Highly efficient, multigram and enantiopure synthesis of (S)-2-(2,4′-bithiazol-2-yl)pyrrolidine

(S)-2-(4-Bromo-2,4′-bithiazole)-1-(tert-butoxycarbonyl)pyrrolidine ((S)-1) was obtained as a single enantiomer and in high yield by means of a two-step modified Hantzsch thiazole synthesis reaction when bromoketone 3 and thioamide (S)-4 were used. Further conversion of (S)-1 into trimethyltin derivative (S)-2 broadens the scope for further cross-coupling reactions.     

Enantioselective alkylation and protonation of prochiral enolates in the asymmetric synthesis of β-amino acids

Achiral 1-benzoyl-3-methylperhydropyrimidin-4-one (1) was deemed a useful, potential precursor for the enantioselective synthesis of α-substituted β-amino acids. Pyrimidinone 1 was prepared from inexpensive β-aminopropanoic acid in 62% overall yield. Prochiral enolate derivative 1 -Li was alkylated in good yield and moderate enantioselectivity in the presence of chiral amines (S)-8, (S,S)-9, (S,S)-10, or (−)-sparteine. The enantioselectivity of the alkylation process is highest in toluene as the solvent and in the presence of lithium bromide as additive. The racemic alkylated derivatives 2 and 3 were readily metallated with LDA to give prochiral enolates 2-Li and 3-Li, that were reprotonated with novel chiral phenolic acids (S)-11, (S,S)-12, (S)-13, and (S,S)-14 in moderate enantioselectivity in the case of 2-Li and good enantioselectivity in the case of 3-Li. The acid (6N HCl) hydrolysis of enantioenriched 2 and 3 proceeded in good yield and without racemization to afford α-alkyl-β-amino acids 4 and 5, respectively.     

Salen-ligands based on a planar-chiral hydroxyferrocene moiety: Synthesis, coordination chemistry and use in asymmetric silylcyanation

Condensation of the O-protected hydroxyferrocene carbaldehyde (S_p)-1 with suitable diamines, followed by liberation of the hydroxyferrocene moiety leads to a new type of ferrocene-based salen ligands (3). While the use of ethylenediamine in the condensation reaction yields the planar-chiral ethylene-bridged ligand [(S_p,S_p)-3a], reaction with the enantiomers of trans-1,2-cyclohexylendiamine gives rise to the corresponding diastereomeric cyclohexylene-bridged systems [(S,S,S_p,S_p)-3b and (R,R,S_p,S_p)-3c], which feature a combination of a planar-chiral ferrocene unit with a centrochiral diamine backbone. Starting with the ferrocene-aldehyde derivative (R_p)-1, the enantiomeric ligand series (3d/e/f) is accessible via the same synthetic route.The (S_p)-series of these newly developed N₂O₂-type ligands was used for the construction of the corresponding mononuclear bis(isopropoxy)titanium (4a/b/c), methylaluminum (5a/b/c) and chloroaluminum-complexes (6a/b/c), which were isolated in good yields and identified by X-ray diffraction in several cases. The aluminum complexes (5/6) were successfully used in the Lewis-acid catalyzed addition of trimethylsilylcyanide to benzaldehyde, yielding the corresponding cyanohydrins in 45-62% enantiomeric excess.     

Synthesis of ‘thianthrene dimer’ by the coupling reaction of stannylthianthrenes in the presence of copper catalysts

The coupling reaction of 1-tributylstannylthianthrene (5) and 2-tributylstannylthianthrene (7) in the presence of copper catalysts at rt afforded the thianthrene dimer 1,1′-bithianthrene (3), 2,2′-bithianthrene (8), and 1,2′-dithianthrene (9) in high yields. Also we obtained thianthrene oxide dimer (R,R) (S,S)-1-(10-S-monoxythianthrene-1-yl)thianthrene-10-S-monoxide (12) and (R,S) (S,R)-1-(10-S-monoxythianthrene-1-yl)thianthrene-10-S-monoxide (13) from 1-tributylstannyl-10-S-monoxythianthrene (10) under the same reaction condition. The final structural conformation of 3, 8, 9, and 12 was performed by X-ray crystallographic analysis. Further, the solvent effects in the coupling reactions were also examined.     

