Exploring Excited‐State Tunability in Luminescent Tris‐cyclometalated Platinum(IV) Complexes: Synthesis of Heteroleptic Derivatives and Computational Calculations

The synthesis, structure, electrochemistry, and photophysical properties of a series of heteroleptic tris‐ cyclometalated Pt^IV complexes are reported. The complexes mer‐[Pt(C^N)₂(C′^N′)]OTf, with C^N=C‐deprotonated 2‐(2,4‐difluorophenyl)pyridine (dfppy) or 2‐phenylpyridine (ppy), and C′^N′=C‐deprotonated 2‐(2‐thienyl)pyridine (thpy) or 1‐phenylisoquinoline (piq), were obtained by reacting bis‐ cyclometalated precursors [Pt(C^N)₂Cl₂] with AgOTf (2 equiv) and an excess of the N′^C′H pro‐ligand. The complex mer‐[Pt(dfppy)₂(ppy)]OTf was obtained analogously and photoisomerized to its fac counterpart. The new complexes display long‐lived luminescence at room temperature in the blue to orange color range. The emitting states involve electronic transitions almost exclusively localized on the ligand with the lowest π–π* energy gap and have very little metal character. DFT and time‐dependent DFT (TD‐DFT) calculations on mer‐[Pt(ppy)₂(C′^N′)]⁺ (C′^N′=thpy, piq) and mer/fac‐[Pt(ppy)₃]⁺ support this assignment and provide a basis for the understanding of the luminescence of tris‐cyclometalated Pt^IV complexes. Excited states of LMCT character may become thermally accessible from the emitting state in the mer isomers containing dfppy or ppy as chromophoric ligands, leading to strong nonradiative deactivation. This effect does not operate in the fac isomers or the mer complexes containing thpy or piq, for which nonradiative deactivation originates mainly from vibrational coupling to the ground state.     

Rational Design of Mono- and Bi-Nuclear Cyclometalated Ir(III) Complexes Containing Di-Pyridylamine Motifs: Synthesis,Structure, and Luminescent Properties

Heteroleptic cyclometalated iridium (III) complexes (1–3) containing di-pyridylamine motifs were prepared in a stepwise fashion. The presence of the di-pyridylamine ligands tunes their electronic and optical properties, generating blue phosphorescent emitters at room temperature. Herein we describe the synthesis of the mononuclear iridium complexes [Ir(ppy)₂(DPA)][OTf] (1), (ppy = phenylpyridine; DPA = Dipyridylamine) and [Ir(ppy)₂(DPA-PhI)][OTf] (2), (DPA-PhI = Dipyridylamino-phenyliodide). Moreover, the dinuclear iridium complex [Ir(ppy)₂(L)Ir(ppy)₂][OTf]₂ (3) containing a rigid angular ligand “L = 3,5-bis[4-(2,2′-dipyridylamino)phenylacetylenyl]toluene” and displaying two di-pyridylamino groups was also prepared. For comparison purposes, the related dinuclear rhodium complex [Rh (ppy)₂(L)Rh(ppy)₂][OTf]₂ (4) was also synthesized. The x-ray molecular structure of complex 2 was reported and confirmed the formation of the target molecule. The rhodium complex 4 was found to be emissive only at low temperature; in contrast, all iridium complexes 1–3 were found to be phosphorescent in solution at 77 K and room temperature, displaying blue emissions in the range of 478–481 nm.     

Synthesis of Cyclometalated Platinum(II) Complex with an Alkynyl-Substituted Isocyanide Ligand,Its Structure and Photophysical Properties

The cyclometalated complex of platinum(II) [Pt(ppy)Cl(CNC6H4CCPh)] with phenylpyridine and [4-(2-phenylethynyl)phenyl]isocyanide ligands has been synthesized from the [Pt(ppy)Cl]2 dimer and CNC6H4CCPh isocyanide with 90% yield. The compound structure has been characterized using mass spectrometry, IR and NMR spectroscopy methods as well as single-crystal X-ray diffraction. The photophysical properties of the complex in a solid phase have been studied.     

