Fe‐Doped Ni3C Nanodots in N‐Doped Carbon Nanosheets for Efficient Hydrogen‐Evolution and Oxygen‐Evolution Electrocatalysis

Uniform Ni₃C nanodots dispersed in ultrathin N‐doped carbon nanosheets were successfully prepared by carburization of the two dimensional (2D) nickel cyanide coordination polymer precursors. The Ni₃C based nanosheets have lateral length of about 200 nm and thickness of 10 nm. When doped with Fe, the Ni₃C based nanosheets exhibited outstanding electrocatalytic properties for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). For example, 2 at % Fe (atomic percent) doped Ni₃C nanosheets depict a low overpotential (292 mV) and a small Tafel slope (41.3 mV dec⁻¹) for HER in KOH solution. An outstanding OER catalytic property is also achieved with a low overpotential of 275 mV and a small Tafel slope of 62 mV dec⁻¹ in KOH solution. Such nanodot‐incorporated 2D hybrid structures can serve as an efficient bifunctional electrocatalyst for overall water splitting.     

Stable Hierarchical Bimetal–Organic Nanostructures as HighPerformance Electrocatalysts for the Oxygen Evolution Reaction

The integration of heterometallic units and nanostructures into metal–organic frameworks (MOFs) used for the oxygen evolution reaction (OER) can enhance the electrocatalytic performance and help elucidate underlying mechanisms. We have synthesized a series of stable MOFs (CTGU‐10a1–d1) based on trinuclear metal carboxylate clusters and a hexadentate carboxylate ligand with a (6,6)‐connected nia net. We also present a strategy to synthesize hierarchical bimetallic MOF nanostructures (CTGU‐10a2–d2). Among these, CTGU‐10c2 is the best material for the OER, with an overpotential of 240 mV at a current density of 10 mA cm^?2 and a Tafel slope of 58 mV dec^?1. This is superior to RuO₂ and confirms CTGU‐10c2 as one of the few known high‐performing pure‐phase MOF‐OER electrocatalysts. Notably, bimetallic CTGU‐10b2 and c2 show an improved OER activity over monometallic CTGU‐10a2 and d2. Both DFT and experiments show that the remarkable OER performance of CTGU‐10c2 is due to the presence of unsaturated metal sites, a hierarchical nanobelt architecture, and the Ni–Co coupling effect.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

A Nickel Dithiolate Water Reduction Catalyst Providing Ligand‐Based Proton‐Coupled Electron‐Transfer Pathways

A nickel pyrazinedithiolate ([Ni(dcpdt)₂]²⁻; dcpdt=5,6‐dicyanopyrazine‐2,3‐dithiolate), bearing a NiS₄ core similar to the active center of [NiFe] hydrogenase, is shown to serve as an efficient molecular catalyst for the hydrogen evolution reaction (HER). This catalyst shows effectively low overpotentials for HER (330–400 mV at pH 4–6). Moreover, the turnover number of catalysis reaches 20 000 over the 24 h electrolysis with a high Faradaic efficiency, 92–100 %. The electrochemical and DFT studies reveal that diprotonated one‐electron‐reduced species (i.e., [Ni^II(dcpdt)(dcpdtH₂)]⁻ or [Ni^II(dcpdtH)₂]⁻) forms at pH<6.4 via ligand‐based proton‐coupled electron‐transfer (PCET) pathways, leading to electrocatalytic HER without applying the highly negative potential required to generate low‐valent nickel intermediates. This is the first example of catalysts exhibiting such behavior.     

Bi‐Microporous Metal–Organic Frameworks with Cubane [M4(OH)4] (M=Ni,Co) Clusters and Pore‐Space Partition for Electrocatalytic Methanol Oxidation Reaction

