An efficient tris-(2-aminoethyl)amine-CuI-catalyzed thioetherification of thiols with aryl halides

A robust method has been developed to couple a wide variety of thiols and aryl halides. The C-S bond forming reaction makes use of catalytic copper(I) iodide and the ligand tris-(2-aminoethyl)amine. These conditions tolerate a wide degree of functionality on both aryl halide and thiol reactants and have resulted in numerous examples being synthesized. Commercial availability of the ready to use, inexpensive ligand, tris-(2-aminoethyl)amine and air-stable CuI make the method well suited to generate a diverse array of diaryl thioethers.     

Catechol violet as new, efficient, and versatile ligand for Cu(I)-catalyzed C-S coupling reactions

Combination of CuI and Catechol violet (CuI-CV) was employed as catalyst for the first time in the C-S coupling reaction of a wide variety of aromatic halides, such as aryl iodides, bromo pyridines, activated aryl chlorides, and vinyl iodide with thiols to afford the corresponding thioethers in good to excellent yields. Broad range of functional group tolerance present in both the coupling partners has been observed in this reaction protocol.     

Synthesis,crystal structure and properties of a novel copper(II) complex with tripod ligand tris(1H-benzimidazol- 2-ylmethyl)amine

A five-coordinate copper complex with the tripod ligand tris(1H-benzimidazol-2-ylmethyl)amine (ntb), of composition [Cu(ntb)(H₂O)] (C1O₄)₂?·?C₅H₄N₂O₃?·?H₂O (C₅H₄N₂O₃?=?4-nitropyridine-N-oxide), was synthesized and characterized by means of elemental analyses, electrical conductivities, thermal analyses, IR, and U.V. The crystal structure of the copper complex has been determined by single-crystal X-ray diffraction, and shows that the Cu^II is bonded to a tris(1H-benzimidazol-2-ylmethyl)amine (ntb) ligand and a water molecule through four N atoms and one O atom, giving a distorted trigonal–bipyramidal coordination geometry with approximate C ₃ molecular symmetry. Cyclic voltammograms of the copper complex indicate a quasi-reversible Cu⁺²/Cu⁺ couple. Electron spin resonance data confirm a trigonal-bipyramidal structure and with g ₂?<?g _ζ and a very small value of A ₂ (20?×?10^?4?cm^?1).     

以三(2-氨基乙基)胺为核的PAMAM与Zn2+的络合作用研究

以三(2-氨基乙基)胺为核,通过发散法合成了不同代数的树状聚酰胺胺(PAMAM),并利用FT-IR、1H NMR等技术对合成的产物进行表征,结果表明所合成产物的分子结构与理论结构相符。合成的PAM-AM具有大量的伯胺、叔胺和酰胺,可以作为Zn2+的络合剂。采用荧光分光光度法研究了PAMAM与Zn2+的络合作用,探讨了PAMAM的代数、Zn2+与PAMAM的摩尔比、溶液pH值、反应时间和温度对络合的影响。结果表明PAMAM的代数越高,所络合的Zn2+数目越多,且与理论值相符;随着Zn2+与PAMAM摩尔比的增加,络合形式发生变化;溶液pH值对络合体系有显著影响,强酸性条件下,PAMAM的伯胺和叔胺被质子化,H+取代Zn2+,Zn2+从络合体系中释放出来,这为PAMAM的循环利用提供了理论依据;另外,反应时间和温度对PAMAM与Zn2+的络合也有一定影响,延长反应时间和升高反应温度均使络合程度增加。     

Synthesis and Crystal Structure of a [Cu(HTren)Cl_2]ClO_4·H_2O Complex (Tren = Tris(2-aminoethyl)amine)

1INTRODUCTION Investigation of the coordination chemistry of copper(II)continues to be stimulated by interest in developing modes for copper proteins and in under-standing the factors which give rise to the seemingly infinite variety of distortions from regular stereo-chemistry observed in Cu(II)complexes[1,2].For more than decades,due to the unique coordination polyhedra and their easy preparation,tripodal copper complexes have attracted much attention in addition to their special chemi…     

A beta-keto ester as a novel, efficient, and versatile ligand for copper(I)-catalyzed C-N, C-O, and C-S coupling reactions

Employing ethyl 2-oxocyclohexanecarboxylate as a novel, efficient, and versatile ligand, the copper-catalyzed coupling reactions of various N/O/S nucleophilic reagents with aryl halides could be successfully carried out under mild conditions. A variety of products including N-arylamides, N-arylimidazoles, aryl ethers, and aryl thioethers were synthesized in good to excellent yields.     

