Preparation of MBHA resin by benzotriazole-mediated amidoalkylation

MBHA (4-methylbenzhydrylamine) resin is widely used as a solid support for the synthesis of carboxamides or peptide C-terminal amides. Herein, we report a new method for synthesizing MBHA resin by benzotriazole-mediated amidoalkylation. MBHA resin was efficiently prepared with N-[(benzotriazol-1-yl)(p-tolyl)methyl]formamide or N-[formamido(p-tolyl)methyl]formamide, and it showed excellent properties as a solid support.     

Polystyrene resins cross-linked with di- or tri(ethylene glycol) dimethacrylates as supports for solid-phase peptide synthesis

Polystyrene resins cross-linked with di(ethylene glycol) dimethacrylate (DEGDMA) and tri(ethylene glycol) dimethacrylate (TEGDMA), DEGDMA-PS and TEGDMA-PS, were synthesized by suspension copolymerization. Four functionalized resins, chloromethyl resin, 4-hydroxymethylphenoxymethyl resin (Wang resin), 4-methylbenzhydrylamine resin (MBHA resin) and 2-chlorotrityl chloride resin, were prepared from DEGDMA-PS and TEGDMA-PS. DEGDMA-PS and TEGDMA-PS showed high reactivity in the functionalization reactions in comparison with Merrifield resin (polystyrene cross-linked with divinylbenzene, DVB-PS). DEGDMA-PS-Wang resin and TEGDMA-PS-Wang resin were used as the solid-phase support for the synthesis of a difficult sequence, the fragment of acyl carrier protein 65-74. The yields of the crude peptide synthesized using DEGDMA-PS-Wang resin, TEGDMA-PS-Wang resin and DVB-PS-Wang resin were 92.3%, 91.6% and 78.8%, respectively. The purities of the crude peptides were 85.7%, 88.1% and 73.3%, respectively.     

A new strategy to produce beta-peptides: use of alicyclic beta-lactams

On p-methylbenzhydrylamine (MBHA) resin, by means of t-Boc chemistry, several tetrapeptides (H-Ala-ACXC-Ala-Gly-NH(2)) containing cyclic beta-amino acid units were prepared. These units were introduced into the growing peptide chain by using Boc-protected beta-lactams with KCN as catalyst in DMF. The method was applicable for both racemic and enantiomeric beta-lactams.     

酸敏性PEG载体的合成及其在多肽合成中的应用

本文通过聚苯乙烯固载聚乙二醇氨基树脂与羟甲基苯氧乙酸缩合制备了具有酸敏手臂结构的对羟甲基苯氧乙酰胺ＰＥＧ树脂。在合成中改进了ＰＳ－ＰＥＧＮＨ２树脂的制备方法,提高了树脂上功能基的转化率,不必进行封闭剩余活性基的操作,就得到具有单一功能基的树脂。     

Facile synthesis of C-terminal peptide hydrazide and thioester of NY-ESO-1 (A39-A68) from an Fmoc-hydrazine 2-chlorotrityl chloride resin

The NY-ESO-1 (A39-A68) peptide hydrazide was prepared through 9-fluorenyl-methoxycarbonyl solid-phase peptide synthesis (Fmoc SPPS) from a new 9-fluorenyl-methoxycarbonyl hydrazine 2-chlorotrityl chloride (Fmoc-hydrazine 2CTC) resin. The new resin was ideal for long-term storage and usage in Fmoc SPPS. Besides, the title peptide hydrazide could be transformed nearly quantitatively into the corresponding peptide thioester, which was both isolable and usable directly in native chemical ligation (NCL).     

A traceless approach for the parallel solid-phase synthesis of 2-(arylamino)quinazolinones

A traceless approach for the parallel solid-phase synthesis of 2-arylamino-substituted quinazolinones is described. Acylation of MBHA resin with o-nitrobenzoic acid derivatives, followed by reduction of the nitro group with tin chloride, generated a resin-bound o-anilino derivative. Reaction of resin-bound o-anilino derivative with arylisothiocyanates yielded resin-bound thioureas, which reacted with amines in the present of Mukaiyama's reagent (2-chloro-1-methylpyridinium iodide) to afford resin-bound guanidines. Following intramolecular cyclization of the resin-bound guanidines during cleavage from the resin by HF/anisole (95/5) for 1.5 h at 0 degrees C, the desired products were obtained in good yield and purity.     

Rink Amide树脂结构对多肽合成的影响研究

研究了Rink Amide树脂取代度、溶胀度及肽链的长度不同对肽合成收率的影响,并对影响Rink Amide树脂溶胀度的因素进行了研究,结果表明,合成长肽时低取代度、高溶胀度的Rink Amide树脂能获得较好的肽收率。     

PEG grafted AM SURE™ resin and its application to solid-phase peptide synthesis

PEGylated core-shell type resin (PEG-AM SURE) was developed by modifying the surface of AM SURE™ resin with diamino PEG. The conditions for the PEG coupling reaction were optimized by adjusting PEG chain cross-linking and the amount of free amino groups to ensure a enough loading level of functional groups on the resin (>0.30-0.39 mmol NH₂/g). The resulting PEG-AM SURE resin showed better performance than conventional resins during solid-phase peptide synthesis of JR10-mer and β2m_58-69 12-mer.     

