A Self‐Standing and Flexible Electrode of Yolk–Shell CoS2 Spheres Encapsulated with Nitrogen‐Doped Graphene for High‐Performance Lithium‐Ion Batteries

Flexible lithium‐ion batteries (LIBs) have recently attracted increasing attention with the fast development of bendable electronic systems. Herein, a facile and template‐free solvothermal method is presented for the fabrication of hybrid yolk–shell CoS₂ and nitrogen‐doped graphene (NG) sheets. The yolk–shell architecture of CoS₂ encapsulated with NG coating is designed for the dual protection of CoS₂ to address the structural and interfacial stability concerns facing the CoS₂ anode. The as‐prepared composite can be assembled into a film, which can be used as a binder‐free and flexible electrode for LIBs that does not require any carbon black conducting additives or current collectors. When evaluating lithium‐storage properties, such a flexible electrode exhibits a high specific capacity of 992 mAh g^?1 in the first reversible discharge capacity at a current rate of 100 mA g^?1 and high reversible capacity of 882 mAh g^?1 after 150 cycles with excellent capacity retention of 89.91 %. Furthermore, a reversible capacity as high as 655 mAh g^?1 is still achieved after 50 cycles even at a high rate of 5 C due to the yolk–shell structure and NG coating, which not only provide short Li‐ion and electron pathways, but also accommodate large volume variation.     

CoS2/N-Doped Hollow Spheres as an Anode Material for High-Performance Sodium-Ion Batteries

In this work, we first synthesized polyacrylic acid (PAA) spheres and then used PAA as a template to load Co(OH)₂ particles onto its surface. The product of CoS₂ nanoparticles dispersed in N-doped hollow spheres (N-HCS) was prepared through sulfurization treatment (CoS₂/S@N-HCS). During the sulfuration process, sulfur penetrates into the PAA, embedding into the graphite layer along with the carbonization process. It was found that during the charging and discharging process, the sulfur in the carbon layer will gradually dissolve out, thereby forming new ion diffusion channels in the carbon spheres and exposing more CoS₂ active sites. The CoS₂/S@N-HCS composite exhibits a specific capacity of 729.6 mAh g⁻¹ after 500 cycles at a current density of 1 A g⁻¹. The sodium-storage mechanism and reaction kinetics of the materials were further measured by in-situ electrochemical impedance spectroscopy, ex-situ X-ray diffraction, capacitance performance evaluation, and galvanostatic intermittent titration technique. The excellent cycling performance and rate capability demonstrated that the CoS₂/S@N-HCS is a potential and prospective anode material for sodium-ion batteries.     

Nitrogen‐Doped Mesoporous Carbon‐Encapsulated MoO2 Nanobelts as a High‐Capacity and Stable Host for Lithium‐Ion Storage

N‐doped mesoporous carbon‐capped MoO₂ nanobelts (designated as MoO₂@NC) were synthesized and applied to lithium‐ion storage. Owing to the stable core–shell structural framework and conductive mesoporous carbon matrix, the as‐prepared MoO₂@NC shows a high specific capacity of around 700 mA h g⁻¹ at a current of 0.5 A g⁻¹, excellent cycling stability up to 100 cycles, and superior rate performance. The N‐doped mesoporous carbon can greatly improve the conductivity and provide uninhibited conducting pathways for fast charge transfer and transport. Moreover, the core–shell structure improved the structural integrity, leading to a high stability during the cycling process. All of these merits make the MoO₂@NC to be a suitable and promising material for lithium ion battery.     

Scalable Dry Production Process of a Superior 3D Net‐Like Carbon‐Based Iron Oxide Anode Material for Lithium‐Ion Batteries

Carbon‐based transition‐metal oxides are considered as an appropriate anode material candidate for lithium‐ion batteries. Herein, a simple and scalable dry production process is developed to produce carbon‐encapsulated 3D net‐like FeO_x /C materials. The process is simply associated with the pyrolysis of a solid carbon source, such as filter paper, adsorbed with ferrite nitrate. The carbon derived from filter paper induces a carbothermal reduction to form metallic Fe, the addition of carbon and iron increase the conductivity of this material. As expected, this 3D net‐like FeO_x /C composite delivers an excellent charge capacity of 851.3 mAh g⁻¹ after 50 cycles at 0.2 A g⁻¹ as well as high stability and rate performance of 714.7 mAh g⁻¹ after 300 cycles at 1 A g⁻¹. Superior performance, harmlessness, low costs, and high yield may greatly stimulate the practical application of the products as anode materials in lithium‐ion batteries.     