An expedient synthesis of 7(S)-ethyl-8(R or S)-indolizidinols based on a thiophene reductive desulfurization

Chiral hexahydrothieno[2,3-f]indolizine-4,7-dione (S)-12 and the ancillary alcohol 13 were generated from thiophene-2-carboxaldehyde and (S)-glutamic acid in three and four steps, respectively, in good overall yields and both high enantio- and diastereomeric purities. Applying a thiophene reductive desulfurization, compound 12 was readily converted into 7(S)-ethyl-8(S)-indolizidinol 9. The 8(R)-epimer of 9 was advantageously obtained using the Mitsunobu alcohol inversion or, starting from 13, by chemical separation after O-benzylation and lactam reduction. During these studies, the reduction of regioisomers of 12 and 13, namely 17 and 18, was investigated and the results obtained are also discussed.     

Regioselective Baeyer-Villiger lactonization of 2-substituted pyrrolidin-4-one. Synthesis of statine

Nine 2-substituted pyrrolidin-4-ones 4a-i were obtained via a series of functional group transformation of known prolinol 5 by facile six kinds of methodologies. The target structure of 1,3-amino alcohols 2a-i was constructed in the regioselective Baeyer-Villiger lactonization of ketones 4a-i and reduction of the resulting 4-substituted tetrahydro-1,3-oxazin-6-ones 3a-i. A new and straightforward synthesis of (3S,4S)-statine (6) has been established starting from trans-(2S,4R)-4-hydroxyproline (1).     

Chemo- and diastereoselective control for a flexible approach to (5S,6S)-6-alkyl-5-benzyloxy-2-piperidinones

Chemo- and diastereoselective transformation of the N,O-acetals and their chain tautomers (4/5), readily derived from protected 3-hydroxyglutarimide 1a, was studied. It was uncovered that while the reaction with a combination of boron trifluoride etherate/zinc borohydride led to cyclic products (5S,6S/R)-6-alkyl-5-benzyloxy-2-piperidinones 3/2, and 6 in modest chemo- and diastereoselectivities, the reaction of 4/5 with zinc borohydride led exclusively to the formation of the ring-opening products 6 in excellent anti-diastereoselectivities. On the basis of the latter reaction, a flexible approach to (5S,6S)-6-alkyl-5-benzyloxy-2-piperidinones 3 was disclosed.     

Tulearins A, B, and C; structures and absolute configurations

The relative configuration of tulearin A (1) is determined by X-ray diffraction analysis of a cyclic carbonate derivative 2 and the absolute configuration (2R,3R,5S,8S,9S,15R,17S) from the 9-MTPA-esters 1R and 1S is determined using the modified Mosher’s method. A mechanism for the unexpected formation of carbonate 2 is suggested. Two N-phenyltriazolinedione derivatives 3 and 4 are also prepared. Two additional tulearins, B and C (5 and 6) are isolated in very small amounts and their structures are elucidated by spectroscopic means.     

Stereocontrolled conversion of some optically active (4S,5R)-dihydroisoxazoles into acyclic 3-acetamido-1,2-diols

Optically active (4S,5R)-dihydroisoxazoles 5a-c (90-91% ee) have been prepared by reaction of the epoxyketones 4a-c with hydroxylamine. Reduction of compounds 5a and 5b using lithium aluminium hydride took place exclusively from the Re face to give (1R,2S,3S)-1,3-disubstituted-3-aminopropane-1,2-diols 6a and 6b. These amino-diols were characterised by N-acetylation and the stereochemical sense of the hydride reduction was confirmed by conversion of amides 7a and 7b into α-amino acid derivatives 10a and 10b.     