Cyclometalated iridium(III) complex of 6‐hydroxydipyrido[3,2‐a:2′,3′‐c]phenazine: synthesis,and acid–base and avid DNA binding properties

A new cyclometalated Ir(III) complex [Ir(ppy)₂(hdppz)]PF₆ (Hppy = 2‐phenylpyridine and hdppz = 6‐hydroxydipyrido[3,2‐a:2′,3′‐c]phenazine) was synthesized and characterized. The pH effects on the UV–vis absorption spectra were studied and ground‐state acid ionization constant pK_a values of the complex were derived. The calf thymus DNA (ct‐DNA) binding properties of the complex were investigated with UV‐vis absorption spectrophotometric titrations, DNA competitive binding with ethidium bromide, DNA melting experiments, viscosity measurements and density functional theory (DFT) calculations. The complex was demonstrated to act as a ct‐DNA intercalator with a large DNA binding constant value of (6.06 ± 0.32) × 10⁶ M ⁻¹ in 50 mM NaCl. The avid DNA binding affinity observed was rationalized by the DFT calculations. Copyright © 2011 John Wiley & Sons, Ltd.     

A Redox‐Active Dinuclear Platinum Complex Exhibiting Multicolored Electrochromism and Luminescence

A redox series of cyclometalated platinum complexes based on a dinuclear motif linked by acetamidato (aam) bridging ligands, [Pt₂(μ‐aam)₂(ppy)₂] (ppy^?=2‐phenylpyridinate ion), has been synthesized. The complexes in this series are easily oxidized and reduced by both electrochemical and chemical methods, and this is accompanied by multistep changes in their optical properties, that is, multiple color changes and luminescence. Isolation of the complexes and the structural determination of three oxidation states, +2, +2.33, and +3, have been achieved. The mixed‐valent complex, with an average oxidation state of +2.33, forms a trimer based on the dinuclear motif. The mixed‐valent complex has a characteristic color owing to intervalence transitions in the platinum chain. In contrast, the divalent complex exhibits strong red phosphorescence originating from a triplet metal‐metal‐to‐ligand charge transfer (³MMLCT) state. This study demonstrates the unique chromic behavior of a redox‐active and luminescent platinum complex.     

Monocyclometalated Gold(III) Monoaryl Complexes—A New Class of Triplet Phosphors with Highly Tunable and Efficient Emission Properties

Highly tunable and rich phosphorescent emission properties based on the stable monocyclometalated gold(III) monoaryl structural motif are reported. Monochloro complexes of the type cis‐[(N^C)Au(C₆H₂(CF₃)₃)(Cl)] N^C=2‐phenylpyridine (ppy)] ( 1 ), [N^C=benzo[h]quinoline (bzq)] ( 2 ), [N^C=2‐(5‐Methyl‐2‐thienyl)pyridine (5m‐thpy)] ( 3 ) were successfully prepared in modest to good yields by reacting an excess of 2, 4, 6‐tris(trifluoromethyl)phenyl lithium (LiFmes) with the corresponding dichloride complexes cis‐[(N^C)AuCl₂]. Subsequent replacement of the chloride ligand in 1 with strong ligand field strength such as cyanide and terminal alkynes resulted in complexes of the type cis‐[(ppy)Au(Fmes)(R)] R=CN ( 4 ), I ( 5 ), C?C?C₆H₅ ( 6 ) and C?C?C₆H₄N(C₆H₅)‐p ( 7 ). Single crystal X‐ray diffraction studies of all the complexes except 7 were performed to further corroborate their chemical identity. Thermogravimetric analysis (TGA) studies of the uncommon cis configured aryl alkyne complex 7 confirmed the high stability of this complex. Detailed photophysical investigations carried out in solution at room temperature, at 77 K (2‐MeTHF) in rigidified media, solid state and 5 wt % PMMA revealed the phosphorescent nature of emission in these complexes. Additionally, their behavior was found to be governed based on both the nature of the cyclometalated ligand and the electronic properties of the ancillary ligands. Highly efficient interligand charge transfer in complex 7 provides access to a wide range of emission colors (solvent‐dependent) from deep blue to red with phosphorescence emission quantum yield of 30 % (441 nm) and 39 % (622 nm) in solution and solid state, respectively, and is the highest reported for any Au^III complexes. DFT and TDDFT calculations carried out further validated the observations and assignments based on the photophysical experimental findings.     

