Jahn-Teller-distorted dimeric anions in (cat)[Mn2F8(H2O)2]·2H2O (cat = pipzH2, dabcoH2) and (dabcoH2)2[Mn2F8(H2PO4)2]

Using biprotonated dabco (1,4-diazabicyclo[2.2.2]octane) or pipz (piperazine) as counter cations, mixed-ligand fluoromanganates(III) with dimeric anions could be prepared from hydrofluoric acid solutions. The crystal structures were determined by X-ray diffraction on single crystals: dabcoH₂[Mn₂F₈(H₂O)₂]·2H₂O (1), space group P2₁, Z = 2, a = 6.944(1), b = 14.689(3), c = 7.307(1) Å, β = 93.75(3)°, R₁ = 0.0240; pipzH₂[Mn₂F₈(H₂O)₂]·2H₂O (2), space group , Z = 2, a = 6.977(1), b = 8.760(2), c = 12.584(3) Å, α = 83.79(3), β = 74.25(3), γ = 71.20(3)°, R₁ = 0.0451; (dabcoH₂)₂[Mn₂F₈(H₂PO₄)₂] (3), space group P2₁/n, Z = 4, a = 9.3447(4), b = 12.5208(4), c = 9.7591(6) Å, β = 94.392(8)°, R₁ = 0.0280. All three compounds show dimeric anions formed by [MnF₅O] octahedra (O from oxo ligands) sharing a common edge, with strongly asymmetric double fluorine bridges. In contrast to analogous dimeric anions of Al or Fe(III), the oxo ligands (H₂O (1,2) or phosphate (3)) are in equatorial trans-positions within the bridging plane. The strong pseudo-Jahn-Teller effect of octahedral Mn(III) complexes is documented in a huge elongation of an octahedral axis, namely that including the long bridging Mn-F bond and the Mn-O bond. In spite of different charge of the anion in the fluoride phosphate, the octahedral geometry is almost the same as in the aqua-fluoro compounds. The strong distortion is reflected also in the ligand field spectra.     

Trimetallic FePd2 and FePt2 4-ferrocenyl-NCN pincer complexes

Ferrocene-bridged NCN pincer complexes of structural type Fe(η⁵-C₅H₄-4-NCN-1-MX)₂ (X = I: 6, M = Pd; 7, M = Pt; X = Cl: 8, M = Pt; NCN = [4-C₆H₂(CH₂NMe₂)₂-2,6]⁻) are accessible by the subsequent reaction of Fe(η⁵-C₅H₄-4-NCNH)₂ (4) with ⁿBuLi and [PtCl₂(SEt₂)₂] (synthesis of 8) or treatment of Fe(η⁵-C₅H₄-4-NCN-1-I)₂ (5) with [Pd₂(dba)₃] (synthesis of 6) or [Pt(tol)₂(SEt₂)]₂ (synthesis of 7) (dba = dibenzylidene acetone, tol = 4-tolyl). In addition, the Sonogashira cross-coupling of Fe(η⁵-C₅H₄I)₂ (1) with HCC-4-NCNH (2) gives Fe(η⁵-C₅H₄-CC-4-NCNH)₂ (3). The reaction behavior of 3 towards ^tBuLi is reported as well.Cyclovoltammetric studies show that the ferrocene entity can be oxidized reversibly. The Fe(II)/Fe(III) potential decreases with increasing electron density at the NCN pincer units due to the presence of the M-halide moiety (M = Pd, Pt).The solid state structure of Fe(η⁵-C₅H₄-4-NCN-1-PdI)₂ (6) is presented. In 6 the Fe(η⁵-C₅H₄)₂ unit connects two NCN-PdI pincer entities with palladium in a square-planar environment. The cyclopentadienyl ligands show a staggered conformation. The C₆H₂ rings are tilted by 23.5(3)° towards the C₅H₄ entities and the C₆H₂ plane is almost coplanar with the coordination plane (10.3(3)°).     