Embedding cubane [M₄(OH)₄] (M=Ni, Co) clusters within the matrix of metal–organic frameworks (MOFs) is a strategy to develop materials with unprecedented synergistic properties. Herein, a new material type based on the pore‐space partition of the cubic primitive minimal‐surface net (MOF‐14‐type) has been realized. CTGU‐15 made from the [Ni₄(OH)₄] cluster not only has very high BET surface area (3537 m² g^?1), but also exhibits bi‐microporous features with well‐defined micropores at 0.86 nm and 1.51 nm. Furthermore, CTGU‐15 is stable even under high pH (0.1 m KOH), making it well suited for methanol oxidation in basic medium. The optimal hybrid catalyst KB&CTGU‐15 (1:2) made from ketjen black (KB) and CTGU‐15 exhibits an outstanding performance with a high mass specific peak current of 527 mA mg^?1 and excellent peak current density (29.8 mA cm^?2) at low potential (0.6 V). The isostructural cobalt structure (CTGU‐16) has also been synthesized, further expanding the application potential of this material type.     

Bi‐Microporous Metal–Organic Frameworks with Cubane [M4(OH)4] (M=Ni,Co) Clusters and Pore‐Space Partition for Electrocatalytic Methanol Oxidation Reaction

Embedding cubane [M₄(OH)₄] (M=Ni, Co) clusters within the matrix of metal–organic frameworks (MOFs) is a strategy to develop materials with unprecedented synergistic properties. Herein, a new material type based on the pore‐space partition of the cubic primitive minimal‐surface net (MOF‐14‐type) has been realized. CTGU‐15 made from the [Ni₄(OH)₄] cluster not only has very high BET surface area (3537 m² g^?1), but also exhibits bi‐microporous features with well‐defined micropores at 0.86 nm and 1.51 nm. Furthermore, CTGU‐15 is stable even under high pH (0.1 m KOH), making it well suited for methanol oxidation in basic medium. The optimal hybrid catalyst KB&CTGU‐15 (1:2) made from ketjen black (KB) and CTGU‐15 exhibits an outstanding performance with a high mass specific peak current of 527 mA mg^?1 and excellent peak current density (29.8 mA cm^?2) at low potential (0.6 V). The isostructural cobalt structure (CTGU‐16) has also been synthesized, further expanding the application potential of this material type.     

Molybdenum‐tungsten Oxide Nanowires Rich in Oxygen Vacancies as An Advanced Electrocatalyst for Hydrogen Evolution

Electrolysis of water is a promising way to produce hydrogen fuel in large scale. The commercialization of this technology requires highly efficient non‐noble metal electrocatalysts to decease the energy input for the hydrogen evolution reaction (HER). In this work, a novel nanowire structured molybdenum‐tungsten bimetallic oxide (CTAB‐D‐W₄MoO₃) is synthesized by a simple hydrothermal method followed with post annealing treatment. The obtained metal oxides feature with enhanced conductivity, rich oxygen vacancies and customized electronic structure. As such, the composite electrocatalyst exhibits excellent electrocatalytic performance for HER in an acidic environment, achieving a large current density of 100 mA cm^?2 at overpotential of only 286 mV and a small Tafel slope of 71.2 mV dec^?1. The excellent electrocatalytic HER performance of CTAB‐D‐W₄MoO₃ is attributed to the unique nanowire structure, rich catalytic active sites and promoted electron transfer rate.     

Controlled Synthesis of 3D Flower‐like Ni2P Composed of Mesoporous Nanoplates for Overall Water Splitting

Developing efficient non‐noble metal and earth‐abundant electrocatalysts with tunable microstructures for overall water splitting is critical to promote clean energy technologies for a hydrogen economy. Herein, novel three‐dimensional (3D) flower‐like Ni₂P composed of mesoporous nanoplates with controllable morphology and high surface area was prepared by a hydrothermal method and low‐temperature phosphidation as efficient electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Compared with the urchin‐like Ni_x P_y , the 3D flower‐like Ni₂P with a diameter of 5 μm presented an efficient and stable catalytic performance in 0.5 m H₂SO₄, with a small Tafel slope of 79 mV dec⁻¹ and an overpotential of about 240 mV at a current density of 10 mA cm⁻² with a mass loading density of 0.283 mg cm⁻². In addition, the catalyst also exhibited a remarkable performance for the OER in 1.0 m KOH electrolyte, with an overpotential of 320 mV to reach a current density of 10 mA cm⁻² and a small Tafel slope of 72 mV dec⁻¹. The excellent catalytic performance of the as‐prepared Ni₂P may be ascribed to its novel 3D morphology with unique mesoporous structure.     

