Enhanced electrochemical performance of SnS nanoparticles/CNTs composite as anode material for sodium-ion battery

SnS/CNTs composite as anode for SIBs exhibits high reversible capacity, good cyclability as well as rate performance, which is superior to that of pure SnS. The enhanced electrochemical performance can be attributed to the adding of CNTs as a flexible and conductive structure supporter and the formation of SnS nanoparticles with small diameter.     

SnO2 sheet/graphite composite as anode material with improved electrochemical performance for lithium-ion batteries

The SnO₂ sheet/graphite composite was synthesized by a hydrothermal method for high-capacity lithium storage. The microstructures of products were characterized by XRD and FE-SEM. The electrochemical performance of SnO₂ sheet/graphite composite was measured by galvanostatic charge/discharge cycling and EIS. The first discharge and charge capacities are 1,072 and 735 mAh g^?1 with coulombic efficiency of 68.6 %. After 40 cycles, the reversible discharge capacity is still maintained at 477 mAh g^?1. The results show that the SnO₂ sheet/graphite composite displays superior Li-battery performance with large reversible capacity and good cyclic performance.     

Enhanced electrochemical performance of carbon-coated TiO2 nanobarbed fibers as anode material for lithium-ion batteries

We report the electrochemical performance of carbon-coated TiO₂ nanobarbed fibers (TiO₂@C NBFs) as anode material for lithium-ion batteries. The TiO₂@C NBFs are composed of TiO₂ nanorods grown on TiO₂ nanofibers as a core, coated with a carbon shell. These nanostructures form a conductive network showing high capacity and C-rate performance due to fast lithium-ion diffusion and effective electron transfer. The TiO₂@C NBFs show a specific reversible capacity of approximately 170 mAh g^− 1 after 200 cycles at a 0.5 A g^− 1 current density, and exhibit a discharge rate capability of 4 A g^− 1 while retaining a capacity of about 70 mAh g^− 1. The uniformly coated amorphous carbon layer plays an important role to improve the electrical conductivity during the lithiation–delithiation process.     

Preparation and electrochemical performance of nanocarbon-isolated nano-sheet silicon lithium-ion battery anode material

Journal of Solid State Electrochemistry - In this paper, nanocarbon-isolated nano-sheet silicon(Si) electrode Si@CNT/C has been developed by pyrolysis of the compound of Si and polyaniline...     

Fe2O3 xerogel used as the anode material for lithium ion batteries with excellent electrochemical performance

A new strategy was applied to synthesise a porous nanostructure of α-Fe(2)O(3) xerogel assembled from nanocrystalline particles (～5 nm) with abundant mesopores (～3 nm) using a hydrothermal method. The α-Fe(2)O(3) xerogel exhibits excellent cycling performance (up to 1000 cycles) and rate capability (reversible discharging capacity 280 mAh g(-1) at 10 C) as a potential anode for high power lithium-ion batteries.     

Synthesis of MXene-supported layered MoS2 with enhanced electrochemical performance for Mg batteries

In this paper, the petal-like MoS₂/MXene composite has been successfully synthesized by one-step hydrothermal method. With the combination of few-layer MoS₂ nanosheets and the high conductive MXene substrate, the composite exhibits enhanced capacities and rate performance as cathode material of Mg batteries.     

CuFeS2 as an anode material with an enhanced electrochemical performance for lithium-ion batteries fabricated from natural ore chalcopyrite

Journal of Solid State Electrochemistry - Considering serious pollution from the traditional chemical synthesis process, the resource-rich, clean electrode materials are greatly desired....     

One-step electrochemical synthesis of MoS2/graphene composite for supercapacitor application

Journal of Solid State Electrochemistry - In this study, an MoS2/graphene composite is fabricated from bulk MoS2 and graphite rod via a facile electrochemical exfoliation method. The as-prepared...     

Influence of graphene oxide on electrochemical performance of Si anode material for lithium-ion batteries

We have developed a Si/graphene oxide electrode synthesized via ultrasonication-stirring method under alkaline condition. Scanning electron microscopy(SEM), transmission electron microscope(TEM), EDS dot-mapping and high-resolution transmission electron microscopy(HRTEM) results show that Si particles are evenly dispersed on the graphene oxide sheets. The electrochemical performance was investigated by galvanostatic charge/discharge tests at room temperature. The results revealed that Si/graphene oxide electrode exhibited a high reversible capacity of 2825 mAh/g with a coulombic efficiency of 94.6%at 100 mA/g after 15 cycles and a capacity retention of 70.8% after 105 cycles at 4000 mA/g. These performance parameters show a great potential in the high-performance batteries application for portable electronics, electric vehicles and renewable energy storage.     

Enhanced performance of SiO/Fe2O3 composite as an anode for rechargeable Li-ion batteries

Iron oxide (Fe₂O₃) was utilized to enhance the electrochemical properties of SiO as a promising anode for Li-ion batteries. An SiO/Fe₂O₃ composite, composed of SiO coated with Fe₂O₃ nanoparticles, was synthesized by mechanical milling and characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The electrochemical properties of the SiO/Fe₂O₃ composite, SiO, and mechanically milled SiO as anodes for Li-ion batteries were then investigated. The SiO/Fe₂O₃ composite showed superior performance compared with the two Fe₂O₃-free SiO samples, including an increased initial coulombic efficiency, enhanced rate capability, and better capacity retention.     

