A Versatile Approach towards the Compaction,Decompaction, and Immobilization of DNA at Interfaces by Using Cyclodextrins

We investigate the temperature dependence of interactions of β‐cyclodextrin (CD)/hexadecyltrimethylammonium bromide (CTAB) self‐assemblies with DNA during the decompaction of DNA/CTAB complexes. By combining direct imaging techniques with density and sound‐velocity measurements, we can explain the decompaction process and suggest a suitable model. The DNA‐decompaction process by using CDs is accompanied by interactions with surfaces, such as glass or mica. The mechanism of β‐CD/CTAB self‐assembly is elucidated and the immobilization of DNA onto negatively charged surfaces is explained. Differences between the fractal dimensions of DNA that is adsorbed onto the surfaces are related to strong and weak binding, which permit the partial relaxation of DNA on the surfaces. The β‐CD/CTAB self‐assembled monolayers are demonstrated to be a facile and efficient route for surface functionalization, which allows for the immobilization of biomacromolecules in close proximity without any intermediate binding or deprotection steps. Moreover, this route is expected to show several advantages that might contribute to improving the performance of future biosensors as gentle immobilization‐limiting alteration of the protein structure, oriented immobilization, thereby allowing homogeneous accessibility, reversible immobilization, thereby allowing reutilizations, and high compatibility with various types of biomacromolecules.     

Controllable Assembly and Separation of Colloidal Nanoparticles through a One‐Tube Synthesis Based on Density Gradient Centrifugation

Self‐assembly of gold nanoparticles into one‐dimensional (1D) nanostructures with finite primary units was achieved by introducing a thin salt (NaCl) solution layer into density gradient before centrifugation. The electrostatic interactions between Au nanoparticles would be affected and cause 1D assembly upon passing through the salt layer. A negatively charged polymer such as poly(acrylic acid) was used as an encapsulation/stabilization layer to help the formation of 1D Au assemblies, which were subsequently sorted according to unit numbers at succeeding separation zones. A centrifugal field was introduced as the external field to overcome the random Brownian motion of NPs and benefit the assembly effect. Such a facile “one‐tube synthesis” approach couples assembly and separation in one centrifuge tube by centrifuging once. The method can be tuned by changing the concentration of interference salt layer, encapsulation layer, and centrifugation rate. Furthermore, positively charged fluorescent polymers such as perylenediimide‐poly(N,N‐diethylaminoethyl methacrylate) could encapsulate the assemblies to give tunable fluorescence properties.     

Reversible assembly and disassembly of gold nanorods induced by EDTA and its application in SERS tuning

A facile and reversible method for assembling and disassembling gold nanorods (GNRs) using a common chelating agent, ethylenediaminetetraacetic acid (EDTA), is reported. Assembly was induced by the electrostatic interaction between the cetyltrimethylammonium bromide (CTAB) bilayer present on GNRs and EDTA. At lower concentrations of EDTA, end-to-end assembled chains were formed. At higher concentrations of EDTA, these chains come together to form sheet-like structures. The complex of CTAB and EDTA, being labile, disassembles in the presence of stronger chelating agents. Upon addition of metal ions having higher formation constants, EDTA detaches from the GNRs and forms stronger complexes with metal ions, resulting in disassembly. Characteristic changes were observed in the UV/vis spectra. Addition of EDTA resulted in a red shift of longitudinal surface plasmon (LSP) resonance at lower concentrations, indicating an end-to-end assembly. At higher concentrations, the characteristic of side-by-side assembly was seen in the UV/vis spectra. TEM analysis proved the existence of end-to-end chains at lower concentrations of EDTA and side-by-side assembled sheet-like structures at higher concentrations. The addition of metal ions induced disassembly. Even 2 ppb of metal ion was detected using the spectral changes. Disassembly was studied in detail, taking Pb(II) as the model system. Upon addition of Pb(II), TSP showed a blue shift and decreased in intensity while the LSP showed a red shift and increased in intensity. A new peak at a higher wavelength region emerged, pointing to the existence of both side-by-side and end-to-end assembly in the system. TEM analysis showed that the disassembly involves the formation of bundled chains which may be the reason for the observed spectral changes. Surface-enhanced Raman scattering (SERS) activity of the system could be tuned by controlling the concentration of EDTA and the metal ion, Pb(II).     

