Supramolecular chemistry of half-sandwich organometallic building blocks based on RuCl2(p-cymene)Ph2PCH2Y

A new series of neutral organometallic building blocks based on piano-stool ruthenium(II) complexes, RuCl₂(p-cymene)Ph₂PCH₂Y [Y = -NHC₆H₄(2-CO₂H) (2a), -NHC₆H₄(3-CO₂H) (2b), -NHC₆H₃(3-CO₂H)(6-OCH₃) (2c), -NHC₆H₄(4-CO₂H) (2d), -NHC₆H₃(2-CO₂H)(4-OH) (2e), -NHC₆H₃(3-OH)(4-CO₂H) (2f), -NHC₆H₃(2-CO₂H)(5-CO₂H) (2g) and -OH (2h)], were synthesised in high yields (>88%) from {RuCl₂(p-cymene)}₂ and the appropriate phosphines 1a-1h. The new tertiary phosphine 1b was prepared by Mannich condensation of NH₂C₆H₄(3-CO₂H) with Ph₂PCH₂OH in MeOH. Solution NMR (³¹P{¹H}, ¹H), FT-IR and microanalytical data are in full agreement with the proposed structures. Single crystal X-ray studies confirm that, in each case, compounds 2a, 2b and 2d-2h have piano-stool arrangements with typical Ru-P, Ru-Cl and Ru-C_centroid bond lengths. From our crystallographic studies, factors that influence the supramolecular assemblies of these ruthenium(II) complexes include: (i) the type of functional group present, (ii) the geometric disposition of the -N(H)CH₂PPh₂, -CO₂H and -OH groups around the central benzene scaffold, and (iii) the solvents used in the recrystallisations. Hence in isomers 2a and 2b, molecules are associated into head-to-tail dimer pairs through classical intermolecular O-H?O hydrogen bonding. This feature is also observed in isomer 2d but dimer pairs are further associated to give a 1-D chain through assisted intermolecular N-H?Cl hydrogen bonding. The additional 4-hydroxo group in 2e promotes a ladder arrangement via intermolecular O-H?O and O-H?Cl hydrogen bonding. In contrast the isomeric compound 2f does not show head-to-tail O-H?O hydrogen bonding but instead O-H?Cl and N-H?O intermolecular hydrogen bonding is observed. Depending on the choice of solvent (MeOH or DMSO), 2g forms extended networks based on chains (2g · DMSO · 1.5MeOH) or tapes (2g · 3MeOH). In 2h, a single intramolecular O-H?Cl hydrogen bond is observed for each independent molecule. The X-ray structure of one representative tertiary phosphine, 1f, has also been determined.     

Syntheses, characterizations and crystal structures of triorganotin(IV) derivatives with 2-mercapto-4-quinazolinone

The triorganotin(IV) derivatives of 2-mercapto-4-quinazolinone (HSqualone) of the type, R₃SnL (R = Ph 1, CH₃2, PhCH₂3, p-F-PhCH₂4, o-F-PhCH₂5, n-Bu 6), were obtained by the reaction of the R₃SnCl and HSqualone with 1:1 molar ratio in benzene. All complexes 1-6 were characterized by elemental analyses, IR, ¹H and ¹³C NMR spectroscopy and the crystal structures of complexes 1-3 were also confirmed by X-ray crystallography. The structure analyses reveal that the tin atoms of complexes 1-3 are all distorted tetrahedral geometries. Furthermore, the dimeric structures in complexes 1-3 have also been found linked by intermolecular O-H?N or N-H?O hydrogen bonding interaction. Interestingly, the dimers of complexes 2 and 3 are further linked into one-dimensional chain through intermolecular C-H?S and C-H?O weak hydrogen bonding interactions, respectively.     

Anion-controlled networks of intermolecular interactions in the crystal structure of 9-aminoacridinium salts

A series of salts, with the 9-aminoacridinium cation (9-AA) and aromatic carboxylic acid: benzoate (1), ortho-phthalate (2), and salicylate (3) anions have been synthesized and characterized using X-ray diffraction. In the crystal packing, the ions are linked via N-H?O, O-H?O, and C-H?O hydrogen bonds. Analysis of the hydrogen bonds in the crystal lattices of the title compounds shows that the cations and anions form tetramers. The ions in these tetramers are linked via N(amino)-H?O(carboxy) hydrogen bonds forming R₂²(8) (1 and 3) or R₂⁴(15) (2) hydrogen bond ring motifs. The cations interact through π-π interactions in the ABBA (1), AB (2) or ABA (3) arrangement to form columns (1 and 2) or chains (3).     

