Selective detection of Hg2+ ion in aqueous medium with the use of 3‐(pyrimidin‐2‐ylimino)indolin‐2‐one‐functionalized SBA‐15

An isatin‐based fluorophore, 3‐(pyrimidin‐2‐ylimino)indolin‐2‐one, was grafted on a large‐pore mesoporous silica material (SBA‐15) via a two‐step modification process. The obtained material (SBA‐Is‐Py) was characterized using various techniques and the characterization showed that the ordered porous structure was preserved after the post‐grafting procedure. The optical sensing ability of SBA‐Is‐Py was studied upon the addition of a variety of metal ions and a marked fluorescence quenching by Hg²⁺ ion was observed. SBA‐Is‐Py exhibited excellent Hg²⁺‐specific luminescence quenching over various competing cations. Furthermore, linear changes of the optical properties of SBA‐Is‐Py as a function of the concentrations of Hg²⁺ ion were found, with a calculated detection limit of 3.28 × 10^?7 M. In addition, SBA‐Is‐Py was successfully employed for the determination of Hg²⁺ in real water samples.     

Simultaneous Determination of Cadmium,Lead, Copper and Mercury Ions Using Organofunctionalized SBA‐15 Nanostructured Silica Modified Graphite–Polyurethane Composite Electrode

A new sensor has been developed for the simultaneous detection of cadmium, lead, copper and mercury, using differential pulse and square wave anodic stripping voltammetry (DPASV and SWASV) at a graphite–polyurethane composite electrode with SBA‐15 silica organofunctionalized with 2‐benzothiazolethiol as bulk modifier. The heavy metal ions were preconcentrated on the surface of the modified electrode at ?1.1 V vs. SCE where they complex with 2‐benzothiazolethiol and are reduced to the metals, and are then reoxidized. Optimum SWASV conditions lead to nanomolar detection limits and simultaneous determination of Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺ in natural waters was achieved.     

A New Fluorescent Chemosensor for Metal Ions Based upon 1,8‐Naphthalimide and 8‐Hydroxyquinoline

A new fluorescent chemosensor based upon 1,8‐naphthalimide and 8‐hydroxyquinoline was synthesized, and its fluorescent properties in the presence of different metal cations (Hg²⁺, Ag⁺, Zn²⁺, Fe²⁺, Cd²⁺, Pb²⁺, Ca²⁺, Cu²⁺, Mg²⁺, and Ba²⁺) were investigated. It displayed fluorescence quenching with some heavy and transition metal (HTM) ions, and the quenching strongly depended on the nature of HTM ions.     

Polymer‐based colorimetric and “turn off” fluorescence sensor incorporating benzo[2,1,3]thiadiazole moiety for Hg2+ Detection

A conjugated polymer was synthesized by the polymerization of 4,7‐dibromobenzo[2,1,3]thiadiazole ( M‐1 ) with tri{1,4‐diethynyl‐2,5‐bis(2‐(2‐methoxyethoxy)‐ethoxy)}‐benzene ( M‐2 ) via Pd‐catalyzed Sonogashira reaction. The polymer shows strong orange fluorescence. The responsive optical properties of the polymer on various metal ions were investigated through photoluminescence and UV–vis absorption measurements. The polymer displays highly sensitive and selective on‐off Hg²⁺ fluorescence quenching property in tetrahydrofuran solution in comparison with the other cations including Mg²⁺, Zn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, and Pb²⁺. More importantly, the fluorescent color of the polymer sensor disappears after addition of Hg²⁺, which could be easily detected by naked eyes. The results indicate that this kind of polymer sensor incorporating benzo[2,1,3]thiadiazole moiety as a ligand can be used as a novel colorimetric and fluorometric sensor for Hg²⁺ detection. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polymer‐based fluorescence sensors incorporating chiral binaphthyl and benzo[2,1,3]thiadiazole moieties for Hg2+ detection

