Switching on the Metathesis Activity of Re Oxo Alkylidene Surface Sites through a Tailor‐Made Silica–Alumina Support

Re oxo alkylidene surface species are putative active sites in classical heterogeneous Re‐based alkene‐metathesis catalysts. However, the lack of evidence for such species questions their existence and/or relevance as reaction intermediates. Using Re(O)(=CH‐CH=CPh₂)(OtBu_F6)₃(THF), the corresponding well‐defined Re oxo alkylidene surface species can be generated on both silica and silica–alumina supports. While inactive on the silica support, it displays very good activity, even for functionalized olefins, on the silica–alumina support.     

Organic solvent‐free catalytic hydrogenation of diene‐based polymer nanoparticles in latex form. Part II. Kinetic analysis and mechanistic study

The central challenge that has limited the development of catalytic hydrogenation of diene‐based polymer latex (i.e., latex hydrogenation) in large‐scale production pertains to how to accomplish the optimal interplay of accelerating the hydrogenation rate, decreasing the required quantity of catalyst, and eliminating the need for an organic solvent. Here, we attempt to overcome this dilemma through decreasing the dimensions of the polymer substrate (such as below 20 nm) used in the hydrogenation process. Very small diene‐based polymer nanoparticles were synthesized and then used as the substrates for the subsequent latex hydrogenation. The effects of particle size, temperature, and catalyst concentration on the hydrogenation rate were fully investigated. An apparent first‐order kinetic model was proposed to describe the rate of hydrogen uptake with respect to the concentration of the olefinic substrate (C?C). Mass transfer of both the hydrogen and catalyst involved in this solid (polymer)–liquid (water)–gas (hydrogen) three‐phase latex system is discussed. The competitive coordination of the catalyst between the C?C and acrylonitrile units within the copolymer was elucidated. It was found that (1) using very small diene‐based polymer nanoparticles as the substrate, the hydrogenation rate of polymer latex can be increased vastly to achieve a high conversion of 95% while a quite low level of catalyst loading is required; (2) this latex hydrogenation process was completely free of organic solvent and no cross‐linking was found; (3) the mass transfer of hydrogen is not a rate‐determining step in the present hydrogenation reactions; (4) the catalyst was dispersed homogeneously within the polymer nanoparticles; (5) for the reaction that has reached about 95 mol % conversion, the kinetic study shows that the reaction is chemically controlled with an apparent activation energy of 100–110 kJ/mol; (6) the strong coordination of C[tbond]N to the catalytically active species RhH₂Cl(PPh₃)₂ imposed a negative effect on the hydrogenation activity. The present research provides a comprehensive study to appreciate the underlying chemistry of latex hydrogenation of diene‐based polymer nanoparticles and more importantly shows great promise toward the commercialization of a “green” catalytic hydrogenation operation of a diene‐based polymer latex in industry. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Magnetically water‐dispersible and recoverable rhodium organometallic catalyst derived from Wilkinson's catalyst for promoting organic reactions

A novel magnetic rhodium catalyst was prepared through immobilizing Wilkinson's catalyst on the surface of silica‐coated iron oxide nanoparticles. After (thio)diphenylphosphine (─S&─PPh₂) was modified on the surface of the silica‐coated iron oxide nanoparticles, tris(triphenylphosphine)rhodium(I) chloride was employed to synthesize the Rh(Cl)(PPh₃)₂(Ph₂P&─S&─) complex, affording a rhodium loading of 0.16 mmol g⁻¹. The Rh(I) organometallic magnetic nanoparticles form a novel class of heterogeneous catalyst which is particularly suitable for the practice of organic synthesis. The prepared system exhibits high catalytic efficiency in Suzuki–Miyaura and Miyaura–Michael reactions in ethanol–water solution. High yield, low reaction times, use of green solvents and non‐toxicity of the catalyst are the main merits of this protocol. Also, magnetic separation is an environmentally friendly alternative for the recovery of the catalyst, since it minimizes energy and catalyst loss by preventing mass loss and oxidation. The produced catalyst was characterized using a variety of techniques.     

