Solid‐State Emission of the Anthracene‐o‐Carborane Dyad from the Twisted‐Intramolecular Charge Transfer in the Crystalline State

The emission process of the o ‐carborane dyad with anthracene originating from the twisted intramolecular charge transfer (TICT) state in the crystalline state is described. The anthracene‐o ‐carborane dyad was synthesized and its optical properties were investigated. Initially, the dyad had aggregation‐ and crystallization‐induced emission enhancement (AIEE and CIEE) properties via the intramolecular charge transfer (ICT) state. Interestingly, the dyad presented the dual‐emissions assigned to both locally excited (LE) and ICT states in solution. From the mechanistic studies and computer calculations, it was indicated that the emission band from the ICT should be attributable to the TICT emission. Surprisingly, even in the crystalline state, the TICT emission was observed. It was proposed from that the compact sphere shape of o ‐carborane would allow for rotation even in the condensed state.     

Stimuli‐responsive antifouling polyisobutylene‐based biomaterials via modular surface functionalization

This article demonstrates a new, modular approach to surface functionalization that harnesses chain entanglement. A layer of functionalized polyisobutylene, (PIB)‐ω, where ω = ‐OH, ‐thymine (T), ‐hexaethylene glycol (HEG), poly(ethylene glycol) (‐PEG‐OH), methoxy‐functionalized poly(ethylene glycol) (‐PEG‐OCH₃), and ‐tetraethylene glycol‐α‐lipoate (TEG‐αL) was adhered to PIB‐based thermoplastic elastomer (TPE) surfaces. X‐ray photoelectron spectroscopy (XPS) at angles ranging from 20° to 75° showed decreasing polar group concentration with increasing penetration depth, confirming segregation of polar groups toward the surface. Water contact angle (WCA) of the PIB‐based TPE dropped from 95° to 79°?83° upon coating, and soaking in water for 24 h further decreased the WCA. Dynamic WCA measurements showed 40–30° receding angles, showing that stimulus from an aqueous environment elicits enrichment of polar groups on the surface. Fibrinogen (Fg) adsorption on the various surfaces was quantified using surface plasmon resonance (SPR). Static and dynamic WCA did not vary significantly among TPE + PIB‐ω surfaces, but there were dramatic differences in Fg adsorption: 256 ng/cm² was measured on the native TPE, which dropped to 40 and 22 ng/cm² on PIB‐PEG‐OCH₃ and PIB‐PEG‐OH‐coated surfaces. PIB‐TEG‐αL‐coated surfaces presented the lowest Fg adsorption with 14 ng/cm². © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1742–1749     

Novel Functional Conjugative Hyperbranched Polymers with Aggregation‐Induced Emission: Synthesis Through One‐Pot “A2+B4” Polymerization and Application as Explosive Chemsensors and PLEDs

With the aim to develop new tetraphenylethylene (TPE)‐based conjugated hyperbranched polymer, TPE units, one famous aggregation‐induced emission (AIE) active group, are utilized to construct hyperbranched polymers with three other aromatic blocks, through an “A₂+B₄” approach by using one‐pot Suzuki polycondensation reaction. These three hyperbranched polymers exhibit interesting AIEE behavior and act as explosive chemsensors with high sensitivity both in the nanoparticles and solid states. This is the first report of the AIE activity of the TPE‐based conjugated hyperbranched polymers. Their corresponding PLED devices also demonstrate good performance.     

Tunable fluorescence conjugated copolymers consisting of tetraphenylethylene and fluorene units: From aggregation‐induced emission enhancement to dual‐channel fluorescence response

A series of new conjugated polymers PTPE_xF_y, which consist of tetraphenylethylene (TPE) units and fluorene (F) units, have been designed and synthesized by Suzuki cross‐coupling polymerization. The polymers PTPE_xF_y exhibited aggregation‐induced emission enhancement and dual‐channel fluorescence response (DCFR) when they were aggregated in solution, and these properties are related with their TPE‐to‐F ratio in the polymer backbone. For PTPE and PTPE_0.5F_0.5 , the fluorescence emission was enhanced by aggregation when water was added into their THF solutions. For the copolymers PTPE_0.3F_0.7 , PTPE_0.2F_0.8 , and PTPE_0.1F_0.9 , the DCFRs were observed when they were aggregated by adding water into their solution, which can be attributed to the different responses of fluorene segments and TPE segments to aggregation. The fluorene segments have an aggregation‐caused quenching characteristic, whereas the TPE segments have an aggregation‐induced emission characteristic. According to the fluorescence lifetime and quantum yield data of the polymer solutions, we have discovered that the polymer's natural life time increases as its TPE content increases. In the solid film, PTPE_0.3F_0.7 and PTPE_0.2F_0.8 showed better quantum yield than other polymers, due to the combination of the excellent fluorescent property of the fluorene groups and the nonplanar conformation of the TPE groups. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Pyridinium‐Substituted TetraphenylethyleneEntailing Alkyne Moiety: Enhancement of Photosensitizing Efficiency and Antimicrobial Activity