Three chiral polymers P‐1 , P‐2 , and P‐3 could be obtained by the polymerization of (R)‐6,6′‐dibutyl‐3,3′‐diiodo‐2, 2′‐binaphthol (R‐M‐1) , (R)‐6,6′‐dibutyl‐3,3′‐diiodo‐2,2′‐bisoctoxy‐1,1′‐binaphthyl ( R‐M‐2 ), and (R)‐6,6′‐dibutyl‐3,3′‐diiodo‐2,2′‐bis (diethylaminoethoxy)‐1,1′‐binaphthyl ( R‐M‐3 ) with 4,7‐diethynyl‐benzo[2,1,3]‐thiadiazole ( M‐1) via Pd‐catalyzed Sonogashira reaction, respectively. P‐1 , P‐2 , and P‐3 can show pale red, blue–green, and orange fluorescence. The responsive optical properties of these polymers on various metal ions were investigated by fluorescence spectra. Compared with other cations, such as Co²⁺, Ni²⁺, Ag⁺, Cd²⁺, Cu²⁺, and Zn²⁺, Hg²⁺ can exhibit the most pronounced fluorescence response of these polymers. P‐1 and P‐2 show obvious fluorescence quenching effect upon addition of Hg²⁺, on the contrary, P‐3 shows fluorescence enhancement. Three polymer‐based fluorescent sensors also show excellent fluorescence response for Hg²⁺ detection without interference from other metal ions. The results indicate that these kinds of tunable chiral polybinaphthyls can be used as fluorescence sensors for Hg²⁺ detection. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 997–1006, 2010     

Competitive heavy metal removal by poly(2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid‐co‐itaconic acid)

The competitive removal of Pb²⁺, Cu²⁺, and Cd²⁺ ions from aqueous solutions by the copolymer of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (AMPS) and itaconic acid (IA), P(AMPS‐co‐IA), was investigated. Homopolymer of AMPS (PAMPS) was also used to remove these ions from their aqueous solution. In the preparation of AMPS–IA copolymer, the molar percentages of AMPS and IA were 80 and 20, respectively. In order to observe the changes in the structures of polymers due to metal adsorption, FTIR spectra by attenuated total reflectancetechnique and scanning electron microscopy (SEM) pictures of the polymers were taken both before and after adsorption experiments. Total metal ion removal capacities of PAMPS and P(AMPS‐co‐IA) were 1.685 and 1.722 mmol Me²⁺/g_polymer, respectively. Experimental data were evaluated to determine the kinetic characteristics of the adsorption process. Competitive adsorption of Pb²⁺, Cu²⁺, and Cd²⁺ ions onto both PAMPS and P(AMPS‐co‐IA) was found to fit pseudo‐second‐order type kinetics. In addition, the removal orders in the competitive adsorption of these metal ions onto PAMPS and P(AMPS‐co‐IA) were found to be Cd²⁺ > Pb²⁺ > Cu²⁺ and Pb²⁺ > Cd²⁺ > Cu²⁺, respectively. Copyright © 2008 John Wiley & Sons, Ltd.     

A Schiff base‐grafted nanoporous silica material as a reversible optical probe for Hg2+ ion in water

A novel organic–inorganic silica‐based fluorescent probe was designed, synthesized and characterized by different techniques such as XRD, BET, TGA, and FT‐IR. The fluorescence properties of the probe were studied in the presence of a variety of metal‐ions in water. The results revealed that various metal‐ions negligibly vary the emission intensity of the probe except for Hg²⁺, which quenched the intensity dramatically. The selectivity of the probe toward Hg²⁺ ion was further investigated in the presence of common competing metal‐ions and the results demonstrated the high selectivity of the probe toward Hg²⁺ ion. The fluorescence emission of the probe was also studied as a function of the concentration of Hg²⁺ ion. A nanomolar limit of detection was estimated for Hg²⁺, indicating a high sensitivity. Furthermore, the probe showed INHIBIT‐type logic behavior with Hg²⁺ and H⁺ as inputs. Also, the optimum pH range was studied in addition to reversibility and real world applicability of the probe.     