Pd@tetrahedral hollow magnetic nanoparticles coated with N‐doped porous carbon as an efficient catalyst for hydrogenation of nitroarenes

Hollow magnetic nanoparticles (MNPs) with tetrahedral morphology were synthesized and then covered by a shell prepared by coating with melamine–formaldehyde followed by the introduction of glucose‐derived carbon. Subsequently, Pd nanoparticles were immobilized and the core–shell nanocomposite was carbonized. The obtained magnetic catalyst was successfully applied for the hydrogenation of nitroarenes in aqueous media. To investigate the effects of the morphology of MNPs, the nature of carbon shell, and the order of incorporation of Pd nanoparticles, several control catalysts, including the MNPs with different morphologies (disc‐like and cylinder); MNPs coated with different shells (sole glucose‐derived carbon or melamine–formaldehyde carbon shell); and a nanocomposite, in which Pd was immobilized after carbonization, were prepared and examined as catalyst for the model reaction. To justify the observed different catalytic activities of the catalysts, their Pd loadings, leaching, and specific surface areas were compared. The results confirmed that tetrahedral MNPs coated with porous N‐rich carbon shell exhibited the best catalytic activity. The high catalytic activity of this catalyst was attributed to its high surface area and the interaction of N‐rich shell with Pd nanoparticles that led to the higher Pd loading and suppressed Pd leaching.     

Selective Amplification of CO Bond Hydrogenation on Pt/TiO2: Catalytic Reaction and Sum‐Frequency Generation Vibrational Spectroscopy Studies of Crotonaldehyde Hydrogenation

The hydrogenation of crotonaldehyde in the presence of supported platinum nanoparticles was used to determine how the interaction between the metal particles and their support can control catalytic performance. Using gas‐phase catalytic reaction studies and in situ sum‐frequency generation vibrational spectroscopy (SFG) to study Pt/TiO₂ and Pt/SiO₂ catalysts, a unique reaction pathway was identified for Pt/TiO₂, which selectively produces alcohol products. The catalytic and spectroscopic data obtained for the Pt/SiO₂ catalyst shows that SiO₂ has no active role in this reaction. SFG spectra obtained for the Pt/TiO₂ catalyst indicate the presence of a crotyl‐oxy surface intermediate. By adsorption through the aldehyde oxygen atom to an O‐vacancy site on the TiO₂ surface, the C?O bond of crotonaldehyde is activated, by charge transfer, for hydrogenation. This intermediate reacts with spillover H provided by the Pt to produce crotyl alcohol.     

Planting of bis(1,5‐cyclooctadiene) nickel upon silica to harvest NiO (<5 nm) nanoparticles in a silica matrix

Bis(1,5‐cyclooctadiene) nickel [Ni(COD)₂] was employed as a nickel precursor to prepare nickel oxide nanoparticles upon high‐surface‐area mesoporous silica. Under protection of argon, Ni(COD)₂ was dissolved in tetrahydrofuran (THF) to react with surface silanols of mesoporous silica SBA‐15, which formed a black powder after completion of the surface reaction. Calcination of the powder produced ultrafine NiO inside the mesoporous silica matrix, which was evidenced by X‐ray diffraction, N₂ adsorption–desorption, transmission electron microscopy and thermogravimetric analysis. The thermogravimetric analysis suggests that NiO formation is a result of surface nickel species calcination, whereas structural characterization clearly show that NiO nanoparticles of <5 nm are evenly distributed inside the silica SBA‐15 matrix and mesoporosity is well preserved upon calcinations and NiO formation. The surface reaction between Ni(COD)₂ and surface silanols was found for the first time, and the method used here may be extended conveniently to prepare other metal oxide nanoparticles upon high‐surface‐area supports as well. Copyright © 2005 John Wiley & Sons, Ltd.     

A General Catalyst Based on Cobalt Core–Shell Nanoparticles for the Hydrogenation of N‐Heteroarenes Including Pyridines

Herein, we report the synthesis of specific silica‐supported Co/Co₃O₄ core–shell based nanoparticles prepared by template synthesis of cobalt‐pyromellitic acid on silica and subsequent pyrolysis. The optimal catalyst material allows for general and selective hydrogenation of pyridines, quinolines, and other heteroarenes including acridine, phenanthroline, naphthyridine, quinoxaline, imidazo[1,2‐a]pyridine, and indole under comparably mild reaction conditions. In addition, recycling of these Co nanoparticles and their ability for dehydrogenation catalysis are showcased.     