New synthesis of 3-arylpyrrolines

We present an easy and straightforward synthesis of 3-arylpyrrolines 4a-g by repeated treatment of 4-aryl-1,2,5,6-tetrahydropyridines 2a-g with m-chloroperoxybenzoic acid (MCPBA) and boron trifluoride etherate (BF₃-OEt₂). The transformation proceeds via epoxidation, ring contraction, Baeyer-Villiger oxidation and elimination reaction and affords 3-arylpyrrolines 4a-g with 61-70% yield. This facile strategy was also used to synthesize racemic baclofen (6).     

Tryst with a molecular and supramolecular oddity: an anti-Fürst-Plattner epoxide opening product as a designer additive for accessing an elusive polymorph

Additive induced polymorphism of a conformationally locked tetraacetate 3 in presence of its diastereomer 4 is described. The ester 3 was specially crafted on a trans-decalin backbone to relegate the O-H?O H-bond donors to the molecular interior and have the peripheral H-bond acceptors in 1,3-syndiaxial relationship. The supramolecular assembly of 3 was destined to evolve along two mutually exclusive pathways, namely one, which employs intermolecular O-H?O H-bonds (pathway 1) and the other that sacrifices these for intramolecular O-H?O H-bonds and settles for a crystal packing dictated by weak intermolecular interactions alone (pathway 2). Exploiting the similarity between the self-assemblies of 4 and the two recently reported dimorphs of 3, the ester 3 has been stimulated to follow the elusive non-hierarchical pathway 2 through preferential inhibition of pathway 1. Interestingly, the inhibitor 4 was obtained serendipitously en route3 via an apparent breakdown of Fürst-Plattner rule.     

C-H and N-H activation by Pt(0) in N- and O-heteroaromatic compounds

The reactions of [Pt(PEt₃)₄] with various azoles afforded platinum(II) hydride complexes of the type trans-[PtH(1-azolyl)(PEt₃)₂], where azolyl=indolyl (1), imidazolyl (2), benzimidazolyl (3), pyrazolyl (4) and indazolyl (5), by oxidative insertion of the metal centre into the N-H bonds of the respective azoles. Pyrrole was much less reactive. Complexes trans-[PtH(R)(PEt₃)₂], where R=2-furyl (6), 2-benzoxazolyl (7) and 2-benzothiazolyl (8) were prepared via C-H bond activation. For benzothiazole, insertion into the C-S bond did not occur. Analogous C-H activation products with 1-methylpyrrole and dibenzofuran could not be isolated.     

A facile synthesis of 1,4-dideoxy-1,4-imino-l-ribitol (LRB) and (−)-8a-epi-swainsonine from d-glutamic acid

A facile synthesis of (−)-8a-epi-swainsonine 2 and 1,4-dideoxy-1,4-imino-l-ribitol (LRB) 4 has been achieved by using the versatile building block 3, which was available from cheap d-glutamic acid. The new forming stereogenic center in synthesis of 2 was constructed by highly selective reduction of the ketone 13 with Li(t-BuO)₃AlH in THF (dr=95:5).     

Remarkable effect of hydrogen bonding between ring and axle components on deslipping reactions of rotaxanes

A series of rotaxanes 1·5, 2·5, 3·5, and 4·5 bearing a different substituent (X = NO₂, Br, H, and OMe, respectively) at para position on the phenol moiety of the ring component exhibit clear difference in deslipping behavior. The difference in the deslipping rates is consistent with the difference in intercomponent hydrogen bonding strength estimated from the O-H stretching vibration wavenumbers. The para substituent dictates the relative strength of the intra- and intermolecular hydrogen bonds. Thus the incorporation of an intramolecular hydrogen bond allows for tunability of the strength of the intercomponent interaction.     