New cationic palladium (II) and rhodium (I) complexes of [Ph2PCH2C(Ph)N(2,6-Me2C6H3)]

Treatment of the bulky iminophosphine ligand [Ph₂PCH₂C(Ph)N(2,6-Me₂C₆H₃)] (L) with [M(CH₃CN)₂(ligand)]⁺ⁿ, where for M = Pd(II): ligand = η³-allyl, n = 1, and for M = Rh(I), ligand: 2(C₂H₄), 2(CO) or cod, n = 0, yields the mono-cationic iminophosphine complexes [Pd(η³-C₃H₅)(L)][BF₄] (1), [Rh(cod)(L)][BF₄] (2), [Rh(CO)(CH₃CN)(L)][BF₄] (3), and cis-[Rh(L)₂][BF₄] (4). All the new complexes have been characterised by NMR spectroscopy and X-ray diffraction. Complex 1 shows moderate activity in the copolymerisation of CO and ethene but is inactive towards Heck coupling of 4-bromoacetophenone and n-butyl acrylate.     

Organoselenium(II) and selenium(IV) compounds containing 2-(Me2NCH2)C6H4 moieties: solution behavior and solid state structure

The cleavage of the Se-Se bond in [2-(Me₂NCH₂)C₆H₄]₂Se₂ (1) was achieved by treatment with SO₂Cl₂ (1:1 molar ratio) or elemental halogens to yield [2-(Me₂NCH₂)C₆H₄]SeX [X = Cl (2), Br (3), I (4)]. Oxidation of 1 with SO₂Cl₂ (1:3 molar ratio) gave [2-(Me₂NCH₂)C₆H₄]SeCl₃ (5). [2-(Me₂NCH₂)C₆H₄]SeS(S)CNR₂ [R = Me (6), Et (7)] were prepared by reacting [2-(Me₂NCH₂)C₆H₄]SeBr with Na[S₂CNR₂] · nH₂O (R = Me, n = 2; R = Et, n = 3). The reaction of 3 with K[(SPMe₂)(SPPh₂)N] resulted in isolation of [2-(Me₂NCH₂)C₆H₄]Se-S-PMe₂N-PPh₂S (8). The compounds were characterized by solution NMR spectroscopy (¹H, ¹³C, ³¹P, ⁷⁷Se, 2D experiments). The solid-state molecular structures of 2, 4-8 were established by single crystal X-ray diffraction. All compounds are monomeric, with the N atom of the pendant CH₂NMe₂ arm involved in a three-center-four-electron N?Se-X (X = halogen, S) bond. This results in a T-shaped coordination geometry for the Se(II) atom in 2, 4, 6-8. In 5, the Se(IV) atom achieves a square pyramidal coordination in the mononuclear unit. Loosely connected dimers are formed through intermolecular Se?Cl interactions (3.40 Å); the overall coordination geometry being distorted octahedral. In all compounds hydrogen bonds involving halide or sulfur atoms generate supramolecular associations in crystals.     

Thermodynamic studies on SrFe12O19(s), SrFe2O4(s), Sr2Fe2O5(s) and Sr3Fe2O6(s)

The citrate-nitrate gel combustion route was used to prepare SrFe₂O₄(s), Sr₂Fe₂O₅(s) and Sr₃Fe₂O₆(s) powders and the compounds were characterized by X-ray diffraction analysis. Different solid-state electrochemical cells were used for the measurement of emf as a function of temperature from 970 to 1151 K. The standard molar Gibbs energies of formation of these ternary oxides were calculated as a function of temperature from the emf data and are represented as (SrFe₂O₄, s, T)/kJ mol⁻¹ (±1.7)=−1494.8+0.3754 (T/K) (970?T/K?1151). (Sr₂Fe₂O₅, s, T)/kJ mol⁻¹ (±3.0)=−2119.3+0.4461 (T/K) (970?T/K?1149). (Sr₃Fe₂O₆, s, T)/kJ mol⁻¹ (±7.3)=−2719.8+0.4974 (T/K) (969?T/K?1150).Standard molar heat capacities of these ternary oxides were determined from 310 to 820 K using a heat flux type differential scanning calorimeter (DSC). Based on second law analysis and using the thermodynamic database FactSage software, thermodynamic functions such as Δ_fH°(298.15 K), S°(298.15 K) S°(T), C_p°(T), H°(T), {H°(T)-H°(298.15 K)}, G°(T), free energy function (fef), Δ_fH°(T) and Δ_fG°(T) for these ternary oxides were also calculated from 298 to 1000 K.     

