Pnictogen (As,Sb, Bi) Nanosheets for Electrochemical Applications Are Produced by Shear Exfoliation Using Kitchen Blenders

Layered materials are of high importance because of their anisotropy and as a source of 2D materials. Whilst there is a plethora of multi‐elemental 2D materials, the number mono‐elemental 2D materials is rather limited. Herein, we demonstrate that aqueous shear exfoliation can be used to obtain As, Sb, and Bi exfoliated nanosheets. Morphological and chemical characterization of the exfoliated materials shows a decrease in thickness, sheet‐to‐nanosheet scale, and partial oxidation owing to a higher surface area. The electrochemical performance is tested in terms of inherent electrochemistry, electron transfer, and sensing applications as demonstrated with ascorbic acid. Potential energy‐related applications are evaluated in the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR), with shear‐exfoliated Sb having the best electrochemical performance overall. These findings will have a profound impact on the preparation and application of 2D mono‐elemental materials.     

Towards Antimonene and 2D Antimony Telluride through Electrochemical Exfoliation

Two-dimensional (2D) layered antimony (Sb) and antimony telluride (Sb₂Te₃) are two valuable materials for optoelectronic devices and thermoelectric applications. Preparing high-quality sheets of these materials is the initial phase to promote their expected issues. Herein, micrometer-sized few-to-multilayered sheets of Sb and Sb₂Te₃ have been obtained by electrochemical exfoliation. The layered rhombohedral Sb was exfoliated in Na₂SO₄ and Li₂SO₄ electrolytes by anodic–cationic intercalation, and Sb₂Te₃ was exfoliated in Na₂SO₄. These findings are important contributions for the solution-based room-temperature electrochemical exfoliation, which is stable under glove-box-free conditions, to further improve the production of high-quality exfoliated sheets.     

Phosphorene-Based Electrocatalysts

Phosphorene, generally defined as two-dimensional (2D) black phosphorus (BP) with monolayered or few-layered structure, has emerged as a promising member of the family of 2D materials. Since its discovery in 2014, extensive research has been focused on broadening its applications, covering the biological, photoelectric, and electrochemical fields, owing to the unique physicochemical and structural properties. As a single-elemental material, phosphorene has demonstrated its applicability for the preparation of efficient electrocatalysts for hydrogen evolution reaction (HER), oxygen evolution reaction (OER), nitrogen reduction reaction (NRR), and other electrocatalytic applications. In this Minireview, a summary of the very recent research progresses of phosphorene in electrocatalysis is offered, with a special focus on the effective synthetic strategies towards performance improvement. In the concluding section, challenges and perspectives are also discussed.     

缺陷位工程在二维材料电催化析氢反应中的研究进展

面对不可再生资源的快速消耗和环境污染的日益加重,寻找清洁可再生能源势在必行.氢能是一种清洁可再生的能源,是目前最有希望替代化石燃料的一种能源.电化学水分解可用来产生高纯氢气,其中析氢催化剂起着至关重要的作用.尽管贵金属铂基催化剂表现出优异的析氢性能,然而稀缺性和高成本限制了其大规模应用.因此,开发高效和地球存量丰富的电...     

Metal-organic framework membranes: From synthesis to electrocatalytic applications

Metal-organic frameworks (MOFs), as an emerging family of porous inorganic-organic crystal materials, exhibit widely applications in gas storage and separation, drug release, sensing, and catalysis, owing to easily adjustable pore sizes, uniformly distributed metal centers, high surface areas, and tunable functionalities. However, MOF crystal powders are usually difficult to be directly applied into specific devices because of their brittleness, insolubility and low compatibility. Therefore, to expand versatile MOF membranes with robustness and operational flexibility is urgent to satisfy practical applications. Although numerous reports have reviewed the synthesis and applications of MOF membranes, relatively few reports the electrocatalytic properties based on MOF membranes. Herein, this mini-review provides an overview of preparation of MOF membranes, including directed synthesis, secondary growth and electrochemical deposition method. Meanwhile, fabrication of ultrathin 2D MOF nanosheets those can be also defined as a kind of nanoscale MOF membranes is also mentioned. Electrocatalytic performance of oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER) and CO₂ reduction reaction (CO₂RR) for diverse MOF membranes/nanosheets and their derivatives are introduced.     

