Colloidal crystallization of cationic gel spheres of lightly cross-linked poly(2-vinylpyridine) in the deionized aqueous suspension

Colloidal crystallization of deionized suspensions of the cationic gel spheres of lightly cross-linked poly(2-vinylpyridine) (PEGMA-P2VP) has been studied from the microscopic observation, morphology, phase diagram, and elastic property. Critical concentrations of melting coexisted with ion-exchange resins were low compared with those without resins and increased but slightly as the degree of cross-linking decreased. The densities of the gel spheres, i.e., weight percent of the gel spheres divided by the corresponding volume percent, were between 0.7 and 0.9 and rather insensitive to the degree of cross-linking of the spheres examined from 0.1 to 1 mol%. This means that the gel spheres are rather dense. The closest inter-sphere distances of the crystals were much longer than the hydrodynamic diameters of the gel spheres especially at low sphere concentrations. Fluctuation parameters evaluated from the rigidities of the crystals of PEGMA-P2VP were similar to those of colloidal crystals of typical hard spheres. Mono-layered adsorption of cationic gel spheres at the nearest-neighbored layer from a cover glass of the cell was observed microscopically. The stable ordered layers, however, formed beyond the monolayer in the suspension phase. These experimental findings support the important role of the extended electrical double layers around the cationic gel spheres in addition to the excluded volume effect of the sphere themselves on the crystallization.     

Cationic gel crystals of lightly cross-linked poly(2-vinylpyridine) spheres (170∼180 nm in diameter) in the deionized aqueous suspension

Colloidal crystallization of deionized suspensions of the cationic gel spheres of lightly cross-linked poly(2-vinylpyridine), AIBA-P2VP (170～180 nm in diameter) has been studied from the microscopic observation, morphology, phase diagram, and elastic property. Critical concentrations of melting that coexisted with ion-exchange resins were low compared with those without resins and decreased as the degree of cross-linking decreased. The density of a gel sphere in suspension state (ρ), i.e., weight percent of the gel spheres divided by the corresponding volume percent, was between 0.5 and 0.8, and decreased as the degree of cross-linking of the spheres decreased. The ρ values also decreased with decreasing size of gel spheres, which supports the small P2VP gel spheres being softer than the large ones. The closest intersphere distances of the crystals were much longer than the hydrodynamic diameters of the gel spheres especially at low sphere concentrations. Fluctuation parameters evaluated from the rigidities of the crystals of AIBA-P2VP (0.05～0.09) were similar to those of gel crystals of cationic gel spheres of lightly cross-linked poly(2-vinylpyridine) spheres coated with poly(ethylene glycol), 400 nm in diameter, and thermo-sensitive gel spheres of pNIPAm, poly(N-isopropylacrylamide), but larger than those of typical colloidal hard spheres. The stable crystal phase formed beyond the adsorbed monolayer of cationic gel spheres on the surface of the substrate. These experimental findings support important role of the extended electrical double layers around the cationic gel spheres in addition to the excluded volume effect of the sphere themselves on the crystallization.     

Kinetic studies of colloidal crystallization of thermo-sensitive gel spheres of poly(N-isopropylacrylamide)

Crystal growth rate coefficients, k of the colloidal crystallization of thermo-sensitive gel spheres of poly(N-isopropylacrylamide) were measured from the time-resolved reflection spectroscopy mainly by the inverted mixing method in the deionized state. Crystallization of colloidal silica spheres were also measured for comparison. The k values of gel and silica systems increased sharply as the sphere concentration and suspension temperature increased. The k values of gel system were insensitive to the degree of cross-linking in the range from 10 to 2?mol% of cross-linker against amount of the monomer in mole and decreased sharply when the degree of cross-linking decreased further to 0.5?%. The k values increased as gel size increased. The k values of gel systems at 20?°C were small and observed only at the very high sphere concentration in volume fraction, whereas those at 45?°C were high but smaller than those of silica systems. Induction time (t _i) after which crystallization starts, increased as the degree of cross-linking increased and/or the gel size decreased at any temperatures, when comparison was made at the same gel concentration. The t _i values at 45?°C were high and decreased sharply with increasing sphere concentration, whereas those at 20?°C were high only at the very high sphere concentrations. Significant difference in the k and t _i values between the soft gels and hard silica spheres was clarified. These kinetic results support that the electrical double layers play an important role for the gel crystallization in addition to the excluded volume of gel spheres. It is deduced further that the electrical double layers of the gel system form from the vague interfaces (between soft gel and water phases) compared with those of typical colloidal hard sphere system.     

