Pt3Co Concave Nanocubes: Synthesis,Formation Understanding,and Enhanced Catalytic Activity toward Hydrogenation of Styrene

We report a facile synthesis route to prepare high‐quality Pt₃Co nanocubes with a concave structure, and further demonstrate that these concave Pt₃Co nanocubes are terminated with high‐index crystal facets. The success of this preparation is highly dependent on an appropriate nucleation process with a successively anisotropic overgrowth and a preservation of the resultant high‐index planes by control binding of oleyl‐amine/oleic acid with a fine‐tuned composition. Using a hydrogenation of styrene as a model reaction, these Pt₃Co concave nanocubes as a new class of nanocatalysts with more open structure and active atomic sites located on their high‐index crystallographic planes exhibit an enhanced catalytic activity in comparison with low‐indexed surface terminated Pt₃Co nanocubes in similar size.     

PVP封端剂对Pd纳米晶电催化氧化甲醇和乙醇性能的影响

Direct alcohol fuel cells (DAFCs) have attracted considerable research interest because of their potential application as alternative power sources for automotive systems and portable electronics. Pd-based catalysts represent one of the most popular catalysts for DAFCs due to their excellent electrocatalytic activities in alkaline electrolytes. Thus, it is of great importance to understand the structure-activity relationship of Pd electrocatalysts for alcohol electrocatalysis. Recently, size- and shape- controlled Pd nanocrystals have been successfully synthesized and subsequently used to study the size and shape effects of Pd electrocatalysts on alcohol electrocatalysis, in which the Pd (100) facet exhibited higher electrocatalytic oxidation activity for small alcohol molecules than the Pd (111) and (110) facets. Although it is well known that capping ligands, which are widely used in wet chemistry for the size- and shape-controlled synthesis of metal nanocrystals, likely chemisorb onto the surfaces of the resulting metal nanocrystals and influence their surface structure and surface-mediated properties, such as catalysis, this issue was not considered in previous studies of Pd nanocrystal electrocatalysts for electrocatalytic oxidation of small alcohol molecules. In this study, we prepared polyvinylpyrrolidone (PVP)-capped Pd nanocrystals with different morphologies and sizes and comparatively studied their electrocatalytic activities for methanol and ethanol oxidation in alkaline solutions. The chemisorbed PVP molecules transferred charge to the Pd nanocrystals, and the finer Pd nanocrystals had a higher coverage of chemisorbed PVP, and thus exposed fewer accessible surface sites, experienced more extensive PVP-to-Pd charge transfer, and were more negatively charged. The intrinsic electrocatalytic activity, represented by the electrochemical surface area (ECSA)-normalized electrocatalytic activity, of Pd nanocubes with exposed (100) facets increases with the particle size, indicating that the more negatively-charged Pd surface is less electrocatalytically active. The Pd nanocubes with average sizes between 12 and 19 nm are intrinsically more electrocatalytically active than commercial Pd black electrocatalysts, while the activity of Pd nanocubes with an averages size of 8 nm is less. This suggests that the enhancement effect of the exposed (100) facets surpasses the deteriorative effect of the negatively charged Pd surface for the Pd nanocubes with average sizes between 12 and 19 nm, whereas the deteriorative effect of the negatively charged Pd surface surpasses the enhancement effect of the exposed (100) facets for the Pd nanocubes with average sizes of 8 nm due to the extensive PVP-to-Pd charge transfer. Moreover, the Pd nanocubes with average sizes of 8 nm exhibit similar intrinsic electrocatalytic activity to the Pd nanooctahedra with (111) facets exposed and average sizes of 7 nm, indicating that the electronic structure of Pd electrocatalysts plays a more important role in influencing the electrocatalytic activity than the exposed facet. Since the chemisorbed PVP molecules block the surface sites on Pd nanocrystals that are accessible to the reactants, all Pd nanocrystals exhibit lower mass-normalized electrocatalytic activity than the Pd black electrocatalysts, and the mass-normalized electrocatalytic activity increases with the ECSA. These results clearly demonstrate that the size- and shape-dependent electrocatalytic activity of Pd nanocrystals capped with PVP for methanol and ethanol oxidation should be attributed to both the exposed facets of the Pd nanocrystals and the size-dependent electronic structures of the Pd nanocrystals resulting from the size-dependent PVP coverage and PVP-to-Pd charge transfer. Therefore, capping ligands on capped metal nanocrystals inevitably influence their surface structures and surface-mediated properties, which must be considered for a comprehensive understanding of the structure-activity relationship of capped metal nanocrystals.     