Synthesis,crystal structure and properties of a copper(II) complex with the tripod ligand tris ( N -methylbenzimidazol-2-ylmethyl)amine and 4-hydroxycinnamate

A five-coordinate copper complex with the tripod ligand tris(N-methylbenzimidazol-2-ylmethyl)amine (Mentb) and 4-hydroxycinnamate, with the composition [Cu(Mentb)(4-hydroxycinnamate)](ClO₄)?·?0.5DMF, was synthesized and characterized by means of elemental analyses, electrical conductivities, thermal analyses, IR, and UV. The crystal structure of the copper complex has been determined by single-crystal X-ray diffraction, and shows that the Cu^II atom is bonded to a tris(N-methylbenzimidazol-2-ylmethyl)amine (Mentb) ligand and a 4-hydroxycinnamate through four N atoms and one O atom, giving a distorted trigonal-bipyramidal coordination geometry (τ?=?0.78), with approximate C₃ molecular symmetry. Cyclic voltammograms of the copper complex indicate a quasireversible Cu⁺²/Cu⁺ couple. Electron spin resonance data confirm the trigonal–bipyramidal structure and indicate g _∥?<?g _⊥ with a very small value of A _∥ (57?×?10^?4?cm^?1).     

Encapsulating ruthenium and osmium with tris(2-aminoethyl)amine based tripodal ligands

The reaction of a series of tripodal ligands, H₃L^1,2 and L^3-6, with [M(PPh₃)₂Cl₂] (M = Ru, Os) affords a family of coordination cage compounds of the type [M^IIIL^1,2] (1-4) or [M^IIL^3-6](BPh₄)₂ (5-12). The Schiff base ligands (H₃L¹, L³, L⁵) have been synthesized by condensation of tris(2-aminoethyl)amine with salicylaldehyde, pyridine-2-aldehyde and 1-methyl-2-imidazolecarboxaldehyde. These ligands were further reduced and subsequently methylated to form the new ligands (H₃L², L⁴, L⁶). Single crystal X-ray diffraction studies of 1 and 2 show that the tripodal ligand wraps around the metal center as a hexadentate ligand to form a cage. All the synthesized compounds have been thoroughly characterized by ESI-MS, FT-IR, UV-Vis and NMR spectroscopic methods. To the best of our knowledge, this is the first ever report of osmium complexes with tris(2-aminoethyl)amine based tripodal ligands. DFT calculations were performed to obtain geometry optimized structures of all the other complexes (3-12).     

Synthesis and crystal structure of a copper(II) complex of the tripodal tetradentate ligand tris(2-benzimidazolylmethyl)amine

A mononuclear copper complex [Cu(NTB)Cl]Cl·3CH₃CH₂OH (1) (NTB?=?tris(2-benzimidazolylmethyl)amine) was synthesized and its structure was determined by single crystal X-ray diffraction. In this complex, copper(II) is five-coordinate with NTB serving as a neutral tetradentate ligand. Three tertiary nitrogen atoms of benzimidazole groups of NTB formed the base of the trigonal bipyramidal geometry. One axial position was occupied by the apical nitrogen atom of NTB and the other was occupied by chloride. The ESR spectrum of complex 1 in ethanol at 101?K was recorded and the well-defined ESR parameters (g _∥?=?2.02, g _⊥ =?2.16 and A _∥ ^?=?109?G) indicated that the Cu(II) has a distorted trigonal-bipyramidal environment, in good agreement with crystal structure determination for complex 1.     

