Two new bithiophene imide (BTI)‐based n‐type polymers were synthesized. f‐BTI2‐FT based on a fused BTI dimer showed a smaller band gap, a lower LUMO, and higher crystallinity than s‐BTI2‐FT containing a BTI dimer connected through a single bond. s‐BTI2‐FT exhibited a remarkable electron mobility of 0.82 cm2 V−1 s−1, and f‐BTI2‐FT showed a further improved mobility of 1.13 cm2 V−1 s−1 in transistors. When blended with the polymer donor PTB7‐Th, f‐BTI2‐FT‐based all‐polymer solar cells (all‐PSCs) attained a PCE of 6.85 %, the highest value for an all‐PSC not based on naphthalene (or perylene) diimide polymer acceptors. However, s‐BTI2‐FT all‐PSCs showed nearly no photovoltaic effect. The results demonstrate that f‐BTI2‐FT is one of most promising n‐type polymers and that ring fusion offers an effective approach for designing polymers with improved electrical properties. 相似文献
Over the past few years, non‐fullerene organic solar cells have been a focus of research and their power conversion efficiencies have been improved dramatically from about 6 % to over 14 %. In addition to innovations in non‐fullerene acceptors, the ongoing development of polymer donors has contributed significantly to the rapid progress of non‐fullerene organic solar cell performance. This Minireview highlights the polymer donors that enable high‐performance non‐fullerene organic solar cells. We show the impressive photovoltaic devices results achieved by some of important classes of conjugated polymer systems in non‐fullerene organic solar cells. We discuss the molecular design strategies as far as developing matching polymer donors for non‐fullerene acceptors. We conclude with a brief summary and outlook for advances in donor polymers required for commercialization. 相似文献
Demonstrated in this work is a simple random ternary copolymerization strategy to synthesize a series of polymer acceptors, PTPBT‐ETx, by polymerizing a small‐molecule acceptor unit modified from Y6 with a thiophene connecting unit and a controlled amount of an 3‐ethylesterthiophene (ET) unit. Compared to PTPBT of only Y6‐like units and thiophene units, PTPBT‐ETx (where x represents the molar ratio of the ET unit) with an incorporated ET unit in the ternary copolymers show up‐shifted LUMO energy levels, increased electron mobilities, and improved blend morphologies in the blend film with the polymer donor PBDB‐T. And the all‐polymer solar cell (all‐PSC) based on PBDB‐T:PTPBT‐ET0.3 achieved a high power conversion efficiency over 12.5 %. In addition, the PTPBT‐ET0.3‐based all‐PSC also exhibits long‐term photostability over 300 hours. 相似文献
All‐polymer solar cells (all‐PSCs) can offer unique advantages for applications in flexible devices, and naphthalene diimide (NDI)‐based polymer acceptors are the widely used polymer acceptors. However, their power conversion efficiency (PCE) still lags behind that of state‐of‐the‐art polymer solar cells, due to low light absorption, suboptimal energy levels and the strong aggregation of the NDI‐based polymer acceptor. Herein, a rhodanine‐based dye molecule was introduced into the NDI‐based polymer acceptor by simple random copolymerization and showed an improved light absorption coefficient, an up‐shifted lowest unoccupied molecular orbital level and reduced crystallization. Consequently, additive‐free all‐PSCs demonstrated a high PCE of 8.13 %, which is one of the highest performance characteristics reported for all‐PSCs to date. These results indicate that incorporating a dye into the n‐type polymer gives insight into the precise design of high‐performance polymer acceptors for all‐PSCs. 相似文献
A new balanced donor–acceptor molecule, namely, benzodithiophene (BDT)‐rhodanine‐[6,6]‐phenyl‐C71 butyric acid methyl ester (Rh‐PC71BM) comprising two covalently linked blocks, a p‐type oligothiophene‐containing BDT‐based moiety and an n‐type PC71BM unit was designed and synthesized. The single‐component organic solar cell (SCOSC) fabricated from Rh‐PC71BM molecules showed a power conversion efficiency (PCE) of 3.22 % with an open‐circuit voltage (Voc) of 0.98 V. These results rank are among the highest values for SCOSCs based on a monomolecular material. In particular, the one‐molecule Rh‐PC71BM device exhibits excellent thermal stability compared to reference Rh‐OH:PC71BM device. The success of our monomolecular strategy can provide a new way to develop high‐performance SCOSCs. 相似文献
High‐molecular‐weight conjugated polymer HD‐PDFC‐DTBT with N‐(2‐hexyldecyl)‐3,6‐difluorocarbazole as the donor unit, 5,6‐bis(octyloxy)benzothiadiazole as the acceptor unit, and thiophene as the spacer is synthesized by Suzuki polycondensation. HD‐PDFC‐DTBT shows a large bandgap of 1.96 eV and a high hole mobility of 0.16 cm2 V−1 s−1. HD‐PDFC‐DTBT:PC71BM‐based inverted polymer solar cells (PSCs) give a power conversion efficiency (PCE) of 7.39% with a Voc of 0.93 V, a Jsc of 14.11 mA cm−2, and an FF of 0.56.