Facile Synthesis of Carbon‐Supported Ultrasmall Ag@Pd Core‐Shell Nanocrystals with Superior Electrocatalytic Activity for Direct Formic Acid Fuel Cell Application

To design electrocatalysts with excellent performance, morphology, composition and structure is a decisive influential factor. In this work, ultrasmall Ag@Pd core‐shell nanocrystals supported on Vulcan XC72R carbon with different Ag/Pd atomic ratios are synthesized via a facile successive reduction approach with formaldehyde and ethylene glycol as reducing agents, respectively. The Ag‐core/Pd‐shell nanostructures are revealed by high‐resolution transmission electron microscopy (HRTEM). Ag@Pd core‐shell nanocrystals possess a narrow size distribution with an average size of ca. 4.3 nm. In comparison to monometallic Pd/C and commercial Pd black catalysts, such Ag@Pd core‐shell nanocrystals display excellent electrocatalytic activities for formic acid oxidation, which may be due to high Pd utilization derived from the formation of Ag@Pd core‐shell nanostructure and the strong interaction between Ag and Pd.     

高指数晶面纳米催化剂的电化学制备及应用

催化剂的性能与其表面结构及组成密切相关,高指数晶面纳米晶的表面含有高密度的台阶原子等活性位点而表现出较高的催化活性. 本文综述了电化学方波电位方法用于Pt、Pd、Rh等贵金属高指数晶面结构纳米晶催化剂的制备、形成机理及其电催化性能的研究. 针对贵金属利用率问题,还着重介绍了具有较高质量活性的小粒径Pt二十四面体的制备. 在此基础上,还介绍了电化学方波电位方法用于低共熔溶剂中制备高指数晶面纳米晶,以及高指数晶面纳米催化剂的表面修饰及应用;最后对高指数晶面纳米催化剂的发展做出了展望.     

Electrochemical Synthesis of Tetrahexahedral Rhodium Nanocrystals with Extraordinarily High Surface Energy and High Electrocatalytic Activity

Noble metal nanocrystals (NCs) enclosed with high‐index facets hold a high catalytic activity thanks to the high density of low‐coordinated step atoms that they exposed on their surface. Shape‐control synthesis of the metal NCs with high‐index facets presents a big challenge owing to the high surface energy of the NCs, and the shape control for metal Rh is even more difficult because of its extraordinarily high surface energy in comparison with Pt, Pd, and Au. The successful synthesis is presented of tetrahexahedral Rh NCs (THH Rh NCs) enclosed by {830} high‐index facets through the dynamic oxygen adsorption/desorption mediated by square‐wave potential. The results demonstrate that the THH Rh NCs exhibit greatly enhanced catalytic activity over commercial Rh black catalyst for the electrooxidation of ethanol and CO.     

Synthesis of nanocrystals with variable high-index Pd facets through the controlled heteroepitaxial growth of trisoctahedral Au templates

The shape-controlled synthesis of noble metal nanocrystals (NCs) bounded by high-index facets is a current research interest because the products have the potential of significantly improving the catalytic performance of NCs in industrially important reactions. This study reports a versatile method for synthesizing polyhedral NCs enclosed by a variety of high-index Pd facets. The method is based on the heteroepitaxial growth of Pd layers on concave trisoctahedral (TOH) gold NC seeds under careful control of the growth kinetics. Polyhedral Au@Pd NCs with three different classes of high-index facets, including concave TOH NCs with {hhl} facets, concave hexoctahedral (HOH) NCs with {hkl} facets, and tetrahexahedral (THH) NCs with {hk0} facets, can be formed in high yield. The Miller indices of NCs are also modifiable, and we have used the THH NCs as a demonstrative example. The catalytic activities of these NCs were evaluated by the structure-sensitive reaction of formic acid electro-oxidation. The results showed that the high-index facets are generally more active than the low-index facets. In summary, a seeded growth process based on concave high-index faceted monometallic TOH NC templates and careful control of the growth kinetics is a simple and effective strategy for the synthesis of noble metal NCs with high-index facets. It also offers tailorability of the surface structure in shape-controlled synthesis.     