环糊精与表面活性剂主客体作用诱导的金纳米棒可控自组装

The self-assembly of colloidal nanocrystals has emerged as a powerful strategy for the bottom-up fabrication of functional materials and nanodevices. Recently, the self-assembly of gold nanorods (GNRs) has attracted significant attention because of their unique plasmonic properties, but the realization of their adjustable self-assembly of GNRs through facile and effective approaches remains challenging. In this work, the controllable self-assembly of GNRs in aqueous solution was realized through the host-guest interactions of cyclodextrins (CDs) and the cetyltrimethylammonium bromide (CTAB) molecules adsorbed on the surface of the GNRs. The self-assembly of GNRs was readily achieved by the addition of aqueous α-CD solutions with varied concentrations into aqueous dispersions of CTAB-stabilized GNRs. At a relatively low α-CD concentration, slow aggregation of the GNRs occurred, resulting in their side-by-side assembly. This was revealed by the blue shift of the longitudinal surface plasmon resonance (LSPR) band in the absorption spectra and confirmed by transmission electron microscopy (TEM) observations. On the other hand, when a higher concentration of α-CD was added, fast aggregation of the GNRs occurred, resulting in their end-to-end assembly. This was revealed by the red shift in the LSPR band together with the TEM observations. If β-CD was employed instead of α-CD, the self-assembly of GNRs could also be induced, although a relatively higher concentration of β-CD was required to achieve the extent of aggregation similar to that induced by α-CD, indicating that the supramolecular host–guest interaction between CDs and the surfactant CTAB was crucial to the directed self-assembly of GNRs. Furthermore, the α-CD-induced assembly was inhibited on addition of excess CTAB, confirming that the supramolecular interaction of α-CD and CTAB played a key role in directing the self-assembly of the GNRs. Based on these experimental results, a possible mechanism for the α-CD-induced self-assembly of GNRs was proposed as follows: at a lower α-CD concentration, the gradual formation of the host-guest inclusion complex α-CD/CTAB led to the partial replacement of the highly charged CTAB bilayers adsorbed on the GNRs by the less charged complex, which resulted in a slow side-by-side assembly of the GNRs; at a higher α-CD concentration, the CTAB bilayers were quickly replaced by the α-CD/CTAB complex, and the CTAB molecules adsorbed at both ends of the GNRs were almost completely replaced, resulting in a fast end-to-end assembly of the GNRs. Additionally, on the basis of the hydrolysis of α-cyclodextrin catalyzed by α-amylase, the self-assembly of GNRs directed by the host-guest interaction could be used to realize the feasible detection of α-amylase in solutions. This self-assembly strategy mediated by the host-guest interaction may be extendable to other colloidal systems involving surfactants adsorbed on the surface of nanoparticles, and may open new avenues for the controllable self-assembly of non-spherical nanoparticles.     

Luminescence Resonance Energy Transfer Sensors Based on the Assemblies of Oppositely Charged Lanthanide/Gold Nanoparticles in Aqueous Solution

This work demonstrates luminescence resonance energy transfer (LRET) sensors based on lanthanide‐doped nanoparticles as donors (D) and gold nanoparticles as acceptors (A), combined through electrostatic interactions between the oppositely charged nanoparticles. Negatively charged lanthanide‐doped nanoparticles, YVO₄:Eu and LaPO₄:Ce,Tb, with high luminescence quantum yield and good water‐solubility, are synthesized through a polymer‐assisted hydrothermal method. Positively charged polyhedral and spherical gold nanoparticles exhibit surface plasmon resonance (SPR) bands centered at 623 and 535 nm, respectively. These bands overlap well with the emission of the Eu³⁺ and Tb³⁺ ions within the lanthanide nanoparticles. Herein, the gold nanoparticles are synthesized through a seed‐mediated cetyltrimethylammonium bromide (CTAB)‐assisted method. The assemblies of the oppositely charged donors and acceptors are developed into LRET‐based sensors exhibiting a donor quenching efficiency close to 100 %.     

