Stability of chromium dioxide particles in aqueous media

An investigation was carried out to characterize the dissolution behavior of stabilized and unstabilized CrO₂ particles in water, used in magnetic recording. Special attention was paid to the measurement of Cr(VI) concentration in the contact solution and to the elucidation of the effects of the stabilizing treatment by x-ray photoelectron spectroscopy (XPS). The experimental results indicate that both stabilized and unstabilized CrO₂ particles predominantly release hexavalent chromium when in contact with water. The solubility of freshly stabilized CrO₂ is considerably smaller than that of unstabilized CrO₂, but the difference in solubility diminishes with aged particles. The XPS study indicated that stabilization of CrO₂ particles with a bisulfite solution results in the formation of Cr₂O₃ or a Cr₂O₃-like product on the particle. However, it appears that Cr(III) oxide coating does not uniformly form on all particles.     

Hydrogen peroxide oxidation of hydrocarbons catalyzed by Cr(VI) oxo compounds

>CrO₃, (NBu₄)₂CrO₄, (NBu₄)₂Cr₂O₇, and (NBu₄)Cr₄O₁₃ catalyze the hydrogen peroxide oxidation of cyclohexane, ethylbenzene, and styrene in acetonitrile. The active species is apparently a Cr(VI) peroxo complex.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 210–211, January, 1990.     

Spectral studies on the reaction of chromium (VI) compounds with aminophosphonic esters

The studies on reaction of newly obtained aminophosphonic acid diethyl ester derivatives of fluorene with Cr₂O₇ ^2–, CrO₄ ^2–, CrO₃Cl^– and CrO₃ have been investigated using electronic, infrared,Raman and NMR spectral methods. It has been found that the resulting compounds are of the type (AH)₂Cr₂O₇, whereA stands for the organic part of the molecule. The organic cation and solvent effects on the electronic states of pseudotetrahedrally arranged Cr(VI) anions are discussed.

---

Spektroskopische Untersuchungen über Reaktionen von Chrom(VI)-Verbindungen mit Aminophosphonsäure-Estern

Zusammenfassung Es wurden Elektronen-, Ultrarot-,Raman- und NMR-spektroskopische Untersuchungen beschrieben, die an neuen Verbindungen durchgeführt wurden, welche als Reaktionsprodukte von Cr₂O₇ ^2–, CrO₄ ^2–, CrO₃Cl^– und CrO₃ mit Aminophosphonsäurediethylesterderivaten von Fluorene synthetisiert worden waren. Es wurde festgestellt, daß diese Verbindungen mit einer allgemeinen Formel (AH)₂Cr₂O₇ beschrieben können werden, in derA den organischen Teil der Verbindungen bedeutet. Der Einfluß des organischen Kations wie auch der von Lösungsmitteln auf die Elektronenzustände des pseudotetraedrischen Cr(VI)-Anions wurde gleichfalls untersucht.

     

Microcalorimetric Study on Effect of Chromium(III) and Chromium(VI) Species on the Growth of Escherichia coli

The effects of Cr(III) and Cr(VI) species (Cr₂O₇^2?, CrO₄^2? and Cr³⁺) on the growth of Escherichia coli (E. coli) have been investigated in detail by microcalorimetry at 37 °C. Parameters including the growth rate constant (k), inhibitory ratio (I), half‐inhibitory concentration (IC₅₀), total heat output (Q_total), time of the maximum heat production (t_log) in the log phase have been obtained. The results showed that Cr(VI) and Cr(III) had the inhibition effect on the growth of E. coli in aquatic environment; however, the inhibitory ratio of Cr(III) to E. coli was smaller than that of Cr(VI). The k values of E. coli in the presence of Cr(VI) and at high concentrations of Cr(III) were decreased with increasing the concentrations of these chromium species. Among the three chromium species investigated, Cr₂O₇^2? was found to be the most poisonous species against E. coli with an IC₅₀ value of 35.52 µg·mL^?1. CrO₄^2? exhibited moderate toxicity on E. coli with an IC₅₀ of 50.24 µg·mL^?1, and Cr³⁺ had the lowest toxicity with an IC₅₀ of 84.30 µg·mL^?1. Microcalorimetry can provide a convenient, sensitive and reliable method to study the effect of various metal species on the growth of bacteria or other microorganisms.     