Cyclometalated IrIII Complexes with Substituted 1,10‐Phenanthrolines: A New Class of Efficient Cationic Organometallic Second‐Order NLO Chromophores

Cyclometalated cationic Ir^III complexes with substituted 1,10‐phenanthrolines (1,10‐phen), such as [Ir(ppy)₂(5‐R‐1,10‐phen)]Y (ppy=cyclometalated 2‐phenylpyridine; R=NO₂, H, Me, NMe₂; Y^?=PF₆^?, C₁₂H₂₅SO₃^?, I^?) and [Ir(ppy)₂(4‐R,7‐R‐1,10‐phen)]Y (R=Me, Ph) are characterized by a significant second‐order optical non linearity (measured by the electrical field induced second harmonic generation (EFISH) technique). This nonlinearity is controlled by MLCT processes from the cyclometalated Ir^III, acting as a donor push system, to π* orbitals of the phenanthroline, acting as an acceptor pull system. Substitution of cyclometalated 2‐phenylpyridine by the more π delocalized 2‐phenylquinoline (pq) or benzo[h]quinoline (bzq) or by the sulfur‐containing 4,5‐diphenyl‐2‐methyl‐thiazole (dpmf) does not significantly affect the μβ absolute value, which instead is affected by the nature of the R substituents on the phenanthroline, the higher value being associated with the electron‐withdrawing NO₂ group. By using a combined experimental (the EFISH technique and ¹H and ¹⁹F PGSE NMR spectroscopy) and theoretical (DFT, time‐dependent‐DFT (TDDFT), sum over states (SOS) approach) investigation, evidence is obtained that ion pairing, which is controlled by the nature of the counterion and by the concentration, may significantly affect the μβ values of these cationic NLO chromophores. In CH₂Cl₂, concentration‐dependent high absolute values of μβ are obtained for [Ir(ppy)₂(5‐NO₂‐1,10‐phen)]Y if Y is a weakly interacting anion, such as PF₆^?, whereas with a counterion, such as C₁₂H₂₅SO₃^? or I^?, which form tight ion‐pairs, the absolute value of μβ is lower and quite independent of the concentration. This μβ trend is partially due to the perturbation of the counterion on the LUMO π* levels of the phenanthroline. The correlation between the μβ value and dilution shows that the effect of concentration is a factor that must be taken into careful consideration.     

Robust Tris‐Cyclometalated Iridium(III) Phosphors with Ligands for Effective Charge Carrier Injection/Transport: Synthesis,Redox, Photophysical,and Electrophosphorescent Behavior

With the target to design and develop new functionalized green triplet light emitters that possess distinctive electronic properties for robust and highly efficient phosphorescent organic light‐emitting diodes (PHOLEDs), a series of bluish–green to yellow–green phosphorescent tris‐cyclometalated homoleptic iridium(III) complexes [Ir(ppy‐X)₃] (X=SiPh₃, GePh₃, NPh₂, POPh₂, OPh, SPh, SO₂Ph, Hppy=2‐phenylpyridine) have been synthesized and fully characterized by spectroscopic, redox, and photophysical methods. By chemically manipulating the lowest triplet‐state character of Ir(ppy)₃ with some functional main‐group 14–16 moieties on the phenyl ring of ppy, a new family of metallophosphors with high‐emission quantum yields, short triplet‐state lifetimes, and good hole‐injection/hole‐transporting or electron‐injection/electron‐transporting properties can be obtained. Remarkably, all of these Ir^III complexes show outstanding electrophosphorescent performance in multilayer doped devices that surpass that of the state‐of‐the‐art green‐emitting dopant Ir(ppy)₃. The devices described herein can reach the maximum external quantum efficiency (η_ext) of 12.3 %, luminance efficiency (η_L) of 50.8 cd A^?1, power efficiency (η_p) of 36.9 Lm W^?1 for [Ir(ppy‐SiPh₃)₃], 13.9 %, 60.8 cd A^?1, 49.1 Lm W^?1 for [Ir(ppy‐NPh₂)₃], and 10.1 %, 37.6 cd A^?1, 26.1 Lm W^?1 for [Ir(ppy‐SO₂Ph)₃]. These results provide a completely new and effective strategy for carrier injection into the electrophosphor to afford high‐performance PHOLEDs suitable for various display applications.     