Oxygen‐Assisted Synthesis of Mesoporous Palladium Nanoparticles as Highly Active Electrocatalysts

Mesoporous Pd nanoparticles (MPNs) enclosed by high‐index facets have been successfully prepared by taking advantage of successive oxygen adsorption and desorption caused by the oxidative etching effect. The as‐prepared MPNs exhibit excellent performance toward formic acid electro‐oxidation, which is due to the synergetic effect between the diffusion‐feasible tubular mesochannels and the high index facets.     

Highly dispersed palladium nanoclusters incorporated in amino‐functionalized silica spheres for the selective hydrogenation of succinic acid to γ‐butyrolactone

Highly dispersed palladium nanoclusters incorporated on amino‐functionalized silica sphere surfaces (Pd/SiO₂‐NH₂) were fabricated by a simple one‐pot synthesis utilizing 3‐(2‐aminoethylamino)propyltrimethoxysilane (AAPTS) as coordinating agent. Uniform palladium nanoclusters with an average size of 1.1 nm can be obtained during the co‐condensation of tetraethyl orthosilicate and AAPTS owing to the strong interaction between palladium species and amino groups in AAPTS. The palladium particle size can be controlled by addition of AAPTS and plays a significant role in the catalytic performance. The Pd/SiO₂‐NH₂ catalyst exhibits high catalytic activity for succinic acid hydrogenation with 100% conversion and 94% selectivity towards γ‐butyrolactone using 1,4‐dioxane as solvent at 240°C and 60 bar for 4 h. Moreover, the Pd/SiO₂‐NH₂ catalyst is robust and readily reusable without loss of its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation of FePd‐RGO Bimetallic Composites with High Catalytic Activity for Formic Acid Electro‐Oxidation

FePd‐RGO composites through the growth of uniformly dispersed iron‐palladium bimetallic nanoparticles (NPs) on reduced graphene oxide (RGO) nanosheets were prepared by a two‐step method. The firstly formed Fe is used as the seed for the subsequent Pd growth. The formation of Fe NPs on RGO in the first step is performed by an in‐situ reduction reaction with the reducer ethylene glycol under oil bath at 180°C. NPs in the as‐prepared FePd‐RGO have an average particle size of 6.5 nm, and Pd is added to one side of Fe which leads to the formation of Fe‐Pd bimetallic interfaces. As compared with the commercial Pd black at the same loading, the composites have higher electro‐catalytic activity, better electrochemical stability and higher resistance to CO poisoning for formic acid electro‐oxidation.     

Amine-assisted synthesis of concave polyhedral platinum nanocrystals having {411} high-index facets

High-index surfaces of a face-centered cubic metal (e.g., Pd, Pt) have a high density of low-coordinated surface atoms and therefore possess enhanced catalysis activity in comparison with low-index faces. However, because of their high surface energy, the challenge of chemically preparing metal nanocrystals having high-index facets remains. We demonstrate in this work that introducing amines as the surface controller allows concave Pt nanocrystals having {411} high-index facets to be prepared through a facile wet-chemical route. The as-prepared Pt nanocrystals display a unique octapod morphology with {411} facets. The presence of high-index {411} exposed facets endows the concave Pt nanocrystals with excellent electrocatalytic activity in the oxidation of both formic acid and ethanol.     

