Michael addition reactions between biological thiols and endocyclic olefinic maleimides are extensively used for site‐specific bioconjugation. The resulting thio‐succinimidyl linkages, however, lack stability because of their susceptibility to thiol exchange. Reported herein is that in contrast to their endocyclic counterparts, exocyclic olefinic maleimides form highly stable thio‐Michael adducts which resist thiol exchange at physiological conditions. A high‐yielding approach for synthesizing a variety of exocyclic olefinic maleimides, by 4‐nitrophenol‐catalyzed solvent‐free Wittig reactions, is reported. Mechanistic studies reveal that the catalyst facilitates the formation of the Wittig ylide intermediate through sequential proton donation and abstraction. Overall, this report details an improved thiol bioconjugation approach, a facile method for synthesizing exocyclic olefinic maleimides, and demonstrates that phenolic compounds can catalyze ylide formation. 相似文献
N-Alkoxycarbonylmaleimides 3 have been prepared and used to convert amino acids to maleimido acids (6–8) in aqueous solution. The carboxyl group of maleimido acids can be activated for amide or peptide synthesis (e.g., in the N-succinimidyl esters 10); t-butyl-based protecting groups can be cleaved without damage to the maleimide moiety. Peptides carrying maleimide groups are accessible either from the maleimido acids (e.g., 11b, 15) or by direct maleoylation (e.g., 16b). The maleoyl group can be cleaved off by successive mild alkaline and acid hydrolysis or by hydrazinolysis. The reactivity of maleimides toward thiol groups suggests the use of maleimido acids and maleoylpeptides for preparing a wide range of conjugates of biochemical interest. 相似文献
A series of hindered Diels‐Alder adducts have been prepared from phencyclone, 1 , with various unusual symmetrical cyclic dienophiles, including cyclohexene, 2a ; vinylene carbonate, 2b ; vinylene trithiocarbonate, 2c ; and the N‐aryl maleimides: N‐(4‐dimethylamino‐3,5‐dinitrophenyl)maleimide (“Tuppy's maleimide”), 2d ; and N‐[3,5‐bis(trifluoromethyl)phenyl]maleimide, 2e . The highly hindered adducts, 3a‐e , respectively, were extensively characterized by one‐ and two‐dimensional NMR methods, observing proton, carbon‐13 and fluorine‐19. High resolution COSY45 spectra permitted rigorous proton NMR assignments. The 2D heteronuclear C‐H chemical shift correlation spectra (HETCOR, XHCORR) were obtained for adducts 3a‐d , allowing specific assignments for protonated carbons. Corrections to earlier proton NMR assignments for the vinylene carbonate adduct are given; results of the gated decoupling 13C NMR experiment for this adduct supported endo adduct stereochemistry. Relative proton chemical shifts for bridgehead phenyls of adduct 3c appeared anomalous relative to other adducts, suggesting possible special anisotropic interactions (with endocyclic sulfur or other anisotropic groups in the product) due to the unusual calculated orientation of the phenyls. The unsubstituted bridgehead phenyls in all adducts were shown to exhibit slow exchange limit (SEL) 1H and 13C spectra on the NMR timescales at ambient temperatures (7 tesla) showing slow rotations about the C(sp3)‐C(aryl sp2) bonds. The rapid rotation of the N‐aryl rings of the maleimide adducts was indicated by fast exchange limit spectra, suggesting that ortho substitution of the N‐aryl ring may be necessary to slow this rotation to the SEL regime. Ab initio geometry optimizations at the Hartree‐Fock level were carried out for each adduct, with the 6‐31G* basis sets. Appreciable geometry differences were seen in calculated structures, and significant NMR chemical shift differences were experimentally observed, depending on the nature of the groups attached to the (Z)‐HC=CH moiety of the dienophiles. 相似文献
The maximum absorption wavelength , emission wavelength (λem) and the related oscillator strength (f) of the maleimides in the ground and first excited states were calculated by using the DFT, CIS and the time-dependent density functional theory (TD-DFT) methods, where the molecular structures were optimized by DFT/B3LYP/6-31G* calculation. Solvent effects on the maleimides were examined using the PCM simulation at DFT/B3LYP level with the 6-31G* basis set. For N-substituted maleimide, the substituent gives only a slight influence on the maleimide chromophore, while planar conformation of PhMLH leads to the improvement in π-delocalization from substituent to maleimide unit. For 3,4-substituted maleimide, the steric repulsion between substituent and maleimide chromophore influences the extent of π-delocalization and the molecular conformation. The calculated and λem of maleimides are in good agreement with the experimental data. In the gas phase, both absorption and emission peaks are red-shift as compared to the non-substituted maleimide. Under solvent environment, the more planar conformation of PhMLH shows a blue-shift in the calculated and λem as compared with other N-substituted maleimides. For 3,4-substituted maleimides, the effect of substitution produces the most significant spectral red-shift as compared to other maleimides. 相似文献