Nanohybridization of CoS2/MoS2 Heterostructure with Polyoxometalate on Functionalized Reduced Graphene Oxide for High-Performance LIBs

To address the poor cycling stability and low rate capability of MoS₂ as electrode materials for lithium-ion batteries (LIBs), herein, the CoS₂/MoS₂/PDDA-rGO/PMo₁₂ nanocomposites are constructed via a simple hydrothermal process, combining the advantages of all three, namely, CoS₂/MoS₂ heterojunction and polyoxometalates (POMs) provide abundant catalytically active sites and increase the multi-electron transfer ability, and the positively charged poly(diallyldimethylammonium chloride) modified reduced graphene oxide (PDDA-rGO) improve electronic conductivity and effectively prevent the aggregation of MoS₂, meanwhile stabilize the negatively charged [PMo₁₂O₄₀]³⁻. After the electrochemical testing, the resulting CoS₂/MoS₂/PDDA-rGO/PMo₁₂ nanocomposite achieved 1055 mA h g⁻¹ initial specific capacities and stabilized at 740 mA h g⁻¹ after 150 cycles at 100 mA g⁻¹ current density. And the specific capacities of MoS₂, MoS₂/PDDA-rGO, CoS₂/MoS₂, and CoS₂/MoS₂/PDDA-rGO were 201, 421, 518, and 589 at 100 mA g⁻¹ after 150 cycles, respectively. The fact of the greatly improving capacity of MoS₂-based nanocomposites suggests its potential for high performance electrode materials of LIBs. Moreover, the lithium storage mechanism of CoS₂/MoS₂/PDDA-rGO/PMo₁₂ has been discussed on the basis of cyclic voltammetry with different scan rates.     

Scalable Synthesis of One-Dimensional Mesoporous ZnMnO3 Nanorods with Ultra-Stable and High Rate Capability for Efficient Lithium Storage

The cost-efficient ZnMnO₃ has attracted increasing attention as a prospective anode candidate for advanced lithium-ion batteries (LIBs) owing to its resourceful abundance, large lithium storage capacity and low operating voltage. However, its practical application is still seriously limited by the modest cycling and rate performances. Herein, a facile design to scalable synthesize unique one-dimensional (1D) mesoporous ZnMnO₃ nanorods (ZMO-NRs) composed of nanoscale particles (≈11 nm) is reported. The 1D mesoporous structure and nanoscale building blocks of the ZMO-NRs effectively promote the transport of ions/electrons, accommodate severe volume changes, and expose more active sites for lithium storage. Benefiting from these appealing structural merits, the obtained ZMO-NRs anode exhibits excellent rate behavior (≈454 mAh g⁻¹ at 2 A g⁻¹) and ultra-long term cyclic performance (≈949.7 mAh g⁻¹ even over 500 cycles at 0.5 A g⁻¹) for efficient lithium storage. Additionally, the LiNi_0.8Co_0.1Mn_0.1O₂//ZMO-NRs full cell presents a practical energy density (≈192.2 Wh kg⁻¹) and impressive cyclability with approximately 91 % capacity retention over 110 cycles. This highlights that the ZMO-NRs product is a highly promising high-rate and stable electrode candidate towards advanced LIBs in electronic devices and sustainable energy storage applications.     