Coordination‐Directed Growth of Transition‐Metal–Crystalline‐Carbon Composites with Controllable Metal Composition

Transition‐metal–carbon (CTM) composites show ample activity in many catalytic reactions. However, control of composition, distribution, and properties is challenging. Now, a straightforward path for the synthesis of transition‐metal nanoparticles engulfed in crystalline carbon is presented with excellent control over the metal composition, amount, ratio, and catalytic properties. This approach uses molten monomers that coordinate metals ions at high temperature. At high temperatures, strong coordination bonds direct the growth of carbon material with homogeneous metals distribution and with negligible losses, owing to the liquid‐like reaction compared to the traditional solid‐state reaction. The strength of the approach is demonstrated by the synthesis of mono, binary, and trinary transition‐metal–crystalline‐carbon composites with tunable and precise elemental composition as well as good electrochemical properties as oxygen evolution reaction electrocatalysts.     

Oxidized Carbon Nitrides: Water‐Dispersible,Atomically Thin Carbon Nitride‐Based Nanodots and Their Performances as Bioimaging Probes

Three‐dimensional (3D) carbon nitride (C₃N₄)‐based materials show excellent performance in a wide range of applications because of their suitable band structures. To realize the great promise of two‐dimensional (2D) allotropes of various 3D materials, it is highly important to develop routes for the production of 2D C₃N₄ materials, which are one‐atom thick, in order to understand their intrinsic properties and identify their possible applications. In this work, water‐dispersible, atomically thin, and small carbon nitride nanodots were produced using the chemical oxidation of graphitic C₃N₄. Various analyses, including X‐ray diffraction, X‐ray photoelectron, Fourier‐transform infrared spectroscopy, and combustion‐based elemental analysis, and thermogravimetric analysis, confirmed the production of 3D oxidized C₃N₄ materials. The 2D C₃N₄ nanodots were successfully exfoliated as individual single layers; their lateral dimension was several tens of nanometers. They showed strong photoluminescence in the visible region as well as excellent performances as cell‐imaging probes in an in vitro study using confocal fluorescence microscopy.     

二维金属有机框架纳米片的合成及在超电容和电催化领域的应用

二维金属有机框架(2D MOF)纳米片具有丰富且易暴露的表面活性位点、 高度有序的孔结构以及多样且可调的化学成分, 在电化学能量存储与转化中有利于降低反应电位, 提高扩散速率和反应速率. 关于2D MOF应用于电化学存储与转化的研究已有大量报道. 本文综合评述了近几年2D MOF的合成进展及其在超电容(SC)、 析氧反应(OER)、 析氢反应(HER)、 氧还原反应(ORR)和二氧化碳还原反应(CRR)的应用, 并对2D MOF作为电催化材料的研究现状和发展前景进行了总结与展望.     

Novel Two‐Dimensional Porous Materials for Electrochemical Energy Storage: A Minireview