Charge‐Neutral Amidinate‐Containing Iridium Complexes Capable of Efficient Photocatalytic Water Reduction

Two new charge‐neutral iridium complexes, [Ir(tfm‐ppy)₂(N,N′‐diisopropyl‐benzamidinate)] ( 1 ) and [Ir(tfm‐ppy)₂(N,N′‐diisopropyl‐4‐diethylamino‐3,5‐dimethyl‐benzamidinate)] ( 2 ) (tfm‐ppy=4‐trifluoromethyl‐2‐phenylpyridine) containing an amidinate ligand and two phenylpyridine ligands were designed and characterised. The photophysical properties, electrochemical behaviours and emission quenching properties of these species were investigated. In concert with the cobalt catalyst [Co(bpy)₃]²⁺, members of this new class of iridium complexes enable the photocatalytic generation of hydrogen from mixed aqueous solutions via an oxidative quenching pathway and display long‐term photostability under constant illumination over 72 h; one of these species achieved a relatively high turnover number of 1880 during this time period. In the case of complex 1 , the three‐component homogeneous photocatalytic system proved to be more efficient than a related system containing a charged complex, [Ir(tfm‐ppy)₂(dtb‐bpy)]⁺ ( 3 , dtb‐bpy=4,4′‐di‐tert‐butyl‐2,2′‐dipyridyl). In combination with a rhodium complex as a water reduction catalyst, the performances of the systems using both complexes were also evaluated, and these systems exhibited a more efficient catalytic propensity for water splitting than did the cobalt‐based systems that have been studied previously.     

IrIII and RuII Complexes Containing Triazole‐Pyridine Ligands: Luminescence Enhancement upon Substitution with β‐Cyclodextrin

Novel 2‐(1‐substituted‐1H‐1,2,3‐triazol‐4‐yl)pyridine (pytl) ligands have been prepared by “click chemistry” and used in the preparation of heteroleptic complexes of Ru and Ir with bipyridine (bpy) and phenylpyridine (ppy) ligands, respectively, resulting in [Ru(bpy)₂(pytl‐R)]Cl₂ and [Ir(ppy)₂(pytl‐R)]Cl (R=methyl, adamantane (ada), β‐cyclodextrin (βCD)). The two diastereoisomers of the Ir complex with the appended β‐cyclodextrin, [Ir(ppy)₂(pytl‐βCD)]Cl, were separated. The [Ru(bpy)₂(pytl‐R)]Cl₂ (R=Me, ada or βCD) complexes have lower lifetimes and quantum yields than other polypyridine complexes. In contrast, the cyclometalated Ir complexes display rather long lifetimes and very high emission quantum yields. The emission quantum yield and lifetime (Φ=0.23, τ=1000 ns) of [Ir(ppy)₂(pytl‐ada)]Cl are surprisingly enhanced in [Ir(ppy)₂(pytl‐βCD)]Cl (Φ=0.54, τ=2800 ns). This behavior is unprecedented for a metal complex and is most likely due to its increased rigidity and protection from water molecules as well as from dioxygen quenching, because of the hydrophobic cavity of the βCD covalently attached to pytl. The emissive excited state is localized on these cyclometalating ligands, as underlined by the shift to the blue (450 nm) upon substitution with two electron‐withdrawing fluorine substituents on the phenyl unit. The significant differences between the quantum yields of the two separate diastereoisomers of [Ir(ppy)₂(pytl‐βCD)]Cl (0.49 vs. 0.70) are attributed to different interactions of the chiral cyclodextrin substituent with the Δ and Λ isomers of the metal complex.     