Thermal characterization and compatibility studies of perovskite-type Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) oxide with Cr2O3 at high temperature

The chemical compatibility of perovskite-type Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ (BSCF) oxides with Cr₂O₃ has been examined between room temperature and 1,100 °C. Differential thermal analysis and thermogravimetric analysis were used to analyze the thermal behavior of BSCF–Cr₂O₃ binary mixtures in all composition ranges (0–100 mass% BSCF). The reaction products were identified by X-ray analysis after heating at 700–1,100 °C. As we expected, it was found that perovskite-type BSCF oxide had a poor chemical compatibility with the Cr₂O₃ oxide. In particular, the decomposition process of the BSCF–Cr₂O₃ binary mixture is quite complex and it starts at about 700–750 °C. The mixtures of BSCF and Cr₂O₃ oxides reacted forming mixed complex oxides based on (Ba/Sr)FeO₃, (Co/Fe)CrO₄, and (Ba/Sr)CrO₄ mixtures.     

Evaluation of cation influence on the formation of M(II)Cr2O4 during the thermal decomposition of mixed carboxylate type precursors

This paper reports an investigation regarding the influence of the cation M(II) (M = Zn, Ni, Mg) on the formation of MCr₂O₄ by thermal decomposition of the corresponding M(II),Cr(III)-carboxylates (precursors) obtained by redox reaction between the corresponding metal nitrates and 1,3-propanediol. The decomposition products at different temperatures have been characterized by FT-IR spectroscopy and thermal analysis. Thus, we have evidenced that by thermal decomposition of the studied precursors in the range 250–300 °C, different amorphous oxidic phases mixtures form depending on the nature of metalic cation: (Cr₂O_3+x + ZnO) (Cr₂O_3+x + Ni/NiO) and (Cr₂O_3+x+MgO). In case of M = Zn, around 400 °C when the transition Cr₂O_3+x to Cr₂O₃ takes place, zinc chromite nuclei form by the interaction ZnO with Cr₂O₃. In case of M = Ni, due to the partial reduction of Ni(II) at Ni(0) during the thermal decomposition of the precursor the formation of nickel chromite by the reaction NiO + Cr₂O₃ is shifted toward 500 °C, when Ni is oxidized at NiO. The thermal evolution of the mixture (MgO + CrO₃) is different due to the formation as intermediary phase of MgCrO₄, which decomposes to MgCr₂O₄ around 560 °C. In order to investigate the chromites formation mechanism, we have studied the mechanical mixtures of single oxides obtained from the corresponding carboxylates. These mixtures (MO + Cr₂O₃) have been annealed at 400, 500, and 600 °C to study the evolution of the crystalline phases. It results in the prepared mixture behaving different from the mixtures obtained by thermal decomposition of the binary M(II),Cr(III)-carboxylates, recommending our synthesis method for obtaining binary oxides.     

Simultaneous, sensitive and selective on-line chemiluminescence determination of Cr(III) and Cr(VI) by capillary electrophoresis

A novel in-capillary reduction and capillary electrophoretic (CE)-chemiluminescence (CL) method was developed for the sensitive and selective determination of chromium(III) and chromium(VI). The proposed method was based on the in-capillary reduction of Cr(VI) with acidic H₂O₂ to form Cr(III) using the zone-passing technique and chemiluminescence detection of Cr(III). The sample [Cr³⁺ and CrO₄²⁻], hydrochloric acid, and H₂O₂ (reductant) solution segments were injected for specified periods of time in this order from the anodic end of a capillary, followed by application of an appropriate running voltage between both ends. As both chromium species have opposite charges, Cr³⁺ migrates to the cathode while CrO₄²⁻ ion, moving oppositely to the anode, reacts with acidic H₂O_2, resulted in formation of Cr³⁺. Based on the migration time difference of both Cr³⁺ ions, they were separated by zone electrophoresis. Running buffer was composed of 0.02 mol l⁻¹ HAc-NaAc (pH 4.7) with 1×10⁻³ mol l⁻¹ EDTA. Parameters affecting CE-CL separation and detection, such as reductant concentration, mixing mode of the analytes with CL reagent, CL reaction reagent pH and concentration, stability of luminol-hydrogen peroxide mixed solution were optimized. The limits of detection for chromium(III) and chromium(VI) (3σ) were 6×10⁻¹³ mol l⁻¹ (mass concentration 12 zmol) and 8×10⁻¹² mol l⁻¹ (160 zmol), respectively. This method offered potential advantages of simplicity, sensitivity, selectivity and applicability to the determination of Cr(III) and Cr(VI) in environmental water.     

