Highly Effective Proton-Conduction Matrix-Mixed Membrane Derived from an -SO3H Functionalized Polyamide

Developing a low-cost and effective proton-conductive electrolyte to meet the requirements of the large-scale manufacturing of proton exchange membrane (PEM) fuel cells is of great significance in progressing towards the upcoming “hydrogen economy” society. Herein, utilizing the one-pot acylation polymeric combination of acyl chloride and amine precursors, a polyamide with in-built -SO₃H moieties (PA-PhSO₃H) was facilely synthesized. Characterization shows that it possesses a porous feature and a high stability at the practical operating conditions of PEM fuel cells. Investigations of electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA-PhSO₃H displays a proton conductivity of up to 8.85 × 10⁻² S·cm⁻¹ at 353 K under 98% relative humidity (RH), which is more than two orders of magnitude higher than that of its -SO₃H-free analogue, PA-Ph (6.30 × 10⁻⁴ S·cm⁻¹), under the same conditions. Therefore, matrix-mixed membranes were fabricated by mixing with polyacrylonitrile (PAN) in different ratios, and the EIS analyses revealed that its proton conductivity can reach up to 4.90 × 10⁻² S·cm⁻¹ at 353 K and a 98% relative humidity (RH) when the weight ratio of PA-PhSO₃H:PAN is 3:1 (labeled as PA-PhSO₃H-PAN (3:1)), the value of which is even comparable with those of commercial-available electrolytes being used in PEM fuel cells. Additionally, continuous tests showed that PA-PhSO₃H-PAN (3:1) possesses a long-life reusability. This work demonstrates, using the simple acylation reaction with the sulfonated module as precursor, that low-cost and highly effective proton-conductive electrolytes for PEM fuel cells can be facilely achieved.     

Functionality and structure of polymers. I. Photoreaction and fluorescence of polyesters having pendant anthryl groups

Various polyesters having pendant (9-anthryl)methyl groups were prepared from 2-(9-anthryl)methylpropane-1,3-diol and the esters or chlorides of dicarboxylic acids. These polyesters are poly[2-(9-anthryl)-methylpropane-1,3-diyl-oxy-(9-anthryl)methylmalonyl-oxy](PA-1A), poly-[2-9-anthrylmethylpropane-1,3-diyl-oxysuccinyloxy](PA-2), poly-[2-9-anthrylmethylpropane-1,3-diyl-oxyadipyloxy](PA-4), poly[2-(9-anthryl)methylpropane-1,3-diyl-oxysebacyloxy] (PA-8), poly[2-(9-anthryl)methylpropane-1,3-diyl-oxy-(1-naphthyl)methylmalonyloxy](PA-1N), and poly[2-(9-anthryl)methylpropane-1,3-diyl-oxyterephthaloyloxy](PA-Ph). Although the absorption spectrum of the anthryl group is not influenced by the change in the environment in which the anthryl group is located, the fluorescence spectra show characteristic change reflecting the environment around the chromophore. Dimer, aggregates, or excimer fluorescence of anthryl groups and energy transfer from naphthyl to anthryl groups for PA-1N were discussed. The rates of photodimerization of anthryl groups determined spectroscopically in dilute solutions for these polyesters and their monomer model compound(1,3-diacetoxy-2(9-anthryl)methylpropane) (MA), were in the following order; PA-8 > PA-4 > PA-1A > PA-2 > PA-Ph > MA. The effects of polymer structure on the photoreaction were discussed on the basis of information on molecular interactions obtained by fluorescence spectroscopy. The fraction of intramolecular cyclization was estimated from dependence of the rate of photoreaction on the concentration of the polyesters. When anthryl groups are linked by a long, flexible polymethylene chain (PA-8), intramolecular process predominates whereas intermolecular dimerization proceeds almost exclusively for a rodlike molecule(PA-Ph). These results are discussed from the viewpoint of the structure–functionality relationship in polymeric systems.     

