Functionalized graphene oxide supported copper (I) complex as effective and recyclable nanocatalyst for one‐pot three component synthesis of 1,2,3‐triazoles

Efficient, one pot three‐component reaction of alkyl halides, sodium azide with terminal alkynes can be catalyzed by functionalized graphene oxide with copper(I) under thermal conditions. A series of 1,4‐disubstituted 1,2,3‐triazoles were obtained by this one‐pot strategy. The catalyst was prepared and characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), emission scanning electron microscopy (FE‐SEM) and energy dispersive X‐ray (EDX). The catalyst can be reused at least five times without significant deactivation.     

Copper(I) complex covalently anchored on graphene oxide as an efficient and recyclable catalyst for Sonogashira reaction

In this study, the organosilane‐functionalized graphene oxide as a stabilizer was prepared by a facile one‐step silylation approach. [Cu(PPh₃)₃Cl] complex was successfully immobilized onto the graphene oxide surface through coordination interaction with organosilane ligand spacers. The supported catalyst showed enhanced catalytic performance toward Sonogashira reaction of aryl halides with phenylacetylene in water solvent compared with the homogeneous analogues, and it could be readily recycled and reused several times without discernible loss of its activity.     

Copper(II) complex intercalated graphene oxide nanocomposites as versatile,reusable catalysts for click reaction

In this work, we report the efficient, high stable copper(II) complexes intercalated graphene oxide (GO) used as green catalysts for copper(II) complex mediated click reaction. Copper(II) Bis(2,2′-bipyridine) [Cu^II (bpy)₂] (C1) and Copper(II) Bis(1,10-phenanthroline) [Cu^II (phen)₂] (C2) have synthesized for the intercalation of corresponding nanocomposites with GO, [GO@Cu^II (bpy)₂] (GO-C1) and [GO@Cu^II (phen)₂] (GO-C2). The noncovalent interaction of complexes supported on the surface of the GO nanosheets proves as an evident active site to facilitate the enhanced catalytic activity of copper-catalyzed alkyne azide cycloaddition (Cu^IIAAC) reaction for the isolation of 1,4-disubstituted-1,2,3-triazoles as click products in shorter reaction time with 80%–91% yield (five examples). The X-ray diffraction (XRD) pattern of these composites shows the enhanced interlayers d-spacing range of 1.01–1.12 nm due to the intercalation of copper(II) complexes in between the GO basal planes and characterized by X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR), Raman, UV, scanning electron microscope (SEM), and thermogravimetric analysis (TGA). The as-prepared nanocomposites were employed for the typical click reactions using the substrates of azide and acetylene. These classes of composite materials can be referred to recyclable, heterogeneous, green catalysts with high atom economy and could also be used for the isolation of click products in biomolecules.     

Reduced graphene oxide as a recyclable catalyst for dehydrogenation of hydrazo compounds

Reduced graphene oxide served as a reusable and efficient carbocatalyst for aerobic oxidative dehydrogenation of hydrazo compounds. Azo compounds were obtained in high yields under mild reaction conditions.     

Manganese oxide nanoparticles supported on graphene oxide as an efficient nanocatalyst for the synthesis of 1,2,4-oxadiazoles from aldehydes

The easy synthesis of graphene oxide (GO)-supported manganese dioxide (MnO₂) nanoparticles as a stable heterogeneous nanocatalyst (MnO₂@GO) is described. This catalyst was investigated in the synthesis of 1,2,4-oxadiazoles from amidoximes and aldehydes via a cyclization and oxidation process. The nanocomposite was prepared and characterized using various techniques. The catalytic application of the nanocomposite was examined in the reaction of a variety of aldehydes with aliphatic and aromatic amidoximes. The stable and robust catalyst was recycled for seven consecutive runs without a significant decrease in the catalytic activity.     

Catalytic activity of Mn(III) porphyrins supported onto graphene oxide nano-sheets for green oxidation of sulfides

Abstract

In this research, oxidation of various sulfides with urea hydrogen peroxide (UHP) in the presence of manganese porphyrin grafted onto graphene oxide ([Mn(THPP)OAc@GO]) in ethanol was studied. The heterogenized catalyst was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared (FT-IR), and UV–Vis spectroscopy. The amount of Mn-porphyrin loaded on the GO nano-sheets was determined by atomic absorption spectroscopy (AAS) and the thermal stability of the heterogenized catalyst was investigated by thermo-gravimetric analysis (TGA). [Mn(THPP)OAc@GO] was applied for the green oxidation of different sulfides and the solid catalyst can be simply reused several times without losing its catalytic efficiency.     