Colloidal crystallization of thermo-sensitive gel spheres of poly (N-isopropyl acrylamide). Influence of degree of cross-linking of the gels

Morphology, phase diagram, and reflection spectroscopy of the colloidal crystals of thermo-sensitive gel spheres, poly (N-isopropylacrylamide) having degrees of cross-linking 10 and 2?mol.% (pNIPAm(200?C10) and pNIPAm(200?C2)) were studied. Giant colloidal single crystals formed at very low gel concentrations. Critical concentrations of melting increased as the degree of cross-linking decreased in the range from 10 to 0.5?mol.% and/or suspension temperature increased from 20 to 45?°C. The critical concentration decreased sharply as the suspensions were deionized with coexistence of the mixtures of cation- and anion-exchange resins. Density of a gel sphere (gel concentration in weight percent divided by that in volume percent) increased sharply as the degree of cross-linking and/or temperature increased. These results demonstrated that the colloidal crystallization takes place by the extended electrical double layers formed around the gel spheres in addition of the excluded-volume effect of the gels. Most of the researchers including the authors have believed that the crystallization of the gel spheres takes place by the excluded-volume effect. However, the present work clarified that the colloidal interfaces, which are inevitable for the formation of the electrical double layers, are formed firmly between the water phase and gel spheres, though the gel spheres contain a lot of water molecules in the sphere region.     

Cationic gel crystals and amorphous solids of lightly cross-linked poly(2-vinylpyridine) spheres in the deionized aqueous suspension

Colloidal crystallization and amorphous solidification of deionized suspensions of the polydispersed cationic gel spheres of lightly cross-linked poly(2-vinylpyridine), CAIBA-P2VP (107～113 nm in diameter, ±19～22 nm in dispersity), have been studied from the reflection spectroscopy, morphology, phase diagram, and elastic property. Crystallization takes place even for the polydispersed cationic gel spheres by the significant contribution of the extended electrical double layers formed around the spheres. Critical concentrations of melting coexisted with ion exchange resins were around 0.02 in volume fraction and high compared with those of other cationic and anionic gel crystals examined hitherto. The densities (ρ) of CAIBA-P2VP in suspension state, i.e., weight percent of the gel spheres divided by the corresponding volume percent, was around 0.3. The ρ values decreased sharply with decreasing size of P2VP gel spheres, which supports the small gel spheres containing much water inside and being softer than the large ones. The closest intersphere distances of the crystals and/or amorphous solids were much longer than the hydrodynamic diameters of the gel spheres especially at low sphere concentrations. Fluctuation parameters (b) evaluated from the rigidities of CAIBA-P2VP (0.15～0.28) were large compared with those of gel crystals of large-sized P2VP-based cationic gel spheres, anionic thermosensitive gel spheres of poly(N-isopropylacrylamide) (0.05～0.09) and further much larger than those of typical colloidal hard spheres (around 0.03). The dispersity in sphere size played an important role for distinguishing crystal and amorphous solid. Importance of the extended electrical double layers around the cationic gel spheres is supported in addition to the excluded volume effect of the sphere themselves on the crystallization and/or solidification.     

Crystal structure of thermosensitive gel spheres of poly(N-isopropylacrylamide) in the deionized aqueous suspension as studied by the static light-scattering measurements

Static light-scattering measurements of deionized suspensions of the thermosensitive gels of poly(N-isopropylacrylamide) with various degrees of cross-linking and sizes were made at 20 and 40 °C. Sharp scattering peaks are observed in the scattering curve, and they were attributed to the face-centered cubic (fcc) and/or body-centered cubic lattices (bcc) in the distribution of gel spheres. The fcc and bcc crystal structures formed in the stable and unstable conditions, respectively, i.e., the former formed more favorably at high sphere concentrations and/or low temperatures. The closest intersphere distances were much longer than the hydrodynamic diameters of the gel spheres especially at low sphere concentrations. These experimental results emphasize the important role of the extended electrical double layers in the crystallization of gel spheres, though the contribution of the double layers in gel systems is weak compared with that in the typical colloidal spheres.     