A New 3,5‐Bisporphyrinylpyridine Derivative as a Fluorescent Ratiometric Probe for Zinc Ions

A new 3,5‐disubstituted pyridine with two porphyrin moieties was prepared through an efficient synthetic approach involving 2‐formyl‐5,10,15,20‐tetraphenylporphyrin ( 1 ), piperidine, and catalytic amounts of [La(OTf)₃]. 3,5‐Bis(5,10,15,20‐tetraphenylporphyrin‐2‐ylmethyl)pyridine ( 2 ) was fully characterized and its sensing ability towards Zn²⁺, Cu²⁺, Hg²⁺, Cd²⁺, and Ag⁺ was evaluated in solution by absorption and fluorescence spectroscopy and in gas phase by using matrix‐assisted laser desorption/ionization (MALDI)‐TOF mass spectrometry. Strong changes in the ground and excited state were detected in the case of the soft metal ions Zn²⁺, Cd²⁺, Hg²⁺, and Cu²⁺. A three‐metal‐per‐ligand molar ratio was obtained in all cases and a significant ratiometric behavior was observed in the presence of Zn²⁺ with the appearance of a new band at 608 nm, which can be assigned to a metal‐to‐ligand charge transfer. The system was able to quantify 79 ppb of Zn²⁺ and the theoretical calculations are in accordance with the stoichiometry observed in solution. The gas‐phase sensorial ability of compound 2 towards all metal ions was confirmed by using MALDI‐TOF MS and in solid state by using polymeric films of polymethylmethacrylate (PMMA) doped with ligand 2 . The results showed that compound 2 can be analytically used to develop new colorimetric molecular devices that are able to discriminate between Hg²⁺ and Zn²⁺ in solid phase. The crystal structure of Zn^II complex of 3,5‐bisporphyrinylpyridine was unequivocally elucidated by using single‐crystal X‐ray diffraction studies.     

Synthesis of a novel poly(para‐phenylene ethynylene) for highly selective and sensitive sensing mercury (II) ions

A new poly(p‐phenylene ethynylene) derivative with pendant 2,2′‐bipyridyl groups and glycol units (PPE‐bipy) has been prepared, and its metal ion sensing properties were investigated. The polymer of PPE‐bipy exhibited high selectivity for Hg²⁺ as compared with Li⁺, Na⁺, K⁺, Ba²⁺, Ca²⁺, Mg²⁺, Al³⁺, Mn²⁺, Ag⁺, Zn²⁺, Pb²⁺, Ni²⁺, Cd²⁺, Cu²⁺, Co,²⁺ and Fe³⁺ in THF/EtOH (1:1, v/v) solution. The fluorescence of PPE‐bipy was efficiently quenched by Hg²⁺ ions, and the detection limit was found to be 8.0 nM in a THF/EtOH (1:1, v/v) solvent system. PPE‐bipy also showed a selective chromogenic behavior toward Hg²⁺ ions by changing the color of the solution from slight yellow to colorless, which can be detected with the naked eye. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1998–2007, 2008     

A Highly Copper‐Selective Ratiometric Fluorescent Sensor Based on BODIPY

A new ratiometric fluorescent sensor ( 1 ) for Cu²⁺ based on 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) with di(2‐picolyl)amine (DPA) as ion recognition subunit has been synthesized and investigated in this work. The binding abilities of 1 towards different metal ions such as alkali and alkaline earth metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺) and other metal ions ( Ba²⁺, Zn²⁺, Cd²⁺, Fe²⁺, Fe³⁺, Pb²⁺, Ni²⁺, Co²⁺, Hg²⁺, Ag⁺) have been examined by UV‐vis and fluorescence spectroscopies. 1 displays high selectivity for Cu²⁺ among all test metal ions and a ～10‐fold fluorescence enhancement in I₅₈₂/I₅₅₈ upon excitation at visible excitation wavelength. The binding mode of 1 and Cu²⁺ is a 1:1 stoichiometry determined via studies of Job plot, the nonlinear fitting of the fluorometric titration and ESI mass.     