Tetraethyleneglycol diacrylate (TTEGDA)-crosslinked polystyrene resin as an efficient solid support for gel phase peptide synthesis

Various applications of the newly developed tetraethyleneglycol diacrylate (TTEGDA)-crosslinked polystyrene resin are illustrated by the synthesis of model peptides, fully protected peptides, peptide amides and biologically important sequences. PS-TTEGDA resin was prepared by suspension polymerization of styrene and TTEGDA and functionalized with chloromethyl, 4-cholromethyl-3-nitro, aminomethyl, α-bromopropionyl, a-aminopropionyl, 4-bromomethyl 3-nitrobenzamido, 4-aminomethyl-3-nitrobenzamido groups. Peptide synthesis was carried out using these modified resins by standard solid phase methodology. Coupling and deprotection in this synthetic strategy went to near completion showing the positive role of hydrophilic and flexible crosslinking agent TTEGDA in facilitating gelphase reactions. The peptides were removed from the support by photolysis, trifluoroaceticacid (TFA) treatment,trans-esterification or ammonolysis in high purity and yield. The crude peptides were purified by column chromatography/FPLC and characterized by aminoacid analysis, sequencing or¹H-NMR.     

Concise Synthesis of Sibrafiban and Lamifiban,Two Non‐Peptide Fibrinogen Receptor (GPIIb/IIIa) Antagonists

The total synthesis of the non‐peptide fibrinogen receptor antagonists, sibrafiban ( 1 ) (Ro 48–3657) and lamifiban ( 2 ) (Ro 44–9883), is described. Both contain 4‐hydroxypiperidine unit and the same solid‐phase synthesis method was used as a key step. Connection of a secondary alcohol to the DHP‐resin, followed by iterative saponification and coupling sequences, provided novel drugs.     

Ionic liquid incorporated polystyrene resin for solid-phase peptide synthesis

Ionic liquid (IL) resins with an ionic liquid environment on solid support were prepared by immobilizing ionic liquid spacers on polystyrene (PS) resin. The properties of IL resins were dramatically changed as the anions of IL were exchanged. The performance of IL resins for solid-phase peptide synthesis (SPPS) was evaluated by measuring coupling kinetics of the first amino acid and synthesizing several peptides on IL resins.     

Synthesis of cyclo-PLAI using a combination of solid- and solution-phase methods

Cyclo-PLAI was successfully synthesized using a combination of solid- and solution-phase methods. This current synthesis was found to be faster than the previously reported synthesis for the cyclic peptide. The linear precursor was synthesized on 2-chlorotrityl resin with Fmoc/t-Bu strategy. HATU/HOAt was employed as the coupling reagent in the amide bond formation on the resin. Cyclization of the linear precursor was experimented with HATU/HOAt reagents with different conditions. However, the linear precursor was best cyclized using HATU reagent in DIPEA by stirring the reaction mixture at 0?°C for 1?h and followed by stirring the reaction mixture at room temperature for 30?min, giving the cyclic product in 70% yield (calculated from the linear peptide). Both linear and cyclic products were characterized using HR-TOF-ESMS, ¹H-NMR, ¹³C-NMR, and compared with previously reported spectral data for the cyclic product.     

Synthesis of cyclic peptides through hydroxyl side-chain anchoring

A general method was developed for the synthesis of serine or threonine containing cyclic peptides utilizing the β-hydroxyl side-chain of these residues as an anchor point to Wang resin. The peptide chain was assembled by conventional Fmoc/tBu solid-phase chemistry followed by palladium catalyzed exposure of the allyl protected C-terminus group and on-resin cyclization. The cyclic heptapeptide stylostatin 1 was prepared to demonstrate the utility of this technique.     

Efficient solid-phase synthesis of 1,3,5-trisubstituted 1,3,5-triazine-2,4,6-triones

The solid-phase synthesis of 1,3-disubstituted and 1,3,5-trisubstituted 1,3,5-triazine-2,4,6-triones from MBHA and Wang resin is described. Reaction of resin-bound amino acids with isocyanates yield resin-bound ureas, which further react with chlorocarbonyl isocyanate in toluene at 65 degrees C to selectively afford the resin-bound 1,3-disubstituted 1,3,5-triazine-2,4,6-triones. Selective alkylation at the N-5 position of the resin-bound 1,3-disubstituted 1,3,5-triazine-2,4,6-triones was accomplished by treatment with alkyl halides in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU). The desired products were cleaved from their solid support and obtained in good yield and purity. The method can be employed in production of toltrazuril analogue libraries for identification of new anticoccidial agents.     