We describe a new technique in protein synthesis that extends the existing repertoire of methods for protein modification: A chemoselective reaction that induces reactivity for a subsequent bioconjugation. An azide‐modified building block reacts first with an ethynylphosphonite through a Staudinger‐phosphonite reaction (SPhR) to give an ethynylphosphonamidate. The resulting electron‐deficient triple bond subsequently undergoes a cysteine‐selective reaction with proteins or antibodies. We demonstrate that ethynylphosphonamidates display excellent cysteine‐selective reactivity combined with superior stability of the thiol adducts, when compared to classical maleimide linkages. This turns our technique into a versatile and powerful tool for the facile construction of stable functional protein conjugates. 相似文献
Maleimide chemistry is widely used in the site-selective modification of proteins. However, hydrolysis of the resultant thiosuccinimides is required to provide robust stability to the bioconjugates. Herein, we present an alternative approach that affords simultaneous stabilisation and dual functionalisation in a one pot fashion. By consecutive conjugation of a thiol and an amine to dibromomaleimides, we show that aminothiomaleimides can be generated extremely efficiently. Furthermore, the amine serves to deactivate the electrophilicity of the maleimide, precluding further reactivity and hence generating stable conjugates. We have applied this conjugation strategy to peptides and proteins to generate stabilised trifunctional conjugates. We propose that this stabilisation-dual modification strategy could have widespread use in the generation of diverse conjugates.An alternative approach to maleimide conjugate stabilisation is presented, by the consecutive addition of a thiol and an amine to dibromomaleimides. The amine serves to simultaneously deactivate the maleimide and enable dual functionalisation.相似文献
A series of new hypervalent iodine reagents based on the 1,3‐dihydro‐3,3‐dimethyl‐1,2‐benziodoxole and 1,2‐benziodoxol‐3‐(1H)‐one scaffolds, which contain a functionalized tetrafluoroethyl group, have been prepared, characterized, and used in synthetic applications. Their corresponding electrophilic fluoroalkylation reactions with various sulfur, oxygen, phosphorus, and carbon‐centered nucleophiles afford products that feature a tetrafluoroethylene unit, which connects two functional moieties. A related λ3‐iodane that contains a fluorophore was shown to react with a cysteine derivative under mild conditions to give a thiol‐tagged product that is stable in the presence of excess thiol. Therefore, these new reagents show a significant potential for applications in chemical biology as tools for fast, irreversible, and selective thiol bioconjugation. 相似文献
Maleimides are essential compounds for drug conjugation reactions via thiols to antibodies, peptides and other targeting units. However, one main drawback is the occurrence of thiol exchange reactions with, for example, glutathione resulting in loss of the targeting ability. A new strategy to overcome such retro-Michael exchange processes of maleimide–thiol conjugates by stabilization of the thiosuccinimide via a transcyclization reaction is presented. This reaction enables the straightforward synthesis of stable maleimide–thiol adducts essential in drug-conjugation applications. 相似文献
Thiol‐click reactions lead to polymeric materials with a wide range of interesting mechanical, electrical, and optical properties. However, this reaction mechanism typically results in bulk materials with a low glass transition temperature (Tg) due to rotational flexibility around the thioether linkages found in networks such as thiol‐ene, thiol‐epoxy, and thiol‐acrylate systems. This report explores the thiol‐maleimide reaction utilized for the first time as a solvent‐free reaction system to synthesize high‐Tg thermosetting networks. Through thermomechanical characterization via dynamic mechanical analysis, the homogeneity and Tgs of thiol‐maleimide networks are compared to similarly structured thiol‐ene and thiol‐epoxy networks. While preliminary data show more heterogeneous networks for thiol‐maleimide systems, bulk materials exhibit Tgs 80 °C higher than other thiol‐click systems explored herein. Finally, hollow tubes are synthesized using each thiol‐click reaction mechanism and employed in low‐ and high‐temperature environments, demonstrating the ability to withstand a compressive radial 100 N deformation at 100 °C wherein other thiol‐click systems fail mechanically.