A facile approach for the synthesis of novel substituted 4H-chromenes and condensation reactions of 4H-chromenes leading to chromenopyrrolones and triazolylchromenopyrrolones

A facile method has been developed for the synthesis of 4H-chromene-3-carboxylates 3a–d by the nucleophilic substitution reaction of 2-hydroxy-2H-chromene-3-carboxylates 2a–d with triethylsilane in the presence of BF₃·O(C₂H₅)₂. Cyclocondensation of 4H-chromene-3-carboxylates 3a–d with benzylamines 4a–d afforded a series of 2,3-dihydrochromenopyrrolones 5a–p and with propargylamine afforded 2-propynyl-2,3-dihydrochromenopyrrolones 6a–d. Click reaction of 6a–d with benzyl azides 7a–d provided a series of 1H-1,2,3-triazolylmethyl-2,3-dihydrochromenopyrrolones 8a–p. Thus synthesized compounds 3a–d, 5a–p, 6a–d, and 8a–p are novel heterocyclic compounds and being reported for the first time.     

A facile preparation of trans-1,2-cyclopropanes containing p-trifluoromethylphenyl group and its application to the construction of pyrazole and cyclopropane ring fused pyridazinone derivatives

A facile methodology for the preparation of highly functionalized trans-1,2-cyclopropanes containing p-trifluoromethylphenyl group 3 is described. Arsonium bromides 1 reacted with electron-deficient olefins 2 in the presence of K₂CO₃ to provide 3 stereoselectively in moderate to good yields. This process has been successfully applied to the construction of cyclopropane ring fused pyridazinone derivatives 4 or pyrazole derivatives 5.     

Structural diversity of di and triorganotin complexes with 4-sulfanylbenzoic acid: Supramolecular structures involving intermolecular Sn?O, O-H?O or C-H?X (X = O or S) interactions

Twelve new organotin complexes with 4-sulfanylbenzoic acid of two types: R_nSn[S(C₆H₄COOH)]_4−n (I) (n = 3: R = Me 1, n-Bu 2, Ph 3; PhCH₂4; n = 2: R = Me 5; n-Bu 6, Ph 7, PhCH₂8) and R₃Sn(SC₆H₄COO)SnR₃ · mEtOH (II) (m = 0: R = Me 9, n-Bu 10, PhCH₂12; m = 2: R = Ph 11), along with the 4,4′-bipy adduct of 9, [Me₃Sn(SC₆H₄COO)SnMe₃]₂(4,4-bipy) 13, have been synthesized. The coordination behavior of 4-sulfanylbenzoic acid is monodentate in 1-8 by thiol S atom but not carboxylic oxygen atom. While, in 9-13 it behaves as multidenate by both thiol S atom and carboxylic oxygen atoms. The supramolecular structures of 6, 11 and 13 have been found to consist of 1D molecular chains built up by intermolecular O-H?O, C-H?O or C-H?S hydrogen bonds. The supramolecular aggregation of 7 is 2D network determined by two C-H?O hydrogen bonds. Extended intermolecular C-H?O interactions in the crystal lattice of 9 link the molecules into a 2D network.     

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (Y=H (1a), Me (1b), MeO (1c)) can be prepared either by direct insertion of elemental Te across C_Rf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (Y=H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCl₂ (Y=H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a-c with SO₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂TeI₂ (Y=H (4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of 1a-c with KI, or alternatively, by the oxidative addition of iodine to 2a-c. The reaction of 2a-c with allyl bromide affords the diorganotellurium dibromides 1a-c, rather than the expected triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ¹³C and ¹²⁵Te NMR spectroscopy (solution and solid-state) and in case of 1c also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.     

Palladium-catalyzed oxyarylation of olefins using silver carbonate as the base. Probing the mechanism by electrospray ionization mass spectrometry

The Pd(OAc)₂-catalyzed oxyarylation of electron-rich (8 and 12) and electron-poor (10) olefins by ortho-iodophenols (3a-d) was studied using Ag₂CO₃ as the base, in acetone, and in the presence and absence of PPh₃. The corresponding adducts of oxyarylation were obtained in moderate yields. The reaction mechanism was examined by electrospray ionization mass spectrometry (ESI-MS). Cationic arylpalladium intermediate (14), formed by the oxidative insertion of Pd(0) into 3a, and the cationic palladacycles (15), obtained by reaction of 14 with olefins 8 and 12, were intercepted by ESI-MS and characterized by ESI-MS/MS.     

