Synthesis and Reaction of the First 1,2‐Oxaphosphetane Complexes

While P^V 1,2‐oxaphosphetanes are well known from the Wittig reaction, their P^III analogues are still unexplored. Herein, the synthesis and reactions of the first 1,2‐oxaphosphetane complexes are presented, which were achieved by reaction of the phosphinidenoid complex [Li(12‐crown‐4)(solv)][(OC)₅W{(Me₃Si)₂HCPCl}] with different epoxides. The title compounds appeared to be stable in toluene up to 100 °C, before unselective decomposition started. Acid‐induced ring expansion with benzonitrile resulted in selective formation of the first complex bearing a 1,3,4‐oxazaphosphacyclohex‐2‐ene ligand.     

Immobilization of capsaicin onto silica nanoparticle surface and stimulus properties of the capsaicin‐immobilized silica

To prepare silica nanoparticle having biorepellent activity, the immobilization of capsaicin onto hyperbranched poly(amidoamine) (PAMAM)‐grafted silica was investigated. Grafting of PAMAM onto a silica surface was achieved in a solvent‐free dry system using PAMAM dendrimer synthesis methodology. The immobilization of capsaicin was achieved by the reaction of hydroxyl groups of capsaicin with isocyanate groups of Silica‐PAMAM, which were introduced by the reaction of terminal amino groups of Silica‐PAMAM with hexamethylene diisocyanate. The immobilization of capsaicin was confirmed by thermal decomposition GC‐MS. The amount of capsaicin immobilized onto PAMAM‐grafted silica was determined to be 0.10 mmol/g. Capsaicin‐immobilized Silica‐PAMAM (Silica‐PAMAM‐Cap) was dispersed uniformly in water and Tyrode solution. Stimulus activity of Silica‐PAMAM‐Cap was estimated using two stimulus tests, that is a magnus test and a paw licking test, to sensory nerve of mice. As the result of magnus test, it was found that the Silica‐PAMAM‐Cap shows stimulus activity. It was found that elution of capsaicin could be depressed by immobilizing capsaicin onto Silica‐PAMAM from the result of paw licking test. In addition, the stimulus property of Silica‐PAMAM‐Cap to the human skin could be observed and it was found that Silica‐PAMAM‐Cap had acrid taste. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1800–1805, 2010     

HIPE Polymerization Materials Functionalized with Iodic‐BODIPY on the Surface as Porous Heterogeneous Visible‐Light Photocatalysts

A high internal phase emulsion polymerization (PolyHIPE) material, with iodine‐functionalized boron‐dipyrromethene (iodic‐BODIPY) immobilized on its surface, composes a porous heterogeneous organic photocatalyst (iodic‐BODIPY‐PolyHIPE). It shows high catalytic efficiency on the selective oxidation reaction of aromatic sulfides under visible light. The substrates were almost fully converted to their corresponding sulfoxides and no sulfones were observed. Most importantly, iodic‐BODIPY‐PolyHIPE shows >1.6‐fold reaction rate compared to the previous non‐inorganic heterogeneous photocatalysts.     

Oxidation of catecholamines on chitosan-immobilized Co(II) salen complexes

L-Adrenaline and 3,4-dihydroxyphenylalanine (dopa) oxidation by molecular oxygen in the presence of the Co(II) complex of bis(salicylideneethylene diamine) (CoSalen) immobilized on unmodified chitosan and chitosan modified by 4-pyridinecarboxaldehyde is studied in aqueous solutions under mild conditions. The catalysts prepared are selective with respect to oxidation of the chosen substrates. Preparation of binary composite egg-shell systems, with a thin film of low-loaded CoSalen-chitosan supported on macroporous SiO₂ makes it possible to increase sufficiently the specific surface area and the efficiency of the catalyst.     

Mild and Complete Carbonyl Ligand Scission on a Mononuclear Transition Metal Complex

The complete scission of the carbon–oxygen bond of carbon monoxide, while frequently observed on bulk metals and with bimetallic and cluster transition metal complexes, is unknown with monometallic systems. Reaction of a zerovalent iron bis(borylene) complex with a cyclic (alkyl)(amino)carbene revealed a highly selective intramolecular cleavage of the C?O bond of a carbonyl ligand at room temperature, leading to the formation of a highly unusual iron complex containing a base‐stabilized (bora)alkylideneborane ligand. DFT investigation of the reaction mechanism suggested that the two Lewis acidic borylene boron atoms cooperate to cleave the C?O multiple bond.     