Coated/Sandwiched rGO/CoSx Composites Derived from Metal–Organic Frameworks/GO as Advanced Anode Materials for Lithium‐Ion Batteries

Rational composite materials made from transition metal sulfides and reduced graphene oxide (rGO) are highly desirable for designing high‐performance lithium‐ion batteries (LIBs). Here, rGO‐coated or sandwiched CoS_x composites are fabricated through facile thermal sulfurization of metal–organic framework/GO precursors. By scrupulously changing the proportion of Co²⁺ and organic ligands and the solvent of the reaction system, we can tune the forms of GO as either a coating or a supporting layer. Upon testing as anode materials for LIBs, the as‐prepared CoS_x‐rGO‐CoS_x and rGO@CoS_x composites demonstrate brilliant electrochemical performances such as high initial specific capacities of 1248 and 1320 mA h g^?1, respectively, at a current density of 100 mA g^?1, and stable cycling abilities of 670 and 613 mA h g^?1, respectively, after 100 charge/discharge cycles, as well as superior rate capabilities. The excellent electrical conductivity and porous structure of the CoS_x/rGO composites can promote Li⁺ transfer and mitigate internal stress during the charge/discharge process, thus significantly improving the electrochemical performance of electrode materials.     

Porous Si-Cu3Si-Cu Microsphere@C Core–Shell Composites with Enhanced Electrochemical Lithium Storage

Low-cost Si-based anode materials with excellent electrochemical lithium storage present attractive prospects for lithium-ion batteries (LIBs). Herein, porous Si-Cu₃Si-Cu microsphere@C composites are designed and prepared by means of an etching/electroless deposition and subsequent carbon coating. The composites show a core–shell structure, with a porous Si/Cu microsphere core surrounded by the N-doped carbon shell. The Cu and Cu₃Si nanoparticles are embedded inside porous silicon microspheres, forming the porous Si/Cu microsphere core. The microstructure and lithium storage performance of porous Si-Cu₃Si-Cu microsphere@C composites can be effectively tuned by changing electroless deposition time. The Si-Cu₃Si-Cu microsphere@C composite prepared with 12 min electroless deposition delivers a reversible capacity of 627 mAh g⁻¹ after 200 cycles at 2 A g⁻¹, showing an enhanced lithium storage ability. The superior lithium storage performance of the Si-Cu₃Si-Cu microsphere@C composite can be ascribed to the improved electronic conductivity, enhanced mechanical stability, and better buffering against the large volume change in the repeated lithiation/delithiation processes.     

Catalytically Active CoSe2 Supported on Nitrogen-Doped Three Dimensional Porous Carbon as a Cathode for Highly Stable Lithium-Sulfur Battery

Lithium-sulfur batteries are promising secondary energy storage devices that are mainly limited by its unsatisfactory cyclability owing to inefficient reversible conversion of sulfur and lithium sulfide on the cathode during the discharge/charging process. In this study, nitrogen-doped three-dimensional porous carbon material loaded with CoSe₂ nanoparticles (CoSe₂-PNC) is developed as a cathode for lithium-sulfur battery. A combination of CoSe₂ and nitrogen-doped porous carbon can efficiently improve the cathode activity and its conductivity, resulting in enhanced redox kinetics of the charge/discharge process. The obtained electrode exhibits a high discharge specific capacity of 1139.6 mAh g⁻¹ at a current density of 0.2 C. After 100 cycles, its capacity remained at 865.7 mAh g⁻¹ thus corresponding to a capacity retention of 75.97 %. In a long-term cycling test, discharge specific capacity of 546.7 mAh g⁻¹ was observed after 300 cycles performed at a current density of 1 C.     

Multi-stage Ordered Mesoporous Carbon-graphene Aerogel-Ni3S2/Co4S3 for Supercapacitor Electrode

Transition metal sulfides have emerged as promising materials in supercapacitor. In this work, we firstly developed an interface-induced superassembly approach to fabricate NiS_x and CoS_x nanoparticles, which based on ordered mesoporous carbon-graphene aerogel composites for supercapacitor electrodes. The obtained multi-component superassembled nanoparticles-carbon matrix composites have controllable 3D porous structure of multi-stage composite. The two-dimensional graphene interlaced to form a 3D framework with large sponge-like pores, and then the graphene surface was loaded with mesoporous carbon with mesoporous pore size and vertical orientation. The composites display high specific capacitance of 958.1 F g⁻¹ at 0.1 A g⁻¹. The capacitance retains about 97.3 % after 3000 charging-discharging cycles at 2 A g⁻¹. These results indicate that the obtained OMC−GA−Ni₃S₂/Co₄S₃ is a promising material for electrochemical capacitors, which providing new technical methods and ideas for the research of new energy and analytical sensor materials in the fields of energy storage, photocatalysis, point-of-care testing devices and other fields.     