Synthesis, crystal structure, and chirality of divalent lanthanide reagents containing tri- and tetraglyme

Six new divalent lanthanide complexes using triglyme (trigly) and tetraglyme (tetgly) as achiral ligands have been prepared, using a facile synthetic method, in search for enantioselective solid-state reagents. The crystal structures of cis-[SmI₂(trigly)thf] (1), trans-[YbI₂(trigly)thf] (2), trans-[SmI₂(trigly)dme] (3), trans-[YbI₂(tetgly)] (4), trans-[EuI₂(tetgly)thf] (5), and [Sm(tetgly)₂][SmI₃(tetgly)]I (6) have been determined. All complexes, except 5, are chiral. The 10-coordinate cation in 6 displays a helical chirality since the two tetraglyme ligands are wrapped around the samarium ion. Since trans-[YbI₂(tetgly)] (4), which has a chiral arrangement of terminal methyl groups, crystallizes as a conglomerate, preferential crystallization and consequent enantioselective reduction of acetophenone was attempted, but resulted in racemic products, possibly on account of racemic twinning in 4.     

Olefin insertion in Pd-acyl complexes modified with 1,4-Cs-symmetrical diphosphine ligands

The insertion of ethene and propene was investigated in palladium(II) acyl complexes of the type [PdC(O)CH₃(P^∧P′)(CH₃CN)](OTf) modified with the C_s-symmetric diphosphines 2-4 and the parent ligand 1, described by C_2v-symmetry and taken as a reference.Ethene insertion was investigated for acyl complexes containing the ligands 2 and 3. Two insertion products formed in a ratio of approximately 1:1 for both systems, irrespective of the electronic properties of the ligands.Propene as an α-olefin can insert according to a 1,2- or 2,1-insertion mode into a palladium acyl bond, arising regioselectivity issues. Moreover, due to the C_s-symmetry of the ligands, two stereoisomers can result upon insertion, as the alkyl group of the formed five-membered metallacycle can be cis or trans to each non-equivalent moiety. Propene insertion was indeed neither stereo- nor regioselective in the cases of 3 and 4, in which the products arising from both 1,2- and 2,1-insertion were observed. 2 displayed total control of stereo- and regioselectivity, with the formation of one primary insertion product. Similar regioselectivity was observed for the reference ligand 1. The regioisomeric distribution was different from equimolar for propene insertion, where the ratio of the products might be controlled by a combination of steric and electronic factors.     

N-Bromosuccinimide-mediated reaction of cyclic styrenes with chloramine-T

A facile route toward substituted allylic sulfonamides 3 is developed from the N-bromosuccinimide (NBS)-mediated allylic amination of cyclic styrenes 2 with chloramine-T (1a). Skeleton 2 is prepared by Grignard addition of cyclic ketones with different arylmagnesium bromides in THF followed by dehydration of the resulting tertiary alcohols with BF₃·OEt₂ in CH₂Cl₂. The synthetic route obtained moderate yields from the one-step operation and the key structures of skeleton 3 were confirmed by X-ray crystallographic analysis.     

Mg-promoted reductive coupling of aromatic carbonyl compounds with trimethylsilyl chloride and bis(chlorodimethylsilyl) compounds

Mg-promoted reductive coupling of aromatic carbonyl compounds (1) with chlorosilanes, such as trimethylsilyl chloride (TMSCl:2), 1,2-bis(chlorodimethylsilyl)ethane (3) and 1,5-dichlorohexamethyltrisiloxane (4), in N,N-dimethylformamide (DMF) at room temperature brought about selective and facile reductive formation of both of carbon-silicon and oxygen-silicon bonds to give the corresponding α-trimethylsilylalkyl trimethylsilyl ethers (5) and cyclic siloxanes (6), (7) in moderate to good yields, respectively. The present facile and selective coupling may be initiated through electron transfer from Mg metal to aromatic carbonyl compounds (1).     