A Convenient One‐Pot Synthesis of Triazolopyridine and Related Heterocycle Fused‐Triazole Analogs Through Copper Catalyzed Oxidative Cyclization Strategy

One‐pot synthesis of heterocycle fused‐triazole analogs from the corresponding aldehydes and heteroarylhydrazines is demonstrated. Transformation of hydrazones to the desired systems was achieved by employing the oxidative cyclization with catalytic CuBr₂ and oxone. This reaction condition is mild and selective, and a wide range of functional groups were able to sustain. An array of biologically important triazolopyridines, triazolopyridazines, triazolopyrimidines, and triazoloquinolines were obtained in fairly good yield.     

Cobalt‐Catalyzed C8‐Dienylation of Quinoline‐N‐Oxides

An efficient Cp*Co^III‐catalyzed C8‐dienylation of quinoline‐N‐oxides was achieved by employing allenes bearing leaving groups at the α‐position as the dienylating agents. The reaction proceeds by Co^III‐catalyzed C?H activation of quinoline‐N‐oxides and regioselective migratory insertion of the allene followed by a β‐oxy elimination, leading to overall dienylation. Site‐selective C?H activation was achieved with excellent selectivity under mild reaction conditions, and 30 mol % of a NaF additive was found to be crucial for the efficient dienylation. The methodology features high stereoselectivity, mild reaction conditions, and good functional‐group tolerance. C8‐alkenylation of quinoline‐N‐oxides was achieved in the case of allenes devoid of leaving groups as coupling partners. Furthermore, gram‐scale preparation and preliminary mechanistic experiments were carried out to gain insights into the reaction mechanism.     

Highly Linear Selective Cobalt‐Catalyzed Addition of Aryl Imines to Styrenes: Reversing Intrinsic Regioselectivity by Ligand Elaboration

Highly linear selective, imine‐directed hydroarylation of styrene has been achieved with cobalt‐based catalytic systems featuring bis(2,4‐dimethoxyphenyl)(phenyl)phosphine and either 2‐methoxypyridine or DBU as a ligand and a Lewis base additive, respectively, thus affording a variety of 1,2‐diarylethanes (bibenzyls) in good yields under mild reaction conditions. The triarylphosphine controls the regioselectivity, while the Lewis base significantly accelerates the reaction. Ligand screening and deuterium‐labeling studies provide implications about the roles of the ligand and the Lewis base in the crucial C? C reductive elimination step.     

Amperometric Biosensor Based on Enzymatic Reactor for Choline Determination in Flow Systems

A simple, selective and stable biosensor with the enzymatic reactor based on choline oxidase (ChOx) was developed and applied for the determination of choline (Ch) in flow injection analysis with amperometric detection. The enzyme ChOx was covalently immobilized with glutaraldehyde to mesoporous silica powder (SBA‐15) previously covered by NH₂‐groups. This powder was found as an optimal filling of the reactor. The detection of Ch is based on amperometric monitoring of consumed oxygen during the enzymatic reaction, which is directly proportional to Ch concentration. Two arrangements of an electrolytic cell in FIA, namely wall‐jet cell with working silver solid amalgam electrode covered by mercury film and flow‐through cell with tubular detector of polished silver solid amalgam were compared. The experimental parameters affecting the sensitivity and stability of the biosensor (i. e. pH of the carrier solution, volume of reactor, amount of the immobilized enzyme, the detection potential, flow rate, etc.) were optimized. Under the optimized conditions, the limit of detection was found to be 9.0×10^?6 mol L^?1. The Michaelis‐Menten constant for covalently immobilized ChOx on SBA‐15 was calculated. The proposed amperometric biosensor with the developed ChOx‐based reactor exhibits good repeatability, reproducibility, long‐term stability, and reusability. Its efficiency has been confirmed by the successful application for the determination of Ch in two commercial pharmaceuticals.     

Enzyme/semiconductor nanoclusters combined systems for novel amperometric biosensors

In this work quantum-sized CdS nanocrystals were synthesized using a quaternary water-in-oil microemulsion and immobilized onto gold working electrode by self-assembled monolayers techniques. Formaldehyde dehydrogenase was covalently immobilized onto a protecting membrane, which was stratified on part of the semiconductor nanoparticles modified electrode. The covalent enzyme immobilization has been required to improve the stability of the catalytic oxidation of formaldehyde, which occurs after light stimulation of the semiconductor through the electron/hole recombination. A study about the best electrochemical oxidation potentials under different flow conditions was performed. Preliminary sensor stability and interferences tests were also carried out, for a sensitive and selective detection of formaldehyde. A detection limit of 41 ppb of formaldehyde was calculated and an operational stability of 6 h was achieved under flow conditions by means of this novel amperometric biosensor based on FDH-semiconductor hybrid systems, not requiring NAD⁺/NADH as charge transfer in the enzymatic reaction.     