Graphitic Carbon Nitride Nanoribbons: Graphene‐Assisted Formation and Synergic Function for Highly Efficient Hydrogen Evolution

The development of new promising metal‐free catalysts is of great significance for the electrocatalytic hydrogen evolution reaction (HER). Herein, a rationally assembled three‐dimensional (3D) architecture of 1D graphitic carbon nitride (g‐C₃N₄) nanoribbons with 2D graphene sheets has been developed by a one‐step hydrothermal method. Because of the multipathway of charge and mass transport, the hierarchically structured g‐C₃N₄ nanoribbon–graphene hybrids lead to a high electrocatalytic ability for HER with a Tafel slope of 54 mV decade^?1, a low onset overpotential of 80 mV and overpotential of 207 mV to approach a current of 10 mA cm^?2, superior to those non‐metal materials and well‐developed metallic catalysts reported previously. This work presents a great advance for designing and developing highly efficient metal‐free catalyst for hydrogen evolution.     

Large‐Area,Free‐Standing,Two‐Dimensional Supramolecular Polymer Single‐Layer Sheets for Highly Efficient Electrocatalytic Hydrogen Evolution

The rational construction of covalent or noncovalent organic two‐dimensional nanosheets is a fascinating target because of their promising applications in electronics, membrane technology, catalysis, sensing, and energy technologies. Herein, a large‐area (square millimeters) and free‐standing 2D supramolecular polymer (2DSP) single‐layer sheet (0.7–0.9 nm in thickness), comprising triphenylene‐fused nickel bis(dithiolene) complexes has been readily prepared by using the Langmuir–Blodgett method. Such 2DSPs exhibit excellent electrocatalytic activities for hydrogen generation from water with a Tafel slope of 80.5 mV decade⁻¹ and an overpotential of 333 mV at 10 mA cm⁻², which are superior to that of recently reported carbon nanotube supported molecular catalysts and heteroatom‐doped graphene catalysts. This work is promising for the development of novel free‐standing organic 2D materials for energy technologies.     

An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1−xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g⁻¹ h⁻¹ and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.     

Isostructural NiII Metal–Organic Frameworks (MOFs) for Efficient Electrocatalysis of Oxygen Evolution Reaction and for Gas Sorption Properties

Design and synthesis of stable, active and cost-effective electrocatalyst for water splitting applications is an emerging area of research, given the depletion of fossil fuels. Herein, two isostructural Ni^II redox-active metal–organic frameworks (MOFs) containing flexible tripodal trispyridyl ligand ( L ) and linear dicarboxylates such as terephthalate (TA) and 2-aminoterphthalate (H₂NTA) are studied for their catalytic activity in oxygen evaluation reaction (OER). The 2D-layered MOFs form 3D hydrogen bonded frameworks containing one-dimensional hydrophilic channels that are filled with water molecules. The electrochemical studies reveal that MOFs display an efficient catalytic activity towards oxygen evolution reaction in alkaline conditions with an overpotential as low as 356 mV. Further, these 2D-MOFs exhibit excellent ability to adsorb water vapor (180–230 cc g⁻¹ at 273 K) and CO₂ (33 cc g⁻¹ at 273 K). The presence of hydrophilic functionality in the frameworks was found to significantly enhance the electrocatalytic activity as well as H₂O sorption.     

Phosphorus‐Modified Tungsten Nitride/Reduced Graphene Oxide as a High‐Performance,Non‐Noble‐Metal Electrocatalyst for the Hydrogen Evolution Reaction

Phosphorus‐modified tungsten nitride/reduced graphene oxide (P‐WN/rGO) is designed as a high‐efficient, low‐cost electrocatalyst for the hydrogen evolution reaction (HER). WN (ca. 3 nm in size) on rGO is first synthesized by using the H₃[PO₄(W₃O₉)₄] cluster as a W source. Followed by phosphorization, the particle size increase slightly to about 4 nm with a P content of 2.52 at %. The interaction of P with rGO and WN results in an obvious increase of work function, being close to Pt metal. The P‐WN/rGO exhibits low onset overpotential of 46 mV, Tafel slope of 54 mV dec⁻¹, and a large exchange current density of 0.35 mA cm⁻² in acid media. It requires overpotential of only 85 mV at current density of 10 mA cm⁻², while remaining good stability in accelerated durability testing. This work shows that the modification with a second anion is powerful way to design new catalysts for HER.     