Enhanced electrochemical performance of nano-MnO2 modified by Ni(OH)2 as electrode material for supercapacitor

Ni(OH)₂ was compounded to MnO₂ in an easy liquid phase process to improve the diffusion process of the electrode. The as-prepared materials were a mixture of amorphous and nanocrystalline with aggregated nanoparticles forming slit-shaped pore structures. The composite has higher specific surface area and smaller pore volume compared with pristine MnO₂. Electrochemical properties of the electrodes were carried out with cyclic voltammetry (CV), galvanostatic charge–discharge tests, and electrochemical impedance spectroscopy (EIS). The MnO₂/Ni(OH)₂ composites exhibited enhanced electrochemical properties than that of pristine MnO₂. Remarkably, the composite which contains 3 % Ni(OH)₂ exerted the best discharged specific of 408 F g^?1 under 0.2 A g^?1, much higher than 247 F g^?1 of pristine MnO₂ at the same current density. Better rate capability and cycling stability were also realized by the same composite in comparison.     

Synthesis and electrochemical properties of Zn3V3O8 as novel anode material

Zn₃V₃O₈ two-dimensional micro sheets are successfully synthesized by combination of solvothermal method and heat treatment. The Zn₃V₃O₈ has better electrochemical performances after calcinations.     

Fabrication and electrochemical performance of nickel ferrite nanoparticles as anode material in lithium ion batteries

Nano-sized nickel ferrite (NiFe₂O₄) was prepared by hydrothermal method at low temperature. The crystalline phase, morphology and specific surface area (BET) of the resultant samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and nitrogen physical adsorption, respectively. The particle sizes of the resulting NiFe₂O₄ samples were in the range of 5–15 nm. The electrochemical performance of NiFe₂O₄ nanoparticles as the anodic material in lithium ion batteries was tested. It was found that the first discharge capacity of the anode made from NiFe₂O₄ nanoparticles could reach a very high value of 1314 mAh g⁻¹, while the discharge capacity decreased to 790.8 mAh g⁻¹ and 709.0 mAh g⁻¹ at a current density of 0.2 mA cm⁻² after 2 and 3 cycles, respectively. The BET surface area is up to 111.4 m² g⁻¹. The reaction mechanism between lithium and nickel ferrite was also discussed based on the results of cycle voltammetry (CV) experiments.     

Lithium storage performance of Sn-MOF-derived SnO2 nanospheres as anode material

Journal of Solid State Electrochemistry - In this work, a spherical Sn-MOF precursor was synthesized through hydrothermal method using 1,3,5-benzenetricarboxylic acid (H3BTC) as the organic ligand....     

Electrochemical performance of lithium titanate anode fabricated using a water-based binder

1. Download high-res image (109KB)
2. Download full-size image

     

Enhanced energy storage performance of nanocrystalline Sm-doped CoFe2O4 as an effective anode material for Li-ion battery applications

Journal of Solid State Electrochemistry - A simple modified combustion method was demonstrated in the development of cobalt ferrite (CoFe2O4) and samarium (Sm)-doped CoFe2O4 nanostructures. The...     

Heterostructured MoS2/GPC anode: the synergistic lithium storage performance and lithiation kinetics

Journal of Solid State Electrochemistry - Grapefruit peel carbon (GPC) is prepared from waste grapefruit peel and further used as substrate for in situ construction of MoS2 arrays, forming MoS2/GPC...     

Vertical crosslinking MoS2/three-dimensional graphene composite towards high performance supercapacitor

The vertical crosslinking MoS₂/three-dimensional graphene composite has been prepared by hydrothermal method, which delivered a superior and stable electrochemical capacitive performance.     

Interconnected sandwich structure carbon/Si-SiO2/carbon nanospheres composite as high performance anode material for lithium-ion batteries

In the present work,an interconnected sandwich carbon/Si-SiO2/carbon nanospheres composite was prepared by template method and carbon thermal vapor deposition（TVD）.The carbon conductive layer can not only efficiently improve the electronic conductivity of Si-based anode,but also play a key role in alleviating the negative effect from huge volume expansion over discharge/charge of Si-based anode.The resulting material delivered a reversible capacity of 1094 mAh/g,and exhibited excellent cycling stability.It kept a reversible capacity of 1050 mAh/g over 200 cycles with a capacity retention of 96%.     

Interconnected sandwich structure carbon/Si-SiO_2/carbon nanospheres composite as high performance anode material for lithium-ion batteries

In the present work,an interconnected sandwich carbon/Si-SiO_2/carbon nanospheres composite was prepared by template method and carbon thermal vapor deposition(TVD).The carbon conductive layer can not only efficiently improve the electronic conductivity of Si-based anode,but also play a key role in alleviating the negative effect from huge volume expansion over discharge/charge of Si-based anode.The resulting material delivered a reversible capacity of 1094 mAh/g,and exhibited excellent cycling stability.It kept a reversible capacity of 1050 mAh/g over 200 cycles with a capacity retention of 96%.