Synthesis and structure of [C6H14N2][(UO2)4(HPO4)2(PO4)2(H2O)]·H2O: An expanded open-framework amine-bearing uranyl phosphate

A new open-framework compound, [C₆H₁₄N₂][(UO₂)₄(HPO₄)₂(PO₄)₂(H₂O)]·H₂O, (DUP-1) has been synthesized under mild hydrothermal conditions. The resulting structure consists of diprotonated DABCOH₂²⁺ (C₆H₁₄N₂²⁺) cations and occluded water molecules occupying the channels of a complex uranyl phosphate three-dimensional framework. The anionic lattice contains uranophane-like sheets connected by hydrated pentagonal bipyramidal UO₇ units. [C₆H₁₄N₂][(UO₂)₄(HPO₄)₂(PO₄)₂(H₂O)]·H₂O possesses five crystallographically unique U centers. U(VI) is present here in both six- and seven-coordinate environments. The DABCOH₂²⁺ cations are held within the channels by hydrogen bonds to both two uranyl oxygen atoms and a μ₂-O atom. Crystallographic data (193 K, Mo Kα, λ=0.71073 Å): DUP-1, monoclinic, P2₁/n, a=7.017(1) Å, b=21.966(4) Å, c=17.619(3) Å, β=90.198(3)°, Z=4, R(F)=4.76% for 382 parameters with 6615 reflections with I>2σ(I).     

Syntheses, crystal structures and luminescent properties of two novel lanthanide/4-pya complexes: [Ln(4-pya)3(H2O)2]2 (Ln = Eu, La; 4-pya = trans-4-pyridylacrylate)

Reactions of Ln₂O₃ and trans-4-pyridylacrylic acid (4-Hpya) in EtOH/H₂O or MeOH/H₂O produced two new lanthanide/4-pya complexes [Ln(4-pya)₃(H₂O)₂]₂ (1: Ln = Eu; 2: Ln = La) in low yields. However, reactions of LnCl₃ · 6H₂O with 4-Hpya/aqueous ammonia in EtOH/H₂O or MeOH/H₂O gave rise to 1 or 2 in higher yields. Both compounds were structurally characterized by elemental analysis, IR spectroscopy and X-ray analysis. Compounds 1 · 2EtOH · 2H₂O and 2 · 2MeOH · 2H₂O were confirmed to possess one-dimensional polymeric chain structures. In the structure of 1, each Eu(III) adopts a monocapped square-antiprism coordination geometry and each dimer [Eu(4-pya)₃(H₂O)₂]₂ within the chain is interconnected by two pairs of different bridging 4-pya ligands. On the other hand, each La(III) of 2 takes a bicapped square-antiprism coordination geometry and each dimer [La(4-pya)₃(H₂O)₂]₂ within the chain is linked by two pairs of tridentate bridging 4-pya ligands. The luminescent properties of 1 and 2 in the solid state were investigated.     