Copper Schiff base complex immobilized on magnetic graphene oxide: Efficient heterogeneous nanocatalyst for treating environmental pollutants and synthesis of chromenes

Herein, a new Cu(II) Schiff base complex was immobilized onto the magnetic graphene oxide surface through a stepwise procedure. The as-synthesized nanostructure (GO/Fe₃O₄/CuL) was characterized by various techniques including Fourier transform infrared (FT-IR), Raman spectroscopies, scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), energy-dispersive X-ray (EDX) and inductively coupled plasma (ICP) spectroscopies, N₂ adsorption–desorption analysis, vibrating sample magnetometry (VSM), and X-ray diffraction (XRD). The catalytic activity of the synthesized nanocatalyst was examined in 4-nitrophenol (4-NP), Congo red (CR), and methylene blue (MB) reduction using NaBH₄ in an aqueous solution at room temperature. The reaction progress was monitored by UV–Vis spectroscopy. Also, the synthesized nanostructure was evaluated as an efficient catalyst for the synthesis of 2-amino-4H-benzopyrans via three-component reactions of 1-naphthol, malononitrile, and various aldehydes in ethanol/water at 50°C. The use of green solvents, the short reaction time, the high product yield, and easy separation from the reaction environment are the main benefits of this catalytic system. By covalent grafting of the complex on the graphene oxide surface, its catalytic performance significantly increased compared with graphene oxide; this is probably related to the chemical change of the graphene oxide surface. The results show the high chemical stability and the improved reusability of the synthesized nanocatalyst (six times) without significant loss in the catalytic activity of GO/Fe₃O₄/CuL nanocomposite.     

Synthesis of Pd@graphene oxide framework nanocatalyst with enhanced activity in Heck-Mizoroki cross-coupling reaction

A new method was developed for producing a catalyst involving a Pd nanoparticle (NP) embedded in a graphene oxide framework (Pd@GOF) with ordered macro- and mesoporous structures. First, 5,5′-diamino-2,2′-bipyridine was selected as cross-linking for covalent modification of GO nanosheets to prepare a three-dimensional (3D) framework with interlayer spaces in which well-dispersed and ultra-small Pd NPs in situ grew and embedded the framework. The synthesized nanopores 3D Pd@GOF can act as nanoreactors to help the reaction substrates thoroughly come into contact with the surface of Pd NPs, thereby exhibiting high activity toward the Heck reaction, rarely reported concerning Pd NPs supported on one-side functionalized graphene. The Pd@GOF catalyst can be used 10 times without any significant loss in the catalytic activity, confirming the long-term stability of this catalyst. Therefore, the covalently assembled GOF was proposed as a universal platform for hosting noble metal NPs to construct the desired metal@GOF nanocatalyst with improved activity and stability that can be used in a broad range of practical applications.     

Copper immobilized onto polymer‐coated magnetic nanoparticles as recoverable catalyst for ‘click’ reaction

Copper supported on polymer‐coated magnetic nanoparticles was designed and synthesized as a separable heterogeneous catalyst. The catalyst was fully characterized using several techniques such as Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, scanning and transmission electron microscopies, X‐ray diffraction, vibrating sample magnetometry, thermogravimetric analysis and inductively coupled plasma atomic emission spectrometry. All results showed that copper was successfully supported on the polymer‐coated magnetic nanoparticles. Also, results showed that the synthesized material can be used as an efficient catalyst for the preparation of a series of 1,4‐disubstituted 1,2,3‐triazoles from corresponding halides, alkynes and sodium azide. The catalyst can be easily isolated from the reaction solution by applying an external magnet and reused for nine runs without any significant loss of catalytic activity.     

Zirconium (IV) porphyrin graphene oxide: a new and efficient catalyst for the synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones

A covalently cross‐linked graphene oxide (GO) as a catalyst was prepared by a cross‐linking process using the nucleophilic reaction of zirconium (IV)‐coordinated 5,10,15,20‐tetrakis (aminophenyl)porphyrin (ZrPPh) with carboxyl groups of the edges of GO (GO‐ZrPPh). The chemical structure of catalyst was characterized by different analyses such as FT‐IR, SEM, TEM, EDS, ICP, TGA and UV. All analyses confirm the occurrence of successfully covalent immobilization of ZrPPh on the GO. Also, TEM and SEM images show that ZrPPh has been immobilized in the both of the edges and the basal plane of GO. The activity of the catalyst was studied for the synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones via Biginelli reaction. The cross‐linked catalyst is able to catalyze the reaction in short reaction times and good to excellent yields.     