Colloidal crystallization of thermosensitive gel spheres of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) with low degree of cross-linking

Morphology, phase diagram, and reflection spectroscopy of the colloidal crystals of thermosensitive gel spheres, poly(N-isopropylacrylamide) ((200–0.5), 318 and 116 nm in the hydrodynamic diameter at 25°C and 45°C, and 0.5% in the degree of cross-linking) were studied. Giant colloidal single crystals formed at very low gel concentrations. Densities of the gel spheres were 0.030 and 0.61 at 25°C and 45°C, respectively. Critical concentration of melting of gel spheres (0.8 wt.% without ion-exchange resins) decreased sharply to 0.015 wt.% at 25°C as the gel suspension was deionized exhaustively with coexistence of the mixtures of cation and anion exchange resins. These results demonstrate that the colloidal crystallization takes place by the extended electrical double layers formed around the gel spheres in addition of the excluded volume effect of the gels. Extent of the contribution of the electrical double layers on the crystallization increased sharply when the degree of cross-linking increased, the gel spheres shrank, and/or the density of the gel spheres increased.     

Colloidal crystallization of thermo-sensitive gel spheres of poly (<Emphasis Type="Italic">N</Emphasis>-isopropyl acrylamide)

Morphology, phase diagram, and reflection spectroscopy of the colloidal crystals of thermo-sensitive gel spheres, poly (N-isopropylacrylamide) (224 nm in the hydrodynamic diameter at 25 °C) were studied. Giant colloidal single crystals formed at very low gel concentrations. Critical concentration of melting of gel spheres (0.8 wt.% without ion-exchange resins) decreased sharply to 0.01 wt.% as the gel suspension was deionized exhaustively with coexistence of the mixtures of cation- and anion-exchange resins and increased substantially as concentration of sodium chloride increased. These studies demonstrated that the colloidal crystallization takes place by the extended electrical double layers formed around the gel spheres in addition of the excluded-volume effect of the gels. Most of the researchers including the authors have believed that the crystallization of the gel spheres takes place by the excluded-volume effect, in other words, by the hard-sphere model, exclusively. However, the present work clarified that the colloidal interfaces, which are inevitable for the formation of the electrical double layers, are formed firmly between the water phase and gel spheres, though the gel spheres contain a lot of water molecules in the inner the sphere region.     

Colloidal crystallization of thermo-sensitive gel spheres of poly (<Emphasis Type="Italic">N</Emphasis>-isopropyl acrylamide). Influence of gel size

Influence of the gel size on the morphology, phase diagram, and reflection spectroscopy of the colloidal crystals of thermo-sensitive gel spheres, poly (N-isopropylacrylamide) (pNIPAm), was discussed by adding the data of two gel samples of pNIPAm(400–5) and pNIPAm(600–5) of 412 nm (at 25 °C) and 220 nm (at 45 °C) and of 517 nm (at 20 °C) and 294 nm (at 45 °C), respectively. Colloidal single crystals formed, but not so large compared with the giant crystals of small pNIPAm gels reported previously. The suspensions even with ion-exchange resins were turbid and hard to observe the single crystals clearly with the naked eyes as gel size increased. The critical concentration of melting decreased sharply as the suspensions were deionized with coexistence of the mixtures of cation- and anion-exchange resins. The critical concentration increased as the gel size increased and/or dispersion temperature increased. Density of the gel spheres increased as their size increased. These results demonstrated that the colloidal crystallization takes place by the extended electrical double layers formed around the gel spheres in addition of the excluded volume effect of the gels. Contribution of the electrical double layers on the crystallization increased sharply as temperature increased and gel concentration decreased, respectively. The contribution also increased slightly as sphere size increased, when comparison was made at the same gel concentration in wt.%. The present work clarified that the colloidal interfaces, which are inevitable for the formation of the electrical double layers, are formed between the water phase and gel spheres, though the gel spheres contain a lot of water molecules at the inner sphere region.     

Drying dissipative structures of cationic gel spheres of lightly cross-linked poly(2-vinylpyridine) in deionized aqueous suspension

Drying dissipative patterns of cationic gel crystals of lightly cross-linked poly(2-vinylpyridine) spheres (CAIBA-P2VP(0.1), CAIBA-P2VP(0.5), and CAIBA-P2VP(1), 107?~?113 nm in diameter and 0.1, 0.5, and 1 in degrees of cross-linking) were observed on a cover glass, a watch glass, and a Petri glass dish. Convectional spoke line and cluster patterns were recognized with the naked eyes, which supports that these poly(2-vinylpyridine) gel spheres aggregate temporarily and reversibly during the course of drying. Two kinds of broad rings were observed at the outside edge and inner region in the macroscopic drying pattern. The size of the inner rings decreased with gel concentration. Formation of similar-sized aggregates (or agglomerates) and their ordered arrays ((a) ordered ring, (b) spoke lines, (c) net structures, and (d) lattice structures) were observed, though the arrays were not so complete compared with those of large-sized analogous gel spheres. One of the main causes of the incomplete ordering of the aggregates is the rather high polydispersities in the sphere size. The ordering of similar-sized aggregates is common among the gel spheres including anionic poly(N-isopropylacrylamide) and cationic poly(2-vinylpyridine). Size effect of cationic gel spheres on the ordering of the agglomerates was clarified definitely in this work. The role of the convectional flow and the electrical double layers around the agglomerates and their interaction with the substrates during drying was also clarified to be very important for the drying pattern formation.     