Electrostatic‐Assembly of Carbon Nanotubes (CNTs) and Polymer Particles in Water: a Facile Approach to Improve the Dispersion of CNTs in Thermoplastics

Summary: A facile and organic‐solvent‐free method for preparing thermoprocessable multiwalled carbon nanotube (MWCNT)‐filled thermoplastics is presented. MWCNTs are oxidized, neutralized, and then assembled with cationic soap‐free poly(methyl methacrylate) (PMMA) particles directly in water. The spontaneous electrostatic coupling between the negatively charged MWCNTs and positively charged PMMA particles, and the viscoelastic and thermomechanical behavior of the nanocomposites, are investigated. The electrostatic coupling interactions improve the dispersion of nanotubes and facilitate the formation of filler networks in the polymer matrix.

Preparation of nanocomposites of oxidized MWCNTs and positively charged PMMA particles through electrostatic assembly.     

Layer‐by‐Layer Assemblies of Catechol‐Functionalized TiO2 Nanoparticles and Porphyrins through Electrostatic Interactions

In the current work, we present the successful functionalization and stabilization of P‐25 TiO₂ nanoparticles by means of N1,N7‐bis(3‐(4‐tert‐butyl‐pyridium‐methyl)phenyl)‐4‐(3‐(3‐(4‐tert‐butyl‐pyridinium‐methyl)phenylamino)‐3‐oxopropyl)‐4‐(3,4‐dihydroxybenzamido)heptanediamide tribromide ( 1 ). The design of the latter is aimed at nanoparticle functionalization and stabilization with organic building blocks. On one hand, 1 features a catechol anchor to enable its covalent grafting onto the TiO₂ surface, and on the other hand, positively charged pyridine groups at its periphery to prevent TiO₂ agglomeration through electrostatic repulsion. The success of functionalization and stabilization was corroborated by thermogravimetric analysis, dynamic light‐scattering, and zeta potential measurements. As a complement to this, the formation of layer‐by‐layer assemblies, which are governed by electrostatic interactions, by alternate deposition of functionalized TiO₂ nanoparticles and two negatively charged porphyrin derivatives, that is, 5,10,15,20‐(phenoxyacetic acid)‐porphyrin ( 2 ) and 5,10,15,20‐(4‐(2‐ethoxycarbonyl)‐4‐(2‐phenoxyacetamido)heptanedioic acid)‐porphyrin ( 3 ), is documented. To this end, the layer‐by‐layer deposition is monitored by UV/Vis spectroscopy, scanning electron microscopy, ellipsometry, and profilometry techniques. The resulting assemblies are utilized for the construction and testing of novel solar cells. From stable and repeatable photocurrents generated during several “on‐off” cycles of illumination, we derive monochromatic incident photo‐to‐current conversion efficiencies of around 3 %.     

Emulsion‐Assisted Polymerization‐Induced Hierarchical Self‐Assembly of Giant Sea Urchin‐like Aggregates on a Large Scale

Hierarchical solution self‐assembly has become an important biomimetic method to prepare highly complex and multifunctional supramolecular structures. However, despite great progress, it is still highly challenging to prepare hierarchical self‐assemblies on a large scale because the self‐assembly processes are generally performed at high dilution. Now, an emulsion‐assisted polymerization‐induced self‐assembly (EAPISA) method with the advantages of in situ self‐assembly, scalable preparation, and facile functionalization was used to prepare hierarchical multiscale sea urchin‐like aggregates (SUAs). The obtained SUAs from amphiphilic alternating copolymers have a micrometer‐sized rattan ball‐like capsule (RBC) acting as the hollow core body and radiating nanotubes tens of micrometers in length as the hollow spines. They can capture model proteins effectively at an ultra‐low concentration (ca. 10 nm ) after functionalization with amino groups through click copolymerization.     

