刷状结构的阳离子性接枝微粒QPDMAEMA/SiO_2对牛血清白蛋白的吸附特性

以微米级硅胶微粒为基质,通过接枝聚合和大分子反应,制备了具有刷状结构的阳离子性接枝微粒,深入研究了其对牛血清白蛋白(BSA)的强吸附能力、吸附机理和吸附热力学.首先使含叔胺基团的单体甲基丙烯酸二甲基氨基乙酯(DMAEMA)在硅胶微粒表面发生接枝聚合,制得接枝微粒PDMAEMA/SiO2,然后以氯乙胺为试剂,使接枝大分子PDMAEMA链中的叔胺基团发生季铵化反应,获得了具有刷状结构的阳离子聚电解质的功能接枝微粒QPDMAEMA/SiO2.测定了微粒QPDMAEMA/SiO2的zeta电位,实施了对BSA的等温吸附实验,考察了介质pH值、离子强度及温度对吸附作用的影响,研究了吸附热力学.研究结果表明,功能接枝微粒QPDMAEMA/SiO2比接枝微粒PDMAEMA/SiO2具有更高的zeta电位,在静电相互作用驱动下,微粒QPDMAEMA/SiO2对BSA具有很强的吸附能力.吸附容量随介质pH值的增大呈现先增大后减小的变化趋势,当pH值等于BSA的等电点(pI=4.7)时,具有最高的吸附容量(高达112 mg?g-1).以等电点为界,离子强度对吸附容量会产生完全相反的影响作用:当介质pH值小于BSA的等电点时,电解质浓度增大,吸附容量增高;当介质pH值等于BSA的等电点时,吸附容量几乎不随电解质的浓度发生变化.吸附过程熵值减小而且放出热量,是一个焓驱动的吸附过程.     

刷状结构的阳离子性接枝微粒QPDMAEMA/SiO2对牛血清白蛋白的吸附特性

以微米级硅胶微粒为基质, 通过接枝聚合和大分子反应, 制备了具有刷状结构的阳离子性接枝微粒, 深入研究了其对牛血清白蛋白(BSA)的强吸附能力、吸附机理和吸附热力学. 首先使含叔胺基团的单体甲基丙烯酸二甲基氨基乙酯(DMAEMA)在硅胶微粒表面发生接枝聚合, 制得接枝微粒PDMAEMA/SiO₂, 然后以氯乙胺为试剂, 使接枝大分子PDMAEMA链中的叔胺基团发生季铵化反应, 获得了具有刷状结构的阳离子聚电解质的功能接枝微粒QPDMAEMA/SiO₂. 测定了微粒QPDMAEMA/SiO₂的zeta 电位, 实施了对BSA的等温吸附实验, 考察了介质pH值、离子强度及温度对吸附作用的影响, 研究了吸附热力学. 研究结果表明, 功能接枝微粒QPDMAEMA/SiO₂ 比接枝微粒PDMAEMA/SiO₂ 具有更高的zeta 电位, 在静电相互作用驱动下, 微粒QPDMAEMA/SiO₂对BSA具有很强的吸附能力. 吸附容量随介质pH值的增大呈现先增大后减小的变化趋势,当pH值等于BSA的等电点(pI=4.7)时, 具有最高的吸附容量(高达112 mg·g^-1). 以等电点为界, 离子强度对吸附容量会产生完全相反的影响作用: 当介质pH值小于BSA的等电点时, 电解质浓度增大, 吸附容量增高; 当介质pH值等于BSA的等电点时, 吸附容量几乎不随电解质的浓度发生变化. 吸附过程熵值减小而且放出热量,是一个焓驱动的吸附过程.     

构建芳叔胺-BPO氧化还原引发体系实现苯乙烯在硅胶微粒表面的高效接枝聚合

首先使用偶联剂γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行了表面改性,制得表面带有伯胺基的改性微粒SiO2-AMPS,接着使4-(二乙氨基)水杨醛(DEAS)与微球SiO2-AMPS发生席夫碱反应,制得表面含有芳叔胺基的改性微粒SiO2-DEAS.使改性微粒SiO2-DEAS表面的芳叔胺基团与溶液中的BPO构成氧化-还原引发体系,实现了油溶性单体苯乙烯(St)在硅胶微粒表面的引发接枝聚合,制得了高接枝度(27 g/100g)的接枝微粒SiO2-DEAS-g-PSt.采用红外光谱(FTIR)、扫描电镜(SEM)及热重分析(TGA)等方法对接枝微粒SiO2-DEAS-g-PSt进行了表征.在此基础上,重点研究了主要因素对芳叔胺-BPO体系引发St接枝聚合的影响.研究结果表明,与在固体微粒表面引入可聚合双键的"穿过接枝"(grafting through)法相比,芳叔胺-BPO体系引发的接枝聚合,由于活性位点位于载体表面,故具有高的接枝度,是油溶性单体的一种高效率的表面引发接枝法.为制得高接枝度的接枝微粒SiO2-DEAS-g-PSt,适宜的温度为50℃,适宜的BPO用量为单体的3 wt%左右,适宜的单体浓度为10 wt%.     

