In Situ Reconstruction of a Hierarchical Sn‐Cu/SnOx Core/Shell Catalyst for High‐Performance CO2 Electroreduction

The electrochemical CO₂ reduction reaction (CO₂RR) to give C₁ (formate and CO) products is one of the most techno‐economically achievable strategies for alleviating CO₂ emissions. Now, it is demonstrated that the SnO_x shell in Sn_2.7Cu catalyst with a hierarchical Sn‐Cu core can be reconstructed in situ under cathodic potentials of CO₂RR. The resulting Sn_2.7Cu catalyst achieves a high current density of 406.7±14.4 mA cm^?2 with C₁ Faradaic efficiency of 98.0±0.9 % at ?0.70 V vs. RHE, and remains stable at 243.1±19.2 mA cm^?2 with a C₁ Faradaic efficiency of 99.0±0.5 % for 40 h at ?0.55 V vs. RHE. DFT calculations indicate that the reconstructed Sn/SnO_x interface facilitates formic acid production by optimizing binding of the reaction intermediate HCOO* while promotes Faradaic efficiency of C₁ products by suppressing the competitive hydrogen evolution reaction, resulting in high Faradaic efficiency, current density, and stability of CO₂RR at low overpotentials.     

Photo-thermal Cooperative Carbonylation of Ethanol with CO2 on Cu2O-SrTiCuO3-x

Carbonylation of ethanol with CO₂ as carbonyl source into value-added esters is of considerable significance and interest, while remains of great challenge due to the harsh conditions for activation of inert CO₂ in that the harsh conditions result in undesired activation of α-C−H and even cleavage of C−C bond in ethanol to deteriorate the specific activation of O−H bond. Herein, we propose a photo-thermal cooperative strategy for carbonylation of ethanol with CO₂, in which CO₂ is activated to reactive CO via photo-catalysis with the assistance of *H from thermally-catalyzed dissociation of alcoholic O−H bond. To achieve this proposal, an interfacial site and oxygen vacancy both abundant SrTiCuO_3-x supported Cu₂O (Cu₂O-SrTiCuO_3-x) has been designed. A production of up to 320 μmol g⁻¹ h⁻¹ for ethyl formate with a selectivity of 85.6 % to targeted alcoholic O−H activation has been afforded in photo-thermal assisted gas-solid process under 3.29 W cm⁻¹ of UV/Vis light irradiation (144 °C) and 0.2 MPa CO₂. In the photo-driven activation of CO₂ and following carbonylation, CO₂ activation energy decreases to 12.6 kJ mol⁻¹, and the cleavage of alcoholic α-C−H bond has been suppressed.     

Facile Insertion of Carbon Dioxide into Cu2(μ‐H) Dinuclear Units Supported by Tetraphosphine Ligands

Reactions of meso‐bis[(diphenylphosphinomethyl)phenylphosphino]methane (dpmppm) with Cu^I species in the presence of NaBH₄ afforded di‐ and tetranuclear copper hydride complexes, [Cu₂(μ‐H)(μ‐dpmppm)₂]X ( 1 ) and [Cu₄(μ‐H)₂(μ₄‐H)(μ‐dpmppm)₂]X ( 2 ) (X=BF₄, PF₆). Complex 1 undergoes facile insertion of CO₂ (1 atm) at room temperature, leading to a formate‐bridged dicopper complex [Cu₂(μ‐HCOO)(dpmppm)₂]X ( 3 ). The experimental and DFT theoretical studies clearly demonstrate that CO₂ insertion into the Cu₂(μ‐H) unit occurred with the flexible dicopper platform. Complex 2 also undergoes CO₂ insertion to give a formate‐bridged complex, [Cu₄(μ‐HCOO)₃(dpmppm)₂]X, during which the square Cu₄ framework opened up to a linear tetranuclear chain.     

Highly efficient In–Sn alloy catalysts for electrochemical reduction of CO2 to formate

Gas diffusion electrodes (GDEs), including GDE-In_0.90Sn_0.10, GDE-In_0.47Sn_0.53 and GDE-In_0.22Sn_0.78, were prepared by electrodeposition of In–Sn alloys on carbon fiber paper, and then used to explore the electroreduction of CO₂ to formate in aqueous solution. Compared with commercial indium or Sn foil catalysts, the GDE-In_0.90Sn_0.10 electrode in particular is shown to have excellent catalytic performance towards electroreduction of CO₂ to formate, with a high Faradaic efficiency (~ 92%). More importantly, the catalytic activity of GDE-In_0.90Sn_0.10 remained reasonably stable over a 22-hour period of electrolysis, and a relatively high electrolytic current density (15 mA cm^− 2) was obtained in an aqueous medium, demonstrating its potential for electrochemical reduction of CO₂ to formate.     