Structures of Mn(II) complexes of bis(2-pyridylmethyl)amine (bpa) and (2-pyridylmethyl)(6-methyl-2-pyridylmethyl)amine (Mebpa): geometric isomerism in the solid state

The crystal structures of [Mn(bpa)₂](ClO₄)₂ (1), [bpa?=?bis(2-pyridylmethyl)amine], and Mn(6-Mebpa)₂(ClO₄)₂ (2), [6-Mebpa?=?(6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine] have been determined. In 1, two facial [Mn(bpa)₂]²⁺ isomers are observed in the same unit cell, one with C _i (1a) and the other with C₂ (1b) symmetries. In 2, only the isomer with C₂ symmetry is observed. The structure of [Mn(bpa)₂]²⁺ with only C₂ symmetry has been reported previously (Inorg. Chem., 31, 4611 (1992)). The bond length order Mn–N_amine?>?Mn–N_pyridyl, observed in the C₂ and the C _i isomers in the crystals of 1, is the reverse of the order observed in the structure of [Mn(bpa)₂](ClO₄)₂ which contains only the C₂ isomer in the unit cell. The structure of 2 in which only the C₂ isomer is found, also shows the bond length order Mn–N_pyridyl?>?Mn–N_amine. In cyclic voltammetric experiments in acetonitrile solutions, 1 and 2 show irreversible anodic peaks at E _p?=?1.60 and 1.90?V respectively, (vs. Ag/AgCl), assigned to the oxidation of Mn(II) to Mn(III). The substantially higher oxidation potential of 2 is attributable to a higher rearrangement energy in complex 2 due to the steric effect of the methyl substituent.     

Synthesis and structural characterisation of cobalt(II) and iron(II) chloride complexes containing bis(2-pyridylmethyl)amine and tris(2-pyridylmethyl)amine ligands

Treatment of (2-C₅H₄N)CH_{2 3}N (TPA) with one equivalent of MCl₂ in n-BuOH at elevated temperatures affords the six-coordinate complexes [(TPA)MCl₂] (M = Co (1), Fe (2)) and, in the case of CoCl₂, the five-coordinate chloride salt [(TPA)CoCl]Cl (3). Conversely, addition of an excess of CoCl₂ in the latter reaction leads to [(TPA)CoCl]₂[CoCl₄] (4) as the only isolable product. Interaction of one equivalent of (2-C₅H₄N)CH_{2 2}NH (DPA) and MCl₂ under similar reaction conditions to that described above affords the dimeric species [(fac-DPA)MCl(μ-Cl)]₂ (M = Co (5), Fe (6)), while the bis(ligand) halide salts [(fac-DPA)₂M]Cl₂ (M = Co (7), Fe (8)) are accessible on addition of two equivalents of DPA. In the presence of air, 6 undergoes oxidation to give [ (fac-DPA)FeCl_{2 2}(μ-O)] (9). Single-crystal X-ray diffraction studies are reported for 1, 2 · MeCN, 3, , 7 · 3MeCN, 8 · 3MeCN and 9.     

A five-coordinate copper(II) perchlorate complex with tris(N-methylbenzimidazol-2-ylmethyl)amine and salicylate

A five-coordinate copper(II) complex with the tripod ligand tris(N-methylbenzimidazol-2-ylmethyl)amine (Mentb) and salicylate, with the composition [Cu(Mentb) (salicylate)](ClO₄) · 2DMF, was synthesized and characterized by elemental and thermal analyses, electrical conductivity, IR and UV-Vis spectral measurements. The crystal structure of the complex has been determined by single-crystal X-ray diffraction. The Cu(II) is five-coordinate with four N atoms from the Mentb ligand and an O atom of the monodentate salicylate ligand. The N₄O donors are in a distorted trigonal-bipyramid geometry. Cyclic voltammograms indicate a quasireversible Cu²⁺/Cu⁺ couple. The X-band EPR spectrum of the complex confirms the trigonal-bipyramidal structure with g_∥ < g _⊥ and a very small value of A_∥ (41 × 10^?4 cm^?1).     