Coordinative supramolecular assembly of electrochromic thin films

The article is concerned with the layer-by-layer (LbL) assembly of electrochromic films using coordinative interactions between compounds. At first the concepts of coordinative supramolecular assembly are explained and examples are presented. Subsequently electrochromic LbL assemblies prepared upon electrostatic and/or coordinative interactions are briefly discussed. In the focus of the article are films of terpyridine(tpy)-functionalized polyiminoarylene metal ion complexes, which are prepared upon coordinative LbL assembly of the tpy-substituted polyiminoarylenes and metal ions. The films exhibit reversible electrochromic behavior with high contrast and fast response times. It is demonstrated that the electrochromic behavior of the films can be modified by a variation of polymer structure, metal ions, and counterions.     

Graphene oxide and reduced graphene oxide as novel stationary phases via electrostatic assembly for open‐tubular capillary electrochromatography

We present here the application of graphene oxide (GO) and reduced graphene oxide (GOOH) sheet as novel stationary phases for open‐tubular CEC (OTCEC) separation based on electrostatic assembly. The inner walls of a bare capillary column was first modified by ionic assembly of poly (diallyldimethylammonium chloride) (PDDA), and then negatively charged GO or GOOH was easily assembled on a positively charged interior walls of the capillary by electrostatic force. Scanning Electron Microscope images showed that GO and GOOH can still maintain sheet‐layer‐like structure when coated onto the capillary via electrostatic assembly. The chromatographic properties of the GO and GOOH coated columns were evaluated via OTCEC separations of various kinds of analytes, including three acid nitrophenol isomers, three basic nitroaniline isomers, and four neutral PAHs. Efficient separations of all the analytes were achieved with optimized buffer pH and organic additive. The reproducibility and stability of the GO or GOOH coated columns were investigated. Our results indicate the capability of application GO or GOOH sheet in OTCEC separation, which can be coated on the inner wall of fused‐silica capillary via electrostatic assembly.     

Self-assembly of gold nanorods into symmetric superlattices directed by OH-terminated hexa(ethylene glycol) alkanethiol

The self-assembly of anisotropic gold nanorods (GNRs) into ordered phases remains a challenge. Herein, we demonstrated the fabrication of symmetric circular- or semicircular-like self-assembled superlattices composed of multilayers of standing GNRs by fine-tuning the repulsive interactions among GNRs. The repulsive force is tailored from electrostatic interaction to steric force by replacing the surface coating of cetyltrimethylammonium bromide (CTAB) (ζ potential of 20-50 mV) with an OH-terminated hexa(ethylene glycol) alkanethiol (here termed as EG(6)OH, ζ potential of -10 mV). The assembly mechanism is discussed via theoretical analyses of the major interactions, and an effective balance between the repulsive steric and attractive depletion interactions is the main driving force for the self-assembly. The real-time observations of solution assembly (UV-vis-NIR absorption spectroscopy) supports the mechanism that we suggested. The superlattices obtained here not only enrich the categories of the self-assembled structures but more importantly deepen the insight of the self-assembly process and pave the way for various potential applications.     