Ternary Sn‐Ti‐O Electrocatalyst Boosts the Stability and Energy Efficiency of CO2 Reduction

Simultaneously improving energy efficiency (EE) and material stability in electrochemical CO₂ conversion remains an unsolved challenge. Among a series of ternary Sn‐Ti‐O electrocatalysts, 3D ordered mesoporous (3DOM) Sn_0.3Ti_0.7O₂ achieves a trade‐off between active‐site exposure and structural stability, demonstrating up to 71.5 % half‐cell EE over 200 hours, and a 94.5 % Faradaic efficiency for CO at an overpotential as low as 430 mV. DFT and X‐ray absorption fine structure analyses reveal an electron density reconfiguration in the Sn‐Ti‐O system. A downshift of the orbital band center of Sn and a charge depletion of Ti collectively facilitate the dissociative adsorption of the desired intermediate COOH* for CO formation. It is also beneficial in maintaining a local alkaline environment to suppress H₂ and formate formation, and in stabilizing oxygen atoms to prolong durability. These findings provide a new strategy in materials design for efficient CO₂ conversion and beyond.     

A Biomimetic Nickel Complex with a Reduced CO2 Ligand Generated by Formate Deprotonation and Its Behaviour towards CO2

Reduced CO₂ species are key intermediates in a variety of natural and synthetic processes. In the majority of systems, however, they elude isolation or characterisation owing to high reactivity or limited accessibility (heterogeneous systems), and their formulations thus often remain uncertain or are based on calculations only. We herein report on a Ni?CO₂^2? complex that is unique in many ways. While its structural and electronic features help understand the CO₂‐bound state in Ni,Fe carbon monoxide dehydrogenases, its reactivity sheds light on how CO₂ can be converted into CO/CO₃^2? by nickel complexes. In addition, the complex was generated by a rare example of formate β‐deprotonation, a mechanistic step relevant to the nickel‐catalysed conversion of H_xCO_y^z? at electrodes and formate oxidation in formate dehydrogenases.     

Facially Dispersed Polyhydride Cu9 and Cu16 Clusters Comprising Apex‐Truncated Supertetrahedral and Square‐Face‐Capped Cuboctahedral Copper Frameworks

By using a linear tetraphosphine, meso‐bis[(diphenylphosphinomethyl)phenylphosphino]methane (dpmppm), nona‐ and hexadecanuclear copper hydride clusters, [Cu₉H₇(μ‐dpmppm)₃]X₂ (X=Cl ( 1 a ), Br ( 1 b ), I ( 1 c ), PF₆ ( 1 d )) and [Cu₁₆H₁₄(μ‐dpmppm)₄]X₂ (X₂=I₂ ( 2 c ), (4/3) PF₆?(2/3) OH ( 2 d )) were synthesized and characterized. They form copper‐hydride cages of apex‐truncated supertetrahedral {Cu₉H₇}²⁺ and square‐face‐capped cuboctahedral {Cu₁₆H₁₄}²⁺ structures. The hydride positions were estimated by DFT calculations to be facially dispersed around the copper frameworks. A kinetically controlled synthesis gave an unsymmetrical Cu₈H₆ cluster, [Cu₈H₆(μ‐dpmppm)₃]²⁺ ( 3 ), which readily reacted with CO₂ to afford linear Cu₄ complexes with formate bridges, leading to an unprecedented hydrogenation of CO₂ into formate catalyzed by {Cu₄(μ‐dpmppm)₂} platform. The results demonstrate that new motifs of copper hydride clusters could be established by the tetraphosphine ligands, and the structures influence their reactivity.     

In Situ Reconstruction of a Hierarchical Sn-Cu/SnOx Core/Shell Catalyst for High-Performance CO2 Electroreduction

The electrochemical CO₂ reduction reaction (CO₂RR) to give C₁ (formate and CO) products is one of the most techno-economically achievable strategies for alleviating CO₂ emissions. Now, it is demonstrated that the SnO_x shell in Sn_2.7Cu catalyst with a hierarchical Sn-Cu core can be reconstructed in situ under cathodic potentials of CO₂RR. The resulting Sn_2.7Cu catalyst achieves a high current density of 406.7±14.4 mA cm⁻² with C₁ Faradaic efficiency of 98.0±0.9 % at −0.70 V vs. RHE, and remains stable at 243.1±19.2 mA cm⁻² with a C₁ Faradaic efficiency of 99.0±0.5 % for 40 h at −0.55 V vs. RHE. DFT calculations indicate that the reconstructed Sn/SnO_x interface facilitates formic acid production by optimizing binding of the reaction intermediate HCOO* while promotes Faradaic efficiency of C₁ products by suppressing the competitive hydrogen evolution reaction, resulting in high Faradaic efficiency, current density, and stability of CO₂RR at low overpotentials.     