Electrochemiluminescence Studies of Phosphorescent Dopant and Host Molecules of Polymer Light-emitting Diodes

Electrochemiluminescence (ECL) from tris(2‐phenylpyridine)irdium [Ir(ppy)₃] was investigated following cross reaction of its anion with oxidized poly(N‐vinyl‐carbazole) (PVK) and its cation with reduced 2‐(4‐biphenylyl)‐5‐(4‐tert‐butyl‐phenyl)‐1,3,4‐oxadiazole (PBD). Both cross reactions show Ir(ppy)₃ emission and the cross reaction of PVK^+·/Ir(ppy)⁻₃ showed the highest ECL intensity. The comparisons of the reaction enthalpy and the energy of Ir(ppy)₃ light emitting shows that reaction between PVK^+· and Ir(ppy)⁻₃ is energy sufficient to populate metal‐to‐ligand charge transfer (MLCT) excited singlet (3.04 eV) of Ir(ppy)₃, while the reaction between Ir(ppy)⁺₃ and PBD^{− ·} is energy efficient to populate MLCT excited triplet (2.4 eV). The ECL result in solution reveals that the energy released from charge transfer between the Ir(ppy)₃ and PVK or PBD is sufficient to produce the excited state of Ir(ppy)₃ in solid polymer light‐emitting diodes (PLEDs) based on PVK:PBD hosts doped by Ir(ppy)₃. These results obtained will provide further insight into charge‐transfer excitation in PLEDs.     

One-pot synthesis of strong solid state emitting mono-cyclometalated iridium(III) complexes: study of their aggregation induced enhanced phosphorescence

Strong solid-state greenish-blue emitting, mono-cyclometalated iridium complexes, [Ir(ppy)(PPh(3))(2)(H)(Cl)], 2a and [Ir(F(2)ppy)(PPh(3))(2)(H)(Cl)], 2b [ppyH = 2-phenylpyridine; F(2)ppyH = 2-(2',4'-difluoro)phenylpyridine], have been synthesized by a convenient route. The 'aggregation induced enhanced phosphorescence (AIEP)' activity exhibited by these complexes has been rationalized.     

Synthesis,Characterization, and Properties of a Carbonate‐Bridged Dinuclear Rhodium(III) Complex via Fixation of Atmospheric CO2

A carbonate‐bridged rhodium(III) dimeric complex of formula μ‐CO₃‐[(ppy)₂Rh]₂, (ppy = 2‐phenylpyridine) was synthesized and characterized by IR and ¹H NMR spectroscopy as well as X‐ray diffraction. The bridging carbonate ion presumably originates from the capture of CO₂ in air deduced on a series of control experiments, which may have valuable implications for the study of fixation of CO₂. The luminescent and thermal properties of this complex were also investigated.     

Photophysical Properties of Heteroleptic Iridium Complexes Containing Carbazole‐Functionalized β‐Diketonates

Twelve iridium complexes with general formula of Ir(C^N)₂(LX) [C^N represents the cyclometalated ligand, i.e. 2‐(2,4‐difluorophenyl) pyridine (dfppy), 2‐phenylpyridine (ppy), dibenzo{f, h}quinoxaline (DBQ); LX stands for β‐diketonate, i.e. acetyl acetonate (acac), 1‐(carbazol‐9‐yl)‐5,5‐dimethylhexane‐2,4‐diketonate (CBDK), 1‐(carbazol‐9‐yl)‐5,5,6,6,7,7,7‐heptafluoroheptane‐2,4‐diketonate (CHFDK), 1‐(N‐ethyl‐carbazol‐3‐yl)‐4,4,5,5,6,6,6‐heptafluorohexane‐1,3‐diketonate (ECHFDK)] are synthesized, characterized and their photophysical properties are systemically studied. In addition, crystals of Ir(DBQ)₂(CHFDK) and Ir(DBQ)₂(acac) are obtained and characterized by single crystal X‐ray diffraction. The choice of these iridium complexes provides an opportunity for tracing the effect of the triplet energy level of ancillary ligands on the photophysical and electrochemical behaviors. Data show that if the triplet energy level of the β‐diketonate is higher than that of the Ir(C^N)₂ fragment and there is no superposition on the state density map, strong ³LC or ³MLCT‐based phosphorescence can be obtained. Alternatively, if the state density map of the two parts are in superposition, the ³LC or ³MLCT‐based transition will be quenched at room temperature. Density functional theory calculations show that these complexes can be divided into two categories. The lowest excited state is mainly determined by C^N but not β‐diketonate when the difference between the triplet energy levels of the two parts is large. However, when this difference is very small, the lowest excited state will be determined by both sides. This provides a satisfactory explanation for the experimental observations.     

