Environmentally responsive threading, dethreading, and fixation of anion-induced pseudorotaxanes

The tetracationic macrocycle cyclo[2](2,6-di(1H-imidazol-1-yl)pyridine)[2](1,4-dimethylenebenzene) hexafluorophosphate (1(4+)·4PF(6)(-)) acts as a large, flexible "molecular box" that supports the formation of environmentally responsive anion-induced pseudorotaxanes, as well as other extended structures, including metal-linked supramolecular polyrotaxanes. Specifically, the combination of the tetracation 1(4+) and bis-carboxylate guests derived from 4,4'-biphenyldicarboxylic acid and 2,6-naphthalenedicarboxylic acid results in the formation of pseudorotaxanes that respond to changes in environmental stimuli, including pH and temperature. The resulting structures can be "locked into place" via the addition of a metal-linker in the form of Ag(I); this gives rise to an ordered metal-linked polyrotaxane. The interpenetrated constructs described in this article were characterized in solution and in the solid state by one- and two-dimensional ((1)H and NOESY) NMR spectroscopy, as well as by mass spectrometry (ESI-MS) and single-crystal X-ray diffraction methods.     

Water oxidation intermediates applied to catalysis: benzyl alcohol oxidation

Four distinct intermediates, Ru(IV)═O(2+), Ru(IV)(OH)(3+), Ru(V)═O(3+), and Ru(V)(OO)(3+), formed by oxidation of the catalyst [Ru(Mebimpy)(4,4'-((HO)(2)OPCH(2))(2)bpy)(OH(2))](2+) [Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl) and 4,4'-((HO)(2)OPCH(2))(2)bpy = 4,4'-bismethylenephosphonato-2,2'-bipyridine] on nanoITO (1-PO(3)H(2)) have been identified and utilized for electrocatalytic benzyl alcohol oxidation. Significant catalytic rate enhancements are observed for Ru(V)(OO)(3+) (~3000) and Ru(IV)(OH)(3+) (~2000) compared to Ru(IV)═O(2+). The appearance of an intermediate for Ru(IV)═O(2+) as the oxidant supports an O-atom insertion mechanism, and H/D kinetic isotope effects support net hydride-transfer oxidations for Ru(IV)(OH)(3+) and Ru(V)(OO)(3+). These results illustrate the importance of multiple reactive intermediates under catalytic water oxidation conditions and possible control of electrocatalytic reactivity on modified electrode surfaces.     

Cucurbituril-modulated supramolecular assemblies: from cyclic oligomers to linear polymers

Employing bis(p-sulfonatocalix[4]arenes) (bisSC4A) and N',N'hexamethylenebis(1-methyl-4,4'-bipyridinium) (HBV(4+)) as monomer building blocks, the assembly morphologies can be modulated by cucurbit[n]uril (CB[n]) (n = 7, 8), achieving the interesting topological conversion from cyclic oligomers to linear polymers. The binary supramolecular assembly fabricated by HBV(4+) and bisSC4A units, forms an oligomeric structure, which was characterized by NMR spectroscopy, atomic force microscopy (AFM), transmission electron microscopy (TEM), dynamic light scattering (DLS), isothermal titration calorimetry (ITC), and gel permeation chromatography (GPC) experiments. The ternary supramolecular polymer participated by CB[8] is constructed on the basis of host-guest interactions by bisSC4A and the [2]pseudorotaxane HBV(4+)@CB[8], which is characterized by means of AFM, DLS, NMR spectroscopy, thermogravimetric analysis (TGA), UV/Vis spectroscopy, and elemental analysis. CB[n] plays vital roles in rigidifying the conformation of HBV(4+), and reinforcing the host-guest inclusion of bisSC4A with HBV(4+), which prompts the formation of a linear polymer. Moreover, the CB[8]-participated ternary assembly could disassemble into the molecular loop HBV(2+)@CB[8] and free bisSC4A after reduction of HBV(4+) to HBV(2+), whereas the CB[7]-based assembly remained unchanged after the reduction. CB[8] not only controlled the topological conversion of the supramolecular assemblies, but also improved the redox-responsive assembly/disassembly property practically.     

Binding modes in metal ion complexes of quinones and semiquinone radical anions: electron-transfer reactivity.