Two dimensional (2D) porous materials have great potential in electrochemical energy conversion and storage. Over the past five years, our research group has focused on Simple, Mass, Homogeneous and Repeatable Synthesis of various 2D porous materials and their applications for electrochemical energy storage especially for supercapacitors (SCs). During the experimental process, through precisely controlling the experimental parameters, such as reaction species, molar ratio of different ions, concentration, pH value of reaction solution, heating temperature, and reaction time, we have successfully achieved the control of crystal structure, composition, crystallinity, morphology, and size of these 2D porous materials including transition metal oxides (TMOs), transition metal hydroxides (TMHOs), transition metal oxalates (TMOXs), transition metal coordination complexes (TMCCs) and carbon materials, as well as their derivatives and composites. We have also named some of them with CQU‐Chen (CQU is the initialism of Chongqing University, Chen is the last name of Lingyun Chen), such as CQU‐Chen‐Co?O‐1, CQU‐Chen‐Ni?O?H‐1, CQU‐Chen‐Zn?Co?O‐1, CQU‐Chen‐Zn?Co?O‐2, CQU‐Chen‐OA?Co‐2‐1, CQU‐Chen‐Co?OA‐1, CQU‐Chen‐Ni?OA‐1, CQU‐Chen‐Gly?Co‐3‐1, CQU‐Chen‐Gly?Ni‐2‐1, CQU‐Chen‐Gly?Co?Ni‐1, etc. The introduction of 2D porous materials as electrode materials for SCs improves the energy storage performances. These materials provide a large number of active sites for ion adsorption, supply plentiful channels for fast ion transport and boost electrical conductivity and facilitate electron transportation and ion penetration. The unique 2D porous structures review is mainly devoted to the introduction of our contribution in the 2D porous nanostructured materials for SC. Finally, the further directions about the preparation of 2D porous materials and electrochemical energy conversion and storage applications are also included.     

Atomically Thin Arsenene and Antimonene: Semimetal–Semiconductor and Indirect–Direct Band‐Gap Transitions

The typical two‐dimensional (2D) semiconductors MoS₂, MoSe₂, WS₂, WSe₂ and black phosphorus have garnered tremendous interest for their unique electronic, optical, and chemical properties. However, all 2D semiconductors reported thus far feature band gaps that are smaller than 2.0 eV, which has greatly restricted their applications, especially in optoelectronic devices with photoresponse in the blue and UV range. Novel 2D mono‐elemental semiconductors, namely monolayered arsenene and antimonene, with wide band gaps and high stability were now developed based on first‐principles calculations. Interestingly, although As and Sb are typically semimetals in the bulk, they are transformed into indirect semiconductors with band gaps of 2.49 and 2.28 eV when thinned to one atomic layer. Significantly, under small biaxial strain, these materials were transformed from indirect into direct band‐gap semiconductors. Such dramatic changes in the electronic structure could pave the way for transistors with high on/off ratios, optoelectronic devices working under blue or UV light, and mechanical sensors based on new 2D crystals.     

Metal Phosphorous Trichalcogenides (MPCh3): From Synthesis to Contemporary Energy Challenges

Owing to their unique physical and chemical properties, layered two‐dimensional (2D) materials have been established as the most significant topic in materials science for the current decade. This includes layers comprising mono‐element (graphene, phosphorene), di‐element (metal dichalcogenides), and even multi‐element. A distinctive class of 2D layered materials is the metal phosphorous trichalcogenides (MPCh₃, Ch=S, Se), first synthesized in the late 1800s. Having an unusual intercalation behavior, MPCh₃ were intensively studied in the 1970s for their magnetic properties and as secondary electrodes in lithium batteries, but fell from scrutiny until very recently, being 2D nanomaterials. Based on their synthesis and most significant properties, the present surge of reports related to water‐splitting catalysis and energy storage are discussed in detail. This Minireview is intended as a baseline for the anticipated new wave of researchers who aim to explore these 2D layered materials for their electrochemical energy applications.     

A Cost‐Effective 3D Hydrogen Evolution Cathode with High Catalytic Activity: FeP Nanowire Array as the Active Phase

Iron is the cheapest and one of the most abundant transition metals. Natural [FeFe]‐hydrogenases exhibit remarkably high activity in hydrogen evolution, but they suffer from high oxygen sensitivity and difficulty in scale‐up. Herein, an FeP nanowire array was developed on Ti plate (FeP NA/Ti) from its β‐FeOOH NA/Ti precursor through a low‐temperature phosphidation reaction. When applied as self‐supported 3D hydrogen evolution cathode, the FeP NA/Ti electrode shows exceptionally high catalytic activity and good durability, and it only requires overpotentials of 55 and 127 mV to afford current densities of 10 and 100 mA cm², respectively. The excellent electrocatalytic performance is promising for applications as non‐noble‐metal HER catalyst with a high performance–price ratio in electrochemical water splitting for large‐scale hydrogen fuel production.     

