Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Copper oxide supported on magnetic nanoparticles (CuO@γ‐Fe2O3): An efficient and magnetically separable nanocatalyst for addition of amines to carbodiimides towards synthesis of substituted guanidines

Copper oxide supported on magnetic nanoparticles was used as a green magnetic nanocatalyst for hydroamination of carbodiimides towards the synthesis of guanidines. Easy preparation and separation, low cost, non‐sensitivity to moisture and reusability of the catalyst along with diversity and high yield of products are significant features of this method.     

Preparation of Fe3O4@5,10‐dihydropyrido[2,3‐b]quinoxaline‐7,8‐diol copper complex: A capable nanocatalyst for the green synthesis of 1‐substituted 1H‐tetrazoles

Fe₃O₄ magnetic nanoparticles functionalized with 5,10‐dihydropyrido[2,3‐b]quinoxaline‐7,8‐diol were synthesized as was their complex with copper as a novel nanomagnetic iron oxide catalyst via a simple and green method, and characterized using various techniques. The capability of the catalyst was evaluated in the one‐pot three‐component synthesis of different tetrazoles, which showed very good results. Mild reaction conditions, good reusability and simple magnetic work‐up make this methodology interesting for the efficient synthesis of tetrazoles.     

Synthesis and characterization of the novel diamine‐functionalized Fe3O4@SiO2 nanocatalyst and its application for one‐pot three‐component synthesis of chromenes

Fe₃O₄@SiO₂@propyltriethoxysilane@o‐phenylendiamine as an environmentally‐benign functionalized silica‐coated magnetic organometallic nanomaterial has been synthesized and characterized by Fourier transforms infrared (FT‐IR) spectroscopy, scanning electron microscopy (SEM) images and energy dispersive X‐ray (EDX) and vibrating sample magnetometer (VSM) analyses. Then, its catalytic activity was investigated for the one‐pot three‐component condensation reaction between dimedone, malononitrile and various substituted aromatic aldehydes to afford the corresponding 2‐amino‐4H‐chromene derivatives under mild reaction conditions. This nanocatalyst can be easily recovered from the reaction mixture by using a magnet and reused for at least five times without significant decrease in catalytic activity.     

HAp‐encapsulated γ‐Fe2O3‐supported dual acidic heterogeneous catalyst for highly efficient one‐pot synthesis of benzoxanthenones and 3‐pyranylindoles

A novel method is reported for the synthesis of benzoxanthenone and 3‐pyranylindole derivatives via one‐pot three‐component reactions using a newly synthesized HAp‐encapsulated γ‐Fe₂O₃‐supported dual acidic heterogeneous catalyst, as a reusable and highly efficient nanocatalyst. In this protocol the use of the nanocatalyst provided a green, useful and rapid method to generate products in short reaction times (4–20 min) and in excellent yields (87–96%). The paramagnetic nature of the catalyst provided a simple, trouble‐free and facile approach for the separation of the catalyst by applying an external magnet, and it could be used in eight cycles without significant loss in catalytic efficiency.     

Silica‐coated nano‐Fe3O4‐supported iminopyridine palladium complex as an active,phosphine‐free and magnetically separable catalyst for Heck reactions

A novel magnetic nanoparticle‐supported iminopyridine palladium complex was successfully prepared by attaching palladium acetate to iminopyridine ligand‐functionalized silica‐coated nano‐Fe₃O₄. The as‐prepared catalyst was well characterized and was evaluated in Heck reactions in terms of activity and recyclability. It was found to be highly efficient for the reactions of various aryl iodides and aryl bromides having electron‐withdrawing groups with olefins under phosphine‐free and inert atmosphere‐free conditions. Moreover, the catalyst could be conveniently recovered using an external magnet, and the recyclability was influenced by the base in the Heck reaction. The catalyst could be reused at least six times with no significant loss in activity when triethylamine acted as the base.     