Reversible and Highly Selective Fluorescent Sensor for Mercury(II) Based on a Water‐Soluble Poly(para‐phenylene)s Containing Thymine and Sulfonate Moieties

A novel water‐soluble poly(para‐phenylene) derivative with pendant thymine and sulfonate units (PBTS) has been prepared and its metal ion sensing properties have been investigated. PBTS exhibited a reversible and selective fluorescence quenching behavior toward Hg²⁺ ions as compared to Ag⁺, Ni²⁺, Mg²⁺, Ca²⁺, Hg²⁺, Co²⁺, Cd²⁺, Cu²⁺, Pb²⁺, Ba²⁺, Fe³⁺, and Zn²⁺ ions in aqueous solution. The fluorescence quenching resulted from the interpolymeric π‐stacking aggregation which was induced by the specific thymine–Hg–thymine interaction.

     

A Simple and Highly Sensitive Electrochemically Reduced p‐Nitrobenzoic Acid Film Modified Sensor for Determination of Mercury

Herein, a simple electrochemical sensor was fabricated for sensing Hg²⁺ ions by using electrochemically reduced p‐nitrobenzoic acid molecules modified (ERpNBA) glassy carbon electrode (GCE). The modified electrode was applied for the determination of Hg²⁺ ions by using differential pulse anodic stripping voltammetry (DPASV). Experimental parameters such as concentration of p‐nitrobenzoic acid used for electrode modification, pH, accumulation time and deposition potential used for the determination of Hg²⁺ ions were optimized. The strong interaction between the Hg²⁺ ions and the lone pair of electrons on the nitrogen atoms of ERpNBA molecules leads to highly selective adsorption of Hg²⁺ ions on the modified electrode. Under the optimum experimental conditions, the sensor showed higher sensitivity and very low detection limit for Hg²⁺ ions than other metal ions such as Cd²⁺, Pb²⁺ and Zn²⁺ ions. The LOD for Hg²⁺ ions was 240 pM which is below the guideline value given by the World Health Organization and the earlier reports.     

Calix[4]Resorcinarene Macrocycles Interactions with Cd2+, Hg2+, Pb2+, and Cu2+ Cations: A QCM‐I and Langmuir Ultra‐thin Monolayers Study

Stable ultra‐thin Langmuir monolayers of calix[4]resorcinarene derivatives, namely: C‐dec‐9‐enylcalix[4]resorcinarene‐O‐(R+)‐α‐methylbenzylamine (Ionophore I ), and C‐dec‐9‐enylcalix[4]resorcinarene‐O‐(S‐)‐α‐methylbenzylamine (Ionophore II ), were prepared at the air‐water interface. Their interactions with a series of heavy metals (HM) ions (Cu²⁺, Pb²⁺, Hg²⁺ and Cd²⁺) present in the aqueous subphase were investigated by measuring surface pressure‐area isotherms, at different concentrations. The surface pressure‐area (Π‐A) isotherms were stable and demonstrated the HM amounts influence on the limiting area (A_lim) values, therefore confirming the examined macrocycles capability to host the metallic toxicants. Additionally, a HM concentration dependence was realized and interpreted by a selective tendency of both ionophores towards Cu²⁺ and Cd²⁺ ions over Pb²⁺ and Hg²⁺, especially at high concentrations. The HM ions interactions with the applied calix[4]resorcinarene Langmuir ultra‐thin monolayers were interpreted based on the Gibbs‐Shishkovsky adsorption equation. Moreover, quartz crystal microbalance with impedance measurement (QCM‐I), was applied for the detection of HM ions in solutions. The QCM‐I results showed the effectiveness of the coated QCM‐I crystals in detecting the ions at different concentrations. The detection limit values were in the order of 0.16, 0.3, 0.65, 1.1 ppm (Ionophore I), as well 0.11, 0.45, 0.2, 0.89 (Ionophore II) for the Cu²⁺, Pb²⁺, Hg²⁺ and Cd²⁺ cations, respectively. Additionally, a selective tendency of both ionophores towards copper ions was shown.     