Organoruthenaborane Chemistry. X. The SM2-catalysed formation of [ l-(η6-C6Me6)-isocloso-RuB9H9], and some B-phenylamino derivatives. NMR and X-ray diffraction studies

The action of SMe₂ on the ten-vertex nido-ruthenaborane [6-(η⁶-C₆Me₆)RuB₉H_l3] ( 1 ) provides a high-yield route to the unsubstituted isocloso-ruthenaborane [1-(η⁶-C₆Me₆)RuB₉H₉] (2). The benzene analogue [1-(η⁶-C₆Me₆)RuB₉H₉] is prepared similarly. By contrast, reaction of (1) with PhNH₂ gives a variety of B-phenylamino isocloso derivatives, including orange crystals of [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB 9 H₈] ( 3 ), red-orange [1-(η⁶-C₆Me₆)-2,3-(PhNH)₂-isocloso-1-RuB₉H₇] ( 4 ) and dark-red [1-(η⁶-C₆Me₆)-5,6,7-(PhNH)₃-isocloso-1-RuB₉H₆] ( 5 ). Detailed ¹H and ¹¹B nmr properties of these various compounds are described. The structure of ( 3 ) has been established by a single-crystal X-ray diffraction study of the solvate [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB₉H₈] · 1/2 CH₂Cl₂; the crystals were monoclinic, space group C2/c, with a = 1895.1(3), b = 1556.6(3), c = 1716.4(3) pm, β = 104.37(1)° and z = 8.     

Raman scattering study of calcium hexaboride

We report significant difference in the Raman spectra of two different kinds of CaB₆ single crystals grown from boron purity 99.9% (3N) or 99.9999% (6N), respectively. Our Raman spectra of CaB₆ (3N), which are similar to those of previous measurement [N. Ogita, S. Nagai, N. Okamoto, M. Udagawa, F. Iga, M. Sera, J. Akimitsu, S. Kunii, Phys. Rev. B 68 (2003) 224305], show peaks at 781.3 cm⁻¹ (T_2g), 1140.1 cm⁻¹ (E_g), and 1283.5 cm⁻¹ (A_1g). The E_g mode shows a characteristic double-peak feature due to an additional weak broad peak centered at 1156.0 cm⁻¹. However, the Raman spectra of CaB₆ (6N) show sharp peaks at 772.5 cm⁻¹ (T_2g), 1137.9 cm⁻¹ (E_g), and 1266.6 cm⁻¹ (A_1g). The peak frequencies are down shifted as much as 17 cm⁻¹. In addition, no additional peak feature is observed for the E_g mode so that the mode is symmetric in the case of CaB₆ (6N). The X-ray powder diffraction patterns for both CaB₆ (3N) and CaB₆ (6N) show that the lattice parameters are essentially the same. The majority of the impurity in the 99.9% (3N) boron is assessed to be C. Thus we prepared Ca(B_0.995C_0.005)₆, CaB₆ (6N) doped with C, and looked for the difference in the Raman spectra. The Raman spectra of Ca(B_0.995C_0.005)₆ are nearly identical to those of CaB₆ (6N), indicating that the difference in the Raman spectra of CaB₆ (3N) and CaB₆ (6N) is not due to C impurity. However, presence of impurity, even if small amount, seems to be enough to trigger local-structure changes to lower symmetry inducing the difference in Raman spectra of CaB₆ (3N) and CaB₆ (6N).     

Cs6[TeMo6O24] · 2 Te(OH)6 · 4 H2O ? eine Tellursäure-reiche Einschlußverbindung

Cs₆[TeMo₆O₂₄] · 2 Te(OH)₆ · 4 H₂O – A Telluric Acid-rich Inclusion Compound Single crystals of Cs₆[TeMo₆O₂₄] · 2 Te(OH)₆ · 4 H₂O have been grown from aqueous solution. It crystallizes triclinically in space group P1 with Z = 1, a = 1 086.6(1), b = 1 095.6(1), c = 1 105.5(1) pm, α = 118.83(1), β = 106.22(1) and γ = 100.00(1)°. X-ray structure determination (5 755 reflections, 251 parameters, R_g = 0.0355) revealed an infinite chain consisting of hydrogen bonded (OH …? O 259.4(5) – 267.4(6) pm) Te(OH)₆ molecules and [TeMo₆O₂₄]^6? anions to be the Prominent structural feature. Further hydrogen bonds between neighbouring Te(OH)₆ molecules connect these chains to yield a two-dimensionally infinite arrangement.     