功能接枝微粒PDMAEMA/SiO_2的制备及其吸附特性初探

凭借偶联剂γ-(甲基丙烯酰氧)丙基三甲氧基硅烷的媒介作用,在溶液聚合体系中,采用"接出"("graft from")法将单体甲基丙烯酸二甲氨基乙基酯(DMAEMA)接枝于硅胶微粒表面,制得了接枝微粒PDMAEMA/SiO2,重点考察了主要因素对接枝聚合的影响,并测定了接枝微粒的Zeta电位,初步考察了其吸附特性。研究结果表明,已接枝到硅胶表面的聚合物层,会对后续的接枝聚合产生阻隔作用;温度及引发剂用量等因素显著影响接枝度,在适宜条件下可制得接枝度为22g/100g的接枝微粒;在较大的pH范围内,接枝微粒的Zeta电位为较大的正值,在静电相互作用下,接枝微粒对铬酸根离子会产生强吸附作用.     

表面引发接枝聚合法制备接枝微粒PHEMA/SiO2及其8-羟基喹啉功能化转变研究

通过用表面引发接枝聚合和高分子反应制备8-羟基喹啉型复合螯合微粒.首先使用γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行表面改性,制得改性微粒AMPS-SiO2;使改性微粒AMPS-SiO2表面的氨基与溶液中的过硫酸盐构成氧化-还原引发体系,实施了甲基丙烯酸羟乙酯(HEMA)在硅胶微粒表面的高效引发接枝聚合,制得了接枝微粒PHEMA/SiO2.又以5-氯甲基-8-羟基喹啉(CHQ)为试剂,使接枝的PHEMA发生大分子反应,实现了接枝微粒PHEMA/SiO2的8-羟基喹啉功能化转变,制得了复合微粒HQ-PHEMA/SiO2.采用多种手段对两种微粒进行了表征,重点研究了氨基-过硫酸盐表面引发接枝体系的接枝聚合机理,并研究了CHQ与接枝PHEMA的醇羟基之间取代反应的机理,还初步考察了功能微粒HQ-PHEMA/SiO2对重金属离子的螯合吸附性能.研究结果表明,氨基-过硫酸盐表面引发接枝聚合体系具有很高的引发活性,在室温(30℃)即可制得高接枝密度(40 g/100g)的接枝微粒PHEMA/SiO2;CHQ与接枝PHEMA的醇羟基之间的取代反应遵循SN1的反应历程,使用强极性溶剂有利于反应的进行.微粒HQ-PHEMA/SiO2对重金属离子呈现很强的螯合吸附能力,是一种功能复合微粒.     

接枝型三相转移催化剂的制备及其催化作用

将苯乙烯(St)接枝聚合在微米级硅胶表面,制备了接枝微粒PSt/SiO2;使用新型氯甲基化试剂1,4-二氯甲氧基丁烷,对接枝在硅胶表面的聚苯乙烯进行了氯甲基化(CM)反应,制得了氯甲基聚苯乙烯/硅胶(CMPS/SiO2)接枝微粒;使三乙胺与CMPS分子链上的苄氯基团发生季铵化反应,制得了固载有季铵盐(Quaternary salt)的接枝微粒QPSt/SiO2,即制得了接枝型三相相转移催化剂.将此相转移催化剂用于氯化苄与乙酸钠合成乙酸苄酯的相转移催化反应,考察了催化活性、各种因素对相转移催化反应的影响及催化剂的重复使用性能.实验结果表明,接枝型三相相转移催化剂QPSt/SiO2对乙酸苄酯的合成具有较高的催化活性,在液-固-液之间即可有效地实现反应物种乙酸根的转移,在60℃的较低温度下反应7 h,氯化苄的转化率可达66.1%;研究发现,固体催化剂QPSt/SiO2表面接枝聚合物PSt的季铵化程度对其催化活性有很大的影响,季铵化程度过大与过小催化活性都较低,当季铵化程度为20%左右时,催化剂的活性最高.     

