Electrocatalytically Active Fe‐(O‐C2)4 Single‐Atom Sites for Efficient Reduction of Nitrogen to Ammonia

Single‐atom catalysts have demonstrated their superiority over other types of catalysts for various reactions. However, the reported nitrogen reduction reaction single‐atom electrocatalysts for the nitrogen reduction reaction exclusively utilize metal–nitrogen or metal–carbon coordination configurations as catalytic active sites. Here, we report a Fe single‐atom electrocatalyst supported on low‐cost, nitrogen‐free lignocellulose‐derived carbon. The extended X‐ray absorption fine structure spectra confirm that Fe atoms are anchored to the support via the Fe‐(O‐C₂)₄ coordination configuration. Density functional theory calculations identify Fe‐(O‐C₂)₄ as the active site for the nitrogen reduction reaction. An electrode consisting of the electrocatalyst loaded on carbon cloth can afford a NH₃ yield rate and faradaic efficiency of 32.1 μg h^?1 mg_cat.^?1 (5350 μg h^?1 mg_Fe^?1) and 29.3 %, respectively. An exceptional NH₃ yield rate of 307.7 μg h^?1 mg_cat.^?1 (51 283 μg h^?1 mg_Fe^?1) with a near record faradaic efficiency of 51.0 % can be achieved with the electrocatalyst immobilized on a glassy carbon electrode.     

Single‐Atom Iron Boosts Electrochemiluminescence

The traditional luminol–H₂O₂ electrochemiluminescence (ECL) sensing platform suffers from self‐decomposition of H₂O₂ at room temperature, hampering its application for quantitative analysis. In this work, for the first time we employ iron single‐atom catalysts (Fe‐N‐C SACs) as an advanced co‐reactant accelerator to directly reduce the dissolved oxygen (O₂) to reactive oxygen species (ROS). Owing to the unique electronic structure and catalytic activity of Fe‐N‐C SACs, large amounts of ROS are efficiently produced, which then react with the luminol anion radical and significantly amplify the luminol ECL emission. Under the optimum conditions, a Fe‐N‐C SACs–luminol ECL sensor for antioxidant capacity measurement was developed with a good linear range from 0.8 μm to 1.0 mm of Trolox.     

Single‐Atom Catalyst of Platinum Supported on Titanium Nitride for Selective Electrochemical Reactions

As a catalyst, single‐atom platinum may provide an ideal structure for platinum minimization. Herein, a single‐atom catalyst of platinum supported on titanium nitride nanoparticles were successfully prepared with the aid of chlorine ligands. Unlike platinum nanoparticles, the single‐atom active sites predominantly produced hydrogen peroxide in the electrochemical oxygen reduction with the highest mass activity reported so far. The electrocatalytic oxidation of small organic molecules, such as formic acid and methanol, also exhibited unique selectivity on the single‐atom platinum catalyst. A lack of platinum ensemble sites changed the reaction pathway for the oxygen‐reduction reaction toward a two‐electron pathway and formic acid oxidation toward direct dehydrogenation, and also induced no activity for the methanol oxidation. This work demonstrates that single‐atom platinum can be an efficient electrocatalyst with high mass activity and unique selectivity.     

Cobalt Single‐Atom Catalysts with High Stability for Selective Dehydrogenation of Formic Acid

Metal–organic framework (MOF)‐derived Co‐N‐C catalysts with isolated single cobalt atoms have been synthesized and compared with cobalt nanoparticles for formic acid dehydrogenation. The atomically dispersed Co‐N‐C catalyst achieves superior activity, better acid resistance, and improved long‐term stability compared with nanoparticles synthesized by a similar route. High‐angle annular dark‐field–scanning transmission electron microscopy, X‐ray photoelectron spectroscopy, electron paramagnetic resonance, and X‐ray absorption fine structure characterizations reveal the formation of Co^IIN_x centers as active sites. The optimal low‐cost catalyst is a promising candidate for liquid H₂ generation.     

Single‐Atom Catalysts for the Electrocatalytic Reduction of Nitrogen to Ammonia under Ambient Conditions

Powered by renewable electricity, the electrochemical reduction of nitrogen to ammonia is proposed as a promising alternative to the energy‐ and capital‐intensive Haber–Bosch process, and has thus attracted much attention from the scientific community. However, this process suffers from low NH₃ yields and Faradaic efficiency. The development of more effective electrocatalysts is of vital importance for the practical applications of this reaction. Of the reported catalysts, single‐atom catalysts (SACs) show the significant advantages of efficient atom utilization and unsaturated coordination configurations, which offer great scope for optimizing their catalytic performance. Herein, progress in state‐of‐the‐art SACs applied in the electrocatalytic N₂ reduction reaction (NRR) is discussed, and the main advantages and challenges for developing more efficient electrocatalysts are also highlighted.     