Water-rich molybdotellurates: Preparation and crystal structure of Li6[TeMo6O24] · 18 H2O and Li6[TeMo6O24] · Te(OH)6 · 18 H2O

Li₆[TeMo₆O₂₄] · 18 H₂O is triclinic (space group P1 , a = 1 041.7(1), b = 1 058.6(1), c = 1 070.8(1) pm, α = 61.08(1), β = 60.44(1), γ = 73.95(1)°). Single crystal X-ray structure analysis (Z = 1, 295 K, 317 parameters, 3 973 reflections, R_g = 0.0250) revealed an infinite branched chain of edge-sharing Li coordination polyhedra to be the prominent structural feature. One of the four crystallographically independent Li⁺ is coordinated octahedrally. The coordination polyhedra of the remaining Li⁺ are distorted trigonal bipyramids. Only three unique oxygen atoms (O(9), O(10), O(12)) of the centrosymmetric [TeMo₆O₂₄]^6? anion are bound to Li⁺. The further positions in the coordination spheres of the Li⁺ are occupied by water molecules. Intermolecular hydrogen bonds involve mainly oxygen atoms of the [TeMo₆O₂₄]^6? anion as nearly equivalent proton acceptors without regard to their different bonding modes to Te and Mo, respectively. Li₆[TeMo₆O₂₄] · Te(OH)₆ · 18 H₂O crystallizes monoclinically in space group P2₁/n with Z = 4, a = 994.1(3), b = 2 344.8(10), c = 1 764.9(4) pm, and β = 91.36(4)°. Single crystal structure analysis with least squares refinement of 627 parameters (5 900 reflections, 295 K) converged to R_g = 0.0324. There are six unique Li⁺ cations. The coordination polyhedra of Li(1), Li(2), Li(3), and Li(4) are linked by common edges to yield an eight membered centrosymmetric strand. The coordination polyhedra of the remaining two Li⁺ sites (Li(5), Li(6)) are connected to a dimeric unit via a common corner. All oxygen atoms of the Te(OH)₆ molecule are involved in the coordination of Li⁺. However, only three oxygen atoms (O(13), O(18), O(23)) of the [TeMo₆O₂₄]^6? anion which lacks crystallographic symmetry are involved in the coordination of Li⁺. The oxygen atoms of the anion act as proton acceptors in hydrogen bonds of predominantly medium strength. Te(OH)₆ molecules and [TeMo₆O₂₄]^6? anions connected by strong hydrogen bonds form an infinite chain.     

A novel series of M(II) complexes of 6‐methylpyridine‐2‐carboxylic acid with 4(5)methylimidazole: Synthesis,crystal structures, α‐glucosidase activity,density functional theory calculations and molecular docking

Novel complexes of 6‐methylpyridine‐2‐carboxylic acid and 4(5)methylimidazole, namely [Mn(6‐mpa)₂(4(5)MeI)₂] ( 1 ), [Zn(6‐mpa)₂(4(5)MeI)₂] ( 2 ), [Cd(6‐mpa)₂(4(5)MeI)₂] ( 3 ), [Co(6‐mpa)₂(4(5)MeI)₂] ( 4 ), [Ni(6‐mpa)₂(4(5)MeI)(OAc)] ( 5 ) and [Cu(6‐mpa)₂(4(5)MeI)] ( 6 ), were synthesized for the first time. The structures of complexes 1 – 4 and complexes 5 and 6 were determined using X‐ray diffraction and mass spectrometric techniques, respectively. The experimental spectral analyses for these complexes were performed using Fourier transform infrared and UV–visible techniques. The α‐glucosidase inhibition activity values (IC₅₀) of complexes 1 – 6 were identified in view of genistein reference compound. Moreover, the DFT/HSEh1PBE/6‐311G(d,p)/LanL2DZ level was used to obtain optimal molecular geometry and vibrational wavenumbers for complexes 1 – 6 . Electronic spectral behaviours and major contributions to the electronic transitions were investigated using TD‐DFT/HSEh1PBE/6‐311G(d,p)/LanL2DZ level with conductor‐like polarizable continuum model and SWizard program. Finally, in order to investigate interactions between the synthesized complexes ( 1 – 6 ) and target protein (template structure S. cerevisiae isomaltase), a molecular docking study was carried out.     

