A Supramolecular Strategy for Self‐Mobile Adsorption Sites in Affinity Membrane

Disclosed here is the design of a novel supramolecular membrane with self‐mobile adsorption sites for biomolecules purification. In the 3D micropore channels of membrane matrix, the ligands are conjugated onto the cyclic compounds in polyrotaxanes for protein adsorption. During membrane filtration, the adsorption sites can rotate and/or slide along the axial chain, which results in the enhanced adsorption capacity. The excellent performance of supra­molecular membrane is related with the dynamic working manner of adsorption sites, which plays a crucial role on avoiding spatial mismatching and short‐circuit effect. The supra­molecular strategy described here has general suggestions for the “sites” involved technologies such as catalysis, adsorption, and sensors, which is of broad interest.

     

pH‐Switchable Self‐Assembled Materials

Self‐assembled materials, which are able to respond to external stimuli, have been extensively studied over the last decades. A particularly exciting stimulus for a wide range of biomedical applications is the pH value of aqueous solutions, since deprotonation‐protonation events are crucial for structural and functional properties of biopolymers. In living cells and tissues, intra‐ and extracellular pH values are stringently regulated, but can deviate from pH neutral as observed for example in tumorous, inflammatory sites, in endocytic pathways, and specific cellular compartments. By using a pH‐switch as a stimulus, it is thereby possible to address specific targets in order to cause a programmed response of the supramolecular material. This strategy has not only been successfully applied in fundamental research but also in clinical studies. In this feature article, current strategies that have been used in order to design materials with pH‐responsive properties are illustrated. This discussion only addresses selected examples from the last four years, the self‐assembly of polymer‐based building blocks, assemblies emerging from small molecules including surfactants or derived from biological macromolecules, and finally the controlled self‐assembly of oligopeptides.

     

Nanostructured Micelle Nanotubes Self‐Assembled from Dinucleobase Monomers in Water

Despite the central importance of aqueous amphiphile assemblies in science and industry, the size and shape of these nano‐objects is often difficult to control with accuracy owing to the non‐directional nature of the hydrophobic interactions that sustain them. Here, using a bioinspired strategy that consists of programming an amphiphile with shielded directional Watson–Crick hydrogen‐bonding functions, its self‐assembly in water was guided toward a novel family of chiral micelle nanotubes with partially filled lipophilic pores of about 2 nm in diameter. Moreover, these tailored nanotubes are successfully demonstrated to extract and host molecules that are complementary in size and chemical affinity.     

Squalyl Crown Ether Self‐Assembled Conjugates: An Example of Highly Selective Artificial K+ Channels

The natural KcsA K⁺ channel, one of the best‐characterized biological pore structures, conducts K⁺ cations at high rates while excluding Na⁺ cations. The KcsA K⁺ channel is of primordial inspiration for the design of artificial channels. Important progress in improving conduction activity and K⁺/Na⁺ selectivity has been achieved with artificial ion‐channel systems. However, simple artificial systems exhibiting K⁺/Na⁺ selectivity and mimicking the biofunctions of the KcsA K⁺ channel are unknown. Herein, an artificial ion channel formed by H‐bonded stacks of squalyl crown ethers, in which K⁺ conduction is highly preferred to Na⁺ conduction, is reported. The K⁺‐channel behavior is interpreted as arising from discreet stacks of dimers resulting in the formation of oligomeric channels, in which transport of cations occurs through macrocycles mixed with dimeric carriers undergoing dynamic exchange within the bilayer membrane. The present highly K⁺‐selective macrocyclic channel can be regarded as a biomimetic alternative to the KcsA channel.     

Biomimetic Strain‐Stiffening Self‐Assembled Hydrogels

Supramolecular structures with strain‐stiffening properties are ubiquitous in nature but remain rare in the lab. Herein, we report on strain‐stiffening supramolecular hydrogels that are entirely produced through the self‐assembly of synthetic molecular gelators. The involved gelators self‐assemble into semi‐flexible fibers, which thereby crosslink into hydrogels. Interestingly, these hydrogels are capable of stiffening in response to applied stress, resembling biological intermediate filaments system. Furthermore, strain‐stiffening hydrogel networks embedded with liposomes are constructed through orthogonal self‐assembly of gelators and phospholipids, mimicking biological tissues in both architecture and mechanical properties. This work furthers the development of biomimetic soft materials with mechanical responsiveness and presents potentially enticing applications in diverse fields, such as tissue engineering, artificial life, and strain sensors.     