Highly Conductive Cobalt Perthiolated Coronene Complex for Efficient Hydrogen Evolution

Metal-bis(dithiolene) is one of the most promising structures showing redox activity, excellent electron transport and magnetic properties as well as catalytic activities. Perthiolated coronene (PTC), an emerging highly symmetric ligand containing the smallest graphene nanoplate was employed to manufacture a hybrid material with fused metal-bis(dithiolene) and graphene nanoplate, and it has been demonstrated as an efficient strategy for the construction of multifunctional materials recently. Herein, Co-PTC, a 2D MOF containing Co-bis(dithiolene) and coronene units is prepared via a homogeneous reaction for the first time as powder samples, which are bar-shaped microparticles composed of nanosheets. A neutral formula of [Co₃(C₂₄S₁₂)]_n is verified for Co-PTC. Co-PTC plays an ultrahigh conductivity of approximately 45 S cm⁻¹ at room temperature as compressed samples, which is among the highest value ever reported for the compressed powder samples of conducting MOFs. Moreover, Co-PTC exhibits good electrocatalytic performance in the hydrogen evolution reaction (HER) with a Tafel slope of 189 mV decade⁻¹ and an operating overpotential of 227 mV at 10 mA cm⁻¹ with pH=0, as well as a remarkable stability in the extremely acidic aqueous solutions, which is the best hydrogen evolution properties among metal–organic compounds.     

Bimetallic Cage-Based Metal–Organic Frameworks for Electrochemical Hydrogen Evolution Reaction with Enhanced Activity

A cage-based metal–organic framework (Ni-NKU-101) with biphenyl-3,3’,5,5’-tetracarboxylic acid was synthesized via solvothermal method. Ni-NKU-101 contains two types of cages based on trinuclear and octa-nuclear nickel-clusters that are connected with each other by the 4-connected ligands, to form a 3D framework with a new topology. A mixed-metal strategy was used to synthesize isostructural bimetallic MOFs of M_xNi_1-x-NKU-101 (M=Mn, Co, Cu, Zn). The electrocatalytic studies showed that the hydrogen evolution reaction (HER) activity of Cu_xNi_1-x-NKU-101 is much higher than that of other M_xNi_1-x-NKU-101 catalysts in acidic aqueous solution, owing to the synergistic effect of the bimetallic centers. The optimized Cu_0.19Ni_0.81-NKU-101 has an overpotential of 324 mV at 10 mA cm⁻² and a Tafel slope of 131 mV dec⁻¹. The mechanism of HER activity over these bimetallic MOF-based electrocatalysts are discussed in detail.     

Two Three‐Dimensional Metal‐Organic Frameworks Constructed from Alkaline Earth Metal Cations (Sr and Ba) and 5‐Nitroisophthalicacid – Synthesis,Charaterization, and Thermochemistry

Two MOFs of [Sr^II(5‐NO₂‐BDC)(H₂O)₆] ( 1 ) and [Ba^II(5‐NO₂‐BDC)(H₂O)₆] ( 2 ) have been synthesized in water using alkaline earth metal salts and the rigid organic ligand 5‐NO₂‐H₂BDC. The compounds were characterized by elemental analysis, infrared spectrum, thermal analysis, and X‐ray crystallography. Crystal structure analyses have shown that the two complexes are isostructural as evidenced by IR spectra and TG‐DTA. Both compounds present three‐dimensional frameworks built up from infinite chains of edge‐sharing twelve‐membered rings through O–H···O hydrogen bonds. The specific heat capacities of the title complexes have been determined by an improved RD496‐III microcalorimeter with the values of (109.29 ± 0.693) J mol⁻¹ K⁻¹ and (81.162 ± 0.858) J mol⁻¹ K⁻¹ at 298.15 K, and the molar enthalpy changes of the formation reactions of complexes at 298.15 K were calculated as (4.897 ± 0.008) kJ mol⁻¹ and (2.617 ± 0.009) kJ mol⁻¹, respectively.     