Regulating the Coordination Environment of MOF‐Templated Single‐Atom Nickel Electrocatalysts for Boosting CO2 Reduction

The general synthesis and control of the coordination environment of single‐atom catalysts (SACs) remains a great challenge. Herein, a general host–guest cooperative protection strategy has been developed to construct SACs by introducing polypyrrole (PPy) into a bimetallic metal–organic framework. As an example, the introduction of Mg²⁺ in MgNi‐MOF‐74 extends the distance between adjacent Ni atoms; the PPy guests serve as N source to stabilize the isolated Ni atoms during pyrolysis. As a result, a series of single‐atom Ni catalysts (named Ni_SA‐N_x‐C) with different N coordination numbers have been fabricated by controlling the pyrolysis temperature. Significantly, the Ni_SA‐N₂‐C catalyst, with the lowest N coordination number, achieves high CO Faradaic efficiency (98 %) and turnover frequency (1622 h^?1), far superior to those of Ni_SA‐N₃‐C and Ni_SA‐N₄‐C, in electrocatalytic CO₂ reduction. Theoretical calculations reveal that the low N coordination number of single‐atom Ni sites in Ni_SA‐N₂‐C is favorable to the formation of COOH* intermediate and thus accounts for its superior activity.     

Highly Efficient CO2 Electroreduction on ZnN4‐based Single‐Atom Catalyst

The electrochemical reduction reaction of carbon dioxide (CO2RR) to carbon monoxide (CO) is the basis for the further synthesis of more complex carbon‐based fuels or attractive feedstock. Single‐atom catalysts have unique electronic and geometric structures with respect to their bulk counterparts, thus exhibiting unexpected catalytic activities. A nitrogen‐anchored Zn single‐atom catalyst is presented for CO formation from CO2RR with high catalytic activity (onset overpotential down to 24 mV), high selectivity (Faradaic efficiency for CO (FE_CO) up to 95 % at ?0.43 V), remarkable durability (>75 h without decay of FE_CO), and large turnover frequency (TOF, up to 9969 h^?1). Further experimental and DFT results indicate that the four‐nitrogen‐anchored Zn single atom (Zn‐N₄) is the main active site for CO2RR with low free energy barrier for the formation of *COOH as the rate‐limiting step.     

Coordination Tunes Selectivity: Two‐Electron Oxygen Reduction on High‐Loading Molybdenum Single‐Atom Catalysts

Single‐atom catalysts (SACs) have great potential in electrocatalysis. Their performance can be rationally optimized by tailoring the metal atoms, adjacent coordinative dopants, and metal loading. However, doing so is still a great challenge because of the limited synthesis approach and insufficient understanding of the structure–property relationships. Herein, we report a new kind of Mo SAC with a unique O,S coordination and a high metal loading over 10 wt %. The isolation and local environment was identified by high‐angle annular dark‐field scanning transmission electron microscopy and extended X‐ray absorption fine structure. The SACs catalyze the oxygen reduction reaction (ORR) via a 2 e^? pathway with a high H₂O₂ selectivity of over 95 % in 0.10 m KOH. The critical role of the Mo single atoms and the coordination structure was revealed by both electrochemical tests and theoretical calculations.     

Temperature‐Induced Structure Reconstruction to Prepare a Thermally Stable Single‐Atom Platinum Catalyst

Single‐atom noble metals on a catalyst support tend to migrate and agglomerate into nanoparticles owing to high surface free energy at elevated temperatures. Temperature‐induced structure reconstruction of a support can firmly anchor single‐atom Pt species to adapt to a high‐temperature environment. We used Mn₃O₄ as a restructurable support to load single‐atom Pt and further turned into single‐atom Pt‐on‐Mn₂O₃ catalyst via high‐temperature treatment, which is extremely stable under calcination conditions of 800 °C for 5 days in humid air. High‐valence Pt⁴⁺ with more covalent bonds on Mn₂O₃ are essential for anchoring isolated Pt atoms by strong interaction. An optimized catalyst formed by moderate H₂O₂ etching exhibits the best performance and excellent thermal stability of single‐atom Pt in high‐temperature CH₄ oxidation on account of more exposed Pt atoms and strong Pt‐Mn₂O₃ interaction.     