A POSS‐Phosphazene Based Porous Material for Adsorption of Metal Ions from Water

The development of adsorptive materials continues to be an important area of research for removal of heavy metal ions from waste water. The adsorption capacity can be modulated by both physical and chemical modification of the adsorbent. Herein, we combine the unique properties of polyhedral oligomeric silsesquioxane (POSS) and organocyclophosphazene as the building units to synthesize a hybrid porous material, abbreviated as PN‐POSS. The synthetic method follows a Heck reaction between hexa(4‐bromophenoxy)cyclotriphosphazene and octavinylsilsesquioxane (OVS). The Brunauer–Emmett–Teller (BET) analysis shows that the material possesses micro‐ and mesopores of 1.5 and 3.8 nm size and a surface area on the order of 500 m² g^?1. These attributes in combination with the donor ability of the phosphazene units qualify the material for high adsorption of Pb²⁺, Hg²⁺ and Cu²⁺ ions with maximal adsorption capacities on the order of 1326, 1927 and 2654 mg g^?1, respectively. The adsorbent exhibits a good regeneration performance and can be effectively used for water treatment.     

Selective Lanthanides Sequestration Based on a Self‐Assembled Organosilica

In this paper, we investigate the cation‐exchange properties of a self‐assembled hybrid material towards trivalent ions, lanthanides (La³⁺, Eu³⁺, Gd³⁺, Yb³⁺) and Fe³⁺. The bis‐zwitterionic lamellar material was prepared by sol–gel process from only 3‐aminopropyltriethoxysilane (APTES), succinic anhydride, and ethylenediamine. In ethanol heated under reflux, the exchange ethylenediammonium versus Ln³⁺ proved to be complete by complexometry measurements and elemental analyses, one Cl^? ion per one Ln^III remaining as expected for charge balance. In aqueous solution at 20 °C, the material was found to be selective towards lanthanide in spite of the similarity of their ionic radii. The cation uptake depends on the nature of the salt, the difference between two lanthanides reaching up to 20 % in some cases. Finally, ion‐exchange reaction with FeCl₃ was chosen as a probe to get more information on the material after incorporation of trivalent ions. Based on Mössbauer spectroscopic investigations on the resulting material in conjunction with the XRD analysis of materials containing trivalent ions, a structural model was proposed to describe the incorporation of trivalent ions by exchange reaction within the original zwitterionic material.     

Self‐Assembled Fluorescent Organic Nanoparticles for Live‐Cell Imaging

Fluorescent, cell‐permeable, organic nanoparticles based on self‐assembled π‐conjugated oligomers with high absorption cross‐sections and high quantum yields have been developed. The nanoparticles are generated with a tuneable density of amino groups for charge‐mediated cellular uptake by a straightforward self‐assembly protocol, which allows for control over size and toxicity. The results show that a single amino group per ten oligomers is sufficient to achieve cellular uptake. The non‐toxic nanoparticles are suitable for both one‐ and two‐photon cellular imaging and flow cytometry, and undergo very efficient cellular uptake.     

Self‐Assembled Vesicles with Functionalized Membranes

Biological membranes play a key role for the function of living organisms. Thus, many artificial systems have been designed to mimic natural cell membranes and their functions. A useful concept for the preparation of functional membranes is the embedding of synthetic amphiphiles into vesicular bilayers. The dynamic nature of such noncovalent assemblies allows the rapid and simple development of bio‐inspired responsive nanomaterials, which find applications in molecular recognition, sensing or catalysis. However, the complexity that can be achieved in artificial functionalized membranes is still rather limited and the control of their dynamic properties and the analysis of membrane structures down to the molecular level remain challenging.     

Self‐Assembled Dipeptide Aerogels with Tunable Wettability

Constructing supramolecular materials with tunable properties and functions is a great challenge due to the complex competition between multiple assembly pathways. Herein, we report that dipeptides can self‐assemble into aerogels with entirely different surface wettability through precisely controlling the assembly pathways. Charged groups or aromatic residues are selectively exposed on the surface of their nanoscale building blocks which results either in a superhydrophilic or highly hydrophobic surface. With this special property, single component dipeptide aerogels can play diverse roles in medical care applications. This study suggests great promise in the synthesis of supramolecular materials with different targeted functions from the same molecular unit.     

Transition‐Metal‐Ion‐Mediated Polymerization of Dopamine: Mussel‐Inspired Approach for the Facile Synthesis of Robust Transition‐Metal Nanoparticle–Graphene Hybrids

Inspired by the high transition‐metal‐ion content in mussel glues, and the cross‐linking and mechanical reinforcement effects of some transition‐metal ions in mussel threads, high concentrations of nickel(II), cobalt(II), and manganese(II) ions have been purposely introduced into the reaction system for dopamine polymerization. Kinetics studies were conducted for the Ni²⁺–dopamine system to investigate the polymerization mechanism. The results show that the Ni²⁺ ions could accelerate the assembly of dopamine oligomers in the polymerization process. Spectroscopic and electron microscopic studies reveal that the Ni²⁺ ions are chelated with polydopamine (PDA) units, forming homogeneous Ni²⁺–PDA complexes. This facile one‐pot approach is utilized to construct transition‐metal‐ion–PDA complex thin coatings on graphene oxide, which can be carbonized to produce robust hybrid nanosheets with well‐dispersed metallic nickel/metallic cobalt/manganese(II) oxide nanoparticles embedded in PDA‐derived thin graphitic carbon layers. The nickel–graphene hybrid prepared by using this approach shows good catalytic properties and recyclability for the reduction of p ‐ nitrophenol.     