Synthesis and characterization of organophosphine/phosphite stabilized silver(I) methanesulfonates: Crystal structures of [Ph3PAgO3SCH3] and [(Ph3P)2AgO3SCH3]

Six organophosphine/phosphite stabilized silver(I) methanesulfonates of type [L_nAgO₃SCH₃] (L = Ph₃P, n = 1, 2a; n = 2, 2b; n = 3, 2c; L = (EtO)₃P; n = 1, 2d; n = 2, 2e; n = 3, 2f) were synthesized by the reaction of silver methanesulfonates with triphenylphosphine or triethylphosphite in dichloromethane under nitrogen atmosphere. These complexes were obtained in high yields and characterized by elemental analysis, ¹H-, ¹³C{H} NMR, IR spectroscopy and thermogravimetric analysis (TGA), respectively. X-ray single crystal analysis reveals that complex 2a is a tetramer [Ph₃PAgO₃SCH₃]₄ and complex 2b is a monomer. The thermal stability of 2a has been studied by applying thermogravimetric analysis. It starts to decompose between 50 and 440 °C in a three-step process. The final residue (Ag) is about 20.50%.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Synthesis and crystal structure of new uranyl tungstates M2(UO2)(W2O8) (M=Na, K), M2(UO2)2(WO5)O (M=K, Rb), and Na10(UO2)8(W5O20)O8

The solid-state reactions of UO₃ and WO₃ with M₂CO₃ (M=Na, K, Rb) at 650°C for 5 days result, accordingly the starting stoichiometry, in the formation of M₂(UO₂)(W₂O₈) (M=Na (1), K (2)), M₂(UO₂)₂(WO₅)O (M=K (3), Rb (4)), and Na₁₀(UO₂)₈(W₅O₂₀)O₈ (5). The crystal structures of compounds 2, 3, 4, and 5 have been determined by single-crystal X-ray diffraction using Mo(Kα) radiation and a charge-coupled device detector. The crystal structures were solved by direct methods and Fourier difference techniques, and refined by a least-squares method on the basis of F² for all unique reflections. For (1), unit-cell parameters were determined from powder X-ray diffraction data. Crystallographic data: 1, monoclinic, a=12.736(4) Å, b=7.531(3) Å, c=8.493(3) Å, β=93.96(2)°, ρ_cal=6.62(2) g/cm³, ρ_mes=6.64(1) g/cm³, Z=4; 2, orthorhombic, space group Pmcn, a=7.5884(16) Å, b=8.6157(18) Å, c=13.946(3) Å, ρ_cal=6.15(2) g/cm³, ρ_mes=6.22(1) g/cm³, Z=8, R1=0.029 for 80 parameters with 1069 independent reflections; 3, monoclinic, space group P2₁/n, a=8.083(4) Å, b=28.724(5) Å, c=9.012(4) Å, β=102.14(1)°, ρ_cal=5.83(2) g/cm³, ρ_mes=5.90(2) g/cm³, Z=8, R1=0.037 for 171 parameters with 1471 reflections; 4, monoclinic, space group P2₁/n, a=8.234(1) Å, b=28.740(3) Å, c=9.378(1) Å, β=104.59(1)°, ρ_cal=6.13(2) g/cm³,  g/cm³, Z=8, R1=0.037 for 171 parameters with 1452 reflections; 5, monoclinic, space group C2/c, a=24.359(5) Å, b=23.506(5) Å, c=6.8068(14) Å, β=94.85(3)°, ρ_cal=6.42(2) g/cm³,  g/cm³, Z=8, R1=0.036 for 306 parameters with 5190 independent reflections. The crystal structure of 2 contains linear one-dimensional chains formed from edge-sharing UO₇ pentagonal bipyramids connected by two octahedra wide (W₂O₈) ribbons formed from two edge-sharing WO₆ octahedra connected together by corners. This arrangement leads to [UW₂O₁₀]²⁻ corrugated layers parallel to (001). Owing to the unit-cell parameters, compound 1 probably contains similar sheets parallel to (100). Compounds 3 and 4 are isostructural and the structure consists of bi-dimensional networks built from the edge- and corner-sharing UO₇ pentagonal bipyramids. This arrangement creates square sites occupied by W atoms, a fifth oxygen atom completes the coordination of W atoms to form WO₅ distorted square pyramids. The interspaces between the resulting [U₂WO₁₀]²⁻ layers parallel to plane are occupied by K or Rb atoms. The crystal structure of compound 5 is particularly original. It is based upon layers formed from UO₇ pentagonal bipyramids and two edge-shared octahedra units, W₂O₁₀, by the sharing of edges and corners. Two successive layers stacked along the [100] direction are pillared by WO₄ tetrahedra resulting in sheets of double layers. The sheets are separated by Na⁺ ions. The other Na⁺ ions occupy the rectangular tunnels created within the sheets. In fact complex anions W₅O₂₀¹⁰⁻ are built by the sharing of the four corners of a WO₄ tetrahedron with two W₂O₁₀ dimmers, so, the formula of compound 5 can be written Na₁₀(UO₂)₈(W₅O₂₀)O₈.     

