Copper-catalyzed cross-coupling of aryl iodides and aryl acetylenes using microwave heating

An efficient copper-catalyzed cross-coupling of aryl iodides with aryl acetylenes under microwave irradiation is described. The reaction proceeds under microwave heating with 10 mol % CuI and 2 equiv Cs₂CO₃ in 43-87% yields.     

Efficient C-S cross coupling catalyzed by Cu2O

A protocol for the copper-catalyzed C-S bond formation between aryl, alkyl, or heteroaryl thiols and aryl or heteroaryl halides is reported. The reaction is catalyzed by Cu₂O which shows the highest catalytic activity with ethyl 2-oxocyclohexanecarboxylate ligand in DMSO at 80 °C. The corresponding coupling products are obtained with good to excellent yields under relatively mild reaction conditions with good chemoselectivity and functional group tolerance.     

CuO nanoparticles: an efficient and recyclable catalyst for cross-coupling reactions of organic diselenides with aryl boronic acids

We present here an efficient and ligand-free cross-coupling reaction of organic diselenides with aryl boronic acids using a catalytic amount of CuO nanoparticles in DMSO at 100 °C under air atmosphere. This is a general cross-coupling reaction and was performed with organic diselenides and aryl boronic acids bearing electron-withdrawing and electron-donating groups affording the corresponding selenides in good to excellent yields. The CuO nanoparticles can be easily recovered and utilized for further catalytic reactions.     

Catalyst free,base free microwave irradiated synthesis of aryl nitrites from potassium aryltrifluoroborates and bismuth nitrate

A mixture of bismuth nitrate pentahydrate and potassium aryltrifluoroborate in toluene under microwave heating at 120 °C for 20 min provides an interesting and mild reaction protocol for the synthesis of aryl nitrite. The conversion to aryl nitrites from aryltrifluoroborates without transition metal catalyst and base in high yields is remarkable.     

Efficient cyanation of aryl bromides with K4[Fe(CN)6] catalyzed by a palladium-indolylphosphine complex

This study describes a general palladium-catalyzed cyanation of aryl bromides using K₄[Fe(CN)₆] as the cyanide surrogate. The reactions can be successfully conducted under mild reaction conditions (at 50 °C) in mixed solvents (water/MeCN = 1:1) without any surfactant additives, and afford the desired aryl nitriles in good-to-excellent yields. Particularly noteworthy is that this system allows the mildest reaction temperature reported so far for palladium-catalyzed cyanation of aryl bromides with K₄[Fe(CN)₆] source in general. Common functional groups, including keto, aldehyde, free amine, and heterocyclic substrates are compatible under this system. Interestingly, the phosphine ligands bearing -PCy₂ moiety, which usually show excellent activity in aryl halide couplings, are found less effective than the corresponding ligands with -PPh₂ group.     

A general rhodium-catalyzed cross-coupling reaction of thiols with aryl iodides

The general procedure for the rhodium-catalyzed cross-coupling of thiols with aryl iodides is described. The catalytic system consists of 5 mol % of [RhCl(cod)]₂ and 10 mol % of PPh₃ as a ligand. A variety of aryl iodides reacted with thiols, giving aryl thioethers in good to excellent yields. It is important to note that the deactivated aryl iodides such as 4-iodoanisole is worked smoothly to provide the corresponding aryl thioethers in excellent yields. Functional groups such as free-amines, chloro, are all tolerated under the employed reaction conditions.     

A highly active and stable imidazolidine-bridged N,O-donor ligand for efficient palladium catalyzed Suzuki–Miyaura reactions in water

Abstract  

We have used the sterically hindered N,O-donor ligand 1,4-bis(2-hydroxy-3,5-di-tert-butyl-benzyl)-imidazolidine with various Pd salts as a catalyst for the Suzuki reaction. This system exhibited excellent catalytic activity in Suzuki reactions of arylboronic acids with aryl halides, including aryl iodides, aryl bromides and activated aryl chlorides, using aqueous methanol as solvent under mild conditions. The catalytic system can be reused once without significant loss of activity.     

Rapid Microwave Induced Palladium Catalyzed Amination of Aryl Bromides

 The palladium-catalyzed coupling reaction of aryl bromides with various amines under microwave irradiation was studied using PdCl₂ [P(o-tolyl)₃]₂ which gave various aryl amines in good yields. The reactions were carried out under normal atmospheric conditions.     

