Anion–π Catalysis on Carbon Nanotubes

Induced π acidity from polarizability is emerging as the most effective way to stabilize anionic transition states on aromatic π surfaces, that is, anion–π catalysis. To access extreme polarizability, we propose a shift from homogeneous toward heterogeneous anion–π catalysis on higher carbon allotropes. According to benchmark enolate addition chemistry, multi‐walled carbon nanotubes equipped with tertiary amine bases outperform single‐walled carbon nanotubes. This is consistent with the polarizability of the former not only along but also between the tubes. Inactivation by π‐basic aromatics and saturation with increasing catalyst concentration support that catalysis occurs on the π surface of the tubes. Increasing rate and selectivity of existing anion–π catalysts on the surface of unmodified nanotubes is consistent with transition‐state stabilization by electron sharing into the tubes, i.e., induced anion–π interactions. On pristine tubes, anion–π catalysis is realized by non‐covalent interfacing with π‐basic pyrenes.     

Stabilizing Fluorine–π Interactions

A series of N ‐arylimide molecular balances were designed to study and measure fluorine–aromatic (F–π) interactions. Fluorine substituents gave rise to increasingly more stabilizing interactions with more electron‐deficient aromatic surfaces. The attractive F–π interaction is electrostatically driven and is stronger than other halogen–π interactions.     

Effect of Cation–π Interaction on Macroionic Self‐Assembly

A series of rod‐shaped polyoxometalates (POMs) [Bu₄N]₇[Mo₆O₁₈NC(CH₂O)₃MnMo₆O₁₈(OCH₂)₃CNMo₆O₁₈] and [Bu₄N]₇[ArNMo₆O₁₇NC(CH₂O)₃MnMo₆O₁₈(OCH₂)₃CNMo₆O₁₇NAr] (Ar=2,6‐dimethylphenyl, naphthyl and 1‐methylnaphthyl) were chosen to study the effects of cation–π interaction on macroionic self‐assembly. Diffusion ordered spectroscopy (DOSY) and isothermal titration calorimetry (ITC) techniques show that the binding affinity between the POMs and Zn²⁺ ions is enhanced significantly after grafting aromatic groups onto the clusters, leading to the effective replacement of tetrabutylammonium counterions (TBAs) upon the addition of ZnCl₂. The incorporation of aromatic groups results in the significant contribution of cation–π interaction to the self‐assembly, as confirmed by the opposite trend of assembly size vs. ionic strength when compared with those without aromatic groups. The small difference between two aromatic groups toward the Zn²⁺ ions is amplified after combining with the clusters, which consequently triggers the self‐recognition behavior between two highly similar macroanions.     

Asymmetric Anion–π Catalysis on Perylenediimides

Anion–π catalysis, that is the stabilization of anionic transition states on π‐acidic aromatic surfaces, has so far been developed with naphthalenediimides (NDIs). This report introduces perylenediimides (PDIs) to anion–π catalysis. The quadrupole moment of PDIs (+23.2 B) is found to exceed that of NDIs and reach new records with acceptors in the core (+70.9 B), and their larger surface provides space to better accommodate chemical transformations. Unlike NDIs, the activity of PDI catalysts for enolate and enamine addition is determined by the twist of their π surface rather than their reducibility. These results, further strengthened by nitrate inhibition and circular dichroism spectroscopy, support an understanding of anion–π interactions centered around quadrupole moments, i.e., electrostatic contributions, rather than redox potentials and charge transfer. The large PDI surfaces provide access to the highest enantioselectivities observed so far in anion–π catalysis (96 % ee).     

Remote Control of Anion–π Catalysis on Fullerene‐Centered Catalytic Triads

The design, synthesis and evaluation of catalytic triads composed of a central C₆₀ fullerene with an amine base on one side and polarizability enhancers on the other side are reported. According to an enolate addition benchmark reaction, fullerene–fullerene–amine triads display the highest selectivity in anion–π catalysis observed so far, whereas NDI–fullerene–amine triads are not much better than fullerene–amine controls (NDI=naphthalenediimide). These large differences in activity are in conflict with the small differences in intrinsic π acidity, that is, LUMO energy levels and π holes on the central fullerene. However, they are in agreement with the high polarizability of fullerene–fullerene–amine triads. Activation and deactivation of the fullerene‐centered triads by intercalators and computational data on anion binding further indicate that for functional relevance, intrinsic π acidity is less important than induced π acidity, that is, the size of the oriented macrodipole of polarizable π systems that emerges only in response to the interaction with anions and anionic transition states. The resulting transformation is thus self‐induced, the anionic intermediates and transition states create their own anion–π catalyst.     

Diversified Cycloisomerization/Diels–Alder Reactions of 1,6‐Enynes through Bimetallic Relay Asymmetric Catalysis

We report the combination of transition‐metal‐catalyzed diversified cycloisomerization of 1,6‐enynes with chiral Lewis acid promoted asymmetric Diels–Alder reaction to realize asymmetric cycloisomerization/Diels–Alder relay reactions of 1,6‐enynes with electron‐deficient alkenes. A broad spectrum of chiral [5,6]‐bicyclic products could be acquired in high yields (up to 99 %) with excellent diastereoselectivy (>19:1 dr) and enantioselectivity (up to 99 % ee).     