Fabrication of Au-Pd core-shell heterostructures with systematic shape evolution using octahedral nanocrystal cores and their catalytic activity

By using octahedral gold nanocrystals with sizes of approximately 50 nm as the structure-directing cores for the overgrowth of Pd shells, Au-Pd core-shell heterostructures with systematic shape evolution can be directly synthesized. Core-shell octahedra, truncated octahedra, cuboctahedra, truncated cubes, and concave cubes were produced by progressively decreasing the amount of the gold nanocrystal solution introduced into the reaction mixture containing cetyltrimethylammonium bromide (CTAB), H(2)PdCl(4), and ascorbic acid. The core-shell structure and composition of these nanocrystals has been confirmed. Only the concave cubes are bounded by a variety of high-index facets. This may be a manifestation of the release of lattice strain with their thick shells at the corners. Formation of the [CTA](2)[PdBr(4)] complex species has been identified spectroscopically. Time-dependent UV-vis absorption spectra showed faster Pd source consumption rates in the growth of truncated cubes and concave cubes, while a much slower reduction rate was observed in the generation of octahedra. The concave cubes and octahedra were used as catalysts for a Suzuki coupling reaction. They can all serve as effective and recyclable catalysts, but the concave cubes gave higher product yields with a shorter reaction time attributed to their high-index surface facets. The concave cubes can also catalyze a wide range of Suzuki coupling reactions using aryl iodides and arylboronic acids with electron-donating and -withdrawing substituents.     

锐钛矿型TiO2担载的Pd催化剂用于乙炔选择加氢的催化性能及其表征

Anatase TiO₂ nanospindles containing 89% exposed {101} facets (TiO₂-101) and nanosheets with 77% exposed {001} facets (TiO₂-001) were hydrothermally synthesized and used as supports for Pd catalysts. The effects of the TiO₂ materials on the catalytic performance of Pd/TiO₂-101 and Pd/TiO₂-001 catalysts were investigated in the selective hydrogenation of acetylene to polymer-grade ethylene. The Pd/TiO₂-101 catalyst exhibited enhanced performance in terms of acetylene conversion and ethylene yield. To understand these effects, the catalysts were characterized by H₂ temperature-programmed desorption (H₂-TPD), H₂ temperatureprogrammed reduction (H₂-TPR), transmission electron microscopy (TEM), pulse CO chemisorption, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The TEM and CO chemisorption results confirmed that Pd nanoparticles (NPs) on the TiO₂-101 support had a smaller average particle size (1.53 nm) and a higher dispersion (15.95%) than those on the TiO₂-001 support (average particle size of 4.36 nm and dispersion of 9.06%). The smaller particle size and higher dispersion of Pd on the Pd/TiO₂-101 catalyst provided more reaction active sites, which contributed to the improved catalytic activity of this supported catalyst.     

Pd‐Cu alloy nanoparticle supported on amine‐terminated ionic liquid functional 3D graphene and its application on Suzuki cross‐coupling reaction

Well distributed Pd‐Cu bimetallic alloy nanoparticles supported on amine‐terminated ionic liquid functional three‐dimensional graphene (3D IL‐rGO/Pd‐Cu) as an efficient catalyst for Suzuki cross‐coupling reaction has been prepared via a facile synthetic method. The introduction of IL‐NH₂ cations on the surface of graphene sheets can effectively avoid the re‐deposition of graphene sheets, allowing the catalyst to be reused up to 10 cycles. The addition of Cu not only saves cost but also ensures high catalytic efficiency. It is worthy to note that the catalyst 3D IL‐rGO/Pd_2.5Cu_2.5 can efficiently catalyze the Suzuki cross‐coupling reaction with the yield up to 100% in 0.25 h, almost one‐fold higher than that by the pristine IL‐rGO/Pd_2.5 catalyst (52%). The Powder X‐Ray Diffraction (XRD), combining energy dispersive X‐ray spectroscopy (EDS) mapping results confirm the existence and distribution of Pd and Cu in the bimetallic nanoparticles. The transmission electron microscopy (TEM) reveals the nanoparticle size with an average diameter of 3.0 ± 0.5 nm. X‐ray photoelectron spectroscopy (XPS) analysis proved the presence of electron transfer from Cu to Pd upon alloying. Such alloying‐induced electronic modification of Pd‐Cu alloy and 3D ionic liquid functional graphene with large specific surface area both accounted for the catalytic enhancement.     