Synthesis and properties of pyrazine-pillared Ag3Mo2O4F7 and AgReO4 layered phases

The new pyrazine-pillared solids, AgReO₄(C₄H₄N₂) (I) and Ag₃Mo₂O₄F₇(C₄H₄N₂)₃ (C₄H₄N₂=pyrazine, pyz) (II), were synthesized by hydrothermal methods at 150 °C and characterized using single crystal X-ray diffraction (I—P2₁/c, No. 14, Z=4, a=7.2238(6) Å, b=7.4940(7) Å, c=15.451(1) Å, β=92.296(4)°; II—P2/n, No. 13, Z=2, a=7.6465(9) Å, b=7.1888(5) Å, c=19.142(2) Å, β=100.284(8)°), thermogravimetric analysis, UV-Vis diffuse reflectance, and photoluminescence measurements. Individual Ag(pyz) chains in I are bonded to three perrhenate ReO₄^- tetrahedra per layer, while each layer in II contains sets of three edge-shared Ag(pyz) chains (π-π stacked) that are edge-shared to four Mo₂O₄F₇^3- dimers. A relatively small interlayer spacing results from the short length of the pyrazine pillars, and which can be removed at just slightly above their preparation temperature, at >150-175 °C, to produce crystalline AgReO₄ for I, and Ag₂MoO₄ and an unidentified product for II. Both pillared solids exhibit strong orange-yellow photoemission, at 575 nm for I and 560 nm for II, arising from electronic excitations across (charge transfer) band gaps of 2.91 and 2.76 eV in each, respectively. Their structures and properties are analyzed with respect to parent ‘organic free’ silver perrhenate and molybdate solids which manifest similar photoemissions, as well as to the calculated electronic band structures.     

Hydroxy- and boronic-acid-functionalized carbosilanes: Synthesis and solid state structure of Si(C6H4-4-SiMe2((CH2)3OH))4

Consecutive synthesis methodologies for the preparation of carbosilanes (Ph)(Me)Si((CH₂)₃B(OH)₂)₂ (2), Si(C₆H₄-4-SiMe₂((CH₂)₃B(OH)₂))₄ (5), (Ph)(Me)Si((CH₂)₃OH)₂ (3), and Si(C₆H₄-4-SiMe_3−n((CH₂)₃OH)_n)₄ (6a, n = 1; 6b, n = 2; 6c, n = 3) are reported. Boronic acids 2 and 5 are accessible by treatment of (Ph)(Me)Si(CH₂CHCH₂)₂ (1) or Si(C₆H₄-4-SiMe₂(CH₂CHCH₂))₄ (4a) with HBBr₂·SMe₂ followed by addition of water, while 3 and 6 are available by the hydroboration of 1 or Si(C₆H₄-4-SiMe_3−n(CH₂CHCH₂)_n)₄ (4a, n = 1; 4b, n = 2; 4c, n = 3) with H₃B·SMe₂ and subsequent oxidation with H₂O₂.The single molecular structure of 6a in the solid state is reported. Representative is that 6a crystallized in the chiral non-centrosymmetric space group P2₁2₁2₁ forming 2D layers due to intermolecular hydrogen bond formation of the HO functionalities along the crystallographic a and c axes.     