Molecular insights into the surface morphology, layering structure, and aggregation kinetics of surfactant-stabilized graphene dispersions

The production of graphene with open band gaps for the manufacturing of graphene-based electronic and optical devices requires synthesis methods to either control the number of layers to enrich AB-stacked bilayer or trilayer graphene or control the extent of functionalization of monolayer graphene. Solution-phase dispersion of graphene is promising for both methods to create printable electronics and nanocomposites. However, both methods face common challenges, including controlling the surface morphology, reducing the turbostratic layering, and enhancing the dispersion stability. To address these challenges at the molecular level, we successfully combined molecular simulations, theoretical modeling, and experimental measurements. First, we probed the surface structure and electrostatic potential of monolayer graphene dispersed in a sodium cholate (SC) surfactant aqueous solution, which exhibits 2D sheets partially covered with a monolayer of negatively charged cholate ions. Similar to the case of carbon nanotube functionalization, one may regulate the binding affinity of charged reactants for graphene functionalization by manipulating the surface morphology. Subsequently, we quantified the interactions between two graphene-surfactant assemblies by calculating the potential of mean force (PMF) between two surfactant-covered graphene sheets, which confirmed the existence of a metastable bilayer graphene structure due to the steric hindrance of the confined surfactant molecules. The traditional Derjaguin-Landau-Verwey-Overbeek (DLVO) theory was found to be adequate to explain the long-range electrostatic repulsions between the ionic surfactant-covered graphene sheets but was unable to account for the dominant, short-range steric hindrance imparted by the confined surfactant molecules. Interestingly, one faces a dilemma when using surfactants to disperse and stabilize graphene in aqueous solution: on the one hand, surfactants can stabilize graphene aqueous dispersions, but on the other hand, they prevent the formation of new AB-stacked bilayer and trilayer graphene resulting from the reaggregation process. Finally, the lifetime and time-dependent distribution of various graphene layer types were predicted using a kinetic model of colloid aggregation, and each graphene layer type was further decomposed into subtypes, including the AB-stacked species and various turbostratic species. The kinetic model of colloid aggregation developed here can serve as a useful tool to evaluate the quality of graphene dispersions for subsequent substrate-transferring or functionalization processes.     

Spatially ordered surfactant assemblies in the gas phase: negatively charged bis(2‐ethylhexyl)sulfosuccinate‐alkaline metal ion aggregates

The formation and structural features of negatively charged aggregates of sodium bis(2‐ethylhexyl)sulfosuccinate (AOTNa) surfactant molecules in the gas phase have been investigated by electrospray ionization mass spectrometry (ESI‐MS) and density functional theory calculations. Mainly driven by the interactions of alkali metal ions both with the oxygen atoms of the sulfonate group and with the succinate moiety of the AOT^? anion, spatially ordered supramolecular assemblies, characterized by an internal core composed of surfactant counterions and hydrophilic head groups surrounded by the surfactant alkyl chains pointing outwards, are formed. Calculations have shown that surfactant self‐organization in the gas phase is energetically favoured, the energy of formation of negatively charged aggregates from isolated AOTNa and AOT^? being linearly related to the aggregation number. Information on the chelating properties of AOTNa towards clusters of inorganic salts was achieved by infusion of solutions at various AOTNa/metal salt (NaCl, NaBr, NaI, LiI, KCl, CsI, RbI) ratios in the ESI source of a mass spectrometer. A wide variety of negatively charged AOT‐metal aggregates, some of them also incorporating halide (X^?) ions, has been observed. Calculations have shown that the capture of a halide anion to give the AOTMX^? species is favoured but the energetics of the process depends on the alkali metal and halide types. The use of energy‐resolved mass spectrometry has allowed us to evaluate the stability of different complexes and to evaluate the role played by the metal ion. Overall, the present investigation supports the idea that, in the gas phase, mainly driven by electrostatic interactions, surfactant molecules are present as molecular aggregates characterized by a reverse micelle‐like organization with an internal core formed by the surfactant counterions and head groups surrounded by the surfactant alkyl chains. These peculiar aggregates are able to incorporate ionic clusters in their hydrophilic core. Copyright © 2009 John Wiley & Sons, Ltd.     