过渡金属单原子电催化剂还原CO2制CO

电催化二氧化碳还原(ECR)技术是实现“碳中和”目标的一种理想途径,而过渡金属单原子催化剂具有电子结构可调、原子利用率高和活性位点均一等特点,在ECR研究中具有显著优势。本文首先介绍了单原子电催化剂在还原CO₂尤其是在选择性生成CO研究中的优势,然后综述了近年来Fe、Co、Ni及其他单原子电催化剂的反应位点调控策略与电催化选择性的调控机制,重点对质子耦合CO₂还原生成CO的中间过程调控进行了归纳总结,并简要展望了发展方向,以期为推动单原子催化剂在ECR中规模化应用提供指导和参考。     

Single‐Molecule Nanocatalysis Shows In Situ Deactivation of Pt/C Electrocatalysts during the Hydrogen‐Oxidation Reaction

By coupling a Pt‐catalyzed fluorogenic reaction with the Pt‐electrocatalyzed hydrogen‐oxidation reaction (HOR), we combine single‐molecule fluorescence microscopy with traditional electrochemical methods to study the real‐time deactivation kinetics of a Pt/C electrocatalyst at single‐particle level during electrocatalytic hydrogen‐oxidation reaction. The decay of the catalytic performance of Pt/C could be mainly attributed to the electrocatalysis‐induced etching or dissolution of Pt nanoparticles. Spontaneous regeneration of activity and incubation period of the Pt electrocatalyst were also observed at single‐particle level. All these new insights are practically useful for the understanding and rational design of highly efficient electrocatalysts for application in fuel cells.     

A Durable Nickel Single‐Atom Catalyst for Hydrogenation Reactions and Cellulose Valorization under Harsh Conditions

Hydrothermally stable, acid‐resistant nickel catalysts are highly desired in hydrogenation reactions, but such a catalyst remains absent owing to the inherent vulnerability of nickel under acidic conditions. An ultra‐durable Ni‐N‐C single‐atom catalyst (SAC) has now been developed that possesses a remarkable Ni content (7.5 wt %) required for practical usage. This SAC shows not only high activities for hydrogenation of various unsaturated substrates but also unprecedented durability for the one‐pot conversion of cellulose under very harsh conditions (245 °C, 60 bar H₂, presence of tungstic acid in hot water). Using integrated spectroscopy characterization and computational modeling, the active site structure is identified as (Ni‐N4)???N, where significantly distorted octahedral coordination and pyridinic N constitute a frustrated Lewis pair for the heterolytic dissociation of dihydrogen, and the robust covalent chemical bonding between Ni and N atoms accounts for its ultrastability.     

Direct Observation of Dynamic Bond Evolution in Single‐Atom Pt/C3N4 Catalysts

Single‐atom catalysts are promising platforms for heterogeneous catalysis, especially for clean energy conversion, storage, and utilization. Although great efforts have been made to examine the bonding and oxidation state of single‐atom catalysts before and/or after catalytic reactions, when information about dynamic evolution is not sufficient, the underlying mechanisms are often overlooked. Herein, we report the direct observation of the charge transfer and bond evolution of a single‐atom Pt/C₃N₄ catalyst in photocatalytic water splitting by synchronous illumination X‐ray photoelectron spectroscopy. Specifically, under light excitation, we observed Pt?N bond cleavage to form a Pt⁰ species and the corresponding C=N bond reconstruction; these features could not be detected on the metallic platinum‐decorated C₃N₄ catalyst. As expected, H₂ production activity (14.7 mmol h^?1 g^?1) was enhanced significantly with the single‐atom Pt/C₃N₄ catalyst as compared to metallic Pt‐C₃N₄ (0.74 mmol h^?1 g^?1).     

Stabilizing a Platinum1 Single‐Atom Catalyst on Supported Phosphomolybdic Acid without Compromising Hydrogenation Activity

In coordination chemistry, catalytically active metal complexes in a zero‐ or low‐valent state often adopt four‐coordinate square‐planar or tetrahedral geometry. By applying this principle, we have developed a stable Pt₁ single‐atom catalyst with a high Pt loading (close to 1 wt %) on phosphomolybdic acid(PMA)‐modified active carbon. This was achieved by anchoring Pt on the four‐fold hollow sites on PMA. Each Pt atom is stabilized by four oxygen atoms in a distorted square‐planar geometry, with Pt slightly protruding from the oxygen planar surface. Pt is positively charged, absorbs hydrogen easily, and exhibits excellent performance in the hydrogenation of nitrobenzene and cyclohexanone. It is likely that the system described here can be extended to a number of stable SACs with superior catalytic activities.     