Syntheses and study on nickel and copper complexes with 1,3,5-benzenetricarboxylic acid. Crystal and molecular structure of [Cu3(mdpta)3(btc)](ClO4)3 · 4H2O

Nickel and copper complexes containing 1,3,5-benzenetricarboxylic acid, with a combination of selected N-donor ligands and Schiff bases, of the composition Ni₃(bimz)₆(btc)₂ · 12H₂O (1), Ni₃(btz)₉(btc)₂ · 12H₂O (2), Ni₂(L₁)(btc) · 7H₂O (3), Ni₃(L₂)₂(Hbtc) · 9H₂O (4), Ni₂(L₃)(btc) · 4H₂O (5), Cu₂(L₄)(btc) · 7H₂O (6), [Cu₃(pmdien)₃(btc)](ClO₄)₃ · 6H₂O (7) and [Cu₃(mdpta)₃(btc)](ClO₄)₃ · 4H₂O (8); H₃btc = 1,3,5-benzenetricarboxylic acid, bimz = benzimidazole, btz = 1,2,3-benztriazole, L₁ = 2-[(phenylimino)methyl]phenol, L₂ = N,N′-bis-(salicylidene)propylenediamine, L₃ = 2-{[(2-nitrophenyl)methylene]amino}phenol, L₄ = 2-[(4-methoxy-phenylimino)methyl]phenol, pmdien = N,N,N′,N″,N″-pentamethyldiethylenetriamine, mdpta = N,N-bis-(3-aminopropyl)methylamine, have been synthesized. The complexes have been studied by elemental analysis, IR, UV–Vis spectroscopies, magnetochemical and conductivity measurements and selected compounds also by thermal analysis. The crystal and molecular structure of complex 8 was solved. The complex is trinuclear with btc³⁻-bridge. The coordination polyhedron around each copper atom can be described as a distorted square with a CuON₃ chromophore formed by one oxygen atom of carboxylate and three nitrogen atoms of mdpta. The magnetic properties of 8 have been studied in the 1.8–300 K temperature range revealing a very weak antiferromagnetic exchange interaction with J = −0.56 cm⁻¹ for g = 2.13(9). The antimicrobial activities against selected strains of bacteria were evaluated. It was found that only complex 5 is able to inhibit the growth of Staphylococcus strains.     

Synthesis and characterization of organophosphine/phosphite stabilized silver(I) complexes bearing 2-acetyl-1,3-indandione ligand,crystal structure of [Ph3P·AgC11H7O3]

Six organophosphine/phosphite stabilized silver(I) complexes of 2-acetyl-1,3-indandione (2-AID) of type L_n·AgC₁₁H₇O₃ (L = PPh₃; n = 1, 2a; n = 2, 2b; L = P(OMe)₃; n = 1, 2c; n = 2, 2d; L = P(OEt)₃; n = 1, 2e; n = 2, 2f) have been prepared by reacting of [AgC₁₁H₇O₃], which could be obtained by reacting of 2-AID with AgNO₃, with triphenylphosphine, trimethylphosphite, or triethylphosphite in 1:1–2 M ratio. These complexes were obtained in high yields and characterized by elemental analysis, ¹H, ¹³C{H} NMR, IR spectroscopy, and thermal analysis (TG and DSC), respectively. The molecular structure of 2a has been determined by X-ray single crystal analysis in which the silver atom is in a distorted trigonal geometry.     