Apart from sensing and imaging, luminogens with aggregation‐induced emission (AIE) are also interesting for photosensitizing. The photosensitizing behavior and bacteria‐killing performance of a pyridinium‐substituted tetraphenylethylene with an alkyne group ( TPE‐A‐Py⁺ ) is reported herein. Interestingly, TPE‐A‐Py⁺ exhibits higher photosensitizing efficiency than TPE‐Py⁺ (without alkyne group) when I⁻ was used as a counteranion. This is well explained by the fact that the ΔΕ _ST between the excited singlet state (S ₁) and triplet state (T ₁) was lower for TPE‐A‐Py⁺ than for TPE‐Py⁺ , according to theoretical calculations. Moreover, replacement of I ⁻ with other anions (PF₆⁻, N(SO₂CF₃)₂⁻ and BPh₄⁻) led to a decrease of photosensitizing efficiency for TPE‐A‐Py⁺ . Notably, TPE‐A‐Py⁺ could be used as an efficient photosensitizer to photo‐inactivate ampicillin‐resistant (amp^r) E. coli at low concentration under white‐light irradiation very quickly.     

Visualization of Atom Transfer Radical Polymerization by Aggregation‐Induced Emission Technology

Aggregation‐induced emission (AIE) technology has been demonstrated to be a facile approach for in‐situ monitoring atom transfer radical polymerization (ATRP). A series of tertraphenyl ethylene (TPE)‐containing α‐bromo compounds were synthesized and applied as ATRP initiators. The photoluminescent (PL) emission of the polymerization system is proved to be sensitive to the local viscosity owing to the AIE characteristics of TPE. Linear relationships between the resulting molecular weight M_n and PL intensity were observed in several polymerization systems with different monomers, indicating the variability of this technique. Compared to physical blending, the chemical bonding of the TPE group in the chain end has higher sensitivity and accuracy to the polymer segments and the surrounding environment. This work promoted the combination of the AIE technique and controlled living radical polymerization, and introduced such an optical research platform to the ATRP polymerization process.     

Luminescence Color Tuning from Blue to Near Infrared of Stable Luminescent Solid Materials Based on Bis‐o‐Carborane‐Substituted Oligoacenes

Aryl‐substituted o ‐carboranes have shown highly efficient solid‐state emission in previous studies. To demonstrate color tuning of the solid‐state emission in an aryl‐o ‐carborane‐based system, bis‐o ‐carborane‐substituted oligoacenes were synthesized and their properties were systematically investigated. Optical and electrochemical measurements revealed efficient decreases in energy band gaps and lowest unoccupied molecular orbital (LUMO) levels by adding a number of fused benzene rings for the extension of π‐conjugation. As a consequence, bright solid‐state emission was observed in the region from blue to near infrared (NIR). Furthermore, various useful features were obtained from the modified o ‐carboranes as an optical material. The naphthalene derivatives exhibited aggregation‐induced emission (AIE) and almost 100 % quantum efficiency in the crystalline state. Furthermore, it was shown that the tetracene derivative with NIR‐emissive properties had high durability toward photo‐bleaching under UV irradiation.     

An Intracellular H2O2‐Responsive AIEgen for the Peroxidase‐Mediated Selective Imaging and Inhibition of Inflammatory Cells

Inflammatory cells have gained widespread attention because inflammatory diseases increase the risk for many types of cancer. Therefore, it is urgent and important to implement detection and treatment methods for inflammatory cells. Herein, we constructed a theranostic probe with aggregation‐induced emission (AIE) characteristics, in which tetraphenylethene (TPE) was modified with two tyrosine (Tyr) moieties. Owing to the H₂O₂‐dependent, enzyme‐catalyzed dityrosine formation, Tyr‐containing TPE ( TT ) molecules crosslink through dityrosine linkages to induce the formation of hydrophobic aggregates, activating the AIE process in inflammatory cells that contain H₂O₂ and overexpress myeloperoxidase. The emission turn‐on resulting from the crosslinking of TT molecules could be used to distinguish between inflammatory and normal cells. Moreover, the massive TT aggregates induced mitochondria damage and cell apoptosis. This study demonstrates that the H₂O₂‐responsive peroxidase‐activated AIEgen holds great promise for inflammatory‐cell selective imaging and inhibition.     