Gold nanoparticles supported on thiol‐functionalized reduced graphene oxide as effective recyclable catalyst for synthesis of tetrahydro‐4H‐chromenes in aqueous media

Gold nanoparticles supported on thiol‐functionalized reduced graphene oxide (AuNPs@RGO‐SH) were found to be a biocompatible, stable, recyclable heterogeneous catalyst. The catalysts were characterized by field emission scanning electron microscopy (FE‐SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT‐IR), thermal gravimetric analysis (TGA), and X‐ray diffraction spectroscopy (XRD). The obtained catalyst was used in synthesis of tetrahydro‐4H‐chromenes in aqueous media with excellent yields. The catalysts could be easily separated from the reaction mixture and recovered several times without a significant loss of activity.     

Heterogenized peroxopolyoxotungstate catalyst on the surface of clicked magnetite‐graphene oxide nanocomposite: Magnetically recoverable epoxidation catalyst

A new heterogeneous catalyst for the epoxidation of olefins was prepared by immobilization of peroxophosphotungstate anions on the surface of clicked magnetite‐graphene oxide as magnetically recoverable support. To prepare the heterogeneous catalyst, the clicked magnetite‐graphene oxide support was prepared by thiolene click reaction of thiol functionalized graphene oxide with vinyl modified magnetite nanoparticles. The tailored support was then modified with aminopropyl groups followed by electrostatic interaction with peroxophosphotungstate anions to achieve the desired heterogeneous catalyst. Characterization of the catalyst was performed by various physicochemical methods which confirmed the successful immobilization of peroxopolyoxotungstate species on the surface of clicked magnetite‐graphene oxide. Catalytic activity of the catalyst revealed its high catalytic activity and selectivity in the epoxidation of various olefins in the presence of H₂O₂ as green oxidant. This heterogeneous catalyst can be magnetically reused several times without significant loss of activity and selectivity.     

氧化石墨烯和石墨烯在催化领域中的应用研究进展

石墨烯具有独特的二维平面结构,其导电性能好,比表面积大,耐酸碱,耐高温.基于石墨烯的优异特性,本文作者从材料的合成和结构等方面对石墨烯基催化剂的研制及其催化性能进行了评述.介绍了石墨烯催化体系的类型和机理,对石墨烯催化中存在的问题进行了简单分析,并对石墨烯在催化领域的应用前景进行了展望.     

Application of biosynthesized palladium nanoparticles (Pd NPs) on Rosa canina fruit extract‐modified graphene oxide as heterogeneous nanocatalyst for cyanation of aryl halides

A green palladium (Pd)‐based catalyst supported on Rosa canina fruit extract‐modified graphene oxide [Pd nanoparticles (NPs)/reduced graphene oxide (RGO)‐Rosa canina] hybrid materials has been used as a recoverable and heterogeneous nanocatalyst for cyanating aryl halides using K₄[Fe (CN)₆] as the resource of cyanide. The nitriles were achieved in good to high yield, and the catalyst can be recovered and reused for up to seven cycles with no remarkable decrease in its catalytic activity.     

Uniformly dispersed copper nanoparticles onto the modified magnetically recoverable nanocatalyst for aqueous synthesis of primary amides

Magnetically recoverable and environmentally friendly Cu‐based heterogeneous catalyst has been synthesized for the one‐pot conversion of aldehydes to their corresponding primary amides. The Fe₃O₄@SiO₂ nanocomposites were prepared by synthesis of Fe₃O₄ magnetic nanoparticles (MNPs) which was then coated with a silica shell via Stöber method. Bi‐functional cysteine amino acid was covalently bonded onto the siliceous shell of nanocatalyst. The Cu^II ions were then loaded onto the modified surface of nanocatalyst. Finally, uniformly dispersed copper nanoparticles were achieved by reduction of Cu^II ions with NaBH₄. Amidation reaction of aryl halides with electron‐withdrawing or electron‐donating groups and hydroxylamine hydrochloride catalyzed with Fe₃O₄@SiO₂@Cysteine‐copper (FSC‐Cu) MNPs in aqueous condition gave an excellent yield of products. The FSC‐Cu MNPs could be easily isolated from the reaction mixture with an external magnet and reused at least 8 times without significant loss in activity.     