Facile Fabrication of Well‐Dispersed Pt Nanoparticles in Mesoporous Silica with Large Open Spaces and Their Catalytic Applications

In this paper, a facile strategy is reported for the preparation of well‐dispersed Pt nanoparticles in ordered mesoporous silica (Pt@OMS) by using a hybrid mesoporous phenolic resin‐silica nanocomposite as the parent material. The phenolic resin polymer is proposed herein to be the key in preventing the aggregation of Pt nanoparticles during their formation process and making contributions both to enhance the surface area and enlarge the pore size of the support. The Pt@OMS proves to be a highly active and stable catalyst for both gas‐phase oxidation of CO and liquid‐phase hydrogenation of 4‐nitrophenol. This work might open new avenues for the preparation of noble metal nanoparticles in mesoporous silica with unique structures for catalytic applications.     

Magnetic nanoparticle‐tethered Schiff base–palladium(II): Highly active and reusable heterogeneous catalyst for Suzuki–Miyaura cross‐coupling and reduction of nitroarenes in aqueous medium at room temperature

As a continuation of our efforts to develop new heterogeneous nanomagnetic catalysts for greener reactions, we identified a Schiff base–palladium(II) complex anchored on magnetic nanoparticles (SB‐Pd@MNPs) as a highly active nanomagnetic catalyst for Suzuki–Miyaura cross‐coupling reactions between phenylboronic acid and aryl halides and for the reduction of nitroarenes using sodium borohydride in an aqueous medium at room temperature. The SB‐Pd@MNPs nanomagnetic catalyst shows notable advantages such as simplicity of operation, excellent yields, short reaction times, heterogeneous nature, easy magnetic work up and recyclability. Characterization of the synthesized SB‐Pd@MNPs nanomagnetic catalyst was performed with various physicochemical methods such as attenuated total reflectance infrared spectroscopy, UV–visible spectroscopy, inductively coupled plasma atomic emission spectroscopy, energy‐dispersive X‐ray spectroscopy, field‐emission scanning electron microscopy, transmission electron microscopy, powder X‐ray powder diffraction, thermogravimetric analysis and Brunauer–Emmett–Teller surface area analysis.     

Synergism of Pt nanoparticles and iron oxide support for chemoselective hydrogenation of nitroarenes under mild conditions

An efficient and low-cost supported Pt catalyst for hydrogenation of niroarenes was prepared with colloid Pt precursors and α-Fe₂O₃ as a support. The catalyst with Pt content as low as 0.2 wt% exhibits high activities, chemoselectivities and stability in the hydrogenation of nitrobenzene and a variety of niroarenes. The conversion of nitrobenzene can reach 3170 mol_conv h^?1 mol_Pt^?1 under mild conditions (30 °C, 5 bar), which is much higher than that of commercial Pt/C catalyst and many reported catalysts under similar reaction conditions. The spatial separation of the active sites for H₂ dissociation and hydrogenation should be responsible for the high chemoselectivity, which decreases the contact possibility between the reducible groups of nitroarenes and Pt nanoparticles. The unique surface properties of α-Fe₂O₃ play an important role in the reaction process. It provides active sites for hydrogen spillover and reactant adsorption, and ultimately completes the hydrogenation of the nitro group on the catalyst surface.     

Synthesis,Solid‐State NMR Characterization,and Application for Hydrogenation Reactions of a Novel Wilkinson’s‐Type Immobilized Catalyst

Silica nanoparticles (SiNPs) were chosen as a solid support material for the immobilization of a new Wilkinson’s‐type catalyst. In a first step, polymer molecules (poly(triphenylphosphine)ethylene (PTPPE); 4‐diphenylphosphine styrene as monomer) were grafted onto the silica nanoparticles by surface‐initiated photoinferter‐mediated polymerization (SI‐PIMP). The catalyst was then created by binding rhodium (Rh) to the polymer side chains, with RhCl₃ ? x H₂O as a precursor. The triphenylphosphine units and rhodium as Rh^I provide an environment to form Wilkinson’s catalyst‐like structures. Employing multinuclear (³¹P, ²⁹Si, and ¹³C) solid‐state NMR spectroscopy (SSNMR), the structure of the catalyst bound to the polymer and the intermediates of the grafting reaction have been characterized. Finally, first applications of this catalyst in hydrogenation reactions employing para‐enriched hydrogen gas (PHIP experiments) and an assessment of its leaching properties are presented.     