Tris(4-hydroxy-3,5-diisopropylbenzyl)amine as a new bridging ligand for novel trinuclear titanium complexes

Tris(4-hydroxy-3,5-diisopropylbenzyl)amine (LH₃) was synthesized by the reaction of 2,6-diisopropylphenol and hexamethylenetetramine in the presence of p-toluenesulfonic acid or paraformaldehyde. Its solid state structure was determined by single crystal X-ray diffraction. Its fully deprotonated specie, (4-O-3,5-i-Pr₂PhCH₂)₃N (L), was used to form novel trinuclear half-sandwich titanocene complexes, namely [(η⁵-C₅Me₅)TiCl₂]₃L (1) and [(η⁵-C₅Me₅)Ti(OMe)₂]₃L (2), which were then tested for the syndiospecific polymerization of styrene in the presence of methylaluminoxane (MAO) cocatalyst. Their catalytic properties were directly compared with those of trichloro(pentamethylcyclopentadienyl)titanium(IV) (3) and dichloro(2,6-diisopropylphenolato)(pentamethylcyclopentadienyl)titanium(IV) (4). 1/MAO and 2/MAO systems showed higher activities towards styrene polymerization than the mononuclear catalytic systems 3/MAO and 4/MAO, giving syndiotactic polystyrene of high molecular weight.     

Tetramethylguanidino‐tris(2‐aminoethyl)amine: A novel ligand for copper‐based atom transfer radical polymerization

With CuBr/tetramethylguanidino‐tris(2‐aminoethyl)amine (TMG₃‐TREN) as the catalyst, the atom transfer radical polymerization (ATRP) of methyl methacrylate, n‐butyl acrylate, styrene, and acrylonitrile was conducted. The catalyst concentration of 0.5 equiv with respect to the initiator was enough to prepare well‐defined poly(methyl methacrylate) in bulk from methyl methacrylate monomer. For ATRP of n‐butyl acrylate, the catalyst behaved in a manner similar to that reported for CuBr/tris[2‐(dimethylamino)ethyl]amine. A minimum of 0.05 equiv of the catalyst with respect to the initiator was required to synthesize the homopolymer of the desired molecular weight and low polydispersity at the ambient temperature. In the case of styrene, ATRP with this catalyst occurred only when a 1:1 catalyst/initiator ratio was used in the presence of Cu(0) in ethylene carbonate. The polymerization of acrylonitrile with CuBr/TMG₃‐TREN was conducted successfully with a catalyst concentration of 50% with respect to the initiator in ethylene carbonate. End‐group analysis for the determination of the high degree of functionality of the homopolymers synthesized by the new catalyst was determined by NMR spectroscopy. The isotactic parameter calculated for each system indicated that the homopolymers were predominantly syndiotactic, signifying that the tacticity remained the same, as already reported for ATRP. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5906–5922, 2005     

Synthesis,structure, and DNA-binding properties of manganese(II) and nickel(II) complexes with tris(N-ethylbenzimidazol-2-ylmethyl)amine ligand

Tris(N-ethylbenzimidazol-2-ylmethyl)amine (Etntb), [Mn(Etntb)(DMF)(H₂O)](pic)₂ (1), and [Ni(Etntb)(DMF)(H₂O)](pic)₂ (2) (pic?=?picrate) have been synthesized and characterized by elemental analyses, molar conductivities, UV–Visible spectra, and IR spectra. Single-crystal X-ray diffraction revealed that the complexes have the same arrangement with distorted octahedral coordination geometries. DNA-binding properties of the free ligand, 1, and 2 have been investigated by electronic absorption, fluorescence, and viscosity measurements. The results suggest that the ligand and its complexes bind DNA via intercalation, and their binding affinity for DNA follows the order 2?>?1?> ligand.     