Photocatalytic reaction of aryl amines/alcohols on TiO<Subscript>2</Subscript> nanoparticles

In this article, the photocatalytic reaction of aniline and 4-amino N, N dimethyl aniline with methanol, ethanol and isopropanol on anatase TiO₂ nano-particles under UV (365 nm wavelength) irradiation was examined. The concentration of unreacted aryl amines and products was measured by gas chromatography picks integration, and then the products were identified by mass spectroscopy analysis. By making a comparison within the rates of photocatalysis of each aryl amine in different alcohols under various irradiation times, it was revealed that, in all cases, the sequence of photocatalysis rate was methanol > ethanol > isopropanol. In reactions where the concentrations of aryl amine were lower than 10 mmol/L, imines were the main products and alkylation of amines was not observed. In the higher concentration of aryl amines, oxidation and dimerization occurred.     

Simultaneous reduction of nitro- to amino-group in the palladium-catalyzed Suzuki cross-coupling reaction

An efficient method for palladium-catalyzed Suzuki cross-coupling reaction with simultaneous reduction of nitro- to amino-group has been developed. This method allows nitro-substituted aryl halides to readily react with arylboronic acids, to afford aryl substituted aniline in low to excellent yields. The reaction was catalyzed by Pd(OAc)₂ (3 mol %) at 150 °C under atmospheric pressure in the presence of K₂CO₃ (3 equiv) in DMF/H₂O (5/1).     

Ligand-free, atom-efficient Suzuki-Miyaura type cross-coupling reactions at room temperature

The atom-efficient cross-coupling reaction of sodium tetraarylborates with aryl iodides and bromides was reported. The reaction can be performed directly using a catalytic system composed of palladium chloride, sodium carbonate and methanol (PdCl₂/Na₂CO₃/MeOH) under heat-free conditions at room temperature in an open air conditions. The reactions carried out in an atom-efficient way as 4 equiv of aryl halides coupled effectively with 1 equiv of sodium tetraarylborates to furnish 4 equiv of the corresponding functionalized biaryls in good to excellent yields.     

Rapid Microwave Induced Palladium Catalyzed Amination of Aryl Bromides

Summary.  The palladium-catalyzed coupling reaction of aryl bromides with various amines under microwave irradiation was studied using PdCl₂ [P(o-tolyl)₃]₂ which gave various aryl amines in good yields. The reactions were carried out under normal atmospheric conditions. Received September 3, 2001. Accepted October 10, 2001     

First use of a palladium complex with a thiosemicarbazone ligand as catalyst precursor for the Heck reaction

A novel palladium complex with salicylaldehyde N(4)-ethylthiosemicarbazone has been synthesized and according to its crystal structure the ligand is bound to the metal in an O, N, S-terdentate coordination mode. This phosphorus-free system efficiently catalyzes the Heck reaction of aryl bromides (from electron-rich to electron-poor) with styrene under argon, with turnover numbers of up to 43,000, at 150 °C after 24 h, and with a selectivity toward trans-stilbenes ranging from 92 to 96%. In air, for activated aryl bromides and for a palladium concentration of 1 mM, the yields are essentially the same as those obtained when the reaction was performed under argon.     

Fluorogenic derivatization of aryl halides based on the formation of biphenyl by Suzuki coupling reaction with phenylboronic acid

The fluorogenic derivatization method for aryl halide was developed for the first time. This method was based on the formation of fluorescent biphenyl structure by Suzuki coupling reaction between aryl halides and non-fluorescent phenylboronic acid (PBA). We measured the fluorescence spectra of the products obtained by the reaction of p-substituted aryl bromides (i.e., 4-bromobenzonitrile, 4-bromoanisole, 4-bromobenzoic acid ethyl ester and 4-bromotoluene) with PBA in the presence of palladium (II) acetate as a catalyst. The significant fluorescence at excitation maximum wavelength of 275–290 nm and emission maximum wavelength of 315–350 nm was detected in all the tested aryl bromides. This result demonstrated that non-fluorescent aryl bromides could be converted to the fluorescent biphenyl derivatives by the coupling reaction with non-fluorescent PBA. We tried to determine these aryl bromides by HPLC-fluorescence detection with pre-column derivatization. The aryl bromide derivatives were detected on the chromatogram within 30 min without any interfering peak derived from the reagent blank. The detection limits (S/N = 3) for aryl bromides were 13–157 fmol/injection.     