Bifunctional Heterogeneous Catalysis of Silica–Alumina‐Supported Tertiary Amines with Controlled Acid–Base Interactions for Efficient 1,4‐Addition Reactions

We report the first tunable bifunctional surface of silica–alumina‐supported tertiary amines (SA–NEt₂) active for catalytic 1,4‐addition reactions of nitroalkanes and thiols to electron‐deficient alkenes. The 1,4‐addition reaction of nitroalkanes to electron‐deficient alkenes is one of the most useful carbon–carbon bond‐forming reactions and applicable toward a wide range of organic syntheses. The reaction between nitroethane and methyl vinyl ketone scarcely proceeded with either SA or homogeneous amines, and a mixture of SA and amines showed very low catalytic activity. In addition, undesirable side reactions occurred in the case of a strong base like sodium ethoxide employed as a catalytic reagent. Only the present SA‐supported amine (SA–NEt₂) catalyst enabled selective formation of a double‐alkylated product without promotions of side reactions such as an intramolecular cyclization reaction. The heterogeneous SA–NEt₂ catalyst was easily recovered from the reaction mixture by simple filtration and reusable with retention of its catalytic activity and selectivity. Furthermore, the SA–NEt₂ catalyst system was applicable to the addition reaction of other nitroalkanes and thiols to various electron‐deficient alkenes. The solid‐state magic‐angle spinning (MAS) NMR spectroscopic analyses, including variable‐contact‐time ¹³C cross‐polarization (CP)/MAS NMR spectroscopy, revealed that acid–base interactions between surface acid sites and immobilized amines can be controlled by pretreatment of SA at different temperatures. The catalytic activities for these addition reactions were strongly affected by the surface acid–base interactions.     

Chemoselective Hydrogenation of Functionalized Nitroarenes and Imines by Using Carbon Nanofiber‐Supported Iridium Nanoparticles

The reaction of three types of carbon nanofibers (CNFs; platelet: CNF‐P, tubular: CNF‐T, herringbone: CNF‐H) with Ir₄(CO)₁₂ in mesitylene at 165 °C provided the corresponding CNF‐supported iridium nanoparticles, Ir/CNFs (Ir content=2.3–2.6 wt. %). Transmission electron microscopy (TEM) studies of these Ir/CNF samples revealed that size‐controlled Ir nanoparticles (average particle size of 1.1–1.5 nm) existed on the CNFs. Among the three Ir/CNF samples, Ir/CNF‐T showed an excellent catalytic activity and chemoselectivity towards hydrogenation of functionalized nitroarenes and imines; the corresponding aniline derivatives were obtained with high turnover numbers at ambient temperature under 10 atm of H₂, and the catalyst is reusable. Ir/CNF‐T was also effective for the reductive N‐alkylation of anilines with carbonyl compounds.     

负载型Au-Ni合金催化剂应用于芳香硝基化合物选择加氢反应

采用改进的两步还原法制备了SiO2负载的Au-Ni合金催化剂,催化剂中Au-Ni纳米颗粒高度分散于SiO2载体表面. Au-Ni合金催化剂在温和条件下芳香硝基化合物选择加氢反应中表现出比两种单金属催化剂更高的活性和选择性,体现出Au-Ni之间明显的协同作用.其中AuNi3/SiO2催化剂具有最好的性能,反应70 min,转化率和选择性分别达到90.8%和93.0%.     