二维纳米片层孔洞化策略及组装材料在超级电容器中的应用

功率密度高、倍率性能优异和循环性能好等特性使得超级电容器在储能领域显示了巨大的应用前景。尽管二维层状材料剥离形成的纳米片层不仅可为电化学反应提供独特的纳米级反应空间,而且由其组装的层状纳米电极材料具有化学和结构上的氧化还原可逆性及纳米片层水平方向上离子或电子快速传输通道。但是,纳米片层组装电极材料在纳米片层垂直方向上离子或电子传输存在障碍,对于超级电容器功率密度和能量密度的提高及实现快速能量储存非常不利。因此,如何通过改善离子或电子的快速传输,实现超级电容器大功率密度下的高能量密度是超级电容器电极材料发展的方向之一。本文主要综述了二维层状材料剥离成纳米片层,纳米片层孔洞化策略及组装孔洞化材料在超级电容器电极材料中的应用。纳米层孔洞化技术是改善层状电极材料在纳米片层垂直方向离子或电子传输的有效手段,为实现高比电容下的高倍率性能超级电容器电极材料制备提供了方法学。最后,对开发大功率密度下的高能量密度超级电容器电极材料提出了展望。     

Misfit‐Layered Bi1.85Sr2Co1.85O7.7−δ for the Hydrogen Evolution Reaction: Beyond van der Waals Heterostructures

Recent research on stable 2D nanomaterials has led to the discovery of new materials for energy‐conversion and energy‐storage applications. A class of layered heterostructures known as misfit‐layered chalcogenides consists of well‐defined atomic layers and has previously been applied as thermoelectric materials for use as high‐temperature thermoelectric batteries. The performance of such misfit‐layered chalcogenides in electrochemical applications, specifically the hydrogen evolution reaction, is currently unexplored. Herein, a misfit‐layered chalcogenide consisting of CoO₂ layers interleaved with an SrO–BiO–BiO–SrO rock‐salt block and having the formula Bi_1.85Sr₂Co_1.85O_7.7?δ is synthesized and examined for its structural and electrochemical properties. The hydrogen‐evolution performance of misfit‐layered Bi_1.85Sr₂Co_1.85O_7.7?δ, which has an overpotential of 589 mV and a Tafel slope of 51 mV per decade, demonstrates the promising potential of misfit‐layered chalcogenides as electrocatalysts instead of classical carbon.     

Pnictogen‐Based Enzymatic Phenol Biosensors: Phosphorene,Arsenene, Antimonene,and Bismuthene

Two‐dimensional materials have allowed for great advances in the biosensors field and to obtain sophisticated, smart, and miniaturized devices. In this work, we optimized a highly sensitive and selective phenol biosensor using 2D pnictogens (phosphorene, arsenene, antimonene, and bismuthene) as sensing platforms. Exfoliated pnictogen were obtained by the shear‐force method, undergoing delamination and downsizing to thin nanosheets. Interestingly, compared with the other tested elements, antimonene exhibited the highest degree of exfoliation and the lowest oxidation‐to‐bulk ratio, to which we attribute its enhanced performance in the phenol biosensor system reported here. The proposed design represents the first biosensor approach developed using exfoliated pnictogens beyond phosphorene.     

Pnictogen‐Based Enzymatic Phenol Biosensors: Phosphorene,Arsenene, Antimonene,and Bismuthene

Two‐dimensional materials have allowed for great advances in the biosensors field and to obtain sophisticated, smart, and miniaturized devices. In this work, we optimized a highly sensitive and selective phenol biosensor using 2D pnictogens (phosphorene, arsenene, antimonene, and bismuthene) as sensing platforms. Exfoliated pnictogen were obtained by the shear‐force method, undergoing delamination and downsizing to thin nanosheets. Interestingly, compared with the other tested elements, antimonene exhibited the highest degree of exfoliation and the lowest oxidation‐to‐bulk ratio, to which we attribute its enhanced performance in the phenol biosensor system reported here. The proposed design represents the first biosensor approach developed using exfoliated pnictogens beyond phosphorene.     