Butane‐1‐sulfonic acid immobilized on magnetic Fe3O4@SiO2 nanoparticles: A novel and heterogeneous catalyst for the one‐pot synthesis of barbituric acid and pyrano[2,3‐d] pyrimidine derivatives in aqueous media

Butane‐1‐sulfonic acid immobilized on magnetic Fe₃O₄@SiO₂ nanoparticles (Fe₃O₄@SiO₂‐Sultone) was easily prepared via direct ring opening of 1,4‐butanesultone with nanomagnetic Fe₃O₄@SiO₂. The prepared reagent was characterized and used for the efficient promotion of the synthesis of barbituric acid and pyrano[2,3‐d] pyrimidine derivatives. All reactions were performed under mild and completely heterogeneous reaction conditions affording products in good to high yields. The catalyst is easily isolated from the reaction mixture by magnetic decantation and can be reused at least eight times without significant loss in activity.     

Design,synthesis, characterization and catalytic performance of a new cellulose‐based magnetic nanocomposite in the one‐pot three‐component synthesis of α‐aminonitriles

A sulfonated magnetic cellulose‐based nanocomposite was prepared and characterized using scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction and Fourier transform infrared spectroscopy. Then, it was used as a green nanocatalyst for the synthesis of α‐aminonitriles by a one‐pot three‐component condensation reaction of aldehydes or ketones, amines and trimethylsilylcyanide in ethanol at room temperature. The reaction procedure is simple, yields are very high, reaction time is very short and the catalyst can be easily separated from the reaction mixture and reused in subsequent reactions without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

One‐pot synthesis of 1‐ and 5‐substituted 1H‐tetrazoles using 1,4‐dihydroxyanthraquinone–copper(II) supported on superparamagnetic Fe3O4@SiO2 magnetic porous nanospheres as a recyclable catalyst

An effective one‐pot, convenient process for the synthesis of 1‐ and 5‐substituted 1H‐tetrazoles from nitriles and amines is described using1,4‐dihydroxyanthraquinone–copper(II) supported on Fe₃O₄@SiO₂ magnetic porous nanospheres as a novel recyclable catalyst. The application of this catalyst allows the synthesis of a variety of tetrazoles in good to excellent yields. The preparation of the magnetic nanocatalyst with core–shell structure is presented by using nano‐Fe₃O₄ as the core, tetraethoxysilane as the silica source and poly(vinyl alcohol) as the surfactant, and then Fe₃O₄@SiO₂ was coated with 1,4‐dihydroxyanthraquinone–copper(II) nanoparticles. The new catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometry, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherm analysis and inductively coupled plasma analysis. This new procedure offers several advantages such as short reaction times, excellent yields, operational simplicity, practicability and applicability to various substrates and absence of any tedious workup or purification. In addition, the excellent catalytic performance, thermal stability and separation of the catalyst make it a good heterogeneous system and a useful alternative to other heterogeneous catalysts. Also, the catalyst could be magnetically separated and reused six times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and characterization of copper(II) Schiff base complex supported on Fe3O4 magnetic nanoparticles: a recyclable catalyst for the one‐pot synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones

Fe₃O₄–Schiff base of Cu(II) is found to be a recyclable and heterogeneous catalyst for the rapid and efficient synthesis of various 2,3‐dihydroquinazolin‐4(1H)‐one derivatives from the two‐component condensation of 2‐aminobenzamide and an aldehyde. This reaction is simple, green and cost‐effective. Separation and recycling can also be easily done by magnetic decantation of the Fe₃O₄ nanoparticles with an external magnet. The prepared catalyst was characterized using thermogravimetry, Fourier transform infrared spectroscopy, vibrating sample magnetometry, inductively coupled plasma analysis, X‐ray diffraction and scanning electron microscopy. Copyright © 2015 John Wiley & Sons, Ltd.     

Functionalized graphene oxide supported copper (I) complex as effective and recyclable nanocatalyst for one‐pot three component synthesis of 1,2,3‐triazoles

Efficient, one pot three‐component reaction of alkyl halides, sodium azide with terminal alkynes can be catalyzed by functionalized graphene oxide with copper(I) under thermal conditions. A series of 1,4‐disubstituted 1,2,3‐triazoles were obtained by this one‐pot strategy. The catalyst was prepared and characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), emission scanning electron microscopy (FE‐SEM) and energy dispersive X‐ray (EDX). The catalyst can be reused at least five times without significant deactivation.     