N‐heterocyclic carbene–palladium(II) complex supported on magnetic mesoporous silica for Heck cross‐coupling reaction

Magnetic mesoporous silica was prepared via embedding magnetite nanoparticles between channels of mesoporous silica (SBA‐15). The prepared composite (Fe₃O₄@SiO₂‐SBA) was then reacted with 3‐chloropropyltriethoxysilane, sodium imidazolide and 2‐bromopyridine to give 3‐(pyridin‐2‐yl)‐1H‐imidazol‐3‐iumpropyl‐functionalized Fe₃O₄@SiO₂‐SBA as a supported pincer ligand for Pd(II). The functionalized magnetic mesoporous silica was further reacted with [PdCl₂(SMe₂)₂] to produce a supported N‐heterocyclic carbene–Pd(II) complex. The obtained catalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, vibrating sample magnetometry, Brunauer–Emmett–Teller surface area measurement and X‐ray diffraction. The amount of the loaded complex was 80.3 mg g^?1, as calculated through thermogravimetric analysis. The formation of the ordered mesoporous structure of SBA‐15 was confirmed using low‐angle X‐ray diffraction and transmission electron microscopy. Also, X‐ray photoelectron spectroscopy confirmed the presence of the Pd(II) complex on the magnetic support. The prepared magnetic catalyst was then effectively used in the coupling reaction of olefins with aryl halides, i.e. the Heck reaction, in the presence of a base. The reaction parameters, such as solvent, base, temperature, amount of catalyst and reactant ratio, were optimized by choosing the coupling reaction of 1‐bromonaphthalene and styrene as a model Heck reaction. N‐Methylpyrrolidone as solvent, 0.25 mol% catalyst, K₂CO₃ as base, reaction temperature of 120°C and ultrasonication of the catalyst for 10 min before use provided the best conditions for the Heck cross‐coupling reaction. The best results were observed for aryl bromides and iodides while aryl chlorides were found to be less reactive. The catalyst exhibited noticeable stability and reusability.     

Vapour Phase Hydrogenation of Cinnamaldehyde over Nano Ni and Ni/SiMCM‐41 Catalysts

Ni nanoparticles (Ni(1) and Ni(2)) and Ni loaded SiMCM‐41 (15Ni/SiMCM‐41) were prepared and characterized with XRD, TEM, N₂ adsorption, CO chemisorption, and H₂‐TPR. The Ni specific surface area followed the order of 15Ni/SiMCM‐41 > Ni(1) >> Ni(2), whereas the Ni particle size exhibited the opposite trend. These catalysts were utilized for vapour phase hydrogenation of cinnamaldehyde at 1 atm and 200 °C in a fixed‐bed, down flow reactor. The main products include hydrocinnamaldehyde, styrene, ethylbenzene, and 2‐phenyl‐1‐propanol. The catalytic activity decreased in the same order as that of Ni specific surface areas. The SiMCM‐41 support possessed very large surface area, leading to enhanced dispersion and specific surface area of Ni nanoparticles. As a result, the 15Ni/SiMCM‐41 catalyst exhibited the highest activity. Based on the investigation of reaction pathways, it is important to emphasize that both hydrogenation and hydroelimination of formaldehyde (hydrodeformylation) occur in the vapour phase reaction.     

Biogenic Synthesis of Gold Nanoparticles on a Green Support as a Reusable Catalyst for the Hydrogenation of Nitroarene and Quinoline

Direct attachment of gold nanoparticles to a green support without the use of an external reducing agent and using it for removing toxic pollutants from wastewater, i. e., reduction of nitroarene to amine, are described. A novel approach involving the reduction of gold by the jute plant (Corchorus genus) stem-based (JPS) support itself to form nanoparticles (AuNPs) to be used as a catalytic system (‘dip-catalyst’) and its catalytic activity for the hydrogenation of series of nitroarenes in aqueous media are presented. AuNPs/JPS catalyst was characterized using SEM, UV-Vis, FTIR, TEM, XPS, and ICP-OES. Confined area elemental mapping exhibits uniform and homogeneous distribution of AuNPs on the support surface. TEM shows multi-faceted AuNPs in the range of 20–30 nm. The reactivity of AuNPs/JPS for the transfer hydrogenation of nitroarene as well as hydrogenation of quinoline under molecular H₂ pressure was evaluated. Sodium borohydride, when used as the hydrogen source, demonstrates a high catalytic efficiency in the transfer hydrogenation reduction of 4-nitrophenol (4-NP). Quinoline is quantitatively and chemoselectively hydrogenated to 1,2,3,4-tetrahydroquinoline (py-THQ) using molecular hydrogen. Reusability studies show that AuNPs are stable on the support surface and their selectivity is not affected.     