Drying dissipative structures of thermo-sensitive gel spheres of poly(N-isopropylacrylamide). Influence of degree of cross-linking of the gels

Drying dissipative patterns of de-ionized suspensions (colloidal crystal state above the critical concentrations of crystallization) of the thermo-sensitive gels of poly(N-isopropylacrylamide) with degrees of cross-linking of 10% and 2% (pNIPAm(200–10) and pNIPAm(200–2)) were observed at 20?°C and 45?°C on a cover glass, a watch glass, and a Petri glass dish. The broad rings were observed, and their size decreased as micro-gel concentration decreased. Formation of the monodispersed agglomerated particles and their ordered arrays were observed. Microscopic drying structures of (a) flickering ordered spoke-lines, (b) ordered rings, (c) net structure, and (d) lattice-like ordered structures of the agglomerated particles are observed. The net and lattice structures formed more favorably at high degrees of cross-linking, at high concentrations of the gels, and/or high temperatures. By the addition of sodium chloride, very large dendrite-like and net structures of the large agglomerated particles formed at 20?°C and 45?°C, respectively. Importance of the cooperated convectional flow of the agglomerated particles during the drying processes is supported for the ordered array formation. The role of the electrical double layers around the agglomerated particles and the interaction of the particles with the substrate surfaces during dryness are also important for the ordering. The microscopic drying patterns of gel spheres were different from those of linear type polymers and also from typical colloidal spheres, though the macroscopic patterns of gel system such as broad ring formation at the edges of the dried film were similar to other two systems.     

Colloidal crystallization of spindle-shaped hematite particles coated with polymer brush in deionized aqueous suspension

Colloidal crystallization of highly monodisperse spindle-shaped hematite particles coated with poly(poly(ethylene oxide) methyl ether methacrylate) brush (SHB) was studied by reflection spectroscopy and optical microscopy. SHB suspensions were deionized exhaustively with the mixtures of cation- and anion-exchange resins more than 6 months. The liquid thin film along the vertical cell wall above the horizontal air–liquid interface showed the strong color bands. Furthermore, the reflection spectra composed of many sharp peaks shifted continuously toward shorter wavelengths with time. These observations support the presence of thin film of SHB suspension, where the width is thickened downward by the gravity and the layered liquid further flow downward with time. The rigidities of SHB crystals in the bulk phase estimated from the optical microscopy in the sedimentation equilibrium were 0.007 to 0.7 Pa as SHB concentration increased from 0.006 to 0.35 wt.%. The fluctuation parameter, b-factors of the anisotropic crystals, was from 0.025 to 0.035 and decreased slightly as particle concentration increased. Rigidities and the fluctuation parameters of SHB suspensions support that the elastic properties of the anisotropic-shaped colloidal crystals are close to those of typical crystals of colloidal spheres. Compression of the SHB crystals by the gravity is also suggested in the sedimentation equilibrium state.     

Colloidal crystallization of poly(n-butyl acrylate) spheres in deionized aqueous suspension and the melting during dryness

Colloidal crystallization of poly(n-butyl acrylate) spheres (ammonium persulfate-poly(n-butyl acrylate) (APS-PBA), 320?±?50 nm in diameter) was studied in deionized aqueous suspension. Coexistence of the crystal and distorted crystal structures was observed by the reflection spectroscopy. The critical concentrations of melting were ca. 0.01 and 0.03 in volume fraction in the presence of ion-exchange resins and in their absence, respectively. Crystal structures melted away during dryness by fusion of each spheres on the substrates, i.e., cover glass, watch glass, and Petri glass dish. Thickness profiles of the dried film changed sharply from the broad ring to the round hill as sphere concentration increased. The sharpness parameter S was evaluated from the ratio of the film size (diameter) against the full width at half maximum in the thickness profiles of the ring and/or the round hill. The S values decreased sharply from 30 to 1.2 as initial volume fraction of the spheres increased from 0.0005 to 0.1. The S values were significantly low compared with those of typical colloidal spheres, which supports the aggregate and/or fusion of the spheres resulting in their low convectional flow during dryness. The round hill profile at the high sphere concentration also supports that the fusion takes place easier during dryness. Microscopic observation of the dried film supports the formation of the homogeneous fused structures. It was clarified that colloidal crystallization of APS-PBA spheres takes place by the extended electrical double layers around the spheres like typical colloidal crystals of hard spheres. However, APS-PBA spheres are not so stable by the fusion especially at the high sphere concentrations and on the substrates.     