9,10-Phenanthrenequinone (PQ) and 1,10-phenanthroline-5,6-dione (PTQ) form 1:1 and 2:1 complexes with metal ions (M (n+)=Sc (3+), Y (3+), Mg (2+), and Ca (2+)) in acetonitrile (MeCN), respectively. The binding constants of PQ--M (n+) complexes vary depending on either the Lewis acidity or ion radius of metal ions. The one-electron reduced species (PTQ(-)) forms 1:1 complexes with M (n+), and PQ(-) also forms 1:1 complexes with Sc(3+), Mg(2+), and Ca(2+), whereas PQ(-) forms 1:2 complexes with Y(3+) and La(3+), as indicated by electron spin resonance (ESR) measurements. On the other hand, semiquinone radical anions (Q(-) and NQ(-)) derived from p-benzoquinone (Q) and 1,4-naphthoquinone (NQ) form Sc(3+)-bridged pi-dimer radical anion complexes, Q(-)--(Sc(3+))(n)--Q and NQ(-)--(Sc(3+))(n)-NQ (n=2 and 3), respectively. The one-electron reduction potentials of quinones (PQ, PTQ, and Q) are largely positively shifted in the presence of M (n+). The rate constant of electron transfer from CoTPP (TPP(2-)=dianion of tetraphenylporphyrin) to PQ increases with increasing the concentration of Sc(3+) to reach a constant value, when all PQ molecules form the 1:1 complex with Sc(3+). Rates of electron transfer from 10,10'-dimethyl-9,9'-biacridine [(AcrH)(2)] to PTQ are also accelerated significantly by the presence of Sc(3+), Y(3+), and Mg(2+), exhibiting a first-order dependence with respect to concentrations of metal ions. In contrast to the case of o-quinones, unusually high kinetic orders are observed for rates of Sc(3+)-promoted electron transfer from tris(2-phenylpyridine)iridium(III) [Ir(ppy)(3)] to p-quinones (Q): second-order dependence on concentration of Q, and second- and third-order dependence on concentration of Sc(3+) due to formation of highly ordered radical anion complexes, Q()--(Sc(3+))(n)--Q (n=2 and 3).     

A Molecular Modeling for the Complexation of Cyclobis(paraquat-p-phenylene) with Substituted Benzenes and Biphenyls

The molecular recognition of cyclobis(paraquat-p-phenylene), 14+, has drawn great attention recently, due to its important applications in the design and synthesis of electrochemically and chemically switchable rotaxanes, photoactive rotaxanes, and other molecular devices1. Usually, this type of molecular recognition was investigated with the methods including X-ray, NMR, UV, and IR. However, since these methods usually have difficulties in providing a detailed understanding of the energeti…     

Interaction of dinuclear ruthenium(II) supramolecular cylinders with DNA: sequence-specific binding, unwinding, and photocleavage

Metallosupramolecular chemistry was used to design a new class of synthetic agents, namely, tetracationic supramolecular cylinders, that bind strongly and noncovalently in the major groove of DNA. To gain additional information on interactions of the cylinders with DNA we explored DNA unwinding and sequence-specific binding properties, as well as DNA photonuclease activity of ruthenium(II) metallosupramolecular cylinder [Ru(2)L(3)](4+), where L is a bis-pyridylimine ligand. We found that [Ru(2)L(3)](4+) unwinds negatively supercoiled plasmid DNA and exhibits binding preference to regular alternating purine-pyrimidine sequences in a similar way to the [Fe(2)L(3)](4+) analogue. Photocleavage studies showed that, unlike [Fe(2)L(3)](4+), [Ru(2)L(3)](4+) induces single-strand breaks on irradiation by visible and UVA light and cleaves DNA mainly at guanine residues contained preferentially in regularly alternating purine-pyrimidine nucleotides. As [Ru(2)L(3)](4+) binds and cleaves DNA in a sequence-dependent manner, it may provide a useful tool for basic and applied biology, such as for controlled manipulation of the genome.     

Synthesis of new pentacyclo[5.4.0.0(2,6).0(3,10).0(5,9)]undecane-8,11-dione (PCU) cyanosilylated derivatives using sulphated zirconia and hydrotalcite as catalysts in microwave-assisted reactions under solvent free conditions

A comparison was made of the effectiveness of the functionalization reactions of pentacyclo[5.4.0.0(2,6).0(3,10).0(5,9)]undecane-8,11-dione (PCU) using sulphated zirconia in protection-deprotection reactions and Mg/Al hydrotalcite in a cyanosilylation reaction, under classical thermal conditions and imposing microwave radiation; improved yields and reaction times were considered.     