Conjugated polymer nanoparticles as fluorescence switch for selective cell imaging

Fluorescence switch plays a vital role in bioelectronics and bioimaging.Herein,we presented a new kind of facile electrostatic complex nanoparticles(ECNs)for fluorescence switching in cells and marking of individual cell.The ECNs were prepared by mixing positively charged poly(6-(2-(thiophen-3-yl)ethoxy)hexyl trimethylammonium bromide)(PT)and negatively charged diarylethene sodium salt(DAECOONa).DAE-COONa is a photoswitchable molecule which can be transformed between the ring-closed fo rm and ring-open form under the irradiation of UV or visible light.The closed-form of DAE-COONa can efficie ntly quench the fluorescence of PT through intermolecular energy transfer,while the open form of DAE-COONa does not influence the emission of PT.Thus,the fluorescence of ECNs can be modulated by light irradiation,and the ECNs with good fluorescence switching performance have been employed for fluorescence imaging and individual cell lighting up process successfully.We demonstrate that the electrostatic complex strategy provides a facile method to construct fluorescence switch fo r selective cell marking and imaging applications.     

Fluorescence Turn‐on Synthetic Lipid Rafts on Supramolecular Sheets and Hierarchical Concanavalin A Assembly

Here we report fluorescence turn‐on synthetic lipid rafts by self‐assembly of a cationic distyrylanthracene derivative on a negatively‐charged sheet in an aqueous solution. First, the negatively‐charged 2D membrane structure is formed by lateral associations of aromatic rods with carboxylate groups. Then, the synthetic rafts are floated on the surface of the negatively‐charged sheets through electrostatic interactions. The fluorescence of the synthetic rafts is turned on due to the aggregation of the positively‐charged AIE dye on the sheets, facilitating monitoring of the formation of rafts. Concanavalin A (Con A) protein can load hierarchically onto the synthetic rafts at neutral pH to provide discrete Con A aggregates with a uniform size of ≈12 nm. The uniform aggregates of Con A on the synthetic rafts can stimulate Jurkat cells with enhanced efficiency, as compared with random‐sized aggregates of Con A.     

Design of Enzyme Micelles with Controllable Concavo‐Convex Micromorphologies for Highly Enhanced Stability and Catalytical Activity

Concavo‐convex micelles with controllable sizes and nanostructures are prepared via self‐assembling polymer–enzyme (e.g., shellac enzyme) conjugates with heterogeneous polymer chains, which exhibit higher enzyme stability (300%) and bioactivity (760%) comparing with the well‐defined ones. The applied amphiphilic and negatively charged copolymer, poly (methyl methacrylate)‐block‐poly (sodium p‐styrene sulfonate), is synthesized via reversible addition–fragmentation chain transfer polymerization to modify shellac enzyme and immobilize the enzyme bioactivity inducer by covalent conjugation and electrostatic attraction, respectively. The degradation test of catechol confirms the application potential of as‐prepared micelles as an efficient and economical decontaminant.     

pH-triggered assembly of gold nanorods

The self-assembly of surfactant-protected gold nanorods (aspect ratio 3.3 +/- 0.3, 20.6 +/- 5.5 nm width, and 67.5 +/- 9.0 nm length) into ordered structures using adipic acid is presented. As made, the gold nanorods are coated with cationic surfactant, which gives them a net positive charge in aqueous solution. The pH-dependent assembly is directed by electrostatic interactions between the positively charged nanorods and negatively charged, deprotonated adipic acid. Absorption spectra and light scattering measurements of these nanorods suggest that aggregation is initiated in solution in the presence of adipic acid at pH 7-8, but not at pH 3, to form small assemblies of nanorods. Zeta potential measurements show that the assembly is significantly less positively charged in the presence of deprotonated adipic acid than when adipic acid is fully protonated.     