Mesoporous Carbon@Titanium Nitride Hollow Spheres as an Efficient SeS2 Host for Advanced Li–SeS2 Batteries

The introduction of a certain proportion of selenium into sulfur‐based cathodes is an effective strategy for enhancing the integrated battery performance. However, similar to sulfur, selenium sulfide cathodes suffer from poor cycling stability owing to the dissolution of reaction intermediate products. In this study, to exploit the advantages of SeS₂ to the full and avoid its shortcomings, we designed and synthesized a hollow mesoporous carbon@titanium nitride (HMC@TiN) host for loading 70 wt % of SeS₂ as a cathode material for Li–SeS₂ batteries. Benefiting from both physical and chemical entrapment by hollow mesoporous carbon and TiN, the HMC@TiN/SeS₂ cathode manifests high utilization of the active material and excellent cycling stability. Moreover, it exhibits promising areal capacity (up to 4 mAh cm⁻²) with stable cell performance in the high‐mass‐loading electrode.     

Freeze‐Drying‐Assisted Synthesis of Hierarchically Porous Carbon/Germanium Hybrid for High‐Efficiency Lithium‐Ion Batteries

Herein, an approach is reported to prepare porous a carbon/Ge (C/Ge) hybrid. In this hybrid, Ge nanoparticles are closely embedded in a highly conductive and flexible carbon matrix. Such a hybrid features a high surface area (128.0 m² g^?1) and a hierarchical micropore–mesopore structure. When used as an anode material in lithium‐ion batteries (LIBs), the as‐prepared hybrid [C/Ge (60.37 %)] exhibits an improved lithium storage performance with regard to its capacity and rate capability compared to its counterparts. More specifically, it can maintain a specific capacity as high as 906 mAh g^?1 at a high current density of 0.6 A g^?1 after 50 cycles. The excellent lithium storage performance of the C/Ge (60.37 %) sample can be attributed to synergetic effects between the carbon matrix and Ge nanoparticles. The method we adopted is simple and effective, and can be extended to fabricate other nanomaterials.     

Low-Temperature Synthesis of Honeycomb CuP2@C in Molten ZnCl2 Salt for High-Performance Lithium Ion Batteries

Phosphorus-rich metal phosphides have very high lithium storage capacities, but they are difficult to prepare. A low-temperature phosphorization method based on Mg reducing PCl₃ in ZnCl₂ molten salt at 300 °C is developed to synthesize phosphorus-rich CuP₂@C from a Cu-MOF derived Cu@C composite. Abnormal oxidation of Cu by Zn²⁺ in the molten salt is observed, which leads to the porous honeycomb nanostructure and homogeneously distributed ultrafine CuP₂ nanocrystals. The honeycomb CuP₂@C exhibits excellent lithium storage performance with high reversible capacity (1146 mAh g⁻¹ at 0.2 A g⁻¹) and superior cycling stability (720 mAh g⁻¹ after 600 cycles at 1.0 A g⁻¹), showing the promising application of P-rich metal phosphides in lithium ion batteries.     

Dramatically Enhanced Li-Ion Storage of ZnO@C Anodes through TiO2 Homogeneous Hybridization