Drying dissipative structures of cationic gel spheres of lightly cross-linked poly(2-vinyl pyridine) (170 ∼ 180 nm in diameter) in the deionized aqueous suspension

Drying dissipative patterns of cationic gel crystals of lightly cross-linked poly(2-vinyl pyridine) spheres (AIBA-P2VP, 170?～?180 nm in diameter) were observed on a cover glass, a watch glass, and a Petri glass dish. Convectional patterns were recognized with the naked eyes. Two kinds of the broad rings were observed at the outside edge and inner region in the macroscopic drying pattern, and their size at the inner regions first decreased and then turned to increase as gel concentration decreased. Formation of the similar-sized aggregates, i.e., hierarchical aggregation and their ordered arrays were observed. This work supported strongly the formation of the microscopic drying structures of (a) ordered rings, (b) flickering ordered spoke-lines, (c) net structure, and (d) lattice-like ordered structures of the aggregated particles. The ordering of the similar-sized aggregates of the cationic gel spheres (AIBA-P2VP) in this work is similar to that of the large cationic gel spheres of poly(2-vinyl pyridine) (385?～?400 nm in diameter) and further to that of the anionic thermosensitive gel spheres of poly(N-isopropyl acrylamide). Role of the electrical double layers around the aggregates and their interaction with the substrates during dryness are important for the ordering. The microscopic drying patterns of gel spheres were different from those of linear-type polymers and also from typical colloidal hard spheres, though the macroscopic patterns such as broad ring formation were similar to each other.     

Chitosan-Pectin Composite Gel Spheres: Effect of Some Formulation Variables on Drug Release

Chitosan-pectin composite gel spheres were prepared by ionotropic gelation method. Pectin solution containing indomethacin, a model drug, was extruded into a mixture of chitosan and calcium chloride. The release behavior of indomethacin from composite gel spheres was investigated in-vitro. The influence of factors affecting release behavior, such as type of pectin, molecular weight of chitosan, cross-linking time and release medium, were discussed in this study. Adding chitosan into gelation medium could retard the release of indomethacin from gel spheres. The different type of pectin used demonstrated slightly different drug release profiles. The higher molecular weight of chitosan showed less indomethacin release than the lower one. The increased cross-linking time slowed the drug release from composite gel spheres. The release of indomethacin from composite gel spheres was also dependent on the release medium. The drug release was slower in tris buffer where no phosphate ions which can induce the precipitation of calcium phosphate. The results suggested that the composite gel spheres of pectin and chitosan could be used as a controlled release drug delivery carrier.     

Drying dissipative structures of thermosensitive gel spheres of poly (N-isopropylacrylamide). Influence of gel size

Drying dissipative patterns of de-ionized suspensions (colloidal crystal-state at high concentrations) of the thermosensitive gels of poly (N-isopropylacrylamide) with various sizes (ca. 400–1,500?nm in diameter at 20?°C) were observed at 20 and 45?°C on a cover glass, a watch glass, and a Petri glass dish. The broad rings were observed and their size decreased as gel concentration decreased. Formation of the monodispersed agglomerated particles and their ordered arrays were observed irrespective of gel size. The macroscopic flickering spoke-like patterns were observed for the gel spheres from 70 to 600?nm in diameter at 20?°C, but almost disappeared for extremely large spheres, poly(N-isopropylacrylamide)(1500-5). This work clarified the formation of the drying microscopic structures of (a) ordered rings, (b) flickering ordered spoke lines, (c) net structure, and (d) lattice-like ordered structures of the agglomerated particles. The ordered rings became rather vague as gel size increased. The large net structures formed so often for large gels. Size effect on the lattice patterns was not recognized so clearly. The role of the electrical double layers around the agglomerated particles and the interaction of the particles with the substrate surfaces during dryness are important for the ordering. The microscopic drying patterns of gel spheres were quite different from those of linear type polymers and also from typical colloidal hard spheres, though the macroscopic patterns such as broad ring formation at the edges of the dried film were similar to each other.     