Triazole‐Functionalized N‐Heterocyclic Carbene Complexes of Palladium and Platinum and Efficient Aqueous Suzuki–Miyaura Coupling Reaction

Imidazolium salts bearing triazole groups are synthesized via a copper catalyzed click reaction, and the silver, palladium, and platinum complexes of their N‐heterocyclic carbenes are studied. [Ag₄(L1)₄](PF₆)₄, [Pd(L1)Cl](PF₆), [Pt(L1)Cl](PF₆) (L1=3‐((1‐benzyl‐1H‐1,2,3‐triazol‐4‐yl)methyl)‐1‐(pyrimidin‐2‐yl)‐1H‐imidazolylidene), [Pd₂(L2)₂Cl₂](PF₆)₂, and [Pd(L2)₂](PF₆)₂ (L2=1‐butyl‐3‐((1‐(pyridin‐2‐yl)‐1H‐1,2,3‐triazol‐4‐yl)methyl)imidazolylidene) have been synthesized and fully characterized by NMR, elemental analysis, and X‐ray crystallography. The silver complex [Ag₄(L1)₄](PF₆)₄ consists of a Ag₄ zigzag chain. The complexes [Pd(L1)Cl](PF₆) and [Pt(L1)Cl](PF₆), containing a nonsymmetrical NCN ′ pincer ligand, are square planar with a chloride trans to the carbene donor. [Pd₂(L2)₂Cl₂](PF₆)₂ consists of two palladium centers with CN₂Cl coordination mode, whereas the palladium in [Pd(L2)₂](PF₆)₂ is surrounded by two carbene and two triazole groups with two uncoordinated pyridines. The palladium compounds are highly active for Suzuki–Miyaura cross coupling reactions of aryl bromides and 1,1‐dibromo‐1‐alkenes in neat water under an air atmosphere.     

Tungstotellurates of the imidazolium and 4-methylimidazolium cations

Tungstotellurates of the organic imidazolium and 4-methyl-imidazolium cations have been prepared and characterized by X-ray diffraction and i.r. spectroscopy. The [TeW₆O₂₄]^6– anion is formed by close packing of oxygen atoms with Te and W atoms in distorted octahedral voids. In both compounds the organic cations are involved in hydrogen bonds, to the [TeW₆O₂₄]^6– anion in [H₂imz]₆[TeW₆O₂₄] · 2(Himz) (1) and to Te(OH)₆ units in [4-H₂-methyl-imz]₆[TeW₆O₂₄] · Te(OH)₆ (2). Solution studies of (1) and (2) by ¹H-, ¹⁸³W- and ¹²⁵Te-n.m.r. have been carried out. Thermogravimetric (t.g.) and calorimetric (d.s.c.) analyses were performed for both compounds.     

Synthesis,Structure, and Reactivity of RuII Complexes with Trimethylsilylethinylamidinate Ligands

The mononuclear amidinate complexes [(η⁶‐cymene)‐RuCl( 1a )] ( 2 ) and [(η⁶‐C₆H₆)RuCl( 1b )] ( 3 ), with the trimethylsilyl‐ethinylamidinate ligands [Me₃SiC≡CC(N‐c‐C₆H₁₁)₂]^– ( 1a^– ) and[Me₃SiC≡CC(N‐i‐C₃H₇)₂]^– ( 1b^– ) were synthesized in high yields by salt metathesis. In addition, the related phosphane complexes[(η⁵‐C₅H₅)Ru(PPh₃)( 1b )] ( 4a ) [(η⁵‐C₅Me₅)Ru(PPh₃)( 1b )] ( 4b ), and [(η⁶‐C₆H₆)Ru(PPh₃)( 1b )](BF₄) ( 5 ‐BF₄) were prepared by ligand exchange reactions. Investigations on the removal of the trimethyl‐silyl group using [Bu₄N]F resulted in the isolation of [(η⁶‐C₆H₆)Ru(PPh₃){(N‐i‐C₃H₇)₂CC≡CH}](BF₄) ( 6 ‐BF₄) bearing a terminal alkynyl hydrogen atom, while 2 and 3 revealed to yield intricate reaction mixtures. Compounds 1a / b to 6 ‐BF₄ were characterized by multinuclear NMR (¹H, ¹³C, ³¹P) and IR spectroscopy and elemental analyses, including X‐ray diffraction analysis of 1b , 2 , and 3 .     