A novel and easy two-step,microwave-assisted method for the synthesis of halophenyl pyrrolo[2,3-b]quinoxalines via their pyrrolo precursors. Evaluation of their bioactivity

A novel, two-step, facile route for the synthesis of pyrrolo[2,3-b]quinoxalines via 2,3-dioxopyrroles, enhanced by microwave irradiation, is presented. The newly synthesized 2,3-dioxo-5-halophenyl pyrrolo precursors 4a–c as well as the non-aromatized ethyl 2-(4-halophenyl)-1-methyl-2,4-dihydro-1H-pyrrolo[2,3-b]quinoxaline-3-carboxylates 6a–c and the aromatized ethyl 2-(4-halophenyl)-1-methyl-1H-pyrrolo[2,3-b]quinoxaline-3-carboxylates 7a–c were evaluated for their antioxidant, cytostatic, and antiviral properties. Most of them proved to be potent hydroxyl radical scavengers and inhibited in vitro lipid peroxidation. The compounds showed moderate antiproliferative activity, while 6a inhibited vaccinia virus at an EC₅₀ value of 2 μM, and 4c and 6c inhibited Sindbis virus at EC₅₀ values of 4 μM.     

Orthidines A-E, tubastrine, 3,4-dimethoxyphenethyl-β-guanidine, and 1,14-sperminedihomovanillamide: potential anti-inflammatory alkaloids isolated from the New Zealand ascidian Aplidium orthium that act as inhibitors of neutrophil respiratory burst

In addition to the known dihydroxystyrylguanidine alkaloid tubastrine (1), five new dimers, orthidines A-E (2-6) and the biosynthetically unrelated 1,14-sperminedihomovanillamide (orthidine F, 7) were isolated from the New Zealand ascidian Aplidium orthium. The structures of the new compounds, elucidated by interpretation of spectroscopic data, encompass benzodioxane neolignan-type scaffolds (2-5) and a 1,2,3,4-tetrasubstituted cyclobutane (6), the latter likely having arisen via [_π2_s+_π2_s] dimerization of tubastrine. The subunit head-to-tail orientation of dimer 6 was established unambiguously by interpretation of data from a ²J,³J-HMBC NMR experiment. The structure of 7 was also confirmed by facile synthesis. Compounds 1-4, 6, and 7 inhibited the in vitro production of superoxide by PMA-stimulated human neutrophils in a dose-dependent manner with IC₅₀s of 10-36 μM and this was associated with inhibition of superoxide production by neutrophils in vivo in a murine model of gouty inflammation.     

Syntheses and coordination behaviour of 2-(ortho-phosphinophenyl)-functionalised 1,3-dioxolanes and 1,3-dioxanes towards a [(COD)Rh]-complex fragment - models for immobilised complexes

The syntheses are reported of the ether-phosphine ligands: 2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane (1a), 2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane (1b), 2-(ortho-diphenylphosphinophenyl)-1,3-dioxane (1c), 2-(ortho-diisopropylphosphinophenyl)-1,3-dioxane (1d). Their reaction with [(COD)RhCl]₂ (COD: 1,5-cyclooctadiene) results in the formation of the mononuclear complexes: {chloro(COD)[2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane]rhodium(I)} (2a), {chloro(COD)[2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane]rhodium(I)} (2b), {chloro(COD)[2-(ortho-diphenylphosphinophenyl)-1,3-dioxane]rhodium(I)} (2c), and {chloro(COD)[2-(ortho-diisopropylphosphinophenyl)-1,3-dioxane]rhodium(I)} (2d). The chloride ligands of compounds 2a and 2b were abstracted with TlPF₆, with accompanied insertion of an acetal oxygen atom of the ligands 1a and 1b into the coordination sphere of the metal centre, producing {(COD)[η²-P,O-2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane]rhodium(I)}PF₆ (3a∗PF₆) and {(COD)[η²-P,O-2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane]rhodium(I)}PF₆ (3b∗PF₆). In contrast the dioxane analogues of 3, 3c∗BF₄ and 3d∗BF₄, were formed by reacting the ligands 1c, 1d with [Rh(COD)₂]BF₄. The ligands 1 and the complexes 2 serve as model compounds for their via acetalation to a polyvinylalcohol resin bound analogues. The complexes synthesised were employed as pre-catalysts in the hydroformylation reaction of 1-octene.