1H, 13C, 15N and 195Pt NMR studies of Au(III) and Pt(II) chloride organometallics with 2‐phenylpyridine

¹H, ¹³C, ¹⁵N and ¹⁹⁵Pt NMR studies of gold(III) and platinum(II) chloride organometallics with N(1),C(2′)‐chelated, deprotonated 2‐phenylpyridine (2ppy*) of the formulae [Au(2ppy*)Cl₂], trans(N,N)‐[Pt(2ppy*)(2ppy)Cl] and trans(S,N)‐[Pt(2ppy*)(DMSO‐d₆)Cl] (formed in situ upon dissolving [Pt(2ppy*)(µ‐Cl)]₂ in DMSO‐d₆) were performed. All signals were unambiguously assigned by HMBC/HSQC methods and the respective ¹H, ¹³C and ¹⁵N coordination shifts (i.e. differences between chemical shifts of the same atom in the complex and ligand molecules: Δ^1H_coord = δ^1H_complex ? δ^1H_ligand, Δ^13C_coord = δ^13C_complex ? δ^13C_ligand, Δ^15N_coord = δ^15N_complex ? δ^15N_ligand), as well as ¹⁹⁵Pt chemical shifts and ¹H‐¹⁹⁵Pt coupling constants discussed in relation to the known molecular structures. Characteristic deshielding of nitrogen‐adjacent H(6) protons and metallated C(2′) atoms as well as significant shielding of coordinated N(1) nitrogens is discussed in respect to a large set of literature NMR data available for related cyclometallated compounds. Copyright © 2009 John Wiley & Sons, Ltd.     

Red‐ and Green‐Emitting Iridium(III) Complexes for a Dual Barometric and Temperature‐Sensitive Paint

A new dual luminescent sensitive paint for barometric pressure and temperature (T) is presented. The green‐emitting iridium(III) complex [Ir(ppy)₂(carbac)] (ppy=2‐phenylpyridine; carbac=1‐(9H‐carbazol‐9‐yl)‐5,5‐dimethylhexane‐2,4‐dione) was applied as a novel probe for T along with the red‐emitting complex [Ir(btpy)₃], (btpy=2‐(benzo[b]thiophene‐2‐yl)pyridine) which functions as a barometric (in fact oxygen‐sensitive) probe. Both iridium complexes were dissolved in different polymer materials to achieve optimal responses. The probe [Ir(ppy)₂(carbac)] was dispersed in gas‐blocking poly(acrylonitrile) microparticles in order to suppress any quenching of its luminescence by oxygen. The barometric probe [Ir(btpy)₃], in turn, was incorporated in a cellulose acetate butyrate film which exhibits good permeability for oxygen. The effects of temperature on the response of the oxygen probe can be corrected by simultaneous optical determination of T, as the poly(acrylonitrile) microparticles containing the temperature indicator are incorporated into the film. The phosphorescent signals of the probes for T and barometric pressure, respectively, can be separated by optical filters due to the ≈75 nm difference in their emission maxima. The dual sensor is applicable to luminescence lifetime imaging of T and barometric pressure. It is the first luminescent dual sensor material for barometric pressure/T based exclusively on the use of Ir^III complexes in combination with luminescence lifetime imaging.     

Tuning the Excited—state Properties of Cyclometalated Platinum（Ⅱ）Complexes of 6—Pheny1—2,2’bipyridine by Ancillary Acetylide Ligand

A series of luminescent cyclometalated platinum(Ⅱ）complexes,(C^N^N)Pt(C≡CR)[HC^N^N=4-(4-tolyl)-6-phenyl-2,2’-bipyridine;R=4-chlorophenyl(1),phenyl(2) and 4-tolyl(3)],were synthesized,and their spectroscopic properties have been examined.These complexes are brightly emissive both in fluid solution and in the solid state,attributed to triplet metal-to-ligand charge transfer(^3MLCT)state.The excited state energy can be tuned by ancillary acetylide ligands.The emission lifetimes in dichloromethand solution at room temperature were up to 1.64 μs and the emission quantum yields were in the range of 0.03-0.15.     