Anion-templated assembly of half-sandwich rhodium-based multinuclear metallamacrocycles

A series of half‐sandwich rhodium‐based metallamacrocycles with tetra‐ and hexanuclearities have been synthesized. They are assembled by linking the deprotonated 2,4‐diacetyl‐5‐hydroxy‐5‐methyl‐3‐(3‐pyridinyl)cyclohexanone (HL) ligand in the presence of counteranions. When the counteranion was the tetrahedral BF₄^? ion, tetranuclear metallamacrocycle [(Cp*RhL)₄][BF₄]₄ ( 1 d ) was formed. However, the larger OTf^?, PF₆^?, and SbF₆^? counterions favored the formation of hexanuclear metallamacrocycles [(Cp*RhL)₆?2OTf][OTf]₄ ( 1 a ), [(Cp*RhL)₆?2PF₆][PF₆]₄ ( 1 b ), and [(Cp*RhL)₆?2SbF₆][SbF₆]₄ ? 6CH₃CN ( 1 c ) when the reactions were performed under the same conditions. Single‐crystal X‐ray analysis indicated that, in the solid state, two counteranions were encapsulated in each belt‐like host molecule of hexanuclear metallamacrocycles 1 a , b , and c . Based on the results of ¹H NMR analysis in methanol, the nuclearities of 1 a – c and the two encapsulated anions in each molecular cavity were maintained in solution. In addition, tetranuclear metallamacrocycle 1 d was converted into the hexanuclear metallamacrocycles 1 a′ , b , and c after addition of the appropriate anion as its [NBu₄]⁺ salt. The compound 1 a′ was characterized by single‐crystal X‐ray diffraction to have the formula [(Cp*RhL)₆?2OTf][BF₄]₄ ? 2M eOH ? 2H₂O. From the interconversion of the hexanuclear metallamacrocycles, we have concluded that the hexanuclear belt‐like host in 1 a – c has an clear selectivity for larger anions, in the sequence SbF₆^?≈PF₆^?>OTf^?>BF₄^?>Cl^?.     

Alkali Cation Ligating Chains and Sheets of the Macrocycle 1, 7‐Dithia‐18‐Crown‐6 with Bridging Iodo‐ and Thiocyanatocuprate(I) Units

Treatment of an acetonitrile solution of CuI with 1, 7‐dithia‐18‐crown‐6 (1, 7‐DT18C6) at 100°C affords the coordination polymer ¹[(CuI)₂(1, 7‐DT18C6)₂] ( 1 ) in which 1, 7‐DT18C6 ligands bridge (CuI)₂ rings into double chains. 1D polymers of the type ¹[M{(Cu₃I₄)(1, 7‐DT18C6)}] (M = K, 2 ; M = Cs, 3 ) can be isolated under similar conditions in the presence of respectively KI and CsI. Both contain bridging heptacyclic [Cu₆I₈]^2— units but crystallise in different space groups, namely P1 and C2/m. The cesium cation of 3 is markedly displaced from the best plane through the thiacrown ether donor atoms. Reaction of 1, 7‐DT18C6 with CuSCN in the presence of NaSCN yields ²[{Na(CH₃CN)₂} {(CuSCN)₂(1, 7‐DT18C6)}][Cu(SCN)₂] ( 4 ), in which ¹[(CuSCN)₂] double chains are linked through macrocycles into sheets. Infinite ¹[{Cu(SCN)₂}^—] chains compensate the charge of the Na⁺ cations. Complex 1 can imbibe 0.90 mol CsNO₃ per mol of 1, 7‐DT18C6 pairs.     

Molecular Recognition Properties of Biphen[4]arene

Biphen[n]arenes (n=3, 4) are a new family of macrocyclic hosts. Here, we describe the molecular recognition behavior of hydroxylated biphen[4]arene (OHBP4) for the first time. A series of cationic guests with different sizes and shapes, including quaternary ammonium salts ( 1? PF₆ and 2? PF₆), pyridinium‐based guests ( 3? 2 PF₆– 6? 2 PF₆), and cobaltocenium hexafluorophosphate ( 7? PF₆), were chosen as model guest molecules. OHBP4 exhibits good selectivity towards the 2,7‐dibutyldiazapyrenium bis(hexafluorophosphate) ( 4? 2 PF₆) axle to form a [2]pseudorotaxane‐type complex. In contrast, hydroxylated biphen[3]arene (OHBP3) cannot bind with this big guest. In addition, OHBP4 strongly interacts with adamantane derivative 2? PF₆ and cobaltocenium 7? PF₆, which have tridimensional shape and relatively large size. The association constant of the 7 ⁺?OHBP4 complex in 1:1 (v/v) [D₆]acetone/CD₂Cl₂ solution is up to 3100±300 m ^?1.     