Caesium carbonate supported on hydroxyapatite‐encapsulated Ni0.5Zn0.5Fe2O4 nanocrystallites as a novel magnetically basic catalyst for the one‐pot synthesis of pyrazolo[1,2‐b]phthalazine‐5,10‐diones

A novel nanomagnetic basic catalyst of caesium carbonate supported on hydroxyapatite‐coated Ni_0.5Zn_0.5Fe₂O₄ magnetic nanoparticles (Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃) was prepared. This new catalyst was fully characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopy, X‐ray diffraction and vibrating sample magnetometry techniques, and then the catalytic activity of this catalyst was investigated in the synthesis of 1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives. Also, Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃ could be reused at least five times without significant loss of activity and could be recovered easily by applying an external magnet. Thus, the developed nanomagnetic catalyst is potentially useful for the green and economic production of organic compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

CeCl3·7H2O‐catalyzed one‐pot Kabachnik–Fields reaction: A green protocol for three‐component synthesis of α‐aminophosphonates

CeCl₃·7H₂O has been utilized as an efficient Lewis acid catalyst for the three‐component coupling of aldehydes, aromatic amines, and diethylphosphite to produce α‐aminophosphonates under solvent‐free conditions. The advantages of this protocol are high yield, mild reaction conditions, less environmental pollution, and simple work‐up procedure. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:397–403, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20635     

Postsynthetic modification of IRMOF‐3 with a copper iminopyridine complex as heterogeneous catalyst for the synthesis of 2‐aminobenzothiazoles

A copper iminopyridine complex has been immobilized on to a metal–organic framework (MOF) through postsynthetic modification of IRMOF‐3. The modified MOFs were fully demonstrated by using a variety of methods, and the structural integrity of the modified MOFs has been confirmed by powder X‐ray diffraction (XRD). Furthermore, it was shown that the modified IRMOF‐3 can act as an efficient solid catalyst for the synthesis of 2‐aminobenzothiazoles via the reaction of 2‐iodoanilines with isothiocyanates in a heterogeneous manner. Moreover, the catalyst could be facilely separated from the reaction mixture and reused for six consecutive cycles without significant degradation in catalytic activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Copper‐supported β‐cyclodextrin‐functionalized magnetic nanoparticles: Efficient multifunctional catalyst for one‐pot ‘green’ synthesis of 1,2,3‐triazolylquinazolinone derivatives

The green synthesis of 2‐(4‐((1‐phenyl‐1H‐1,2,3‐triazol‐4‐yl)oxy)phenyl)quinazolin‐4(3H)‐one derivatives is reported. The catalyst for this synthesis is copper‐supported β‐cyclodextrin‐functionalized magnetic silica–iron oxide nanoparticles ([Cu@BCD@SiO₂@SPION]). [Cu@BCD@SiO₂@SPION] simultaneously catalyses ‘click’ reaction, oxidation of C? N bond and multicomponent reaction. The desired 1,2,3‐triazolylquinazolinone product is easily obtained in water at room temperature under mild reaction conditions. Another advantage of the catalyst is its reusability. It can simply be isolated using an external magnet and reused in reactions with no significant decrease in catalyst efficiency. Transmission electron microscopy, scanning electron microscopy, vibrating sample magnetometry and Fourier transform infrared spectroscopy are used for exact characterization of the [Cu@BCD@SiO₂@SPION] catalyst.     

One‐pot synthesis of polysubstituted pyrrolidinones using novel magnetic nanoparticles as an efficient and reusable catalyst

7‐Aminonaphthalene‐1,3‐disulfonic acid‐functionalized magnetic Fe₃O₄ nanoparticles efficiently catalyse the one‐pot multi‐component synthesis of substituted 3‐pyrrolin‐2‐ones without using any other harmful organic reagents. High catalytic activity, ease of recovery, use of an external magnetic field and capability of being reused many times without significant loss of its catalytic activity are additional eco‐friendly properties of this catalytic system. Compared to other methods, our protocol has various advantages such as short reaction times, low catalyst loading, high yields, easy magnetic separation and reusability of the catalyst.     