Aggregation‐Induced Emission and Aggregation‐Promoted Photo‐oxidation in Thiophene‐Substituted Tetraphenylethylene Derivative

Aggregation‐induced emission combined with aggregation‐promoted photo‐oxidation has been reported only in two works quite recently. In fact, this phenomenon is not commonly observed for AIE‐active molecules. In this work, a new tetraphenylethylene derivative (TPE‐4T) with aggregation‐induced emission (AIE) and aggregation‐promoted photo‐oxidation was synthesized and investigated. The pristine TPE‐4T film exhibits strong bluish‐green emission, which turns to quite weak yellow emission after UV irradiation. Interestingly, after solvent treatment, the weakly fluorescent intermediate will become bright‐yellow emitting. Moreover, the morphology of the TPE‐4T film could be regulated by UV irradiation. The wettability of the TPE‐4T microcrystalline surface is drastically changed from hydrophobic to hydrophilic. This work contributes a new member to the aggregation induced photo‐oxidation family and enriches the photo‐oxidation study of tetraphenylethylene derivatives.     

Decomposition‐Assembly of Tetraphenylethylene Nanoparticles With Uniform Size and Aggregation‐Induced Emission property

Tetraphenylethylene (TPE)‐substituted poly(allylamine hydrochloride) (PAH‐g‐TPE) is synthesized by a Schiff base reaction between PAH and TPE‐CHO. The PAH‐g‐TPE forms micelles in water at pH 6, which are further transformed into pure TPE‐CHO nanoparticles (NPs) with a diameter of ≈300 nm after incubation in a solution of low pH value. In contrast, only amorphous precipitates are obtained when TPE‐CHO methanol solution is incubated in water. The aggregation‐induced emission feature of the TPE molecule is completely retained in the TPE NPs, which can be internalized into cells and show blue fluorescence. Formation mechanism of the TPE NPs is proposed by taking into account the guidance effect of linear and charged PAH molecules, and the propeller‐stacking manner between the TPE‐CHO molecules.     

Turn‐On Fluorescence in Tetra‐NHC Ligands by Rigidification through Metal Complexation: An Alternative to Aggregation‐Induced Emission

Two tetraphenylethylene (TPE) bridged tetraimidazolium salts, [H₄ L ‐Et](PF₆)₄ and [H₄ L ‐Bu](PF₆)₄, were used as precursors for the synthesis of the dinuclear Ag^I and Au^I tetracarbene complexes [Ag₂( L ‐Et)](PF₆)₂, [Ag₂( L ‐Bu)](PF₆)₂, [Au₂( L ‐Et)](PF₆)₂, and [Au₂( L ‐Bu)](PF₆)₂. The tetraimidazolium salts show almost no fluorescence (Φ _F<1 %) in dilute solution while their NHC complexes display fluorescence “turn‐on” (Φ _F up to 47 %). This can be ascribed to rigidification mediated by the restriction of intramolecular rotation within the TPE moiety upon complexation. DFT calculations confirm that the metals are not involved in the lowest excited singlet and triplet states, thus explaining the lack of phosphorescence and fast intersystem crossing as a result of heavy atom effects. The rigidification upon complexation for fluorescence turn‐on constitutes an alternative to the known aggregation‐induced emission (AIE).     

Anion‐Coordination‐Induced Turn‐On Fluorescence of an Oligourea‐Functionalized Tetraphenylethene in a Wide Concentration Range

A tetrakis(bisurea)‐decorated tetraphenylethene (TPE) ligand ( L² ) was designed, which, upon coordination with phosphate ions, displays fluorescence “turn‐on” over a wide concentration range, from dilute to concentrated solutions and to the solid state. The fluorescence enhancement can be attributed to the restriction of the intramolecular rotation of TPE by anion coordination. The crystal structure of the A₄L₂ (A=anion) complex of L² with monohydrogen phosphate provides direct evidence for the coordination mode of the anion. This “anion‐coordination‐induced emission” (ACIE) is another approach for fluorescence turn‐on in addition to aggregation‐induced emission (AIE).     