1，4-二取代苯紫外吸收光谱中的取代基效应

构建激发态取代基参数与1,4-二取代苯的紫外吸收波数之间的模型,成功地关联80个1,4-二取代苯的紫外吸收波数,其方程的相关系数为0．9805,标准偏差仅为672．27cm^-1．结果表明激发态取代基参数适用于1,4-二取代苯紫外吸收能量的研究．同时提供了研究芳香化合物的紫外吸收光谱的新方法,并有利于深入理解多取代共轭化合物的激发态物理化学性质中的取代基效应．     

2,1,3-Benzoxadiazole-based selective chromogenic chemosensor for rapid naked-eye detection of Hg2+ and Cu2+

We report a simple twisted intramolecular charge transfer (TICT) chromogenic chemosensor for rapid and selective detection of Hg(2+) and Cu(2+). The sensor was composed of an electron-acceptor 4-fluoro moiety and an electron-donor 7-mercapto-2,1,3-benzoxadiazole species where the S together with the 1-N provided the soft binding unit. Upon Hg(2+) and Cu(2+) complexation, remarkable but different absorbance spectra shifts were obtained in CH(3)CN-H(2)O mixed buffer solution at pH 7.6, which can be easily used for naked-eye detection. The sensor formed a stable 2:1 complex with Cu(2+), and both 2:1 and 3:1 complexes with Hg(2+). While alkali-, alkaline earth- and other heavy and transition metal ions such as Na(+), Mg(2+), Mn(2+), Co(2+), Ni(2+), Ag(+), Zn(2+), Pb(2+) and Cd(2+) did not cause any significant spectral changes of the sensor. This finding is not only a supplement to the detecting methods for Hg(2+) and Cu(2+), but also adds new merits to the chemistry of 4,7-substituted 2,1,3-benzoxadiazoles.     

Formation of supramolecular cavitands on copper electrode surfaces

The adsorption of 1,1'-dibenzyl-4,4'-bipyridinium molecules (dibenzyl-viologen or DBV(2+) for the sake of simplicity) on chloride precovered Cu(100) has been studied in an electrochemical environment by means of cyclic voltammetry and in situ scanning tunneling microscopy. DBV(2+) spontaneously forms a highly ordered phase on the chloride c(2 x 2) adlayer at potentials close to the onset of the copper dissolution reaction when the pure supporting electrolyte (10 mM HCl/5 mM KCl) is exchanged by one also containing DBV(2+). This ordered phase can be described by a ( radical 53 x radical 53)R15.9 degrees unit cell relating the organic adlayer to the chloride c(2 x 2) structure underneath or alternatively by a ( radical 106 x radical 106)R29.05 degrees unit cell relating the organic layer to the Cu(1 x 1) substrate structure. Thus, the negatively charged chloride layer acts as a template for the adsorption and phase formation of DBV(2+). Compared to the copper-chloride interaction, the DBV(2+)-chloride interaction appears to be weaker since the organic layer can be easily removed from the surface by the tunneling tip when drastic tunneling conditions (low bias voltage, high tunneling current) are applied. A key structural element of the DBV(2+) adlayer is an assembly of four individual DBV(2+) molecules forming square-shaped supramolecular units with pronounced cavities in their center. Characteristically, the supramolecular assemblies reveal a preferential rotational orientation resulting in the appearance of two chiral forms of these assemblies. Furthermore, these two chiral supramolecular assemblies occur in two mirrored domains of the ( radical 53 x radical 53)R15.9 degrees structure. It can be assumed that these viologen-based supramolecular architectures can be used as potential host cavitands for the inclusion of smaller organic molecules.     