Synthese und Struktur von [(Ph3PAu)6Co(CO)2](PF6) und [(Ph3PAu)7Co(CO)2](PF6)2

Synthesis and Structure of [(Ph₃PAu)₆Co(CO)₂](PF₆) and [(Ph₃PAu)₇Co(CO)₂](PF₆)₂ By the reaction of (Ph₃PAu)₄Co[(CO)₃]⁺ with OH^? in the presence of excess Ph₃PAuCl the larger cluster cations [(Ph₃PAu)₆Co(CO)₂]⁺ ( 1 ) and [(Ph₃PAu)₇Co(CO)₂]²⁺ ( 2 ) can be built up with 1 being the main product. 1 crystallizes with PF^?₆ as counterion in the monoclinic space group C2/c with a = 3008.3(6); b = 1339.1(2); c = 2909.4(6) pm; β = 103.08(1)°; Z = 4. The inner core of the cluster cation 1 with the symmetry C₂ has the form of a bicapped trigonal bipyramid with the heteroatom in equatorial position, and distances Au? Au between 280.4(1) and 288.4(1) pm and Co? Au between 254.9(1) and 257.1(2) pm. 2 · (PF₆)₂ crystallizes in the triclinic space group P1 with a = 2155.7(1); b = 1720.6(1); c = 3543.6(1) pm; α = 91.89(1)°; β = 97.51(1); γ = 89.92(1)°; Z = 4. The unit cell contains two symmetry independent cluster cations 2 of about the same geometry. The cluster skeleton Au₇Co can be described as fragment of an icosahedron formed by seven gold atoms with the Co atom in its center. The Au? Au distances range from 274.8(3) to 332.6(3) pm, and the Co? Au distances are 256.8(6) to 264.7(5) pm. The bonding in 1 and 2 is discussed.     

Molybdänhalogenidcluster mit sechs terminalen Alkoholatliganden: (C18H36N2O6Na)2[Mo6Cl8(OCH3)6] · 6CH3OH und (C18H36N2O6Na2)2[Mo6Cl8(OC6H5)6]

Molybdenum(II) Halide Clusters with six Alcoholate Ligands: (C₁₈H₃₆N₂O₆Na)₂[Mo₆Cl₈(OCH₃)₆] · 6CH₃OH and (C₁₈H₃₆N₂O₆Na)₂[Mo₆Cl₈(OC₆H₅)₆] . The reaction of Na₂[Mo₆Cl₈(OCH₃)₆] and 2,2,2-crypt yields (C₁₈H₃₆N₂O₆Na)₂[Mo₆Cl₈(OCH₃)₆] · 6 CH₃OH ( 1 ), which is converted to (C₁₈H₃₆N₂O₆Na)₂[Mo₆Cl₈(OC₆H₅)₆] ( 2 ) by metathesis with phenol. According to single crystal structure determinations ( 1 : P3 1c, a=14.613(3) Å, c=21.036(8) Å; 2 : P3 1c, a=15.624(1) Å, c=19.671(2) Å) the compounds contain anionic clusters [Mo₆Cl₈ⁱ(OR^a)₆]^2? ( 1 : d(Mo—Mo) 2.608(1) Å to 2.611(1) Å, d(Mo—Cl) 2.489(1) Å to 2.503(1) Å, d(Mo—O) 2.046(4) Å; 2 : d(Mo—Mo) 2.602(3) Å to 2.608(3) Å, d(Mo—Cl) 2.471(5) Å to 2.4992(5) Å, d(Mo—O) 2.091(14) Å). Electronic interactions of the halide cluster and the phenolate ligands in [Mo₆Cl₈(OC₆H₅)₆]^2? is investigated by means of UV/VIS spectroscopy and EHMO calculations.     

Synthesis and reactivity of naphthalene sandwich complexes of molybdenum. X-ray structure of [Mo(η6-naphthalene) {P(OMe)3}3] and [Mo(H)(η6-naphthalene){P(OMe)3}3][BF4]