A Red to Near‐IR Fluorogen: Aggregation‐Induced Emission,Large Stokes Shift,High Solid Efficiency and Application in Cell‐Imaging

A tetraphenylethene (TPE) derivative modified with the strong electron acceptor 2‐dicyano‐methylene‐3‐cyano‐4,5,5‐trimethyl‐2,5‐dihydrofuran (TCF) was obtained in high yield by a simple two‐step reaction. The resultant TPE‐TCF showed evident aggregation‐induced emission (AIE) features and pronounced solvatochromic behavior. Changing the solvent from apolar cyclohexane to highly polar acetonitrile, the emission peak shifted from 560 to 680 nm (120 nm redshift). In an acetonitrile solution and in the solid powder, the Stokes shifts are as large as 230 and 190 nm, respectively. The solid film emits red to near‐IR (red‐NIR) fluorescence with an emission peak at 670 nm and a quantum efficiency of 24.8 %. Taking the advantages of red‐NIR emission and high efficiency, nanoparticles (NPs) of TPE‐TCF were fabricated by using tat‐modified 1,2‐distearoylsn‐glycero‐3‐phosphor‐ethanol‐amine‐N‐[methoxy‐(polyethyl‐eneglycol)‐2000] as the encapsulation matrix. The obtained NPs showed perfect membrane penetrability and high fluorescent imaging quality of cell cytoplasm. Upon co‐incubation with 4,6‐diamidino‐2‐phenylindole (DAPI) in the presence of tritons, the capsulated TPE‐TCF nanoparticles could enter into the nucleus and displayed similar staining properties to those of DAPI.     

Color-tunable and Highly Emissive Solid Materials Constructed from Tetraphenylethylene-o-carborane-based Building Blocks: Synthesis,Aggregation-induced emission,and Photophysics

A novel kind of expanded tetraphenylethylene (TPE)-carborane-TPE pentad has been synthesized by using two adjacent carborane moieties as central bridges and three TPE units in lateral positions. Its solid-state fluorescence quantum yield was substantially increased to 68.2% by expanding the number of bridges between carborane and TPE. Subsequently, the emission color shifted from blue to orange-yellow (126 nm). Mechanical insights into the electronic structure of the extended TPE-carborane-TPE pentads were obtained from density functional theory (DFT) calculations.     

Tetraphenylethylene‐based Glycoconjugate as a Fluorescence “Turn‐On” Sensor for Cholera Toxin

Tetraphenylethylene (TPE)‐based glycoconjugates were easily synthesized by copper(I)‐catalyzed “click reactions” between propargyl‐attached TPE and azido‐functionalized sugars. The TPE compound bearing lactosyl moieties ( Lac‐TPE ) was found to be a fluorescence “turn‐on” sensor for cholera toxin by virtue of aggregation‐induced emission characteristics of the TPE motif owing to the specific interaction of lactose with the cholera toxin B subunit, whilst a cellobiose‐functionalized TPE derivative did not show any response to the toxin. Therefore, Lac‐TPE shows promising applications in the detection of cholera toxin, as well as in the investigation of carbohydrate–protein interaction.     

Cross‐linking induced thermoresponsive hydrogel with light emitting and self‐healing property

Development of self‐healing hydrogels with thermoresponse is very important for artificial smart materials. In this article, the self‐healing hydrogels with reversible thermoresponses were designed through across‐linking‐induced thermoresponse (CIT) mechanism. The hydrogels were prepared from ketone group containing copolymer bearing tetraphenyl ethylene (TPE) and cross‐linked by naphthalene containing acylhydrazide cross‐linker. The mechanical property, light emission, self‐healing, and thermo‐response of the hydrogels were investigated intensively. With regulation of the copolymer composition, the hydrogels showed thermoresponse with the LCST varied from above to below body temperature. At the same time, the hydrogels showed self‐healing property based on the reversible characteristic of the acylhydrazone bond. The hydrogel also showed temperature‐regulated light emission behavior based on AIE property of the TPE unit. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 869–877     

Simple Biosensor with High Selectivity and Sensitivity: Thiol‐Specific Biomolecular Probing and Intracellular Imaging by AIE Fluorogen on a TLC Plate through a Thiol–Ene Click Mechanism