Mechanisms of electron-transfer oxidation of NADH analogues and chemiluminescence. Detection of the keto and enol radical cations

The radical cation of an NADH analogue (BNAH: 1-benzyl-1,4-dihydronicotinamide) has been successfully detected as the transient absorption and ESR spectra in the thermal electron transfer from BNAH to Fe(bpy)(3)(3+) (bpy = 2,2'-bipyridine) and Ru(bpy)(3)(3+). The ESR spectra of the radical cations of BNAH and the dideuterated compound (BNAH-4,4'-d(2)) indicate that the observed radical cation is the keto form rather than the enol form in the tautomerization. The deprotonation rate and the kinetic isotope effects of the keto form of BNAH(*)(+) were determined from the kinetic analysis of the electron-transfer reactions. In the case of electron transfer from BNAH to Ru(bpy)(3)(3+), the chemiluminescence due to Ru(bpy)(3)(2+) was observed in the second electron-transfer step from BNA(*), produced by the deprotonation of the keto form of BNAH(*)(+), to Ru(bpy)(3)(3+). The observation of chemiluminescence due to Ru(bpy)(3)(2+) provides compelling evidence that the Marcus inverted region is observed even for such an intermolecular electron-transfer reaction. When BNAH is replaced by 4-tert-butylated BNAH (4-t-BuBNAH), no chemiluminescence due to Ru(bpy)(3)(2+) has been observed in the electron transfer from 4-t-BuBNAH to Ru(bpy)(3)(3+). This is ascribed to the facile C-C bond cleavage in 4-t-BuBNAH(*)(+). In the laser flash photolysis of a deaerated MeCN solution of BNAH and CHBr(3), the transient absorption spectrum of the enol form of BNAH(*)(+) was detected instead of the keto form of BNAH(*)(+), and the enol form was tautomerized to the keto form. The rate of intramolecular proton transfer in the enol form to produce the keto form of BNAH(*)(+) was determined from the decay of the absorption band due to the enol form and the rise in the absorption band due to the keto form. The kinetic isotope effects were observed for the intramolecular proton-transfer process in the keto form to produce the enol form.     

Highly sensitive and fast responsive fluorescence turn-on chemodosimeter for Cu2+ and its application in live cell imaging

A rhodamine B derivative 4 containing a highly electron-rich S atom has been synthesized as a fluorescence turn-on chemodosimeter for Cu(2+). Following Cu(2+)-promoted ring-opening, redox and hydrolysis reactions, comparable amplifications of absorption and fluorescence signals were observed upon addition of Cu(2+); this suggests that chemodosimeter 4 effectively avoided the fluorescence quenching caused by the paramagnetic nature of Cu(2+). Importantly, 4 can selectively recognize Cu(2+) in aqueous media in the presence of other trace metal ions in organisms (such as Fe(3+), Fe(2+), Cu(+), Zn(2+), Cr(3+), Mn(2+), Co(2+), and Ni(2+)), abundant cellular cations (such as Na(+), K(+), Mg(2+), and Ca(2+)), and the prevalent toxic metal ions in the environment (such as Pb(2+) and Cd(2+)) with high sensitivity (detection limit < or =10 ppb) and a rapid response time (< or =1 min). Moreover, by virtue of the chemodosimeter as fluorescent probe for Cu(2+), confocal and two-photon microscopy experiments revealed a significant increase of intracellular Cu(2+) concentration and the subcellular distribution of Cu(2+), which was internalized into the living HeLa cells upon incubation in growth medium supplemented with 50 muM CuCl(2) for 20 h.     

Evaluation of the metal binding properties of a histidine-rich fusogenic peptide by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICRMS) was used to investigate metal ion interactions of the 18 amino acid peptide fragment B18 (LGLLLRHLRHHSNLLANI), derived from the membrane-associated protein bindin. The peptide sequence B18 represents the minimal membrane-binding motif of bindin and resembles a putative fusion peptide. The histidine-rich peptide has been shown to self-associate into distinct supramolecular structures, depending on the presence of Zn(2+) and Cu(2+). We examined the binding of B18 to the metal ions Cu(2+), Zn(2+), Mg(2+), Ca(2+), Mn(2+) and La(3+). For Cu(2+), we compared the metal binding affinities of the wild-type B18 peptide with those of its mutants in which one, two or three histidine residues have been replaced by serines. Upon titration of B18 with Cu(2+) ions, we found sequential binding of two Cu(2+) ions with dissociation constants of approximately 34 and approximately 725 micro M. Mutants of B18, in which one histidine residue is replaced by serine, still exhibit sequential binding of two copper ions with affinities for the first Cu(2+) ion comparable to that of wild-type B18 peptide, but with a greatly reduced affinity for the second Cu(2+) ion in mutants H112S and H113S. For mutants in which two histidines are replaced by serines, the affinity for the first Cu(2+) ion is reduced approximately 3-10 times in comparison with B18. The mutant in which all three histidine residues are replaced by serines exhibits an approximately 14-fold lower binding for the first Cu(2+) ion compared with B18. For the other metal ions under investigation (Zn(2+), Mg(2+), Ca(2+), Mn(2+) and La(3+)), a modest affinity to B18 was detected binding to the peptide in a 1 : 1 stoichiometry. Our results show a high affinity of the wild-type fusogenic peptide B18 for Cu(2+) ions whereas the Zn(2+) affinity was found to be comparable to that of other di- and trivalent metal ions.     