Mn(III)‐salan/graphene oxide/magnetite nanocomposite as a highly selective catalyst for aerobic epoxidation of olefins

A nanocomposite was synthesized using carbon‐coated Fe₃O₄ nanoparticle‐decorated reduced graphene oxide as a convenient and efficient supporting material for grafting of a manganese–reduced Schiff base (salan) complex via covalent attachment. The nanocomposite was characterized using X‐ray diffraction, Fourier transform infrared and diffuse reflectance UV–visible spectroscopies, inductively coupled plasma atomic emission spectrometry and scanning electron microscopy. It was evaluated as a catalyst for the aerobic epoxidation of olefins in acetonitrile in combination with a sacrificial co‐reductant (isobutyraldehyde). The catalytic performance of the heterogeneous system of the Mn–salan complex is superior to that of the homogeneous one. The catalyst activity strongly depends on the reaction temperature and nature of the solvent. The epoxide yield increases with the nucleophilic character of the olefin. The nanocomposite performs well as an epoxidation catalyst for electron‐rich and conjugated olefins. It can be recovered from the reaction medium by magnetic decantation and reused, maintaining good catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Sulfonic acid-functionalized Fe3O4-supported magnetized graphene oxide quantum dots: A novel organic-inorganic nanocomposite as an efficient and recyclable nanocatalyst for the synthesis of dihydropyrano[2,3-c]pyrazole and 4H-chromene derivatives

In this research, the main emphasis has been focused on the preparation of a novel Fe₃O₄-supported propane-1-sulfonic acid-grafted graphene oxide quantum dots (Fe₃O₄@GOQD-O-(propane-1-sulfonic acid)) that it was readily synthesized via a five-step procedure as a hitherto unreported magnetic nanocatalyst. This newly prepared Fe₃O₄@GOQD-O-(propane-1-sulfonic acid) nanocomposite was structurally well-established by different analytical techniques including Fourier transform infrared (FT-IR), X-ray diffraction (XRD), energy-dispersive X-ray (EDX), thermal gravimetric analysis (TGA), field emission gun-scanning electron microscope (FESEM), high-resolution transmission electron microscopy (HRTEM) and vibrating sample magnetometer (VSM) analyses. The high catalytic performance of this nanocomposite was exhibited in one-pot synthesis of dihydropyrano[2,3-c]pyrazole and 4H-chromene derivatives under mild conditions. Low reaction times, excellent yields of the products, benignity of the catalyst, easy reaction work-up and magnetic recyclability of the catalyst are the main advantages of the present protocol. Also, our research indicated that the Fe₃O₄@GOQD-O-(propane-1-sulfonic acid) could be reused up to five times without considerable loss of catalytic activity.     

TiO2-coated graphene oxide-molybdate complex as a new separable nanocatalyst for the synthesis of pyrrole derivatives by Paal-Knorr reaction

The preparation of chemical and pharmaceutical compounds through organic reactions has always been associated with the production of environmental waste. Growth population and concerns about ecological pollution increase the interest in using heterogeneous solid catalysts with capabilities such as increasing reaction efficiency and reducing the production of by-products, as well as the ability to separate and reuse. To develop and benefit such catalysts as much as possible, in this study, using graphene oxide (GO) as a support, we succeeded in preparing a heterogeneous catalyst with a high contact surface, excellent performance, and recyclability. Graphene oxide nanosheets were synthesized according to Hummer’s method. hexamolybdate anions ([n-Bu₄N]₂[Mo₆O₁₉]) were placed on this support as a catalytically active site using linkers. The structure of this catalyst was confirmed by XRD, FT-IR, EDS, SEM, TEM, TGA, Raman, and nitrogen adsorption–desorption analyses, and it was used to produce pyrroles by the Paal-Knorr method. The performance of the synthesized nanocatalyst was satisfactory for all the derivatives studied. Recovery and reuse of GO@TiO₂@(CH₂)₃N = Mo[Mo₅O₁₈] after catalytic reactions were examined. This catalyst could be quickly recovered by simple filtration and recycled ten times without significant loss of its catalytic activity.