Controlled Synthesis of a Vacancy‐Defect Single‐Atom Catalyst for Boosting CO2 Electroreduction

The reaction of precursors containing both nitrogen and oxygen atoms with Ni^II under 500 °C can generate a N/O mixing coordinated Ni‐N₃O single‐atom catalyst (SAC) in which the oxygen atom can be gradually removed under high temperature due to the weaker Ni?O interaction, resulting in a vacancy‐defect Ni‐N₃‐V SAC at Ni site under 800 °C. For the reaction of Ni^II with the precursor simply containing nitrogen atoms, only a no‐vacancy‐defect Ni‐N₄ SAC was obtained. Experimental and DFT calculations reveal that the presence of a vacancy‐defect in Ni‐N₃‐V SAC can dramatically boost the electrocatalytic activity for CO₂ reduction, with extremely high CO₂ reduction current density of 65 mA cm^?2 and high Faradaic efficiency over 90 % at ?0.9 V vs. RHE, as well as a record high turnover frequency of 1.35×10⁵ h^?1, much higher than those of Ni‐N₄ SAC, and being one of the best reported electrocatalysts for CO₂‐to‐CO conversion to date.     

Water Adsorption and Dissociation on Ceria‐Supported Single‐Atom Catalysts: A First‐Principles DFT+U Investigation

Single‐atom catalysts have attracted wide attention owing to their extremely high atom efficiency and activities. In this paper, we applied density functional theory with the inclusion of the on‐site Coulomb interaction (DFT+U) to investigate water adsorption and dissociation on clean CeO₂(111) surfaces and single transition metal atoms (STMAs) adsorbed on the CeO₂(111) surface. It is found that the most stable water configuration is molecular adsorption on the clean CeO₂(111) surface and dissociative adsorption on STMA/CeO₂(111) surfaces, respectively. In addition, our results indicate that the more the electrons that transfer from STMA to the ceria substrate, the stronger the binding energies between the STMA and ceria surfaces. A linear relationship is identified between the water dissociation barriers and the d band centers of STMA, known as the generalized Brønsted–Evans–Polanyi principle. By combining the oxygen spillovers, single‐atom dispersion stabilities, and water dissociation barriers, Zn, Cr, and V are identified as potential candidates for the future design of ceria‐supported single‐atom catalysts for reactions in which the dissociation of water plays an important role, such as the water–gas shift reaction.     

Single‐Atom Iron Catalysts on Overhang‐Eave Carbon Cages for High‐Performance Oxygen Reduction Reaction

Single‐atom catalysts have drawn great attention, especially in electrocatalysis. However, most of previous works focus on the enhanced catalytic properties via improving metal loading. Engineering morphologies of catalysts to facilitate mass transport through catalyst layers, thus increasing the utilization of each active site, is regarded as an appealing way for enhanced performance. Herein, we design an overhang‐eave structure decorated with isolated single‐atom iron sites via a silica‐mediated MOF‐templated approach for oxygen reduction reaction (ORR) catalysis. This catalyst demonstrates superior ORR performance in both alkaline and acidic electrolytes, comparable to the state‐of‐the‐art Pt/C catalyst and superior to most precious‐metal‐free catalysts reported to date. This activity originates from its edge‐rich structure, having more three‐phase boundaries with enhanced mass transport of reactants to accessible single‐atom iron sites (increasing the utilization of active sites), which verifies the practicability of such a synthetic approach.     

Hydroformylation of Olefins by a Rhodium Single‐Atom Catalyst with Activity Comparable to RhCl(PPh3)3

Homogeneous catalysts generally possess superior catalytic performance compared to heterogeneous catalysts. However, the issue of catalyst separation and recycling severely limits their use in practical applications. Single‐atom catalysts have the advantages of both homogeneous catalysts, such as “isolated sites”, and heterogeneous catalysts, such as stability and reusability, and thus would be a promising alternative to traditional homogeneous catalysts. In the hydroformylation of olefins, single‐atom Rh catalysts supported on ZnO nanowires demonstrate similar efficiency (TON≈40000) compared to that of homogeneous Wilkinson's catalyst (TON≈19000). HAADF‐STEM and infrared CO chemisorption experiments identified isolated Rh atoms on the support. XPS and XANES spectra indicate that the electronic state of Rh is almost metallic. The catalysts are about one or two orders of magnitude more active than most reported heterogeneous catalysts and can be reused four times without an obvious decline in activity.