Synthesis and enantioseparation behaviors of novel immobilized 3,5‐dimethylphenylcarbamoylated polysaccharide chiral stationary phases

Two new polysaccharide‐derived chiral selectors, namely, 6‐azido‐6‐deoxy‐3,5‐dimethylphenylcarbamoylated amylose and 6‐azido‐6‐deoxy‐3,5‐dimethylphenyl carbamoylated cellulose, were synthesized under homogeneous conditions and immobilized onto aminized silica gel by the Staudinger reaction, resulting in two new immobilized polysaccharide chiral stationary phases (CSPs). Their enantioseparation performances were investigated under normal‐phase mode by HPLC. Among 17 analytes, baseline separations of 12 pairs of enantiomers are achieved on the immobilized cellulose CSP, which demonstrates that this new cellulose material exhibits almost the same enantioseparation performance as the coated cellulose CSP. In addition, the amylose‐derived CSP presents limited enantiorecognition ability but certain complementarity with the immobilized and coated cellulose‐based materials. Neither metolachlor nor paclitaxel side chain acids are separated on two cellulose‐derived CSPs, but effective separations are obtained on the immobilized amylose column.     

Gold(I)‐Catalyzed Desymmetrization of 1,4‐Dienes by an Enantioselective Tandem Alkoxylation/Claisen Rearrangement

An enantioselective alkoxylation/Claisen rearrangement reaction was achieved by a strategic desymmetrization of 1,4‐dienes under the catalysis of (S)‐DTBM‐Segphos(AuCl)₂/AgBF₄. This reaction system was highly selective for the formation of 3,3‐rearrangement products, providing cycloheptenes with various substitutions in good yield and good to excellent enantioselectivity. This transformation was further extended to bicyclic ring substrates, providing the opportunity to easily assemble 5,6‐ and 6,7‐fused ring systems.     

Three‐component polyaddition of diamines,carbon disulfide,and diacrylates in water

The three‐component polyaddition of diamines, carbon disulfide (CS₂), and diacrylates in water was successfully achieved without the use of a surfactant or catalyst. Appropriate reaction conditions (i.e., reaction temperature, reaction time, and CS₂ feed) enabled the polyaddition of 1,3‐di‐4‐piperidylpropane ( 1a ), CS₂, and 1,6‐hexanediol diacrylate ( 2a ) to afford the corresponding poly(dithiourethane‐amine) containing 83% of dithiourethane units in 84% yield. Polyaddition of other monomers also proceeded under the optimum conditions to afford various poly(dithiourethane‐amine)s. Unsuccessful results for polyaddition in organic solvents such as toluene, tetrahydrofuran, and N,N‐dimethylformamide revealed that the polyaddition is accelerated in water. The obtained poly(dithiourethane‐amine)s adsorbed Au (III) efficiently under acidic conditions, due to the strong interaction of the thiocarbonyl sulfur in the dithiourethane unit with Au (III). The poly(dithiourethane‐amine)s also showed selective adsorption for Au (III) from a mixture of metal ions [Au (III), Fe (III), Mn (II), and Zn (II)], which indicates their potential utilization for the collection of gold. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 845–851, 2010     

Multi‐center nature of ethylene polymerization catalysts based on 2,6‐bis(imino)pyridyl complexes of iron and cobalt

2,6‐Bis(imino)pyridyl complexes of Fe and Co in combination with methylalumoxane form very active homogeneous catalytic systems for polymerization of ethylene. GPC analysis of the polymers prepared with the complexes indicates that the Co complexes produce single‐center catalysts whereas the Fe complexes produce catalysts with numerous types of active centers. Different centers in the latter catalyst systems respond differently to reaction conditions such as the reaction duration, the [MAO]:[Fe] ratio, the ethylene concentration, etc. The article examines the effects of reaction variables on the performance of both types of catalysts and proposes an explanation for the complex behavior of the catalysts derived from the Fe complexes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6159–6170, 2006     

Iron phthalocyanine as new efficient catalyst for catalytic transfer hydrogenation of simple aldehydes and ketones

Catalytic transfer hydrogenation (CTH) of various aldehydes and ketones was studied using iron phthalocyanine catalyst, in order to substitute the typically used rare transition metals (Ir, Rh, Ru) with an easily available and less expensive metal. Iron phthalocyanine was found to be an efficient hydrogenation catalyst and its immobilized version was successfully prepared. The immobilized iron phthalocyanine was also active in the CTH reaction of various carbonyl compounds, and it was easy to handle and possible to recycle. Copyright © 2014 John Wiley & Sons, Ltd.     