Membrane Transport of Pb(II) with a Cooperative Carrier Composed of Dibenzyldiaza‐18‐Crown‐6 and Palmitic Acid

A chloroform membrane system containing a given mixture of dibenzyldiaza‐18‐crown‐6 and palmetic acid was applied for transport of Pb²⁺ ions. The transport was capable of moving metal ions “uphill”. Thus, it was possible to follow the transfer of Pb(II) from the aqueous source phase to the organic layer and from the organic layer to the receiving phase. The effects of thiosulfate concentration in the receiving phase, palmetic acid and dibenzyldiaza‐18‐crown‐6 concentration in the organic phase on the efficiency of the transport system were examined. By using S₂O₃^2? ion as metal ion acceptor in the receiving phase, the amount of lead ion transport across the liquid membrane after 150 minutes is 96 ± 1.5%. The selectivity and efficiency of lead transport from aqueous solution containing Cu²⁺, Tl⁺, Ag⁺, Co²⁺, Ni²⁺, Mg²⁺, Zn²⁺, Hg²⁺, Cd²⁺, Ca²⁺ were investigated. In the presence of thiosulfate as a suitable masking agent in the source phase, the interfering effects of Ag⁺ and Cu²⁺ were diminished drastically.     

The Stability of Metal N,N,N′,N′‐Tetrakis(2‐aminoethyl)ethane‐ 1,2‐diamine (=penten) Complexes and the X‐Ray Crystal Structure of [Tl(NO3)(penten)](NO3)2

Complex formation between N,N,N′,N′‐tetrakis(2‐aminoethyl)ethane‐1,2‐diamine (penten) and the metal ions Mn²⁺, Co²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Ag⁺, Pb²⁺, and Tl³⁺ (in 1.00M NaNO₃ and 25°) was investigated by potentiometry and spectrophotometry. These are the first reported values of the stability constants for this ligand with Ag⁺, Pb²⁺, and Tl³⁺. The X‐ray crystal structure of [Tl(NO₃)(penten)](NO₃)₂ was determined. In this structure, Tl³⁺ shows a coordination number of seven made up of the six N‐donors and one O‐atom of NO.     

Design of Ratiometric Fluorescent Probes Based on Arene–Metal‐Ion Interactions and Their Application to CdII and Hydrogen Sulfide Imaging in Living Cells

Non‐coordinative interactions between a metal ion and the aromatic ring of a fluorophore can act as a versatile sensing mechanism for the detection of metal ions with a large emission change of fluorophores. We report the design of fluorescent probes based on arene–metal‐ion interactions and their biological applications. This study found that various probes having different fluorophores and metal binding units displayed significant emission redshift upon complexation with metal ions, such as Ag^I, Cd^II, Hg^II, and Pb^II. X‐ray crystallography of the complexes confirmed that the metal ions were held in close proximity to the fluorophore to form an arene–metal‐ion interaction. Electronic structure calculations based on TDDFT offered a theoretical basis for the sensing mechanism, thus showing that metal ions electrostatically modulate the energy levels of the molecular orbitals of the fluorophore. A fluorescent probe was successfully applied to the ratiometric detection of the uptake of Cd^II ions and hydrogen sulfide (H₂S) in living cells. These results highlight the utility of interactions between arene groups and metal ions in biological analyses.     