Amorphous nanoparticles of ZnO and TiO₂ embedded in carbon nanocages (AZT⊂CNCs) were successfully synthesized through a simple annealing process of TiO₂-coated zeolitic imidazolate framework-8 (ZIF-8). In the current anode of AZT⊂CNCs, tiny ZnO and TiO₂ nanoparticles were uniformly distributed in the carbon matrix (carbon nanocages), which could effectively buffer the volume expansion of electroactive ZnO and provide excellent electric conductivity. After fully investigating the electrochemical performance of the AZT⊂CNCs samples obtained with different additive amounts of tetrabutyl orthotitanate (TBOT) for TiO₂ coating, it has been found that AZT-30 (0.1 g ZIF-8 with 30 mL TBOT) shows the best cycle stability (510 mA h g⁻¹ after 350 cycles at 200 mA g⁻¹) and a superior rate capability (610 mA h g⁻¹ after 3500 cycles at 2 A g⁻¹). The greatly enhanced Li-ion storage performance could be ascribed to the fact that the introduction of amorphous TiO₂ could activate the reversible lithiation/delithiation reaction of ZnO during the charge/discharge process.     

Supercritical Carbon Dioxide Assisted Deposition of Fe3O4 Nanoparticles on Hierarchical Porous Carbon and Their Lithium‐Storage Performance

A composite of highly dispersed Fe₃O₄ nanoparticles (NPs) anchored in three‐dimensional hierarchical porous carbon networks (Fe₃O₄/3DHPC) as an anode material for lithium‐ion batteries (LIBs) was prepared by means of a deposition technique assisted by a supercritical carbon dioxide (scCO₂)‐expanded ethanol solution. The as‐synthesized Fe₃O₄/3DHPC composite exhibits a bimodal porous 3D architecture with mutually connected 3.7 nm mesopores defined in the macroporous wall on which a layer of small and uniform Fe₃O₄ NPs was closely coated. As an anode material for LIBs, the Fe₃O₄/3DHPC composite with 79 wt % Fe₃O₄ (Fe₃O₄/3DHPC‐79) delivered a high reversible capacity of 1462 mA h g^?1 after 100 cycles at a current density of 100 mA g^?1, and maintained good high‐rate performance (728, 507, and 239 mA h g^?1 at 1, 2, and 5 C, respectively). Moreover, it showed excellent long‐term cycling performance at high current densities, 1 and 2 A g^?1. The enhanced lithium‐storage behavior can be attributed to the synergistic effect of the porous support and the homogeneous Fe₃O₄ NPs. More importantly, this straightforward, highly efficient, and green synthetic route will definitely enrich the methodologies for the fabrication of carbon‐based transition‐metal oxide composites, and provide great potential materials for additional applications in supercapacitors, sensors, and catalyses.     

Boron‐Doped,Carbon‐Coated SnO2/Graphene Nanosheets for Enhanced Lithium Storage

Heteroatom doping is an effective method to adjust the electrochemical behavior of carbonaceous materials. In this work, boron‐doped, carbon‐coated SnO₂/graphene hybrids (BCTGs) were fabricated by hydrothermal carbonization of sucrose in the presence of SnO₂/graphene nanosheets and phenylboronic acid or boric acid as dopant source and subsequent thermal treatment. Owing to their unique 2D core–shell architecture and B‐doped carbon shells, BCTGs have enhanced conductivity and extra active sites for lithium storage. With phenylboronic acid as B source, the resulting hybrid shows outstanding electrochemical performance as the anode in lithium‐ion batteries with a highly stable capacity of 1165 mA h g^?1 at 0.1 A g^?1 after 360 cycles and an excellent rate capability of 600 mA h g^?1 at 3.2 A g^?1, and thus outperforms most of the previously reported SnO₂‐based anode materials.     

CoS2 Nanoparticles Embedded in Covalent Organic Polymers as Efficient Electrocatalyst for Oxygen Evolution Reaction with Ultralow Overpotential

Cobalt disulfide (CoS₂) has been explored as attractive electrocatalyst for oxygen evolution reaction (OER). However, bulk CoS₂ sheets have limited catalytic activity due to low exposure of active sites. Herein, through an in-situ vulcanization approach, CoS₂ nanoparticles are embedded into bipyridine-containing covalent organic polymer (BP-COP). The as-prepared nanocomposite CoS₂@BP-COP exhibits high catalytic activity toward OER with an ultra-low overpotential of 270 mV (vs. RHE) at a current density of 10 mA cm⁻², a small Tafel slope of 36 mV dec⁻¹, and an excellent durability for 24 h without decay. The surface of CoS₂ is partially converted into CoOOH to form CoS₂/CoOOH as active sites under OER conditions. CoS₂@BP-COP displays superior OER catalytic activity to CoS₂ nanosheets and commercially available RuO₂ under the same conditions. The outstanding OER performance activity of CoS₂@BP-COP could be attributed to the uniform and small particle sizes of CoS₂/CoOOH distributed in BP-COP.     