Efficient Overall Water‐Splitting Electrocatalysis Using Lepidocrocite VOOH Hollow Nanospheres

Herein we report the control synthesis of lepidocrocite VOOH hollow nanospheres and further their applications in electrocatalytic water splitting for the first time. By tuning the surface area of the nanospheres, the optimal performance can be achieved with low overpotentials of 270 mV for the oxygen evolution reaction (OER) and 164 mV for the hydrogen evolution reaction (HER) at 10 mA cm⁻² in 1 m KOH, respectively. Furthermore, when used as both the anode and cathode for overall water splitting, a low cell voltage of 1.62 V is required to reach the current density of 10 mA cm⁻², making the VOOH hollow nanospheres an efficient alternative to water splitting.     

RuP2‐Based Catalysts with Platinum‐like Activity and Higher Durability for the Hydrogen Evolution Reaction at All pH Values

Highly active, stable, and cheap Pt‐free catalysts for the hydrogen evolution reaction (HER) are under increasing demand for future energy conversion systems. However, developing HER electrocatalysts with Pt‐like activity that can function at all pH values still remains as a great challenge. Herein, based on our theoretical predictions, we design and synthesize a novel N,P dual‐doped carbon‐encapsulated ruthenium diphosphide (RuP₂@NPC) nanoparticle electrocatalyst for HER. Electrochemical tests reveal that, compared with the Pt/C catalyst, RuP₂@NPC not only has Pt‐like HER activity with small overpotentials at 10 mA cm⁻² (38 mV in 0.5 m H₂SO₄, 57 mV in 1.0 m PBS and 52 mV in 1.0 m KOH), but demonstrates superior stability at all pH values, as well as 100 % Faradaic yields. Therefore, this work adds to the growing family of transition‐metal phosphides/heteroatom‐doped carbon heterostructures with advanced performance in HER.     

Electrodeposited Cobalt‐Phosphorous‐Derived Films as Competent Bifunctional Catalysts for Overall Water Splitting

One of the challenges to realize large‐scale water splitting is the lack of active and low‐cost electrocatalysts for its two half reactions: H₂ and O₂ evolution reactions (HER and OER). Herein, we report that cobalt‐phosphorous‐derived films (Co‐P) can act as bifunctional catalysts for overall water splitting. The as‐prepared Co‐P films exhibited remarkable catalytic performance for both HER and OER in alkaline media, with a current density of 10 mA cm^?2 at overpotentials of ?94 mV for HER and 345 mV for OER and Tafel slopes of 42 and 47 mV/dec, respectively. They can be employed as catalysts on both anode and cathode for overall water splitting with 100 % Faradaic efficiency, rivalling the integrated performance of Pt and IrO₂. The major composition of the as‐prepared and post‐HER films are metallic cobalt and cobalt phosphide, which partially evolved to cobalt oxide during OER.     

Ultrafine Molybdenum Carbide Nanoparticles Composited with Carbon as a Highly Active Hydrogen‐Evolution Electrocatalyst

The replacement of platinum with non‐precious‐metal electrocatalysts with high efficiency and superior stability for the hydrogen‐evolution reaction (HER) remains a great challenge. Herein, we report the one‐step synthesis of uniform, ultrafine molybdenum carbide (Mo₂C) nanoparticles (NPs) within a carbon matrix from inexpensive starting materials (dicyanamide and ammonium molybdate). The optimized catalyst consisting of Mo₂C NPs with sizes lower than 3 nm encapsulated by ultrathin graphene shells (ca. 1–3 layers) showed superior HER activity in acidic media, with a very low onset potential of ?6 mV, a small Tafel slope of 41 mV dec^?1, and a large exchange current density of 0.179 mA cm^?2, as well as good stability during operation for 12 h. These excellent properties are similar to those of state‐of‐the‐art 20 % Pt/C and make the catalyst one of the most active acid‐stable electrocatalysts ever reported for HER.