Surface characterization of CuSn thin films deposited by RF co‐sputtering method

CuSn thin films were deposited by the radio‐frequency (RF) magnetron co‐sputtering method on Si(100) with Cu and Sn metal targets with various RF powers. The thickness of the films was fixed at 200 ± 10 nm. The synthesized CuSn thin films mainly consisted of Cu₂₀Sn₆ and Cu₃₉Sn₁₁ phases, which was revealed by an X‐ray diffraction (XRD) study. The high‐resolution Cu 2p XPS and Cu LMM Auger electron spectra indicate that metallic Cu oxidized to Cu⁺ and Cu²⁺ as the RF power on Cu target increased. The atomic ratios of Sn⁰ and Sn⁴⁺ decreased, while that of Sn²⁺ increased with increasing RF power on the Cu target. The polar surface free energy (SFE) component has a different tendency in comparison with the total SFE and the dispersive SFE component. The dispersive SFE component was the dominating contributing factor to the total SFE compared with the polar SFE. Copyright © 2016 John Wiley & Sons, Ltd.     

A Highly Stable Copper‐Based Catalyst for Clarifying the Catalytic Roles of Cu0 and Cu+ Species in Methanol Dehydrogenation

Identification of the active copper species, and further illustration of the catalytic mechanism of Cu‐based catalysts is still a challenge because of the mobility and evolution of Cu⁰ and Cu⁺ species in the reaction process. Thus, an unprecedentedly stable Cu‐based catalyst was prepared by uniformly embedding Cu nanoparticles in a mesoporous silica shell allowing clarification of the catalytic roles of Cu⁰ and Cu⁺ in the dehydrogenation of methanol to methyl formate by combining isotope‐labeling experiment, in situ spectroscopy, and DFT calculations. It is shown that Cu⁰ sites promote the cleavage of the O?H bond in methanol and of the C?H bond in the reaction intermediates CH₃O and H₂COOCH₃ which is formed from CH₃O and HCHO, whereas Cu⁺ sites cause rapid decomposition of formaldehyde generated on the Cu⁰ sites into CO and H₂.     

Methanol conversion over CuO supported on CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript>: An in situ IR spectroscopic study

The main reactions yielding hydrogen are the recombination of hydrogen atoms on copper clusters and methyl formate decomposition. Methyl formate results from the interaction between the linear methoxy group and the formate complex located on CuO. The source of CO₂ appearing in the gas phase is the formate complex, and the source of CO is methyl formate. The rates of methoxy group conversion and product formation over supports (ZrO₂, CeO₂, Ce_0.8Zr_0.2O₂) and copper-containing catalysts (5%Cu/CeO₂, 5%Cu/ZrO₂, 2%Cu/Ce_0.8Zr_0.2O₂, 2%Cu/Ce_0.1Y_0.1Zr_0.8) are compared. The dominant process in methoxy group conversion over the supports and copper-containing catalysts is methanol decomposition to H₂ and CO and to H₂ and CO₂, respectively. The methoxy group conversion rate is proportional to the H₂ and CO₂ formation rate and is determined by the concentration of supported copper.     

Non‐natural Cofactor and Formate‐Driven Reductive Carboxylation of Pyruvate

A non‐natural cofactor and formate driven system for reductive carboxylation of pyruvate is presented. A formate dehydrogenase (FDH) mutant, FDH*, that favors a non‐natural redox cofactor, nicotinamide cytosine dinucleotide (NCD), for generation of a dedicated reducing equivalent at the expense of formate were acquired. By coupling FDH* and NCD‐dependent malic enzyme (ME*), the successful utilization of formate is demonstrated as both CO₂ source and electron donor for reductive carboxylation of pyruvate with a perfect stoichiometry between formate and malate. When ¹³C‐isotope‐labeled formate was used in in vitro trials, up to 53 % of malate had labeled carbon atom. Upon expression of FDH* and ME* in the model host E. coli, the engineered strain produced more malate in the presence of formate and NCD. This work provides an alternative and atom‐economic strategy for CO₂ fixation where formate is used in lieu of CO₂ and offers dedicated reducing power.     