Chiral “P-N-P” ligands, (C20H12O2)PN(R)PY2 [R = CHMe2, Y = C6H5, OC6H5, OC6H4-4-Me, OC6H4-4-OMe or OC6H4-4-Bu] and their allyl palladium complexes

Chiral “P-N-P” ligands, (C₂₀H₁₂O₂)PN(R)PY₂ [R = CHMe₂, Y = C₆H₅ (1), OC₆H₅ (2), OC₆H₄-4-Me (3), OC₆H₄-4-OMe (4) or OC₆H₄-4-^tBu (5)] bearing the axially chiral 1,1′-binaphthyl-2,2′-dioxy moiety have been synthesised. Palladium allyl chemistry of two of these chiral ligands (1 and 2) has been investigated. The structures of isomeric η³-allyl palladium complexes, (R′ = Me or Ph; Y = C₆H₅ or OC₆H₅) have been elucidated by high field two-dimensional NMR spectroscopy. The solid state structure of [Pd(η³-1,3-Ph₂-C₃H₃){κ²-(racemic)-(C₂₀H₁₂O₂)PN(CHMe₂)PPh₂}](PF₆) has been determined by X-ray crystallography. Preliminary investigations show that the diphosphazanes, 1 and 2 function as efficient auxiliary ligands for catalytic allylic alkylation but give rise to only moderate levels of enantiomeric excess.     

Combinatorial topology of uranyl molybdate sheets: syntheses and crystal structures of (C6H14N2)3[(UO2)5(MoO4)8](H2O)4 and (C2H10N2)[(UO2)(MoO4)2]

Two new mixed organic-inorganic uranyl molybdates, (C₆H₁₄N₂)₃[(UO₂)₅(MoO₄)₈](H₂O)₄ (1) and (C₂H₁₀N₂)[(UO₂)(MoO₄)₂] (2), have been obtained by hydrothermal methods. The structure of 1 [triclinic, , Z=1, a=11.8557(9), b=11.8702(9), c=12.6746(9) Å, α=96.734(2)°, β=91.107(2)°, γ=110.193(2)°, V=1659.1(2) Å] has been solved by direct methods and refined on the basis of F² for all unique reflections to R1=0.058, which was calculated for the 5642 unique observed reflections (|F_o|?4σ_F). The structure contains topologically novel sheets of uranyl square bipyramids, uranyl pentagonal bipyramids, and MoO₄ tetrahedra, with composition [(UO₂)₅(MoO₄)₈]⁶⁻, that are parallel to (−101). H₂O groups and 1,4-diazabicyclo [2.2.2]-octane (DABCO) molecules are located in the interlayer, where they provide linkage of the sheets. The structure of 2 [triclinic, , Z=2, a=8.4004(4), b=11.2600(5), c=13.1239(6) Å, α=86.112(1)°, β=86.434(1)°, γ=76.544(1)°, V=1203.14(10) Å] has been solved by direct methods and refined on the basis of F² for all unique reflections to R1=0.043, which was calculated for 5491 unique observed reflections (|F_o|?4σ_F). The structure contains topologically novel sheets of uranyl pentagonal bipyramids and MoO₄ tetrahedra, with composition [(UO₂)(MoO₄)₂]²⁻, that are parallel to (110). Ethylenediamine molecules are located in the interlayer, where they provide linkage of the sheets. All known topologies of uranyl molybdate sheets of corner-sharing U and Mo polyhedra can be described by their nodal representations (representations as graphs in which U and Mo polyhedra are given as black and white vertices, respectively). Each topology can be derived from a simple black-and-white graph of six-connected black vertices and three-connected white vertices by deleting some of its segments and white vertices.     

Heterometallic Cr2/Ag2 1D polymer: Synthesis,structure and properties

A 1D heterometallic Cr₂/Ag₂ polymer formulated as {[Ag(μ-H₂O)Ag(nta)Cr(μ-OH)(μ-AcO,O′)Cr(nta)]·H₂O}_n (1) (H₃nta = nitrilotriacetic acid) has been prepared and structurally characterized. {Cr(μ-OH)(μ-OAc)Cr} dimeric units containing two different bridging ligands, hydroxo and acetate groups are coordinated to six Ag atoms forming the 1D network. The temperature dependence of magnetic susceptibility for 1 which was fitted with an isotropic Hamiltonian including biquadratic exchange parameters, yielded antiferromagnetic interaction parameters (J = −8.5(1), j = −0.50(7) cm⁻¹ g = 2.0).     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.