Single‐Atom Electrocatalysts

Recent years have witnessed a dramatic increase in the production of sustainable and renewable energy. However, the electrochemical performances of the various systems are limited, and there is an intensive search for highly efficient electrocatalysts by more rational control over the size, shape, composition, and structure. Of particular interest are the studies on single‐atom catalysts (SACs), which have sparked new interests in electrocatalysis because of their high catalytic activity, stability, selectivity, and 100 % atom utilization. In this Review, we introduce innovative syntheses and characterization techniques for SACs, with a focus on their electrochemical applications in the oxygen reduction/evolution reaction, hydrogen evolution reaction, and hydrocarbon conversion reactions for fuel cells (electrooxidation of methanol, ethanol, and formic acid). The electrocatalytic performance is further considered at an atomic level and the underlying mechanisms are discussed. The ultimate goal is the tailoring of single atoms for electrochemical applications.     

Synergistic Effect between Metal–Nitrogen–Carbon Sheets and NiO Nanoparticles for Enhanced Electrochemical Water‐Oxidation Performance

Identifying effective means to improve the electrochemical performance of oxygen‐evolution catalysts represents a significant challenge in several emerging renewable energy technologies. Herein, we consider metal–nitrogen–carbon sheets which are commonly used for catalyzing the oxygen‐reduction reaction (ORR), as the support to load NiO nanoparticles for the oxygen‐evolution reaction (OER). FeNC sheets, as the advanced supports, synergistically promote the NiO nanocatalysts to exhibit superior performance in alkaline media, which is confirmed by experimental observations and density functional theory (DFT) calculations. Our findings show the advantages in considering the support effect for designing highly active, durable, and cost‐effective OER electrocatalysts.     

Recent Advances in Two-dimensional Materials for Electrochemical Energy Storage and Conversion

With the increased energy demand,developing renewable and clean energy technologies becomes more and more significant to mitigate climate warming and alleviate the environmental pollution.The key point is design and synthesis of low cost and efficient materials for a wide variety of electrochemical reactions.Over the past ten years,two-dimensional(2D)nanomaterials that graphene represents have been paid much attention as a class of the most promising candidates for heterogeneous electrocatalysts in electrochemical storage and conversion.Their unique properties,such as good chemical stability,good flexibility,and good electronic properties,along with their nanosized thickness and large specific area,make them exhibit comprehensively good performances for energy storage and conversion.Here,we present an overview on the recent advances in electrochemical applications of graphene,graphdiyne,transition metal dichalcogenides(TMDs),and MXenes for supercapacitors(SCs),oxygen reduction reaction(ORR),and hydrogen evolution reaction(HER).     

A Redox‐Active 2D Metal–Organic Framework for Efficient Lithium Storage with Extraordinary High Capacity

Metal–organic framework cathodes usually exhibit low capacity and poor electrochemical performance for Li‐ion storage owing to intrinsic low conductivity and inferior redox activity. Now a redox‐active 2D copper–benzoquinoid (Cu‐THQ) MOF has been synthesized by a simple solvothermal method. The abundant porosity and intrinsic redox character endow the 2D Cu‐THQ MOF with promising electrochemical activity. Superior performance is achieved as a Li‐ion battery cathode with a high reversible capacity (387 mA h g^?1), large specific energy density (775 Wh kg^?1), and good cycling stability. The reaction mechanism is unveiled by comprehensive spectroscopic techniques: a three‐electron redox reaction per coordination unit and one‐electron redox reaction per copper ion mechanism is demonstrated. This elucidatory understanding sheds new light on future rational design of high‐performance MOF‐based cathode materials for efficient energy storage and conversion.