In the presence of iron pentacarbonyl, photochemical reaction between phenylisocyanate and ferrocenylacetylene results in ferrapyrrolinone complex [Fe2(CO)6(μ2‐η3‐FcC═C(H)C(O)NPh)] ( 1 ) and maleimide 3‐ferrocenyl‐1‐phenyl‐1H ‐pyrrole‐2,5‐dione ( 2 ). Under similar experimental conditions, ferrocenyl−/phenyl‐substituted butadiyne primarily shows the activation of only one C☰C bond and results in ferrapyrrolinone complexes [Fe2(CO)6(μ2‐η3‐FcC═C(C☰CR)C(O)NPh)] ( 3 , R = Fc; 3a , R = Ph), maleimides 3‐ferrocenyl‐1‐phenyl‐4‐(ferrocenylethynyl)‐1H –pyrrole‐2,5‐dione ( 5 ) and 3‐ferrocenyl‐1‐phenyl‐4‐(phenylethynyl)‐1H –pyrrole‐2,5‐dione ( 5a ) and [Fe2(CO)6(μ2‐η3‐FcC═C(R)C(O)NPh)] ( 4 ; R = 3‐ferrocenyl‐1‐phenyl‐1H ‐pyrrole‐2,5‐dione). Compound 4 consists of ferrapyrrolinone and a maleimide unit, formed by the activation of both C☰C bonds of diferrocenylbutadiyne. Activation of both C☰C bonds in a substituted butadiyne is a rare observation. Formation of the ferrapyrrolinone compounds is an advance over the earlier reported methods which generally use internal alkynes and involve prior synthesis of other clusters. 相似文献
Sodium N-(4-sulfophenyl) maleimide (SPMI) and its saturated succinimide counterpart were first prepared according to established methods. Hydrolysis experiments on these monomers monitored by 1H-NMR showed that although SPMI monomer was about 15% hydrolyzed in D2O at 23°C in 24 h. Sodium N-(4-sulfophenyl) succinimide, which is similar in structure to the imide units in the copolymers, was only 1% hydrolyzed after 18 days at 23°C and 29% hydrolyzed after 18 days at 60°C. This indicated that the saturated imide rings in the copolymer might be sufficiently stable to hydrolysis for the copolymers to be useful. However, hydrolysis at high pH demonstrated that the imide rings would be rapidly saponified under alkaline conditions, destroying the structural rigidity that the intact rings might have provided in the copolymer chains. Sodium N-(4-sulfophenyl) maleimide (SPMI) was copolymerized with acrylamide in water at 30°C without cleavage of the imide ring. Water-soluble poly [acrylamide-co-sodium-N-(4-sulfophenyl) maleimide] (PAMSM) samples containing from 7.4 to 64 mol % imide were prepared. Photoacoustic FTIR and 13C-NMR spectra were used to confirm the structure of the copolymers obtained. Elemental analysis was used to determine the imide content of the copolymers, and from this composition data reactivity ratios were calculated for the two component monomers. 相似文献
Maleimide chemistry stands out in the bioconjugation toolbox by virtue of its synthetic accessibility, excellent reactivity, and practicability. The second-generation of clinically approved antibody–drug conjugates (ADC) and much of the current ADC pipeline in clinical trials contain the maleimide linkage. However, thiosuccinimide linkages are now known to be less robust than once thought, and ergo, are correlated with suboptimal pharmacodynamics, pharmacokinetics, and safety profiles in some ADC constructs. Rational design of novel generations of maleimides and maleimide-type reagents have been reported to address the shortcomings of classical maleimides, allowing for the formation of robust bioconjugate linkages. This review highlights the main strategies for rational reagent design that have allowed irreversible bioconjugations in cysteines, reversible labelling strategies and disulfide re-bridging. 相似文献
The fluorescent diaminoterephthalate scaffold was equipped by amidation with three types of reactive functions: thiols for metal‐surface binding, alkynes for click reactions, and maleimides for ligation with proteins. Starting from a succinyl succinate derivative with two orthogonally cleavable ester functions, three monoamides (38–57 % yield over three steps) and two bisamides (19 and 25 % yield over five steps) were prepared. Although alkyne and thiol derivatized compounds showed reasonable luminescence behavior (Φ≈1–4 %), the fluorescence was quenched by the maleimide moiety. It was turned on (10‐ to 20‐fold increase of fluorescence quantum yield) by conjugate addition of thiols. 相似文献