Generation of allenylthioketene S,S-dioxides through [3,3] sigmatropic rearrangement of alkynyl propargyl sulfones

Thioketene S,S-dioxides 2 were successfully generated through [3,3] sigmatropic rearrangement of alkynyl propargyl sulfones 1 and the formation of 2 was confirmed by trapping experiment using cyclohexene or allyltrimethylsilane affording a [2+2] cycloadduct 5. In situ generated thioketene S,S-dioxides 2 underwent facile conversion into allenynes 3 in moderate yields, via formation and subsequent [1,2] shift of vinylidene carbenes.     

Synthesis and structural determination of the C33-C42 fragment of symbiodinolide

Symbiodinolide (1) is a polyol macrolide with a molecular weight of 2859 mu. As one of the degradation reactions, cross-metathesis of 2, which is a methyl ester of 1, with ethylene was performed to give the C33-C42 degraded fragment 4. The absolute configuration of 4 was estimated to be (36S,40S) by Mosher method. Stereoselective synthesis of 4 was achieved in 14 steps from l-aspartic acid. Synthetic bis-(S)- and (R)-MTPA esters exhibited the spectroscopic data identical with those of bis-(S)- and (R)-MTPA esters derived from the degraded fragment 4. Thus, the absolute stereochemistry of 4 was elucidated to be (36S,40S).     

Synthesis of (3′R,5′S)-3′-hydroxycotinine using 1,3-dipolar cycloaddition of a nitrone

To synthesize (3′R,5′S)-3′-hydroxycotinine [(+)-1], the main metabolite of nicotine (2), cycloaddition of C-(3-pyridyl)nitrones 3a, 3c, and 15 with (2R)- and (2S)-N-(acryloyl)bornane-10,2-sultam [(2R)- and (2S)-8] was examined. Among them, l-gulose-derived nitrone 15 underwent stereoselective cycloaddition with (2S)-8 to afford cycloadduct 16, which was elaborated to (+)-1.     

Synthesis of the spiroacetal fragment of broussonetine H

(2S,6S)-2-(3-Bromopropyl)-1,7-dioxaspiro[5.5]undecane 3 was prepared by the addition of the acetylide derived from (4S)-4-benzyloxy-7-tert-butyldiphenylsilyloxyhep-1-yne 8 to δ-valerolactone 6 followed by treatment with hydrogen and palladium on charcoal which effected hydrogenation of the alkyne, hydrogenolysis of the benzyl ether and subsequent spiroacetal formation. The (4S)-stereochemistry in acetylene 8 was established by addition of trimethylsilylacetylene 10 to (2S)-epoxide 9, which in turn is derived from l-glutamic acid 11.     

Studies on Wittig rearrangement of furfuryl ethers in steroidal side chain synthesis

Wittig rearrangement of 17(20)-ethylidene-16-furfuryloxy steroids 5-8 was examined. Reaction of 17E(20)-ethylidene-16α-furfuryloxy steroid 5 with t-BuLi in THF afforded (20S,22S)- and (20S,22R)-22-hydroxy steroids 9, 10 and 17Z(20)-ethylidene-16α-(2-furyl)hydroxymethyl steroid 11 in 61, 28, and 9% yields, respectively. Base treatment of 17E(20)-ethylidene-16β-furfuryloxy steroid 7 gave (20R,22R)-22-hydroxy steroid 13 and 17Z(20)-ethylidene-16β-(2-furyl) hydroxymethyl steroid 14 in 60 and 17% yields. In contrast, 17Z(20)-ethylidene-16-furfuryloxy steroids 6, 8 led to the corresponding 2,3-rearranged products in low yields (25% for (20R,22S)-22-hydroxy steroid 12; 31% for (20S,22R)-22-hydroxy steroid 10). Both (20S,22S)- and (20S,22R)-22-hydroxy steroids 9, 10 were converted by catalytic hydrogenation into known compounds 16, 17, key intermediates for the synthesis of biologically active steroids.     