A Theoretical Study of the Water–Gas-Shift Reaction on Cu<Subscript>6</Subscript>TM (TM = Co,Ni, Cu,Rh, Pd,Ag, Ir,Pt, Au) Clusters

We perform density-functional theory calculations to investigate the water–gas-shift (WGS) reaction on Cu₆TM (TM = Co, Ni, Cu, Rh, Pd, Ag, Ir, Pt, Au) clusters through redox, carboxyl, and formate mechanisms, which correspond to CO* + O* → CO₂ (g), CO* + OH* → COOH* → CO₂ (g) + H*, CO* + H* + O* → CHO* + O* → HCOO** → CO₂(g) + H* respectively. An energetic span model is used to estimate the efficiency of the three mechanisms of different Cu₆TM. It finds that for groups 9 and 10, carboxyl mechanism is the predominant mechanism in the three. While for Cu₆TM (Cu, Ag, Au), it finds that the formate mechanism form the TDI and TDTS. Furthermore, the turnover frequency calculations are done for every Cu₆TM cluster. The results show that Cu₆Co is the best catalyst for WGS reaction. Finally, to understand the high catalytic activity of the Cu₆Co cluster, the nature of the interaction between adsorbate and substrate is also analyzed by the detailed electronic local density of states. These findings enrich the applications of Cu-based materials to the high activity catalytic field.     

Acid–Base Interaction Enhancing Oxygen Tolerance in Electrocatalytic Carbon Dioxide Reduction

Hybrid electrodes with improved O₂ tolerance and capability of CO₂ conversion into liquid products in the presence of O₂ are presented. Aniline molecules are introduced into the pore structure of a polymer of intrinsic microporosity to expand its gas separation functionality beyond pure physical sieving. The chemical interaction between the acidic CO₂ molecule and the basic amino group of aniline renders enhanced CO₂ separation from O₂. Loaded with a cobalt phthalocyanine‐based cathode catalyst, the hybrid electrode achieves a CO Faradaic efficiency of 71 % with 10 % O₂ in the CO₂ feed gas. The electrode can still produce CO at an O₂/CO₂ ratio as high as 9:1. Switching to a Sn‐based catalyst, for the first time O₂‐tolerant CO₂ electroreduction to liquid products is realized, generating formate with nearly 100 % selectivity and a current density of 56.7 mA cm^?2 in the presence of 5 % O₂.     

Adsorption of CO2 and Coadsorption of H and CO2 on Potassium‐Promoted Cu(115)

The influence of potassium, in the submonolayer regime, on the adsorption and coadsorption of CO₂ and H on a stepped copper surface, Cu(115), has been studied by photoelectron spectroscopy, temperature‐programmed desorption, and work‐function measurements. Based on the fast recording of C 1s and O 1s core‐level spectra, the uptake of CO₂ on K/Cu(115) surfaces at 120 K has been followed in real time, and the different reaction products have been identified. The K 2p_3/2 peak exhibits a chemical shift of ?0.4 eV with CO₂ saturation, the C 1s peaks of the CO₃ and the CO species show shifts of ?0.8 and ?0.5 eV, respectively, and the C 1s peak of the physisorbed CO₂ exhibits no shift. The effects of gradually heating the CO₂/K/Cu(115) surface include the desorption of physisorbed CO₂ at 143 K; the desorption of CO at 193 K; the ordering of the CO₃ species, and subsequently the dissociation of the carbonate with desorption at 520–700 K. Formate, HCOO^?, was synthesized by the coadsorption of H and CO₂ on the K/Cu(115) surface at 125 K. Formate formed exclusively for potassium coverages of less than 0.4 monolayer, whereas both formate and carbonate were formed at higher coverages. The desorption of formate‐derived CO₂ took place in the temperature range 410–425 K and carbonate‐derived CO₂ desorbed at 645–660 K, depending on the potassium coverage.     

Interfacing Formate Dehydrogenase with Metal Oxides for the Reversible Electrocatalysis and Solar‐Driven Reduction of Carbon Dioxide

The integration of enzymes with synthetic materials allows efficient electrocatalysis and production of solar fuels. Here, we couple formate dehydrogenase ( FDH ) from Desulfovibrio vulgaris Hildenborough (DvH) to metal oxides for catalytic CO₂ reduction and report an in‐depth study of the resulting enzyme–material interface. Protein film voltammetry (PFV) demonstrates the stable binding of FDH on metal‐oxide electrodes and reveals the reversible and selective reduction of CO₂ to formate. Quartz crystal microbalance (QCM) and attenuated total reflection infrared (ATR‐IR) spectroscopy confirm a high binding affinity for FDH to the TiO₂ surface. Adsorption of FDH on dye‐sensitized TiO₂ allows for visible‐light‐driven CO₂ reduction to formate in the absence of a soluble redox mediator with a turnover frequency (TOF) of 11±1 s^?1. The strong coupling of the enzyme to the semiconductor gives rise to a new benchmark in the selective photoreduction of aqueous CO₂ to formate.     