A handy, specific, sensitive bioprobe has been developed. Tetraphenylethene (TPE) was functionalized by a maleimide (MI) group, giving a TPE‐MI adduct that was nonemissive in both solution and the solid state. It was readily transformed into a fluorogen showing an aggregation‐induced emission (AIE) property by the click addition of thiol to its MI pendant. The click reaction and the AIE effect enabled TPE‐MI to function as a thiol‐specific bioprobe in the solid state. Thus, the spot of TPE‐MI on a TLC plate became emissive when it had been exposed to L ‐cysteine, an amino acid containing a thiol group, but remained nonemissive when exposed to other amino acids that lack free thiol units. The thiol‐activated emission was rapid and strong, readily detected by the naked eye at an analyte concentration as low as approximately 1 ppb, thanks to the “lighting up” nature of the bioprobing process. Similarly, the emission of TPE‐MI was turned on only by the proteins containing free thiol units, such as glutathione. Clear fluorescence images were taken when living cells were stained by using TPE‐MI as a visualization agent, affording a facile fluorescent maker for mapping the distribution of thiol species in cellular systems.     

Carborane‐Induced Excimer Emission of Severely Twisted Bis‐o‐Carboranyl Chrysene

The synthesis of a highly twisted chrysene derivative incorporating two electron deficient o‐carboranyl groups is reported. The molecule exhibits a complex, excitation‐dependent photoluminescence, including aggregation‐induced emission (AIE) with good quantum efficiency and an exceptionally long singlet excited state lifetime. Through a combination of detailed optical studies and theoretical calculations, the excited state species are identified, including an unusual excimer induced by the presence of o‐carborane. This is the first time that o‐carborane has been shown to induce excimer formation ab initio, as well as the first observation of excimer emission by a chrysene‐based small molecule in solution. Bis‐o‐carboranyl chrysene is thus an initial member of a new family of o‐carboranyl phenacenes exhibiting a novel architecture for highly‐efficient multi‐luminescent fluorophores.     

Optical Properties and Photo‐Oxidation of Tetraphenylethene‐Based Fluorophores

We report the optical properties of tetraphenylethene (TPE) and other TPE derivatives functionalised with an octyl group (TPE‐OCT) and polyethyleneglycol group (TPE‐PEG) in the side chain. We compared TPE‐OCT and TPE‐PEG with TPE in both organic solvents and under aqueous conditions. All materials exhibit aggregation‐induced emission, however, uncommonly, TPE‐PEG seems to aggregate in aqueous solution with enhanced photoluminescence quantum efficiency (PLQE) relative to that in organic solvents. All three materials can be photo‐oxidised in solution to their diphenylphenanthrene derivative by irradiation with UV light (at both ≈1 and ≈5 mW cm^?2), with a subsequent enhancement in PL efficiency. The electron‐donating ether group increases the rate of oxidation relative to bare TPE and also photo‐oxidation was shown to be solvent and concentration dependent. Finally, photo‐oxidation was also demonstrated in the aggregate state.     

A 1,3‐Indandione‐Functionalized Tetraphenylethene: Aggregation‐Induced Emission,Solvatochromism, Mechanochromism,and Potential Application as a Multiresponsive Fluorescent Probe

A tetraphenylethene (TPE) derivative substituted with the electron‐acceptor 1,3‐indandione (IND) group was designed and prepared. The targeted IND‐TPE reserves the intrinsic aggregation‐induced emission (AIE) property of the TPE moiety. Meanwhile, owing to the decorated IND moiety, IND‐TPE demonstrates intramolecular charge‐transfer process and pronounced solvatochromic behavior. When the solvent is changed from apolar toluene to highly polar acetonitrile, the emission peak redshifts from 543 to 597 nm. IND‐TPE solid samples show an evident mechanochromic process. Grinding of the as‐prepared powder sample induces a redshift of emission from green (peak at 515 nm) to orange (peak at 570 nm). The mechanochromic process is reversible in multiple grinding–thermal annealing and grinding–solvent‐fuming cycles, and the emission of the solid sample switches between orange (ground) and yellow (thermal/solvent‐fuming‐treated) colors. The mechanochromism is ascribed to the phase transition between amorphous and crystalline states. IND‐TPE undergoes a hydrolysis reaction in basic aqueous solution, thus the red‐orange emission can be quenched by OH^? or other species that can induce the generation of sufficient OH^?. Accordingly, IND‐TPE has been used to discriminatively detect arginine and lysine from other amino acids, due to their basic nature. The experimental data are satisfactory. Moreover, the hydrolyzation product of IND‐TPE is weakly emissive in the resultant mixture but becomes highly blue‐emissive after the illumination for a period by UV light. Thus IND‐TPE can be used as a dual‐responsive fluorescent probe, which may extend the application of TPE‐based molecular probes in chemical and biological categories.