Isolation and characterization of related impurities in 24-epibrassinolide

Two extra-hydroxylated analogs of 24-epibrassinolide (2), 17-hydroxy-24-epibrassinolide (4), 25-hydroxy-24-epibrassinolide (5), and two oxo-analogs of 24-epibrassinolide 22-oxo-23S-24-epibrassinolide (6), 22R-23-oxo-24-epibrassinolide (7) as impurities were isolated and identified from the initial material [purity: 2 and its 22S, 23S-isomer (3) >95%] by using various chromatographic methods and repeated crystallization. Among them, compound 4 and compound 6 were first reported. Their structures were established by spectrometric analysis and X-ray crystallography study. Formation of mixed crystals of 6 and 7 in the crystallization process was postulated and further confirmed.     

Synthesis, characterization and anticancer activity of new chiral Pd(II)-complexes derived from unsymmetrical α-diimine ligands

A set of new diastereopure unsymmetrical α-diimine ligands 2a-d derived from methylglyoxal and optically pure primary amines 1a-d afforded the new chiral Pd(II)-complexes (S,S)-3a, (S,S)-3b, (S,S)-3c, and (1S, 2S, 3S, 5R)-3d. All compounds have been characterized by IR, ¹H, and ¹³C NMR spectroscopies along with MS-FAB⁺ spectrometry. The crystal and molecular structure for the complexes 3a, 3b and 3d have been fully confirmed by single-crystal X-ray studies. Likewise, complexes 3a-d have also been screened for their in vitro cytotoxicity against different classes of cancer: leukemia (K-562 CML), colon cancer (HCT-15), human breast adenocarcinoma (MCF-7), central nervous system (U-251 Glio) and prostate cancer (PC-3) cell lines.     

Corrigendum to “Enantioselective alkylation and protonation of prochiral enolates in the asymmetric synthesis of β-amino acids” [Tetrahedron 59 (2003) 4223]

This paper describes work that corrects the synthetic procedures reported in the title paper for the preparation of novel chiral phenolic acids (S)-11, (S)-13, (S,S)-12 and (S,S)-14. Unlike the results provided in the article being reexamined, protonation of prochiral enolates 2-Li and 3-Li with chiral Brønsted acids 11-14 proceeded with negligible enantioselectivity.     

Highly efficient synthesis of phenanthroquinolizidine alkaloids via Parham-type cycliacylation

A concise and efficient route involving Parham-type cycliacylation as the key step has been used to synthesize phenanthroquinolizidine alkaloids 1a-c and 2a-c. Among the products, 1b-(S), 1b-(R), 2a-(14aS,15S), 2a-(14aR,15R), and 2b were synthesized for the first time.     

Synthesis and evaluation of new chiral diols based on the dicyclopentadiene skeleton

The resolution by Lipase PS of rac-5 (from reduction of ketone 6, obtained from dicyclopentadiene with a new environment-friendly synthesis) gives (2S)-5, which was further reduced to the endo(2R)-1a alcohol. The endo(2S)-1b alcohol was obtained from camphor with a multistep synthesis. Pinacol couplings of 3a,b, carried out with Mg/Hg or Corey's general procedure respectively, afforded with high diastereoselectivity the C₂ symmetry diols (2R,2′R)-2a and (2S,2′S)-2b, with endo oriented OH functions. The enantiogenic power of the endo alcohol (2R)-1a and (2S)-1b and of the diols (2R,2′R)-2a and (2S,2′S)-2b was tested towards the LiAlH₄ reduction of acetophenone. The C₂ symmetry appears to play a fundamental role.     

Synthetic study toward 17-thiasteroids: synthesis of the 1-thiahydrinden-5-one subunit using a new annulation procedure and investigation of its reduction

The enantioselective syntheses of ketones 6 and 7 featuring the CD subunit of 17-thiasteroid are described. The key bicyclic 1-thiahydrindenone (S)-5 was assembled in three steps from Michael adduct (S)-12 via β-keto ester 15 using a one-pot sequential process involving cleavage of both the ketal group and the tert-butyl ester group, decarboxylation, and finally intramolecular aldol condensation. Hydridoalkyl cuprate-induced conjugate reduction of 1-thiahydrindenone (S)-5 and its corresponding sulfone (S)-23 gave 1-thiahydrindanones 6 and 7, respectively, which display unexpectedly the unnatural cis-ring junctions.