Chemometric analysis of voltammetric data on metal ion binding by selenocystine

The behavior of selenocystine (SeCyst) alone or in the presence of various metal ions (Bi(3+), Cd(2+), Co(2+), Cu(2+), Cr(3+), Ni(2+), Pb(2+), and Zn(2+)) was studied using differential pulse voltammetry (DPV) over a wide pH range. Voltammetric data matrices were analyzed using chemometric tools recently developed for nonlinear data: pHfit and Gaussian Peak Adjustment (GPA). Under the experimental conditions tested, no evidence was found for the formation of metal complexes with Bi(3+), Cu(2+), Cr(3+), and Pb(2+). In contrast, SeCyst formed electroinactive complexes with Co(2+) and Ni(2+) and kinetically inert but electroactive complexes with Cd(2+) and Zn(2+). Titrations with Cd(2+), Co(2+), Ni(2+), and Zn(2+) produced data that were reasonably consistent with the formation of stable 1:1 M(SeCyst) complexes.     

Triple molecular recognition as a directing element in the formation of host-guest complexes with p-sulfonatocalix[4]arene and beta-cyclodextrin

We have investigated a mixture consisting of p-sulfonatocalix[4]arene (CX4), beta-cyclodextrin (beta-CD), and 2,3-diazabicyclo[2.2.2]oct-2-ene (1) and its bridgehead-substituted derivative (2) in the absence and presence of Zn(2+). In the absence of Zn(2+), four equally populated host-guest complexes exist in solution, as projected from their comparable binding constants (ca. 1000 M(-1)). However, upon the addition of Zn(2+), the formation of a ternary complex, CX4 x 1 x Zn(2+), is induced by a synergy of three supramolecular interactions (Coulombic, hydrophobic, and weak metal-ligand bonding). Concomitantly, the CX4 x 2 complex is destabilized by competitive binding, which drives the system toward a state where only two complexes predominate: namely, CX4 x 1 x Zn(2+) and beta-CD x 2. Known binding constants for the multiple equilibria were used to model the complex system, and the results were consistent with experimental data obtained from 1D and 2D NMR as well as induced circular dichroism (ICD) spectroscopy. The combined results demonstrate how a subtle interplay between cooperative and competitive binding can be exploited to design a complex multicomponent sorting system.     

Substitution reactions involving the 2,6-methyl groups of 1,4-dihydropyridines

4,4-Disubstituted 1,4-dihydropyridines (I) are brominated with bromine in chloroform to give 2,6-bis(bromomethyl)-4,4-disubstituted 1,4-dihydropyridines (II), whereas 2,6-bis(dibromomethyl)-4,4-disubstituted 1,4-dihydropyridines (III) are obtained in the case of bromination of I in acetic acid. The bromine atoms in II and III are labile and readily undergo nucleophilic substitution.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1519–1524, November, 1978.     

Synthesis of isoquinobenzodiazepinediones

1-(2′-Chloroacetylamino)-4,4-dimethyl-1,4-dihydro-3(2H)-isoquinolinone ( 3 ) was cyclised by treatment with sodium hydride in dimethyl sulphoxide containing 0.1 % of water to give 10,10-dimethyl-6,7,9,10-tetrahydro-5H,14bH-isoquino[2,1-d][1,4]benzodiazepine-6,9-dione ( 4 ) in a yield of 80%. In anhydrous dimethyl sulphoxide the main product of the reaction was 5-N-(4,4-dimethyl-1-phenyl-1,4-dihydro-3(2H)-isoquinolinon-1′-yl)isoquino[2,1-d][1,4]benzodiazepine-6,9-dione ( 5 ), which was also prepared by the reaction of 3 with 4 .     