The sandwich complexes bis(η⁶-naphthalene)molybdenum(0) ( 1 ), bis(η⁶-1-methylnaphthalene)molybdenum(0) ( 2 ), and bis(η⁶-1,4-dimethylnaphthalene)molybdenum(0) ( 3 ) are synthesized by cocondensation of Mo-atoms with the naphthalene ligands. Complexes 1–3 are also obtained by reduction of MoCl₅ or MoCl₄. 2THF with highly activated Mg in the presence of the naphthalene ligands. Mg was activated by sublimation of the metal in a simple rotating solution reactor. Complex 2 exists as a mixture of regio- and stereoisomers. Three regioisomers, 3a–c , are formed in reactions of Mo-atoms with 1,4-dimethylnaphthalene, whereas 3a , the isomer with the Mo-atom coordinated to the unsubstituted rings, is formed selectively via the reductive method. The ligands in 1–3 are highly labile. CO displaces both naphthalene rings in 2 and 3 to give [Mo(CO)₆], while PF₃, P(OMe)₃, and PMe₃ displace only one coordinated naphthalene in 1 to yield the [Mo(η⁶-naphthalene)L₃] complexes 4–6 . In toluene, arene exchange is a competitive process in reactions of 1 with PF₃. Complexes 5 (L = P(OMe)₃) and 6 (L = PMe₃) react with HBF₄ to give the cationic metal hydride complexes 8 and 9 . The X-ray crystal structures of [Mo(η⁶-naphthalene) {P(OMe)₃}₃] ( 5 ) and [Mo(H)(η⁶-naphthalene) {P(OMe)₃}₃][BF₄] ( 8 ) are reported.     

Trinuclear copper(I) complex of 1,3-bis(2-pyridinylmethyl)imidazolylidene as a carbene-transfer reagent for the preparation of catalytically active nickel(II) and palladium(II) complexes

Reactions of 1,3-bis(pyridin-2-ylmethyl)-1H-imidazol-3-ium hexafluorophosphate, ([HL1](PF₆), L1 = 1,3-bis(pyridin-2-ylmethyl)imidazolylidene) and 1,3-bis(pyridin-2-ylmethyl)-1H-benzimidazol-3-ium hexafluorophosphate ([HL2](PF₆), L2 = 1,3-bis(pyridin-2-ylmethyl)benzoimidazolylidene) with cuprous oxide in acetonitrile readily yielded trinuclear complexes [Cu₃(L1)₃(PF₆)₃] (1) and [Cu₃(L2)₃(PF₆)₃] (2). Treatment of 1 with Ni(PPh₃)₂Cl₂ and Pd(cod)Cl₂ gave [Ni(L1)Cl](PF₆) (3) and [Pd(L1)Cl](PF₆) (4), respectively, due to transmetalation. [Ni(L1)₂](PF₆)₂ (5) was obtained from the reaction of [Cu₃(L1)₃(PF₆)₃] and Raney nickel in acetonitrile. All these complexes have been fully characterized. Both 1 and 2 consist of a triangular Cu₃ core with each Cu–Cu bond capped by an imidazolylidene group. Each imidazolylidene acts as a bridging ligand in a μ₂ mode and is bonded equally to two Cu(I) ions. The pincer nickel and palladium complexes are square-planar and contain a tridentate NCN ligand. Complexes 3 and 4 are efficient catalyst precursors for Kumada–Corriu and Suzuki–Miyaura coupling reactions of aryl halides with organometallic reagents.     

Syntheses,Structures, and Properties of Phosphorescent Iridium(III) Complexes Containing N‐Heterocyclic Carbene Ligands

The organic salts 1‐(2‐pyridylmethyl)‐3‐alkylbenzimidazolium halide (pm‐RbH ⁺X⁻) and 1‐(2‐pyridylmethyl)‐3‐alkylimidazolium halide (pm‐R′iH ⁺X′⁻) were prepared (where R = 4‐, 3‐, 2‐fluorobenzyl ( 4f , 3f , and 2f , respectively), 4‐, 3‐, 2‐chlorobenzyl ( 4c , 3c , and 2c , respectively); 4‐methoxybenzyl (4mo); 2,3,4,5,6‐pentafluorobenzyl (f₅); benzyl (b); and methyl (m)); X = Cl and Br; R′ = benzyl (b) and methyl (m); and X′ = Cl and I. From these salts, heteroleptic Ir(III ) complexes containing one N ‐heterocyclic carbene (NHC ) ligand [Ir(κ²‐ppy)₂(κ²‐(pm‐Rb))]PF₆ (R = 4f, 1 (PF₆ ); 3f, 2 (PF₆ ); 2f, 3 (PF₆ ); f₅b, 4 (PF₆ ); 4c, 5 (PF₆ ); 3c, 6 (PF₆ ); 2c, 7 (PF₆ ); 4mo, 8 (PF₆ ); b, 9 (PF₆ ); m, 10 (PF₆ )) and [Ir(κ²‐ppy)₂(κ²‐(pm‐R′i))]PF₆ (R = b, 11 (PF₆ ); m, 12 (PF₆ )), were synthesized, and the crystal structures of 1 (PF₆ ), 2 (PF₆ ), 3 (PF₆ ), 5 (PF₆ ), 6 (PF₆ ), 7 (PF₆ ), 9 (PF₆ ), 10 (PF₆ ), and 12 (PF₆ ) were determined by X‐ray diffraction. The neutral NHC ligands 1‐(2‐pyridylmethyl)‐3‐alkylbenzimidazolin‐2‐ylidene (pm‐Rb) and 1‐(2‐pyridylmethyl)‐3‐alkylimidazolin‐2‐ylidene (pm‐R′i) of all cations were found to be involved in the intermolecular π−π stacking interactions with the surrounding cations in the solid state, thereby probably influencing the photophysical behavior in the solid state and in solution. The absorption and emission properties of all the complexes show only small variations.     