Machine-Driven Chemoenzymatic Synthesis of Glycopeptide

Historically, researchers have put considerable effort into developing automation systems to prepare natural biopolymers such as peptides and oligonucleotides. The availability of such mature systems has significantly advanced the development of natural science. Over the past twenty years, breakthroughs in automated synthesis of oligosaccharides have also been achieved. A machine-driven platform for glycopeptide synthesis by a reconstructed peptide synthesizer is described. The designed platform is based on the use of an amine-functionalized silica resin to facilitate the chemical synthesis of peptides in organic solvent as well as the enzymatic synthesis of glycan epitopes in the aqueous phase in a single reaction vessel. Both syntheses were performed by a peptide synthesizer in a semiautomated manner.     

胡蜂蜂毒肽的固相合成

采用Fmoc固相合成策略,合成了胡蜂蜂毒肽(COOH-Ile-Asn-Leu-Lys-Ala-Leu-Ala-Ala-Leu-Ala-Lys-Lys-Ile-Leu-NH₂)。以Wang树脂为载体,HBTU-HOBt为缩合剂,按照其氨基酸序列依次缩合,最终用切割试剂将其从树脂上切割下来,得到粗肽,经RP-HPLC纯化得到目标肽,纯度97.6%。经HR-MS（EI）分析,确定产物为胡蜂蜂毒肽。     

A new method for the preparation of 2-chlorotrityl resin and its application to solid-phase peptide synthesis

2-Chlorotritylchloride (2-CTC) resin was prepared efficiently from 1% DVB-crosslinked polystyrene resin and 1-chloro-2-(dichloro(phenyl)methyl)benzene, which was easily obtained from 2-chlorobenzophenone. This 2-CTC resin showed excellent properties as a support for solid-phase peptide synthesis. Four peptide fragments were obtained in high purity using the resin.     

Application of HR‐MAS NMR in the solid‐phase synthesis of a glycopeptide using Sieber amide resin

The solid‐phase synthesis (SPS) of a structurally complex glycopeptide, using Sieber amide resin, was monitored by high resolution magic angle spinning NMR, demonstrating the further application of this technique. A synthetic peptidoglycan derivative, a precursor of a biologically active PGN, known to be involved in the cellular recognition, was prepared by SPS. The synthesis involved the preparation of an N‐alloc glucosamine moiety and the synthesis of a simple amino acid sequence L ‐Ala‐D ‐Glu‐L ‐Lys‐D ‐Ala‐D ‐Ala. Last step consisted the coupling, on solid‐phase, of the protected muramyl unit to the peptide chain. Proton spectra with good suppression of the polystyrene signals in swollen resin samples were obtained in DMF‐d₇ as a solvent and by using a nonselective 1D TOCSY/DIPSI‐2 scheme, thus allowing to follow the SPS without losses of compound and cleavage from the resin. The assignment of the proton spectra of the resin‐bound amino acid sequence and of the bound glycopeptide was achieved through the combination of MAS COSY, TOCSY and NOESY. Copyright © 2010 John Wiley & Sons, Ltd.     

Highly-substituted benzhydrylamine resin: An alternative chromatographic support for ganglioside and neutral glycosphingolipid purification

Summary Benzhydrylamine resin (BHAR) is a copolymer of (styrene-1% divinylbenzene) containing phenylmethylamine groups and commonly used as a solid support for peptide synthesis in organic solvents. We have demonstrated that a larger number of NH₃ ⁺ groups distributed throughout the BHAR matrix improves bead solvation under more polar conditions. As this characteristic might allow this aminated-polymer to be used as a stationary phase for liquid chromatography, a hyghly substituted BHAR (2.4 mmol.g⁻¹ of amine groups) was synthesized under forceful conditions. Neutral glycosphingolipids and negatively charged gangliosides and sulfatide obtained from rat brain extracts were successfully purified and fractionated in this BHAR batch by single-step, reverse-phase anion-exchange chromatography. Additionally, the anion-exchange potential of BHAR was also compared to that of commercial dimethylaminoethyl (DEAE)-Sephadex A25 resin.     

Microwave Assisted Benign Method of Chelating Resin Synthesis Having Different Thermal and Ion Exchange Properties

Summary: Microwave irradiation method was used for synthesis of chelating ion exchange resin derived fom Salicylicacid-Formaldehyde-Resorcinol (SFR-M). The resin was characterized by Elemental analysis, FTIR, TGA and SEM. The Broido and Horowitz-Metzger method were used to calculate the energy of activation (Ea) from TGA. The microwave assisted chelating resin has different thermal behaviour as compared to conventional resin (SFR-C). The sorption capacities of microwave SFR resin for transition metal ions are higher than conventional SFR resin. The separation of binary mixtures [Cu (II) and Zn (II)] in brass and [Ni (II) and Cd (II)] were successfully carried out using Kd value.