Study of CuI catalyzed coupling reactions of aryl bromides with imidazole and aliphatic amines under microwave dielectric heating

Amination of a variety of functionalized aryl bromides with imidazole and primary and secondary amines was accomplished using a CuI/amino acid catalyst system under microwave heating. Application of microwave irradiation shortened the reaction time from 25–40 h to 6–20 min. Good to very good yields of the corresponding coupling products were obtained when imidazole and secondary amines were used as starting materials. In case of primary amines, the outcome of the reaction was dependent on the character of the substituent on aryl bromide.     

Phosphine-free Pd-salen complexes as efficient and inexpensive catalysts for Heck and Suzuki reactions under aerobic conditions

Phosphine-free palladium-salen complexes, N,N′-bis(salicylidene)-ethylenediamino-palladium and N,N′-bis(salicylidene)-1,2-phenylenediamino palladium, are found to be highly active catalysts for the Heck olefination of aryl iodides and Suzuki reaction of aryl iodides and bromides giving excellent yields (70-90%) of products under aerobic conditions, in short reaction times (10-60 min).     

Indolylbenzimidazole‐based ligands catalyze the coupling of arylboronic acids with aryl halides

A novel class of compounds bearing indole and benzimidazole rings was designed and easily synthesized from 2‐indolecarboxylic acid and o‐phenylenediamine. The catalytic system derived from a 2‐indolylbenzimidazole‐based ligand and Pd(OAc)₂ in situ could lead to complete conversion of aryl bromides at 0.5 mol% Pd loading under mild reaction conditions. In the presence of a catalyst, sterically hindered biaryls were selectively generated in excellent yields by adjusting reaction parameters through the coupling of arylboronic acids with aryl halides. The efficiency of this reaction was demonstrated by its compatibility with various functional groups.     

Open air O-arylation reaction of phenols with aryl halides catalyzed by polymer-anchored copper(II) complexes

Two copper complexes were synthesized from macroporous chloromethylated polystyrene beads. The first one was prepared by sequential attachment of imidazole and copper acetate with chloromethylated polystyrene-divinyl benzene copolymer, and the second one was prepared from 4-vinylpyridine and copper acetate with chloromethylated polystyrene-divinyl benzene copolymer. These catalysts showed excellent catalytic activity in O-arylation reaction of aryl halides with phenol in dimethylsulfoxide using potassium carbonate at 130 °C under open air conditions to give diaryl ethers in high yields. Less reactive aryl bromides and aryl chlorides have also been shown to react with phenols to give good yields of the diaryl ethers. The effects of various parameters such as solvent, catalyst from different copper salt and base on the reaction system were studied. The reaction is applicable to a wide variety of substituted aryl halides and phenols with different steric and electronic properties. These catalysts were recovered by simple filtration, and the reusability experiments showed that these catalysts can be used five times without much loss in the catalytic activity.     

Synthesis of diarylmethane derivatives from Pd-catalyzed cross-coupling reactions of benzylic halides with arylboronic acids

A simple catalyst precursor prepared in situ from palladium acetate and triphenylphosphine shows high activity for the Suzuki cross-coupling reaction of benzylic bromides and chlorides with aryl boronic acids. The reaction can be carried out at low catalyst loading (0.002-1 mol%) and under mild conditions (room temperature to 80 °C) furnishing diarylmethane derivatives in high yields (86-99%).     

Simple and efficient copper-catalyzed S-arylation of diaryl disulfides with triarylbismuthanes under aerobic conditions

Novel and simple copper-catalyzed C(aryl)-S bond formation of diaryl disulfides with bismuth reagents is described. Reactions of diaryl disulfides with triarylbismuthanes in the presence of CuOAc (10 mol %) and 1,10-phenanthroline (10 mol %) under aerobic conditions led to the formation of unsymmetrical diaryl sulfides in satisfactory yields. The reaction is atom-economic and all three aryl groups of the triarylbismuthanes and both sulfanyl groups of the diaryl disulfides could be transferred to the coupling products.