Sulfur Changes the Electrochemical CO2 Reduction Pathway over Cu Electrocatalysts

Electrochemical CO₂ reduction to value-added chemicals or fuels offers a promising approach to reduce carbon emissions and alleviate energy shortage. Cu-based electrocatalysts have been widely reported as capable of reducing CO₂ to produce a variety of multicarbon products (e.g., ethylene and ethanol). In this work, we develop sulfur-doped Cu₂O electrocatalysts, which instead can electrochemically reduce CO₂ to almost exclusively formate. We show that a dynamic equilibrium of S exists at the Cu₂O-electrolyte interface, and S-doped Cu₂O undergoes in situ surface reconstruction to generate active S-adsorbed metallic Cu sites during the CO₂ reduction reaction (CO₂RR). Density functional theory (DFT) calculations together with in situ infrared absorption spectroscopy measurements show that the S-adsorbed metallic Cu surface can not only promote the formation of the *OCHO intermediate but also greatly suppress *H and *COOH adsorption, thus facilitating CO₂-to-formate conversion during the electrochemical CO₂RR.     

Photoreduction of carbon dioxide by hydrogen and methane

Zirconium oxide is active for photoreduction of gaseous carbon dioxide to carbon monoxide with hydrogen. A stable surface species arises under the photoreduction of CO₂ on zirconium oxide, and it is identified as surface formate by infrared spectroscopy. Adsorbed CO₂ is converted to formate by photoreaction with hydrogen. The surface formate is a true reaction intermediate since CO is formed by the photoreaction of formate and CO₂; surface formate works as a reductant of carbon dioxide to yield carbon monoxide. The dependence on the wavelength of irradiation light shows that a bulk ZrO₂ is not a photoactive species. When ZrO₂ adsorbs CO₂ a new band appears in photoluminescence excitation spectrum. The photoactive species in the reaction that CO₂+H₂ yields HCOO⁻ is presumably formed by the adsorption of CO₂ on ZrO₂ surface. Hydrogen molecules play a role to supply an atomic hydrogen. Therefore, methane molecules can also be used as a reductant of carbon dioxide.     

Lateral Adsorbate Interactions Inhibit HCOO− while Promoting CO Selectivity for CO2 Electrocatalysis on Silver

Ag is a promising catalyst for the production of carbon monoxide (CO) via the electrochemical reduction of carbon dioxide (CO₂ER). Herein, we study the role of the formate (HCOO^?) intermediate *OCHO, aiming to resolve the discrepancy between the theoretical understanding and experimental performance of Ag. We show that the first coupled proton‐electron transfer (CPET) step in the CO pathway competes with the Volmer step for formation of *H, whereas this Volmer step is a prerequisite for the formation of *OCHO. We show that *OCHO should form readily on the Ag surface owing to solvation and favorable binding strength. In situ surface‐enhanced Raman spectroscopy (SERS) experiments give preliminary evidence of the presence of O‐bound bidentate species on polycrystalline Ag during CO₂ER which we attribute to *OCHO. Lateral adsorbate interactions in the presence of *OCHO have a significant influence on the surface coverage of *H, resulting in the inhibition of HCOO^? and H₂ production and a higher selectivity towards CO.     

Reduction of Carbon Dioxide to Formate at Low Overpotential Using a Superbase Ionic Liquid

A new low‐energy pathway is reported for the electrochemical reduction of CO₂ to formate and syngas at low overpotentials, utilizing a reactive ionic liquid as the solvent. The superbasic tetraalkyl phosphonium ionic liquid [P₆₆₆₁₄][124Triz] is able to chemisorb CO₂ through equimolar binding of CO₂ with the 1,2,4‐triazole anion. This chemisorbed CO₂ can be reduced at silver electrodes at overpotentials as low as 0.17 V, forming formate. In contrast, physically absorbed CO₂ within the same ionic liquid or in ionic liquids where chemisorption is impossible (such as [P₆₆₆₁₄][NTf₂]) undergoes reduction at significantly increased overpotentials, producing only CO as the product.