固载Ru基催化剂上二氧化碳加氢合成甲酸Ⅱ反应条件对催化剂性能的影响

The synthesis of formic acid from carbon dioxide and hydrogen using a silica immobilized ruthenium catalyst as precursor has been studied in different reaction conditions. The results revealed that the TOF （turn over frequency） of HCOOH achieved 1481.5 h^-1 on immobilized ruthenium catalyst near the critical pressure point of CO2 with H2 pressure of 4.0 MPa, reaction temperature of 80℃ and PPh3/Ru molar ratio of 6：1. The reaction activity of immobilized catalyst was higher than that of homogeneous catalyst, and the immobilized catalyst also offered the practical advantages such as easy separation and reuse.     

STUDY ON IMMOBILIZED PORCINE PANCREATIC LIPASE CATALYZING TRANSESTERIFICATION BETWEEN METHYL－BUTYRATE AND 1－BUTANOL IN NONAQUEOUS SYSTEMS

ＳＴＵＤＹＯＮＩＭＭＯＢＩＬＩＺＥＤＰＯＲＣＩＮＥＰＡＮＣＲＥＡＴＩＣＬＩＰＡＳＥＣＡＴＡＬＹＺＩＮＧＴＲＡＮＳＥＳＴＥＲＩＦＩＣＡＴＩＯＮＢＥＴＷＥＥＮＭＥＴＨＹＬ－ＢＵＴＹＲＡＴＥＡＮＤ１－ＢＵＴＡＮＯＬＩＮＮＯＮＡＱＵＥＯＵＳＳＹＳＴＥＭＳＸｉ...     

STUDY ON IMMOBILIZED PORCINE PANCREATIC LIPASE CATALYZING TRANSESTERIFICATION BETWEEN METHYL—BUTYRATE AND 1—BUTANOL IN NONAQUEOUS SYSTEMS

Transesterification between methyl-butyrate and 1-butanol in nonaqueous systems was catalyzed by porcine pancreatic lipase which was immobilized on cross-linked polystyrene.Organic solvents,substrate concentration,contents of water and other parameters which affect the immobilized enzyme activity were studied.Lipase immobilized on hydrophobic crosslinked polystyrene can reduce its diffusion limit in the reaction.It was found that the activity of immobilized lipase in organic systems was two times as high as that of free lipase.     

Heterogeneous Aromatic Amination of Aryl Halides with Arylamines in Water with PS‐PEG Resin‐Supported Palladium Complexes

Catalytic aromatic amination is achieved in water under heterogeneous conditions by the use of immobilized palladium complexes coordinated with the amphiphilic polystyrene‐poly(ethylene glycol) resin‐supported di(tert‐butyl)phosphine ligand. Aromatic amination of aryl halides with diphenylamine and N,N‐double arylation of anilines with bromobenzene were found to proceed in water with broad substrate tolerance to give the triarylamines in high yield with high recyclability of the polymeric catalyst beads. Very little palladium leached from the polymeric catalyst under the water‐based reaction conditions to provide a green and clean (metal‐uncontaminated) protocol for the preparation of triarylamines, including the optoelectronically active N,N,N′,N′‐tetraaryl‐1,1′‐biphenyl‐4,4′‐diamines (TPDs).     

Solvent-free oxidation of alcohols by hydrogen peroxide over chromium Schiff base complexes immobilized on MCM-41

A series of chromium(III) Schiff base complexes immobilized on MCM-41 were prepared and characterized by various physicochemical and spectroscopic methods. The complexes were used for the selective oxidation of alcohols by 30% hydrogen peroxide without any organic solvent, phase transfer catalyst or additive. The immobilized complexes proved to be effective catalysts and generally exhibited much higher catalytic performance than their corresponding homogeneous analogs. The catalytic performance of the immobilized complexes was also found to be closely related to the Schiff base ligands used. Under the optimal reaction conditions, secondary alcohols, cyclic alcohols and benzyl alcohol were prevailingly oxidized to their corresponding ketones or aldehydes.