Measurement platforms fabricated by layer-by-layer assembly of crown ether functionalized gold nanoclusters

Mixed-ligand monolayer-protected gold nanoclusters (MPCs) with crown ether (CE) and carboxylate functionalities were synthesized and used as components of layer-by-layer (LBL) electrostatic assemblies on gold and indium tin oxide (ITO) electrodes. The purpose of using MPCs was to provide a supramolecular anchor for a functionality, CEs, of interest to sensor and solid-phase extraction design; the carboxylate provided the charged sites needed for electrostatic assembly. With 15-crown-5 as the CE, the capture of 2.8×10^-10 mol Pb^II cm^-2 per monolayer of MPC was demonstrated by voltammetry and by electrochemical quartz crystal microbalance measurements. The diffusion of ferrocene through these LBL assemblies was investigated. The presence of MPCs and/or generation-4 poly(amidoamine) dendrimers allowed facile transport of ferrocene to the underlying electrode, presumably because these supramolecular assemblies provided a quasi-porous structure.     

A new model to study the phase transition from microstructures to nanostructures in ionic/ionic surfactants mixture

The phase behavior and aggregate structures of mixtures of the oppositely charged surfactants cetyltrimethyl ammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) are explored at high dilution by pulsed field gradient stimulated echo (PFG-STE) NMR. The aggregation numbers and hydrodynamic radii of vesicles and mixed micelles were determined by a combination of viscosity and self-diffusion coefficient measurements. The average size of the mixed micelles was larger than that of micelles containing uniformly charged head groups. Analysis of the variations of the self-diffusion coefficient and viscosity with changing concentration of CTAB or SDS in the cationic-rich and anionic-rich regions revealed a phase transition from vesicles to mixed micelles. Differences in the lengths of the CTAB and SDS hydrophobic chains stabilize vesicles relative to other microstructures (e.g., liquid crystalline and precipitate phase), and vesicles form spontaneously over a wide range of compositions in both cationic-rich and anionic-rich solutions. The results obtained from conductometry measurements confirmed this transition. Finally, according to the capacitor model, a new model was developed for estimating the surface potentials and electrostatic free energy (g(elec)). Then we investigated the variations of electrostatic and transfer free energy in phase transition between mixed micelle and vesicle.     

Alternate assemblies of polyelectrolyte functionalized carbon nanotubes and platinum nanoparticles as tunable electrocatalysts for dioxygen reduction

A novel method based on electrostatic layer-by-layer self-assembly (LBL) technique for alternate assemblies of polyelectrolyte functionalized multi-walled carbon nanotubes (MWNTs) and platinum nanoparticles (PtNPs) is proposed. The shortened MWNTs can be functionalized with positively charged poly(diallyldimethylammonium chloride) (PDDA) based on electrostatic interaction. Through electrostatic layer-by-layer assembly, the positively charged PDDA functionalized MWNTs (PDWNTs) and negatively charged citrate-stabilized PtNPs were alternately assembled on a 3-mercaptopropanesulfonic sodium (MPS) modified gold electrode and also on other negatively charged surface, e.g. quartz slide and indium–tin-oxide (ITO) plate, directly forming the three-dimensional (3D) nanostructured materials. This is a very general and powerful technique for the assembling three-dimensional nanostructured materials containing carbon nanotubes (CNTs) and nanoparticles. Thus prepared multilayer films were characterized by ultraviolet–visible–near-infrared spectroscopy (UV–vis–NIR), scanning electron microscopy (SEM) and cyclic voltammetry (CV). Regular growth of the mutilayer films is monitored by UV–vis–NIR. SEM provides the morphology of the multilayer films. The PtNPs containing multilayer films exhibit high electrocatalytic activity for the reduction of dioxygen. Furthermore, the electrocatalytic activity of the films could be further tailored by simply choosing different cycles in the LBL process. This assembling method for polyelectrolyte functionalized carbon nanotubes and nanoparticles introduces new opportunities for the incorporation of various functionalities into nanotube devices, which, in turn, opens up the possibility of building more complex multicomponent nanostructures.