Radical Arylation Reactions of 4, 6, 8-Trimethylazulene

The synthesis of 1- and 2-aryl-substituted (aryl = Ph, 4-NO₂? C₆H₄, and 4-MeO? C₆H₄) 4, 6, 8-trimethylazulenes ( 4 and 3 , respectively) in moderate yields by direct arylation of 4, 6, 8-trimethylazulene ( 8 ) with the corresponding arylhydrazines 13 in the presence of Cu^IIions in pyridine (see Scheme 4) as well as with 4-MeO? C₆H₄Pb(OAc)₃ ( 16 ) in CF₃COOH (see Scheme 5) is described. With 13 , also small amounts of 1, 2- and 1, 3-diarylated azulenes (see 14 and 15 , respectively, in Scheme 4) are formed. The 4-methoxyphenylation of 8 with 16 yielded also the 1, 1′-biazulene 17 in minor amounts (see Scheme 5). 4, 6, 8-Trimethyl-2-phenylazulene ( 3a ) was also obtained as the sole product in moderate yields by the reaction of sodium phenylclopentadienide ( 1a ) with 2, 4, 6-trimethylpyrylium tetrafluoroborate ( 2 ) in THF (Scheme 1). The attempted phenylation of 8 as well as of azulene ( 9 ) itself with N-nitroso-N-phenylacetamide ( 10 ) led only to the formation of the corresponding 1-(phenylazo)-substituted azulenes 12 and 11 , respectively (Scheme 3).     

Thiocyanate Compounds of [Nb6Cl12]2+: The structure of A4[Nb6Cl12(NCS)6](H2O)4 (A = K,Rb, NH4)

New compounds of the general formula A₄[Nb₆Cl₁₂(NCS)₆](H₂O)₄ (A = K, Rb, NH₄) were synthesized from Nb₆Cl₁₄ and ASCN in aqueous solutions. X-ray structure refinements were performed on single-crystal data of the three compounds. They are isotypic and crystallize with the space group P1 (Z = 1) and the lattice parameters: a = 877.9(3) pm, b = 1176.6(3) pm, c = 1187.0(3) pm, α = 114.29(1)°, β = 98.96(2)°, γ = 100.91(2)° for K₄[Nb₆Cl₁₂(NCS)₆](H₂O)₄ ( 1 ); a = 887.6(3) pm, b = 1184.0(4) pm, c = 1195.4(4) pm, α = 114.95(2)°, β = 98.84(2)°, γ = 101.31(2)° for Rb₄[Nb₆Cl₁₂(NCS)₆](H₂O)₄ ( 2 ) and a = 886.0(4) pm, b = 1181.1(6) pm, c = 1183.9(6) pm, α = 114.49(2)°, β = 99.48(3)°, γ = 101.53(1)° for (NH₄)₄[Nb₆Cl₁₂(NCS)₆](H₂O)₄ ( 3 ). Each centrosymmetric [Nb₆Cl₁₂(NCS)₆]^4? ion of the isotypic compounds contains six terminal thiocyanate groups being bound to the corners of the octahedral niobium cluster through the nitrogen atoms (d_{Nb? N} = 221.5(6)–224.3(6) pm, bond angles Nb? N? C 168.6(5)–176.4(6)°). The [Nb₆Cl₁₂(NCS)₆]^4? ions are linked via A? S and A? Cl interactions with the A cations. Half of the cations occur to be disordered along two crystallographic sites.