Application of polyaniline/bacterial extracellular polysaccharide nanocomposite for removal and detoxification of Cr(VI)

Polyaniline/bacterial extracellular polysaccharide (Pn/EPS) nanocomposite was prepared by in situ polymerization of aniline using ammonium peroxydisulfate as oxidant. Transmission electron micrograph showed that the surface of the nanocomposite was rough, providing good possibility for adsorption of Cr(VI). Under optimized conditions, the nanocomposite removed 97.3 % (25 mg L^?1) of Cr(VI) from aqueous solution. The Freundlich isotherm model and pseudo-first order rate expression better described the adsorption equilibrium of Pn/EPS nanocomposite. X-ray diffractogram peak for Cr₂O₃ (2θ = 24.5) in the nanocomposite confirmed the reduction of Cr(VI). Fourier transform infrared spectroscopy pattern of the nanocomposite confirmed the ionic interaction between Cr species and surface functional groups. The results of the study indicate that Pn/EPS nanocomposite could be used for the removal and detoxification of Cr(VI) from aqueous solution.     

The obtaining of NiCr2O4 nanoparticles by unconventional synthesis methods

This paper presents a study regarding the obtaining of NiCr₂O₄ by two new unconventional synthesis methods: (i) the first method is based on the formation of Cr(III) and Ni(II) carboxylate-type precursors in the redox reaction between the nitrate ion and 1,3-propanediol. The thermal decomposition of these complex combinations, at ~300 °C, leads to an oxide mixture of Cr₂O_3+x and NiO, with advanced homogeneity, small particles and high reactivity. On heating this mixture at 500 °C, Cr₂O₃ reacts with NiO to form NiCr₂O₄, which was evidenced by FT-IR and X-ray diffractometry (XRD) analysis; (ii) the second method starts from a mechanical mixture of (NH₄)₂Cr₂O₇ and Ni(NO₃)₂·6H₂O. On heating this mixture, a violent decomposition at 240 °C with formation of an oxides mixture (Cr₂O₃ + CrO₃) and NiO takes place. On thermal treatment up to 500 °C, an intermediary phase NiCrO₄ is formed, which by decomposition at ~700 °C leads to NiCr₂O₄, evidenced by FT-IR and XRD analysis. NiCr₂O₄ is formed, in both cases, starting with a temperature higher than 400 °C, when the non-stoichiometric chromium oxide (Cr₂O_3+x ) loses the oxygen excess and turns to stoichiometric chromium oxide (Cr₂O₃), which further reacts with NiO.     

X-Ray CrKβ emission and K absorption spectra in mixed copper chromium oxides

The Kβ emission spectra of chromium in oxidic compounds were investigated by means of the fluorescent method. The origin of the main Kβ lines is discussed using MO theory and the dependence of the energy positions on the chemical bond is reported. The compounds studied include the oxides Cr₂O₃ CrO₂ and CrO₃, and the mixed copper chromium oxides CuCrO₂, CuCr₂O₄ and CuCrO₄. High-resolution chromium K-edge absorption spectra have been recorded using the synchroton radiation available at LURE (Orsay, France). The object of this investigation is to obtain further information about the chemical state analysis of chromium in catalysts: an evaluation of the atomic Cr(VI):Cr_total ratio in Cu_xCr_yO₄ catalysts is reported.     

Formation of Cr(II) Species in the H2/CrO3 System. Parameter control

The thermal behaviour of CrO₃ on heating up to 600°C in dynamic atmospheres of air, N₂ and H₂ was examined by thermogravimetry (TG), differential thermal analysis (DTA), IR spectroscopy and diffuse reflectance spectroscopy (DRS). The results revealed three major thermal events, depending to different extents on the surrounding atmosphere: (i) melting of CrO₃ near 215°C (independent of the atmosphere), (ii) decomposition into Cr₂(CrO₄)₃ at 340–360°C (insignificantly dependent), and (iii) decomposition of the chromate into Cr₂O₃ at 415–490°C (significantly dependent). The decomposition CrO₃ → Cr₂(CrO₄)₃ is largely thermal and involves exothermic deoxygenation and polymerization reactions, whereas the decomposition Cr₂(CrO₄)₃ → Cr₂O₃ involves endothermic reductive deoxygenation reactions in air (or N₂) which are greatly accelerated and rendered exothermic in the presence of H₂. TG measurements as a function of heating rate (2–50°C min⁻¹) demonstrated the acceleratory role of H₂, which extended to the formation of Cr(II) species. This could sustain a mechanism whereby H₂ molecules are considered to chemisorb dissociatively, and then spillover to induce the reduction. DTA measurements as a function of the heating rate (2–50°C min⁻¹) helped in the derivation of non-isothermal kinetic parameters strongly supportive of the mechanism envisaged. This revised version was published online in August 2006 with corrections to the Cover Date.     