Cyclometalation of Phenylpyridines by Rhodium(I) via Room‐temperature C–H Bond Activation

A convenient synthesis of cyclometalated complexes [{Rh(μ‐Cl)(C N)₂}₂] [C N = ppy, 2‐phenylpyridinato ( 2 ); C N = ptpy, 2‐(p‐tolyl)pyridinato ( 3 ); 4‐Clppy = 4‐chloro‐2‐phenylpyridinato ( 4 )] at room temperature is described. The compounds were obtained by the oxidative addition reaction of the corresponding 2‐phenylpyridines to [{Rh(μ‐Cl)(coe)₂}₂] ( 1 ) (coe = cis‐cyclooctene) in dichloromethane solution. The rate of the reaction seems to depend on the electronic influence of the substituents on the phenyl rings of the corresponding 2‐phenylpyridines. The analogous iridium complex of 1 reacted markedly only at higher temperatures in suitable solvents under cyclometalation. The molecular structure of the new compound 4 was additionally confirmed by an X‐ray diffraction study.     

Decreased Turn‐On Times of Single‐Component Light‐Emitting Electrochemical Cells by Tethering an Ionic Iridium Complex with Imidazolium Moieties

We report a significant decrease in turn‐on times of light‐emitting electrochemical cells (LECs) by tethering imidazolium moieties onto a cationic Ir complex. The introduction of two imidazolium groups at the ends of the two alkyl side chains of [Ir(ppy)₂(dC6‐daf)]⁺(PF₆)^? (ppy=2‐phenylpyridine, dC6‐daf=9,9′‐dihexyl‐4,5‐diazafluorene) gave the complex [Ir(ppy)₂(dC6MIM‐daf)]³⁺[(PF₆)^?]₃ (dC6MIM‐daf=9,9‐bis[6‐(3‐methylimidazolium)hexyl]‐1‐yl‐4,5‐diazafluorene). Both complexes exhibited similar photoluminescent/electrochemical properties and comparable electroluminescent efficiencies. The turn‐on times of the LECs based on the latter complex, however, were much lower than those of devices based on the former. The improvement is ascribed to increased concentrations of mobile counterions ((PF₆)^?) in the neat films and a consequent increase in neat‐film ionic conductivity. These results demonstrate that the technique is useful for molecular modifications of ionic transition‐metal complexes (ITMCs) to improve the turn‐on times of LECs and to realize single‐component ITMC LECs compatible with simple driving schemes.     

Synthesis, structures and spectroscopic properties of platinum complexes containing orthometalated 2-phenylpyridine

The synthesis, structure and spectroscopy of a series of luminescent orthometalated square planar platinum(II) complexes are reported. Reaction of K₂PtCl₄ with one mole equivalent of 2-phenylpyridine (ppyH) in 2-ethoxyethanol and water (1:1 ratio) resulted in the formation of chloro-bridged dimeric precursor [Pt₂(μ-Cl)₂(ppy)₂], which on further reactions with various anionic one-, two- and three-atom ancillary ligands, having O/N/S donors, yielded mono- and bi-nuclear platinum(II) complexes. Platinum(III) complexes of composition [Pt₂Cl₂(μ-Epy)₂(ppy)₂] have been isolated with pyE⁻ (E = O or S) ligands. These complexes have been characterized by elemental analysis, NMR (¹H, ³¹P, ¹⁹⁵Pt) and absorption spectroscopy. The complexes [Pt₂(μ-N^∩N)₂(ppy)₂] (N^∩N = pyrazole and 3,5-dimethylpyrazole); [Pt(S^∩S)(ppy)] (S^∩S = ethylxanthate and diisopropyldithiophosphate); [Pt₂Cl₂(μ-Epy)₂(ppy)₂] (Epy = 2-pyridinol {Opy} and 2-mercaptopyridine {Spy}) and [PtCl(ppy)(PhNC(Me)NHPh)] have been structurally characterized by X-ray crystallography.