Kinetic study of CO2 absorption in aqueous solutions of 2-((2-aminoethyl)amino)-ethanol using a stirred cell reaction calorimeter

In the literature, aqueous 2-((2-aminoethyl)amino) ethanol (AEEA) is identified as a promising solvent for postcombustion CO₂ capture. In this work, the kinetics of CO₂ absorption in the aqueous AEEA, containing a primary and a secondary amino group, is studied over a wide temperature range of 303.15-343.15 K and the amine concentration in the range of 0.47-2.89 M using the fall-in-pressure technique in a stirred cell reaction calorimeter setup with a horizontal gas-liquid interface. The overall rate constants for (AEEA + H₂O + CO₂) reaction system are estimated in the pseudo–first-order reaction regime. The kinetic models based on zwitterion and the termolecular reaction mechanisms are used to predict kinetic rate constants. The experimental kinetic data are better correlated using the zwitterion mechanism (AAD 9.18%) than that of the termolecular mechanism (AAD 10.4%). The density, viscosity, and physical solubility of pure components and aqueous binary mixtures of AEEA are also measured at the similar temperature and concentration ranges of rate kinetics. Empirical models are proposed to predict pure component density and viscosity data with AAD of 0.02% and 7.17%, respectively. The Redlich-Kister model, the Grunberg-Nissan model, and the O'Connell's model are used to correlate experimental density, viscosity, and physical solubility data of the binary mixtures with AAD of 0.034%, 4.92%, and 6.5%, respectively. The reaction activation energy (E_a ∼ 32 kJ/mol) of the (AEEA + H₂O + CO₂) system is calculated from the Arrhenius power-law model using the zwitterion mechanism, which indicates lower energy barrier than that of the reported value for monoethanolamine (∼44 kJ/mol) in the literature.     

Synthesis,crystal structure,and properties of a seven-coordinate manganese(II) complex formed with the tripodal tetradentate ligand tris (N -methylbenzimidazol-2-ylmethyl)amine and salicylate

A seven-coordinate manganese(II) complex with the tripod tetradentate ligand tris(N-methylbenzimidazol-2-ylmethyl)amine (Mentb), [Mn(Mentb)(salicylate)(DMF)](ClO₄) ? (DMF), was synthesized and characterized by elemental, electrical conductivity, infrared, and UV-Vis spectral measurements. The crystal structure of the complex has been determined by single-crystal X-ray diffraction. Mn^II is bonded to a Mentb, a salicylate and dimethylformamide through four nitrogens and three oxygens, resulting in seven-coordination. Cyclic voltammograms of the complex indicate a quasi-reversible Mn³⁺/Mn²⁺ couple. The X-band electron paramagnetic resonance spectrum exhibits a six-line manganese hyperfine pattern with g = 2, A = 93, confirming that the material is high-spin Mn(II).     

Exploratory study of the reaction of bis(2-methoxyethyl)aminosulfur trifluoride (Deoxofluor™ reagent) with diaryl sulfoxides: novel routes to Ar2SF2 and Ar2SF(OTf) via sulfoxide activation

Neither bis(2-methoxyethyl)aminosulfur trifluoride (Deoxofluor™ reagent) nor HF/pyridine alone can fluorinate diaryl sulfoxides. S-fluorination can be effected by activating the sulfoxide via protonation with HF/pyridine (70:30) to form sulfoxonium ions in equilibrium which are then S-fluorinated in situ with Deoxofluor™ to give Ar₂SF₂ compounds. Conversions depend strongly on steric factors and the reactions require the use of excess Deoxofluor™ and HF/pyridine. NMR data for the resulting diarylsulfur difluorides are gathered and discussed. Sulfoxide activation via diaryl (trifloxy) sulfonium triflate generated in situ from Ar₂SO with triflic anhydride at low temperature represents another strategy for S-fluorination with Deoxofluor™ to generate Ar₂S(OTf)F.     

A highly diastereo- and enantioselective copper(I)-catalyzed Henry reaction using a bis(sulfonamide)-diamine ligand

A series of bis(sulfonamide)-diamine (BSDA) ligands were synthesized from commercially available chiral α-amino alcohols and diamines. The chiral BSDA ligand 3a, coordinated with Cu(I), catalyzes the enantioselective Henry reaction with excellent enantioselectivity (up to 99%). Moreover, with the assistance of pyridine, a CuBr-3a system promotes the diastereoselective Henry reaction with various aldehyde substrates and gives the corresponding syn-selective adduct with up to a 99% yield and 32.3:1 syn/anti selectivity. The enantiomeric excess of the syn adduct was 97%.