Catalytic activity and physicochemical properties of Ni-Au/Al<Subscript>3</Subscript>CrO<Subscript>6</Subscript> system for partial oxidation of methane to synthesis gas

This work is focused on the role of gold and Al₃CrO₆ support for physicochemical properties, and catalytic activity of supported nickel catalysts in partial oxidation of methane (POM). Catalysts, containing 5% Ni and 5% Ni-2% Au active phases dispersed on mono- (Al₂O₃, Cr₂O₃) and bi-oxide Al₃CrO₆ support, were investigated by TPR, BET and XRD methods, and the activity tests in POM reaction were carried out. Bimetallic Ni-Au catalysts dispersed on Al₃CrO₆ support remained highly stable and active. The amorphous binary oxide Al₃CrO₆ can stabilize considerable amount of Cr⁴⁺, Cr⁵⁺, and Cr⁶⁺ species in Ni-Au/Al₃CrO₆ catalyst network during its calcination in the air. Nickel supported on binary oxide Ni/Al₃CrO₆ can form Ni(III)CrO₃ bi-oxide phase in reductive conditions. During TPR H2 reduction of Ni-Au/Al₃CrO₆ catalyst chromium(II) oxide Cr(II)O phase is observed. After POM reaction the existence of bimetallic Au-Ni alloy was experimentally confirmed on mono-oxide Al₂O₃ support surface, but its formation was not identified on bioxide Al₃CrO₆ support. Published in Russian in Kinetika i Kataliz, 2009, Vol. 50, No. 1, pp. 149–156. The article is published in the original. Based on a report at the VII Russ. Conf. on Mechanisms of Catalytic Reactions (with international participation), St. Petersburg, July 2–8, 2006.     

Oxidation in vitro of chromium(III) dietary supplements <Emphasis Type="Italic">mer</Emphasis>-[Cr(pic)<Subscript>3</Subscript>] and <Emphasis Type="Italic">trans</Emphasis>(S,S)-[Cr(Cys)<Subscript>2</Subscript>]<Superscript>−</Superscript> by hydrogen peroxide

Biological tests performed using 3T3 fibroblasts indicated low cytotoxicities for the complexes mer-[Cr(pic)₃] and trans(S,S)-[Cr(Cys)₂]^?, where pic = picolinate anion and Cys = cysteine. Oxidation of these complexes by hydrogen peroxide was studied in NaOH and NaHCO₃ media. Electronic (UV–Vis) and EPR spectroscopies were used to monitor the reaction course. Hydrogen peroxide oxidizes chromium(III) to both [Cr^V(O₂)₄]^3? and Cr^VIO₄ ^2? anions in alkaline media and practically completely to CrO₄ ^2? anion in bicarbonate solution. The reactions follow consecutive biphasic or simple first-order kinetics. The first-order decay of [Cr^V(O₂)₄]^3? anion at pH ≈ 8 was followed by EPR spectroscopy. Based on the obtained kinetic and spectroscopic data, mechanisms for the redox transformations of these chromium(III) complexes are proposed.     

Blood Levels of Hexavalent Chromium in Rats. “In Vitro” and “In Vivo” Experiments

Abstract

For the Cr(VI) selective separation from biological materials we have developed a highly rapid extraction-separation method with liquid anion exchanger as Amberlite LA-1 or LA-2. The analytical determination of Cr(VI) in organic phase was carried out using electrothermal atomic absorption spectroscopy (ETA-AAS).

After i.v. administration of 0.5 and 2.5mg/kg b.w. of K₂Cr₂O₇ in male Wistar rats the biological samples, collected at different times, were immediately analyzed. Cr(VI) was not detected in whole blood one minute after administration of the lower dose. In blood of rats receiving higher dose an incomplete reduction of Cr(VI) was observed.

Such data demonstrate a highly rapid but limited metabolic capacity of hematic compartment to reduce Cr(VI) to trivalent status.

These results obtained with a new and specific analytical method, confirmed a trigger role of red cells in Cr(VI) metabolism.