Drying dissipative structures of lightly cross-linked poly(2-vinyl pyridine) cationic gel spheres stabilized with poly(ethylene glycol) in the deionized aqueous suspension

Drying dissipative patterns of deionized and colloidal crystal-state suspensions of the cationic gel spheres of lightly cross-linked poly(2-vinyl pyridine) stabilized with poly(ethylene glycol) were observed on a cover glass, a watch glass, and a Petri glass dish. Convectional patterns were recognized with the naked eyes. The broad rings were observed in the drying pattern and their size and width decreased as gel concentration decreased. Formation of the monodispersed agglomerated particles and their ordered arrays were observed. This work clarified the formation of the drying microscopic structures of (a) ordered rings, (b) flickering ordered spoke-lines, (c) net structure, and (d) lattice-like ordered structures of the agglomerated particles. The ordering of the agglomerated particles of the cationic gel spheres is similar to that of the anionic thermo-sensitive gel spheres of poly(N-isopropyl acrylamide). The role of the electrical double layers around the agglomerated particles and the interaction of the particles with the substrates during dryness are important for the ordering. The microscopic drying patterns of gel spheres were different from those of linear-type polymers and also from typical colloidal hard spheres, though the macroscopic patterns such as broad ring formation at the edges were similar to each other. The addition of sodium chloride shifted the microscopic patterns from lattice to net structures.     

Drying dissipative structures of thermo-sensitive gel spheres of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide)

Drying dissipative patterns were observed at 25 °C, 33 °C, and 45 °C on a cover glass, a watch glass, and a Petri glass dish during the course of dryness of colloidal crystals of the thermo-sensitive gels of poly(N-isopropylacrylamide) (PNIPA). Two kinds of broad rings, i.e., transparent ring at the outside edge and the ring in the inner area from the edge, were observed. Sizes of the former were the same as those of the initial liquids irrespective of gel concentration, whereas sizes of the latter decreased as gel concentration decreased. These broad rings were composed mainly of the monomeric and the agglomerated gel particles, respectively. Formation of the monodispersed agglomerated particles and their ordered arrays in the inner area of the dried film were observed especially on a Petri glass dish and a watch glass. The important role of the electrical double layers formed around the agglomerated particles is supported for the ordering of the agglomerated particles. The essential differences in the drying patterns between PNIPA gel spheres and the typical colloidal particles did not appear.     

Drying dissipative patterns of colloidal crystals of silica spheres on a cover glass at the regulated temperature and humidity

Influences of temperature and humidity on the drying dissipative patterns of colloidal crystals of silica spheres (103 nm in diameter) were studied. The broad ring pattern, which is one of the typical macroscopic drying structures, became sharp as temperature rose and/or humidity decreased. Furthermore, number of the spoke-like cracks decreased as temperature and/or humidity increased. The water evaporation from a liquid surface to air and the convectional flow of water and colloidal spheres were important for the macroscopic pattern formation.     

Drying dissipative structures of thermo-sensitive gel spheres of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) with low degree of cross-linking

Drying dissipative patterns of deionized suspensions (colloidal crystal state at high concentrations) of the thermo-sensitive gels of poly(N-isopropylacrylamide) with low degree of cross-linking of 0.5% (318 nm and 116 nm in the hydrodynamic diameter at 25 °C and 45 °C) were observed at 20 °C and 45 °C on a cover glass, a watch glass and a Petri glass dish. The broad rings were observed and their size decreased as micro-gel concentration decreased. Formation of the monodispersed agglomerated particles and their ordered arrays were observed. This work clarified the formation of the drying microscopic structures of (a) flickering ordered spoke-lines, (b) ordered rings, (c) net structure, and finally (d) lattice-like ordered structures of the agglomerated particles. The net and lattice structures formed more favorably at higher temperatures and/or higher degree of cross-linking of the gels. Importance of the convectional flow of the agglomerated particles during the drying processes is supported for the ordered array formation. The role of the electrical double layers around the agglomerated particles and the interaction of the particles with the substrate surfaces during dryness are also important for the ordering. The microscopic drying patterns of gel spheres were quite different from those of linear-type polymers and also from typical colloidal spheres, though the macroscopic patterns such as broad ring formation at the edges of the dried film were similar to each other.