Hydrothermal Synthesis of Platinum‐Group‐Metal Nanoparticles by Using HEPES as a Reductant and Stabilizer

Platinum‐group‐metal (Ru, Os, Rh, Ir, Pd and Pt) nanoparticles are synthesized in an aqueous buffer solution of 4‐(2‐hydroxyethyl)‐1‐piperazineethanesulfonic acid (HEPES) (200 mM , pH 7.4) under hydrothermal conditions (180 °C). Monodispersed (monodispersity: 11–15 %) metal nanoparticles were obtained with an average particle size of less than 5 nm (Ru: 1.8±0.2, Os: 1.6±0.2, Rh: 4.5±0.5, Ir: 2.0±0.3, Pd: 3.8±0.4, Pt: 1.9±0.2 nm). The size, monodispersity, and stability of the as‐obtained metal nanoparticles were affected by the HEPES concentration, pH of the HEPES buffer solution, and reaction temperature. HEPES with two tertiary amines (piperazine groups) and terminal hydroxyl groups can act as a reductant and stabilizer. The HEPES molecules can bind to the surface of metal nanoparticles to prevent metal nanoparticles from aggregation. These platinum‐group‐metal nanoparticles could be deposited onto the surface of graphite, which catalyzed the aerobic oxidation of alcohols to aldehydes.     

Synthesis of Pd-Pt bimetallic nanocrystals with a concave structure through a bromide-induced galvanic replacement reaction

This article describes a systematic study of the galvanic replacement reaction between PtCl(6)(2-) ions and Pd nanocrystals with different shapes, including cubes, cuboctahedrons, and octahedrons. It was found that Br(-) ions played an important role in initiating, facilitating, and directing the replacement reaction. The presence of Br(-) ions led to the selective initiation of galvanic replacement from the {100} facets of Pd nanocrystals, likely due to the preferential adsorption of Br(-) ions on this crystallographic plane. The site-selective galvanic replacement resulted in the formation of Pd-Pt bimetallic nanocrystals with a concave structure owing to simultaneous dissolution of Pd atoms from the {100} facets and deposition of the resultant Pt atoms on the {111} facets. The Pd-Pt concave nanocubes with different weight percentages of Pt at 3.4, 10.4, 19.9, and 34.4 were also evaluated as electrocatalysts for the oxygen reduction reaction (ORR). Significantly, the sample with a 3.4 wt.% of Pt exhibited the largest specific electrochemical surface area and was found to be four times as active as the commercial Pt/C catalyst for the ORR in terms of equivalent Pt mass.     

Facilitating a high‐performance photocatalyst for Suzuki reaction: Palladium nanoparticles immobilized on reduced graphene oxide‐doped graphitic carbon nitride

We prepared a non‐covalently coupled hybrid of reduced graphene oxide (rGO)‐doped graphitic carbon nitride (g‐C₃N₄) by freezing‐assisted assembly and calcination. Fourier transform infrared, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy confirmed that rGO was incorporated into the bulk g‐C₃N₄, which was an ideal support for loading Pd nanoparticles. The Pd nanoparticles with an average size of 4.57 nm were uniformly dispersed on the rGO‐doped g‐C₃N₄ surface. The layered structure provided large contact area of g‐C₃N₄ with rGO, further accelerating the electron transfer rate and inhibiting electron–hole recombination. Consequently, compared with Pd/rGO/g‐C₃N₄ and Pd/g‐C₃N₄, the Pd/rGO‐doped g‐C₃N₄ showed a prominent catalytic activity for visible‐light‐driven photocatalytic Suzuki–Miyaura coupling at ambient temperature. The Pd/rGO‐doped g‐C₃N₄ exhibited very high stability after six consecutive cycles with minimal loss of catalytic activity.     