“In vitro” incubation of K₂Cr₂O₇ (4 μM) with rat erythrocytes or plasma at 37°C showed a rapid reduction of Cr(VI) in red cells while plasma samples demonstrated a limited reductive power.     

Cs2Cr4O13: a new structure type among alkali tetrachromates

Dicaesium tetrachromium(VI) tridecaoxide, Cs₂Cr₄O₁₃, contains finite [Cr₄O₁₃]²⁻ anions composed of four corner‐linked CrO₄ tetrahedra. These anions are linked by Cs⁺ cations whose Cs—O bond lengths range between 3.015 (2) and ∼3.7 Å. Although Cs₂Cr₄O₁₃ is not isotypic with its NH₄, K or Rb analogs, the [Cr₄O₁₃]²⁻ anions in all these compounds exhibit a similar zigzag‐like geometry.     

The influence of addition of silver and copper on the reducibility of CrAl<Subscript>3</Subscript>O<Subscript>6</Subscript> system

The influence of addition of silver and copper on the reduction behavior of binary oxide CrAl₃O₆ was investigated. The formation of copper chromite CuCr₂O₄ and silver chromate Ag₂CrO₄ during calcinations process was observed. The intermediate phase CrO was detected when copper and silver-copper systems were reduced at temperatures above 500°C. This intermediate is formed from Cr₂O₃, which is yielded by the initial reduction of Cr₂O₄²⁻ species.     

Bidentate reagents form cyclic organic-Cr(VI) molecules for aiding in the removal of Cr(VI) from water: density functional theory and experimental results

Hexavalent chromium, Cr(VI), in the form of chromate (CrO₄ ^2?) or dichromate (Cr₂O₇ ^2?) is a well-described carcinogen found in the drinking water in many parts of the country at levels deemed unsafe by the U.S. Environmental Protection Agency and the World Health Organization. We report on the ability of bidentate organic molecules containing diols or diamines to capture chromate ions from aqueous sources by forming cyclic organic-Cr(VI) carbonates or ureas. After their formation, the cyclic organic-Cr(VI) molecules are readily absorbed onto granulated activated charcoal to facilitate Cr(VI) removal. Using density functional theory, E ₀ values for the reactions of diols and diamines with chromate were calculated and correlated with the experimental findings of Cr(VI) removal.     

Thermolysis mechanism of chromium nitrate nonahydrate and computerized modeling of intermediate products

Thermal decomposition of chromium nitrate nonahydrate was studied by thermal analysis, differential scanning calorimetry, infrared spectroscopy, and high temperature X-ray diffraction, so that mass losses were related to the exactly coincident endothermic effects and vibrational energy levels of the evolved gases. The thermal decomposition of chromium nitrate is a complex process, which begins with the simultaneous dehydration and concurrent condensation of 4 mol of the initial monomer Cr(NO₃)₃·9H₂O. Soon after that, the resulting product Cr₄N₁₂O₃₆·31H₂O gradually loses water and azeotrope HNO₃ + H₂O, and is transformed into tetrameric oxynitrate Cr₄N₄O₁₆. At higher temperatures, the tetramer loses N₂O₃ and O₂ and a simultaneous oxidation of Cr(III) to Cr(IV) occurs. The resulting composition at this stage is chromium dioxide dimer Cr₄O₈. Finally, at 447 °C the unstable dimer loses oxygen and is transformed into 2Cr₂O₃. The models of intermediate amorphous compounds represent a reasonably good approximation to the real structures and a proper interpretation of experimental data.     

Kryometrische Untersuchungen. IV. Lösungen von oxidischen Mo6+- und Cr6+-Verbindungen in geschmolzenem K2Cr2O7 und KNO3

The depression of freezing point of molten K₂Cr₂O₇ and KNO₃ as solvents was measured after addition of small concentrations of the following compounds: to K₂Cr₂O₇: MoO₃, CrO₃, (NH₄)₂CrO₄, K₂MoO₄, Na₂MoO₄, Li₂MoO₄, and Na₂Mo₂O₇, respectively; to KNO₃: CrO₃, (NH₄)₂Cr₂O₇ K₂Cr₂O₇, K₂CrO₄ and MoO₃, (NH₄)₆(Mo₇O₂₄) · 4 H₂O, K₂Mo₂O₇, K₂MoO₄, Na₂MoO₄ and Li₂MoO₄, respectively. It could be concluded from the measured values of the freezing point depression if a reaction between solvent and solute took place.