Linear and Star-Shaped Extended Di- and Tristyrylbenzenes: Synthesis,Characterization and Optical Response to Acid and Metal Ions

Two linear 1,4-distyrylbenzenes and five star-shaped 1,3,5-tristyrylbenzene derivatives ( L_2a and L_2b , Y₀–Y₃ and Y_NBu ) were synthesized and spectroscopically characterized. The photophysical properties, optical response to acid and metal ions were investigated. Upon backbone extension of linear distyrylbenzenes or the introduction of dibutylanilines, the electronic spectra are redshifted. Incorporation of electron-deficient pyridyl units does not significantly affect the optical properties. Variation of the number of pyridine rings and substitution pattern tune the fluorescence response to acids and metal ions. The novel arenes discriminate Al³⁺, Mn²⁺, Fe³⁺, Fe²⁺, Cd²⁺, Ag⁺ and Hg²⁺.     

A Bis‐Oxime Derivative of Diaza‐18‐Crown‐6 as an Ionophore for Silver Ion

A new pendant‐arm derivative of diaza‐18‐crown‐6, containing two oxime donor groups, has been synthesized and incorporated into a polyvinyl chloride (PVC) membrane ion‐selective electrode. The electrode shows selectivity for Ag⁺ ion, with a near Nernstian response. Pb²⁺, Cu²⁺, Hg²⁺, and Tl⁺ are major interfering ions, with Cd²⁺ having minor interference. The electrode shows no potentiometric response for the ions Mg²⁺, Al³⁺, K⁺, Ca²⁺, Ni²⁺, Fe³⁺, and La³⁺, and is responsive to H⁺ at pH<6.     

Study on the Liquid‐Solid Flotation Separation of Cadmium by Ammonium Sulfate‐Potassium Iodide‐Cetylpyridine Chloride‐Water System

The liquid‐solid flotation separation behaviors of Cd²⁺ in ammonium sulfate‐potassium iodide‐cetylpyridine chloride‐water system and the conditions for the separation of Cd²⁺ from other metal ions were studied. The results showed that in the presence of 1.0 g (NH₄)₂SO₄ and when the dosage of 0.1 M potassium iodide was 2.0 mL and 0.01 M cetylpyridine chloride (CPC) solution was 1.0 mL respectively, the formed water‐insoluble ternary association complex of KI‐CPC‐Cd floated above water phase and liquid‐solid phases were formed with clear interface. In this condition, Zn²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺ and Al³⁺ could not be floated and Cd²⁺ was floated quantitatively at pH 5.0. Therefore, the quantitative separation of Cd²⁺ from the above metal ions could be achieved. The quantitative flotation separation determination of Cd²⁺ in the sample of synthetic water and industrial waster water was performed, and the results agreed well with those by AAS method. The recoveries were 97.2%～102.4%, and the RSD was 1.8%.     

Water‐soluble hyperbranched polyelectrolytes with high fluorescence quantum yield: Facile synthesis and selective chemosensor for Hg2+ and Cu2+ ions

New water‐soluble hyperbranched polyfluorenes bearing carboxylate side chains have been synthesized by the simple “A2 + B2 + C3” protocol based on Suzuki coupling polymerization. The linear polyfluorene analogue LPFA was also synthesized for comparative investigation. The optical properties of the neutral precursory polymers in CHCl₃ and final carboxylic‐anionic conjugated polyelectrolytes in buffer solution were investigated. The obtained hyperbranched polyelectrolyte HPFA2 with lower content of branch unit (2%) showed excellent solubility and high fluorescence quantum yield (?_F = 89%) in aqueous solution. Fluorescence quenching of HPFA2 by different metal ions was also investigated, the polyelectrolyte showed high selectivity for Hg²⁺ and Cu²⁺ ions relative to other various metal ions in buffer solution. The Stern‐Volmer constant K_sv was determined to be 0.80 × 10⁶ M^?1 for Hg²⁺ and 3.11 × 10⁶ M^?1 for Cu²⁺, respectively, indicating the potential application of HPFA2 as a highly selective and sensitive chemosensor for Hg²⁺ and Cu²⁺ ions in aqueous solution. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3431–3439, 2010