Synthetic and natural silica‐aluminates as inorganic acidic catalysts in ring opening polymerization of cyclosiloxanes

Ring opening polymerization (ROP) of hexamethylcyclotrisiloxane (D₃) and octamethylcyclotetrasiloxane (D₄) was promoted by acid‐treated synthetic and natural silica‐aluminates. Silica‐alumina (1:3 Si/Al molar ratio) was obtained using a simple and economic route from precipitation of aluminum sulfate solutions. The material was treated in an acidic medium to improve the content of acid sites and successfully tested as inorganic acidic catalyst for ROP of D₃ or D₄ cyclosiloxanes. Natural bentonite was treated and used in a similar manner. Once the ROP reaction completed, the catalyst was easily removed and it was found that the recovered synthetic silica‐alumina was active in a second ROP reaction. The effect of the concentration and type of catalyst in respect to the molecular weight and polydispersity of polydimethylsiloxanes was analyzed: increasing the amount of silica‐alumina in ROP of D₄ from 0.05 to 0.1 g decreased the average molecular weight (M_n = 13–1.8 kDa) associated with an increase in the polydispersity (2.95 vs. 1.81). Analogous results were found with bentonite. These values suggest that an increase in the catalyst concentration led to a lower M_n, with a more homogeneous molecular chain dimension. Copyright © 2012 John Wiley & Sons, Ltd.     

Poly(amic acid) salt‐mediated palladium and platinum nanoparticles as highly active and recyclable catalysts for hydrogenation of nitroarenes in water under ambient conditions

Development of highly active and recyclable catalysts for selective hydrogenation of nitroarenes to amines in water at room temperature is always a challenge in chemical industry. This study reports a facile in situ method for synthesis of ultrafine palladium and platinum nanoparticles (NPs) stabilized by poly (amic acid) salt (PAAS) and their potential as catalysts for hydrogenation of nitroarenes with sodium borohydride or molecular hydrogen as reductant in water at room temperature. In the reduction of 4‐nitrophenol to 4‐aminophenol by sodium borohydride, the activity parameters of PdNPs–PAAS and PtNPs–PAAS catalyst is 6.66 × 10³ and 5.58 × 10³ s^?1 M^?1 respectively. In the hydrogenation of diverse nitroarenes under atmospheric hydrogen pressure, PdNPs–PAAS shows high activity but poor selectivity toward desired amines in some cases, while PtNPs–PAAS shows both high activity and high selectivity for selective hydrogenation of nitroarenes to corresponding anilines. The high efficiency of nanocatalyst is due to the quasi‐homogeneous dispersion of metal NPs and synergistic effects between metal NPs and PAAS. In addition, nanocatalyst can be easily recovered with pH‐sensibility of PAAS and reused at least six times without significant loss of catalytic activities.     

Active and recyclable ordered mesoporous magnetic organometallic catalyst as high‐performance visible light photocatalyst for degradation of organic pollutants

A novel light‐active magnetic Pd complex as a photocatalyst was prepared through bonding organometallics to mesoporous silica channels formed on the surface of silica‐coated iron oxide nanoparticles. The nanocomposite (denoted as Fe₃O₄@SiO₂@m‐SiO₂@PDA‐Pd(0); PDA = 1,10‐phenanthroline‐2,9‐dicarbaldehyde) is more efficient and has higher photocatalytic capability in the degradation of 2,4‐dichlorophenol under visible light irradiation compared with virgin Pd complex (PDA‐Pd). This noteworthy photodegradation activity can be due to the high dispersion of Pd nanoparticles. High yield, low reaction time and non‐toxicity of the catalyst are the main merits of this protocol. Also magnetic separation is an environmentally friendly alternative method for the separation and recovery of the catalyst, since it minimizes the use of solvents and auxiliary materials, reduces operation time and minimizes catalyst loss by preventing mass loss and oxidation. The produced Pd catalyst was characterised using various techniques. Furthermore, transmission electron microscopy characterization was used for determining the structural properties of the Pd nanocatalyst.