Orthogonally Self‐Assembled Multifunctional Block Copolymers

We report the synthesis of telechelic poly(norbornene) and poly(cyclooctene) homopolymers by ring‐opening metathesis polymerization (ROMP) and their subsequent functionalization and block copolymer formation based on noncovalent interactions. Whereas all the poly(norbornene)s contain either a metal complex or a hydrogen‐bonding moiety along the polymer side‐chains, together with a single hydrogen‐bonding‐based molecular recognition moiety at one terminal end of the polymer chain. These homopolymers allow for the formation of side‐chain‐functionalized AB and ABA block copolymers through self‐assembly. The orthogonal natures of all side‐ and main‐chain self‐assembly events were demonstrated by ¹H NMR spectroscopy and isothermal titration calorimetry. The resulting fully functionalized block copolymers are the first copolymers combining both side‐ and main‐chain self‐assembly, thereby providing a high degree of control over copolymer functionalization and architecture and bringing synthetic materials one step closer to the dynamic self‐assembly structures found in nature.     

High‐Performance Polymers for Membrane CO2/N2 Separation

This Concept examines strategies to design advanced polymers with high CO₂ permeability and high CO₂/N₂ selectivity, which are the key to the success of membrane technology for CO₂ capture from fossil fuel‐fired power plants. Specifically, polymers with enhanced CO₂ solubility and thus CO₂/N₂ selectivity are designed by incorporating CO₂‐philic groups in polymers such as poly(ethylene oxide)‐containing polymers and poly(ionic liquids); polymers with enhanced CO₂ diffusivity and thus CO₂ permeability are designed with contorted rigid polymer chains to obtain high free volume, such as polymers with intrinsic microporosity and thermally rearranged polymers. The underlying rationales for materials design are discussed and polymers with promising CO₂/N₂ separation properties for CO₂ capture from flue gas are highlighted.     

Advantages of Catalysis in Self‐Assembled Molecular Capsules

Control over the local chemical environment of a molecule can be achieved by encapsulation in supramolecular host systems. In supramolecular catalysis, this control is used to gain advantages over classical homogeneous catalysis in bulk solution. Two of the main advantages concern influencing reactions in terms of substrate and product selectivity. Due to size and/or shape recognition, substrate selective conversion can be realized. Additionally, noncovalent interactions with the host environment facilitate alternative reaction pathways and can yield unusual products. This Concept article discusses and highlights literature examples utilizing self‐assembled molecular capsules to achieve catalytic transformations displaying a high degree of substrate and/or product selectivity. Furthermore, the advantage of supramolecular hosts in multicatalyst tandem reactions is covered.     

Dual Stimuli‐Responsive Self‐Assembled Supramolecular Nanoparticles

Supramolecular nanoparticles (SNPs) encompass multiple copies of different building blocks brought together by specific noncovalent interactions. The inherently multivalent nature of these systems allows control of their size as well as their assembly and disassembly, thus promising potential as biomedical delivery vehicles. Here, dual responsive SNPs have been based on the ternary host–guest complexation between cucurbit[8]uril (CB[8]), a methyl viologen (MV) polymer, and mono‐ and multivalent azobenzene (Azo) functionalized molecules. UV switching of the Azo groups led to fast disruption of the ternary complexes, but to a relatively slow disintegration of the SNPs. Alternating UV and Vis photoisomerization of the Azo groups led to fully reversible SNP disassembly and reassembly. SNPs were only formed with the Azo moieties in the trans and the MV units in the oxidized states, respectively, thus constituting a supramolecular AND logic gate.     

Selective Interaction of Dopamine with the Self‐Assembled Fibrillar Network of a Molecular Hydrogel Revealed by STD‐NMR

A molecular hydrogel formed by a derivative of L ‐valine with pendant isonicotinoyl moieties interacts selectively with protonated dopamine in the presence of related compounds such as 3‐methylcatechol, and protonated or neutral phenethylamine. A two‐point interaction with the gel fibers is postulated to explain the results. The conclusions are obtained from nuclear magnetic resonance saturation transfer experiments (STD‐NMR), illustrating how this technique is perfectly suited to monitor the interaction of substrates with the fibrillar network of a molecular gel.