Dicationic ionic liquids as recyclable catalysts for one‐pot solvent‐free synthesis of α‐aminophosphonates

Some task‐specific ionic liquids N,N,N′,N′‐tetramethyl‐N,N′‐dipropanesulfonic acid ethylene‐diammonium hydrogen sulfate, N,N,N′,N′‐tetramethyl‐N,N′‐dipropanesulfonic acid‐1,3‐propanediammonium hydrogen sulfate, N,N,N′,N′‐ tetramethyl‐N,N′‐ dipropanesulfonic acid‐1,6‐hexanediammonium hydrogen sulfate were prepared. These ionic liquids could be used as efficient and recyclable catalysts for the synthesis of α‐aminophosphonates at room temperature via an one‐pot three‐component reaction under organic solvent‐free conditions with good yields of 83–96%. The postprocessing was simple, and the catalysts could be reused at least six times without noticeably decreasing the catalytic activity. The novel clean procedure offers the advantages including short reaction time, good yields, operational simplicity, and environmentally benign. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 22:1–5, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20647     

NbCl5: an efficient catalyst for one‐pot synthesis of α‐aminophosphonates under solvent‐free conditions

NbCl₅ has been found to be a very effective catalyst for the synthesis of a variety of α‐aminophosphonates through the Kabachnik–Fields reaction of carbonyl compound, amine and diethyl phosphite under solvent‐free conditions. Copyright © 2010 John Wiley & Sons, Ltd.     

Polypyrrole/Fe3O4/CNT as a recyclable and highly efficient catalyst for one‐pot three‐component synthesis of pyran derivatives

Polypyrrole (PPY)/Fe₃O₄/CNT has been synthesized and characterized by FT‐IR, TEM and SEM techniques and its catalytic activity has been evaluated in the synthesis of several series of pyran derivatives. Tetrahydrobenzo[b]pyranes, 4H‐pyran‐3‐carboxylates, 4H,5H‐pyrano[3,2‐c]chromenes and dihydropyrano[2,3‐c]pyrazoles have been successfully prepared from one‐pot three‐component condensation of aldehyde, malononitrile and active methylene‐containing compounds (dimedone /ethyl acetoacetate/4‐hydroxycoumarin/3‐methyl‐2‐pyrazoline‐5‐one) using PPY/Fe₃O₄/CNT as a new and reusable heterogeneous catalyst. The present method offer several advantages such as; high yields of products, short reaction times, easy work‐up procedure and easy separation of the catalyst from the reaction mixture due to its magnetic character. Furthermore, chemoselective synthesis of bis‐benzo[b]pyran from terephthalaldehyde can be achieved by this method.     

(3‐Oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) functionalized magnetic γ‐Fe2O3 nanoparticles: A novel and heterogeneous nanocatalyst for one‐pot and efficient four‐component synthesis of novel spiro[indeno[1,2‐b]quinoxaline derivatives

The efficient synthesis of novel spiro[indeno[1,2‐b]quinoxaline derivatives via the four‐component condensation of amines, ninhydrin, isatoic anhydride, and о‐phenylenediamine derivatives catalyzed by ( 3‐oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) supported on γ‐Fe₂O₃ as novel heterogenous magnetic nanocatalyst was described. The novel nanocatalyst was characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), vibrating sample magnetometry (VSM), Field Emission Scanning Electron Microscopy (FE‐SEM), and thermal analysis (TGA‐DTG). The nanoparticles covered by (3‐oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) showed enhanced catalytic performance in the preparation of spiro[indeno[1,2‐b]quinoxaline derivatives in excellent yields. Moreover, this method showed several advantages such as mild conditions, high yields, easy work‐up, and being environmentally friendly. The catalyst can be easily separated from the reaction mixture by an external magnet, recycled, and reused several times without a noticeable decrease in catalytic activity.