Revisiting Surface Modification of Graphite: Dual‐Layer Coating for High‐Performance Lithium Battery Anode Materials

Surface modification of electrode active materials has garnered considerable attention as a facile way to meet stringent requirements of advanced lithium‐ion batteries. Here, we demonstrated a new coating strategy based on dual layers comprising antimony‐doped tin oxide (ATO) nanoparticles and carbon. The ATO nanoparticles are synthesized via a hydrothermal method and act as electronically conductive/electrochemically active materials. The as‐synthesized ATO nanoparticles are introduced on natural graphite along with citric acid used as a carbon precursor. After carbonization, the carbon/ATO‐decorated natural graphite (c/ATO‐NG) is produced. In the (carbon/ATO) dual‐layer coating, the ATO nanoparticles coupled with the carbon layer exhibit unprecedented synergistic effects. The resultant c/ATO‐NG anode materials display significant improvements in capacity (530 mA h g^?1), cycling retention (capacity retention of 98.1 % after 50 cycles at a rate of C/5), and low electrode swelling (volume expansion of 38 % after 100 cycles) which outperform that of typical graphite materials. Furthermore, a full‐cell consisting of a c/ATO‐NG anode and an LiNi_0.5Mn_1.5O₄ cathode presents excellent cycle retention (capacity retention of >80 % after 100 cycles). We envision that the dual‐layer coating concept proposed herein opens a new route toward high‐performance anode materials for lithium‐ion batteries.     

Guanine/Ionic Liquid Derived Ordered Mesoporous Carbon Decorated with AuNPs as Efficient NADH Biosensor and Suitable Platform for Enzymes Immobilization and Biofuel Cell Design

Guanine‐ionic liquid derived ordered mesoporous carbon (GIOMC) decorated with gold nanoparticles was used as electrocatalyste for NADH oxidation and electrochemical platform for immobilization of glucose dehydrogenase (GDH) enzyme. The resulting GIOMC/AuNPs on the glassy carbon electrode can be used as novel redox‐mediator free for NADH sensing and this integrated system (GIOMC/AuNPs/GDH) shows excellent electrocatalytic activity toward glucose oxidation. Furthermore, the ionic liquid derived ordered mesoporous carbon derivate with Ph‐SO₃H (IOMC‐PhSO₃H) decorated with AuNPs has been developed to bilirubin oxidase enzyme (BOD) immobilization and the GC/IOMC‐PhSO₃H/BOD integrated system shows excellent bioelectrocatalytic activity toward oxygen reduction reaction. The proposed mesostructured platforms decorated by AuNPs have been developed to enhance mass transfer and charge transfer from biocatalyst to electrode, leading these bioanode and biocathode used for biofuel cell assembly. Integration designed bioanode and biocathode yielding a membrane‐less glucose/O₂ biofuel cell with power density of 33 (mW.cm⁻²) at 257 mV. The open circuit voltage of this biofuel cell and maximum produced current density were 508 mV and 0.252 (mA.cm⁻²) respectively.     

Antimony/Porous Biomass Carbon Nanocomposites as High‐Capacity Anode Materials for Sodium‐Ion Batteries

Antimony/porous biomass carbon nanocomposites have been prepared by a chemical reduction method and applied as anodes for sodium‐ion batteries. The porous biomass carbon derived from a black fungus had a large Brunauer–Emmett–Teller (BET) surface area of 2233 m² g⁻¹ in which antimony nanoparticles were uniformly distributed in the porous carbon. The as‐prepared antimony/porous biomass carbon nanocomposites exhibited a high reversible sodium storage capacity of 567 mA h g⁻¹ at a current density of 100 mA g⁻¹, extended cycling stability, and good rate capability.