在接枝微粒PS/SiO2上固载季铵盐及初步应用

采用"grafting from"的方式在溶液聚合体系中将苯乙烯(St)接枝聚合在微米级硅胶表面,制备了接枝微粒PS/SiO2;使用新型氯甲基化试剂1,4-二氯甲氧基丁烷,对接枝的聚苯乙烯进行了氯甲基化反应,制得了接枝有氯甲基聚苯乙烯(CMPS)的接枝微粒CMPS/SiO2;使用叔胺试剂对CMPS大分子链上的苄氯基团实施了季铵化反应,最终制得了固载有季铵盐(Quaternary salt)的复合型功能微粒QPS/SiO2.用红外光谱(FTIR)与化学分析法对功能微粒QPS/SiO2的化学结构与组成进行了表征;研究了各种因素对CMPS/SiO2季铵化反应的影响规律;初步考察了QPS/SiO2对大肠杆菌的(E.coil)抗菌性能.研究结果表明,接枝微粒CMPS/SiO2的季铵化反应比较容易进行;溶剂性质、叔胺试剂的种类及温度对CMPS/SiO2的季铵化反应均有影响.使用CMPS的良溶剂和用位阻小的叔胺试剂,所得产物的季铵化度均较高.QPS/SiO2具有很强的抗菌活性.使用很小的剂量(10 g/L)、在很短的接触时间内(3 min)抗菌率即可达100%,是一种优良的水不溶抗菌材料;QPS/SiO2的季铵化度越高,其抗菌活性越高;使用碳氢链较长的三丁胺制备的QPS/SiO2,其抗菌性能明显优于使用三乙胺制备的QPS/SiO2.     

接枝型三相相转移催化剂的制备及其催化作用

将苯乙烯（St）接枝聚合在微米级硅胶表面,制备了接枝微粒PSt／SiO2;使用新型氯甲基化试剂1,4-二氯甲氧基丁烷,对接枝在硅胶表面的聚苯乙烯进行了氯甲基化（CM）反应,制得了氯甲基聚苯乙烯／硅胶（CMPS／SiO2）接枝微粒;使三乙胺与CMPS分子链上的苄氯基团发生季铵化反应,制得了固载有季铵盐（Quaternary salt）的接枝微粒QPSt／SiO2,即制得了接枝型三相相转移催化剂．将此相转移催化剂用于氯化苄与乙酸钠合成乙酸苄酯的相转移催化反应,考察了催化活性、各种因素对相转移催化反应的影响及催化剂的重复使用性能．实验结果表明,接枝型三相相转移催化剂QPSt／SiO2对乙酸苄酯的合成具有较高的催化活性,在液-固-液之间即可有效地实现反应物种乙酸根的转移,在60℃的较低温度下反应7h,氯化苄的转化率可达66．1％;研究发现,固体催化剂QPSt／SiO2表面接枝聚合物PSt的季铵化程度对其催化活性有很大的影响,季铵化程度过大与过小催化活性都较低,当季铵化程度为20％左右时,催化剂的活性最高．     

氨基-铈盐氧化还原体系引发对苯乙烯磺酸钠在硅胶微粒表面的接枝聚合

使用偶联剂γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行表面化学改性,将氨基引入硅胶微粒表面,构成氨基-Ce(Ⅳ)盐氧化-还原引发体系。研究了在其作用下对苯乙烯磺酸钠(SSS)在硅胶微粒表面的接枝聚合,制得了具有较高接枝度(18g/100g)的接枝微粒PSSS/SiO2。采用FTIR、SEM及TGA等方法对接枝微粒进行表征。考察了对该表面引发接枝聚合体系接枝度影响的主要因素。结果表明,氨基-Ce(Ⅳ)盐体系可以有效地引发乙烯基单体在固体微粒表面的接枝聚合,氨基的质子化对产生自由基的引发步骤具有负影响;为提高PSSS的接枝度,引发剂溶液(铈盐+硫酸)宜采用滴加的方式加入;适宜的单体浓度为14(wt)%;接枝聚合宜在50℃下进行。接枝微粒PSSS/SiO2是一种功能复合微粒,凭借离子交换作用,对重金属离子和稀土离子均可产生强的吸附作用。     

乙酸苄酯合成中接枝型三相相转移催化剂的活性及催化反应动力学

采用"接出(grafting from)"方式,将苯乙烯(St)接枝聚合在微米级硅胶表面,然后对接枝的聚苯乙烯进行了氯甲基化(CM)反应,制得了氯甲基聚苯乙烯/硅胶微粒(CMPS/SiO2);使三丁胺与三苯基膦分别与CMPS大分子链上的苄氯基团发生季铵化与季鏻化反应,分别制得了固载有季铵盐与季鏻盐的接枝微粒QN-PSt/SiO2与QP-PSt/SiO2,即制得了两种接枝型三相相转移催化剂.将该催化剂用于苄氯与乙酸钠合成乙酸苄酯的相转移催化反应,并重点考察了催化剂的活性与催化动力学.实验结果表明,两种接枝型三相相转移催化剂QN-PSt/SiO2与QP-PSt/SiO2对乙酸苄酯的合成都具有明显的催化活性,在液-固-液之间可有效地实现反应物种乙酸根的转移;两者相比,季鏻盐型的催化剂QP-PSt/SiO2的催化活性更高;当水相中乙酸钠用量大大过量时,在有机相中苄氯与乙酸根的反应属准一级反应;两个相转移反应体系相比,以QP-PSt/SiO2为催化剂时反应的表观活化能更低.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.