With perovskite‐based solar cells (PSCs) now reaching efficiencies of greater than 20 %, the stability of PSC devices has become a critical challenge for commercialization. However, most efficient hole‐transporting materials (HTMs) thus far still rely on the state‐of‐the‐art methoxy triphenylamine (MOTPA) donor unit in which methoxy groups usually reduce the device stability. Herein, a carbazole‐fluorene hybrid has been employed as a methoxy‐free donor to construct organic HTMs. The indeno[1,2‐b]carbazole group not only inherits the characteristics of carbazole and fluorene, but also exhibits additional advantages arising from the bulky planar structure. Consequently, M129, endowed with indeno[1,2‐b]carbazole simultaneously exhibits a promising efficiency of over 20 % and superior long‐term stability. The hybrid strategy toward the methoxy‐free donor opens a new avenue for developing efficient and stable HTMs. 相似文献
A series of dipolar donor–acceptor (D –A) chromophores with aminothiophene donor and different heterocyclic acceptor units is reported. By modulation of the acceptor strength, absorption bands over the whole visible spectrum are accessible as well as adjustment of the frontier molecular orbital levels. The performance of the chromophores in blends with fullerene acceptors in solution‐processed bulk heterojunction solar cells was studied and related to the molecular properties of the dyes. In particular, the effect of the large ground‐state dipole moments of these dyes was investigated by single crystal X‐ray analysis, which revealed antiparallel dimers, resulting in an annihilation of the dipole moments. This specific feature of supramolecular organization explains the excellent performance of merocyanine dyes in organic solar cells. With blends of HB366 :PC71BM, the most efficient solar cell with a VOC of 1.0 V, a JSC of 10.2 mA cm−2, and a power‐conversion efficiency of 4.5 % was achieved under standard AM1.5, 100 mW cm−2 conditions. Under reduced lighting conditions, even higher efficiencies up to 5.1 % was obtained. 相似文献
The crystalline cooperativity of the donor and acceptor segment in double‐cable conjugated polymers plays an important role in the nanophase separation and photovoltaic performance in single‐component organic solar cells (SCOSCs). Two double‐cable conjugated polymers with the same conjugated backbone and perylene bisimide (PBI) side units were designed in which PBIs were positioned symmetrically and perpendicularly ( P1 ) and asymmetrically and slantingly ( P2 ) along the conjugated backbones. After thermal annealing, both conjugated backbones and PBI side units in P1 tend to form ordered nanostructures, while PBI side units in P2 dominated the crystallization and hamper the crystallization of conjugated backbones. P1 showed good crystalline cooperativity between conjugated backbones and PBI side units, resulting in improved power conversion efficiencies (PCEs) up to 3.43 % in SCOSCs, while P2 with poor crystalline cooperativity exhibited PCEs below 2.42 %. 相似文献
A new broad bandgap and 2D‐conjugated D‐A copolymer, PBDTBTz‐T , based on bithienyl‐benzodithiophene donor unit and bithiazole (BTz) acceptor unit, is designed and synthesized for the application as donor material in polymer solar cells (PSCs). The polymer possesses highly coplanar and crystalline structure with a higher hole mobility and lower HOMO energy level which is beneficial to achieve higher open circuit voltage (Voc) of the PSCs with the polymer as donor. The PSCs based on PBDTBTz‐T :PC71BM blend film with a lower PC71BM content of 40% demonstrate a power conversion efficiency (PCE) of 6.09% with a relatively higher Voc of 0.92 V. These results indicate that the lower HOMO energy level of the BTz‐based D–A copolymer is beneficial to a high Voc of the PSCs. The polymer, with highly coplanar and crystalline structure, can effectively reduce the content of fullerene acceptor in the active layer and can enhance the absorption and PCE of the PSCs.