificial photosynthetic applications.     

Amino‐Acid‐Based Block Copolymers by RAFT Polymerization

This review summarizes recent advances in the design and synthesis of amino‐acid‐based block copolymers by reversible addition–fragmentation chain transfer (RAFT) polymerization of amino‐acid‐bearing monomers. We will mainly focus on stimuli‐responsive block copolymers, such as pH‐, thermo‐, and dual‐stimuli‐responsive block copolymers, and self‐assembled block copolymers, including amphiphilic and double‐hydrophilic block copolymers having tunable chiroptical properties. We will also highlight recent results in RAFT synthesis of amino‐acid‐based copolymers having various properties, such as catalytic and optoelectronic properties, cross‐linked block copolymer micelles, unimolecular micelles, and organic–inorganic hybrids.