Construction of π‐Surface‐Metalated Pillar[5]arenes which Bind Anions via Anion–π Interactions

By simple ligand exchange of the cationic transition‐metal complexes [(Cp*)M(acetone)₃](OTf)₂ (Cp*=pentamethylcyclopentadienyl and M=Ir or Rh) with pillar[5]arene, mono‐ and polynuclear pillar[5]arenes, a new class of metalated host molecules, is prepared. Single‐crystal X‐ray analysis shows that the charged transition‐metal cations are directly bound to the outer π‐surface of aromatic rings of pillar[5]arene. One of the triflate anions is deeply embedded within the cavity of the trinuclear pillar[5]arenes, which is different to the host–guest behavior of most pillar[5]arenes. DFT calculation of the electrostatic potential revealed that the metalated pillar[5]arenes featured an electron‐deficient cavity due to the presence of the electron‐withdrawing transition metals, thus allowing encapsulation of electron‐rich guests mainly driven by anion–π interactions.     

Anion–π and Cation–π Interactions on the Same Surface

Herein, we address the question whether anion–π and cation–π interactions can take place simultaneously on the same aromatic surface. Covalently positioned carboxylate–guanidinium pairs on the surface of 4‐amino‐1,8‐naphthalimides are used as an example to explore push–pull chromophores as privileged platforms for such “ion pair–π” interactions. In antiparallel orientation with respect to the push–pull dipole, a bathochromic effect is observed. A red shift of 41 nm found in the least polar solvent is in good agreement with the 70 nm expected from theoretical calculations of ground and excited states. Decreasing shifts with solvent polarity, protonation, aggregation, and parallel carboxylate–guanidinium pairs imply that the intramolecular Stark effect from antiparallel ion pair–π interactions exceeds solvatochromic effects by far. Theoretical studies indicate that carboxylate–guanidinium pairs can also interact with the surfaces of π‐acidic naphthalenediimides and π‐basic pyrenes.     

Anion‐π Catalysis: Focus on Nonadjacent Stereocenters

Anion‐π interactions have been recently introduced to catalysis with the idea to stabilize anionic intermediates on π‐acidic surfaces. Realized examples include enolate, enamine and iminium chemistry, domino processes and Diels–Alder reactions. Moving on from the formation of contiguous stereogenic centers on π‐acidic surfaces, herein we report the first asymmetric anion‐π catalysis of cascade reactions that afford nonadjacent stereocenters. Conjugate addition‐protonation of achiral disubstituted enolate donors to 2‐chloroacrylonitrile generates 1,3‐nonadjacent stereocenters with moderate enantioselectivity and diastereoselectivity. The explored catalysts operate with complementary naphthalenediimide and fullerene surfaces with highly positive quadrupole moments and high polarizability, respectively, and proximal amine bases. We find that anion‐π catalysts can increase the diastereoselectivity of the reaction beyond the maximal 1:4.0 dr with conventional catalysts to maximal 5.3:1 dr on the large fullerene surfaces. The enantioselectivity of anion‐π catalysts, best on the confined naphthalenediimide surfaces with strong quadrupole moment, exceed the performance of conventional catalysts except for comparable results with a new, most compact, surprisingly powerful bifunctional control catalyst. Simultaneously increased rates and stereoselectivities compared to control catalysts without π‐acidic surface support that contributions of anion‐π interactions to the catalytic cascade process are significant.     

Synthesis,Structure, and Anion Binding Properties of Electron‐Deficient Tetrahomocorona[4]arenes: Shape Selectivity in Anion–π Interactions

Tetrahomocorona[2]arene[2]tetrazines were constructed by means of a fragment coupling strategy based on nucleophilic aromatic substitution reaction starting from 3,6‐dichlorotetrazine and o‐, m‐, and p‐bis(hydroxymethyl)benzenes. The unprecedented macrocycles gave rectangular box‐like cavities with tunable cavity sizes and deficient electronic properties depending on the substitution pattern of phenylene. Due to anion–π interactions, they formed complexes selectively with azide and thiocyanate owing to complementary shapes between host and guest.     

Anion–π Catalysis of Enolate Chemistry: Rigidified Leonard Turns as a General Motif to Run Reactions on Aromatic Surfaces

To integrate anion–π, cation–π, and ion pair–π interactions in catalysis, the fundamental challenge is to run reactions reliably on aromatic surfaces. Addressing a specific question concerning enolate addition to nitroolefins, this study elaborates on Leonard turns to tackle this problem in a general manner. Increasingly refined turns are constructed to position malonate half thioesters as close as possible on π‐acidic surfaces. The resulting preorganization of reactive intermediates is shown to support the disfavored addition to enolate acceptors to an absolutely unexpected extent. This decisive impact on anion–π catalysis increases with the rigidity of the turns. The new, rigidified Leonard turns are most effective with weak anion–π interactions, whereas stronger interactions do not require such ideal substrate positioning to operate well. The stunning simplicity of the motif and its surprisingly strong relevance for function should render the introduced approach generally useful.