Incorporation of triazole into a quinoline-rhodamine conjugate imparts iron(iii) selective complexation permitting detection at nanomolar levels

Two new rhodamine based probes 1 and 2 for the detection of Fe(3+) were synthesized and their selectivity towards Fe(3+) ions in the presence of other competitive metal ions tested. The probe 1 formed a coloured complex with Fe(3+) as well as Cu(2+) ions and revealed the lack of adequate number of coordination sites for selective complexation with Fe(3+). Incorporation of a triazole unit to the chelating moiety of 1 resulted in the probe 2, that displayed Fe(3+) selective complex formation even in the presence of other competitive metal ions like Li(+), Na(+), K(+), Cu(2+), Mg(2+), Ca(2+), Sr(2+), Cr(3+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Zn(2+), Cd(2+), Hg(2+) and Pb(2+). The observed limit of detection of Fe(3+) ions (5 × 10(-8) M) confirmed the very high sensitivity of 2. The excellent stability of 2 in physiological pH conditions, non-interference of amino acids, blood serum and bovine serum albumin (BSA) in the detection process, and the remarkable selectivity for Fe(3+) ions permitted the use of 2 in the imaging of live fibroblast cells treated with Fe(3+) ions.     

Synthesis and ion-exchange properties of thermally stable stannic selenite

Stannic selenites have been synthesized under a variety of conditions. The most stable sample is prepared by mixing 0-0.5M solutions of stannic chloride and sodium selenite in the ratio of 1:1 at pH 1. It is a bifunctional amorphous material. A tentative structure has been proposed on the basis of chemical composition, pH titrations, infrared and thermogravimetric analyses. Its ion-exchange capacity is 0.75 and 0.73 meq g after drying at 50 degrees and 500 degrees respectively. Its analytical importance has been established by the following quantitative separations: Cu(2+) from Ni(2+), Co(2+), Fe(3+), Ga(3+) and In(3+), Fe(3+) from Pb(2+) and Sc(3+), and Sc(3+) from VO(2+).     

Predicting the energy of the water exchange reaction and free energy of solvation for the uranyl ion in aqueous solution

The structures and vibrational frequencies of UO2(H2O)4(2+) and UO2(H2O)5(2+) have been calculated using density functional theory and are in reasonable agreement with experiment. The energies of various reactions were calculated at the density functional theory (DFT) and MP2 levels; the latter provides the best results. Self-consistent reaction field calculations in the PCM and SCIPCM approximations predicted the free energy of the water exchange reaction, UO2(H2O)4(2+) + H2O <--> UO2(H2O)5(2+). The calculated free energies of reaction are very sensitive to the choice of radii (O and H) and isodensity values in the PCM and SCIPCM models, respectively. Results consistent with the experimental HEXS value of -1.19 +/- 0.42 kcal/mol (within 1-3 kcal/mol) are obtained with small cavities. The structures and vibrational frequencies of the clusters with second solvation shell waters: UO2(H2O)4(H2O)8(2+), UO2(H2O)4(H2O)10(2+), UO2(H2O)4(H2O)11(2+), UO2(H2O)5(H2O)7(2+), and UO2(H2O)5(H2O)10(2+), were calculated and are in better agreement with experiment as compared to reactions involving only UO2(H2O)4(2+) and UO2(H2O)5(2+). The MP2 reaction energies for water exchange gave gas-phase results that agreed with experiment in the range -5.5 to +3.3 kcal/mol. The results were improved by inclusion of a standard PCM model with differences of -1.2 to +2.7 kcal/mol. Rearrangement reactions based on an intramolecular isomerization leading to a redistribution of water in the two shells provide good values in comparison to experiment with values of Delta G(exchange) from -2.2 to -0.5 kcal/mol so the inclusion of a second hydration sphere accounts for most solvation effects. Calculation of the free energy of solvation of the uranyl cation yielded an upper bound to the solvation energy of -410 +/- 5 kcal/mol, consistent with the best experimental value of -421 +/- 15 kcal/mol.