高(111)晶面暴露的Pd纳米颗粒的制备与表征及其加氢性能

通过液相氢气还原法,在不同温度下制备出了不同（111）晶面占比的Pd单晶纳米颗粒,用活性炭吸附制备成Pd/C纳米催化剂。通过透射电子显微镜（TEM）、傅里叶变换（FFT）、X射线衍射（XRD）表征证实了低温下制备的Pd纳米颗粒具有较高的（111）晶面占比。氢氧脉冲滴定（H₂-O₂）和H₂-程序升温脱附（H₂-TPD）结果显示,上述催化剂表面吸附氢气量与其Pd（111）晶面占比呈线性关系。此外,该系列Pd/C催化剂具有相似的粒径4.3 nm以及较窄的尺寸分布,相近的孔隙参数和Pd负载量,从而可对比（111）晶面比例差异对其加氢性能的影响。3个探针反应（苯乙烯、环己烯和对硝基甲苯的加氢反应）的实验结果表明,相比于低（111）晶面暴露比例的Pd/C催化剂,含有高（111）晶面暴露比例的Pd/C催化剂显示出更高的加氢活性,且Pd（111）晶面比例与氢气消耗速率呈一定的线性关系,这归因于H₂优先吸附于Pd（111）晶面促进了活性氢原子的形成。基于以上分析,高（111）晶面暴露的Pd基催化剂有利于加氢性能的提高。     

Adsorption of hydrogen on palladium nanoparticle surfaces

The behaviors of hydrogen (H) adsorbed on the palladium (Pd) nanoparticles (NPs) are examined with the modified analytic embedded‐atom method potentials and MORSE potentials. We study the effects of particle size and H coverage, and compare their adsorption properties of nanoparticle's facets with that of flat surfaces. We simulate the Pd truncated octahedron NPs with atoms from 38 to 2406 and the coverage of adsorbed H up to 1.0 monolayer (ML). Site preferences, adsorption geometries, adsorption energies, and bond lengths of H? Pd are calculated. We have also calculated the potential energy surface (PES). It is clear that the H atom binding to particle facets is quite stronger than that of flat surfaces when the particle size is smaller than 3.2 nm. We have found a significant variation that adsorption energies ascend gradually with increasing the particle size or surface coverage of H, and the adsorption energy varies about 0.6 eV for (111) facet and 0.3 eV for (100) facet as the coverage up to 1.0 ML. Our results are in reasonable agreement with the experimental values and other calculations. Copyright © 2009 John Wiley & Sons, Ltd.     

Dragon Fruit Foliage: An Agricultural Cellulosic Source to Extract Cellulose Nanomaterials

In this report, we focus our effort to extract cellulose nanomaterials (CNs) from an agricultural cellulosic waste, Dragon Fruit foliage (DFF). DFF was first pretreated by several mechanical treatments and then bleached by chemical treatment to obtain bleached DFF. CNs were then produced from the hydrolysis of the bleached DFF catalyzed by sulfuric acid. We obtained CNs with a small diameter (50 to 130 nm) and length (100 to 500 nm) and a height of 3 to 10 nm. The CNs have a high crystallinity (crystallinity index 84.8%), high −COOH content (0.74 mmol·g⁻¹), good thermal stability and a good Cu (II) adsorption capacity with an adsorption maximum of ~103 mg·g⁻¹. These findings demonstrated the great potential of converting many agricultural cellulosic wastes into valuable cellulose nanomaterials.     

有机溶胶法制备直接甲酸燃料电池用Pd/C阳极催化剂

采用改进的有机溶胶法制备了用于直接甲酸燃料电池(DFAFC)中甲酸氧化的炭载Pd(Pd/C)催化剂。制备Pd/C催化剂时,以乙醇作溶剂,SnCl2作还原剂。控制溶剂的蒸发温度就能控制Pd/C催化剂中Pd粒子的平均粒径和相对结晶度。溶剂蒸发温度与Pd/C催化剂中Pd粒子的平均粒径和相对结晶度不成正比关系。在选择合适的溶剂蒸发温度时,能制得Pd粒子的平均粒径至6.5 nm和相对结晶度至2.85的Pd/C催化剂。比较了具有不同Pd粒子的平均粒径和相对结晶度的Pd/C催化剂对甲酸氧化的电催化性能。结果发现,Pd粒子的平均粒径小和相对结晶度低的Pd/C催化剂对甲酸氧化有好的电催化性能。