New particle-loaded monoliths for chiral capillary electrochromatographic separation

Fritless particle-loaded monoliths for chiral capillary electrochromatographic (CEC) separation were prepared. Silica particles containing a chiral selector are suspended in a monomer solution, which is drawn into the capillary followed by in situ polymerization. Thereby the silica-based particles containing the chiral selector are embedded in a nonchiral continuous bed. This kind of chiral stationary phase is inexpensive, easy, and reproducible to prepare and circumvents the preparation of frits. As a model, teicoplanin aglycone as chiral selector bonded to 3 microm silica particles was used. The applicability of this approach is demonstrated by means of the chiral separation of aliphatic and aromatic amino acids and dipeptides. As a further application, the chiral selector ristocetin A bonded to 3 microm silica particles was used for the enantiomeric separation of chiral alpha-hydroxy acids. Since alpha-hydroxy acids migrate toward the anode, a cationic charge-providing agent was copolymerized with the matrix. This served to reverse the direction of the electroosmatic flow (EOF).     

Monolithic silica-based capillary column with strong chiral cation-exchange type surface modification for enantioselective non-aqueous capillary electrochromatography

A silica-based monolithic stationary phase prepared by the sol-gel process in a 100 microm I.D. fused-silica (FS) capillary has been modified chemically with 3-mercaptopropyl trimethoxysilane followed by immobilization of a strong cation-exchange (SCX) type chiral selector, (S)-N-(4-allyloxy-3,5-dichlorobenzoyl)-2-amino-3,3-dimethylbutane phosphonic acid, by radical addition reaction onto the reactive sulfhydryl surface. After a fine-tuning of the mobile phase composition, the enantioselective capillary column was evaluated for the separation of various chiral basic drugs by enantioselective non-aqueous capillary electrochromatography (CEC), in comparison to capillary column analogs packed with 3.5 microm silica particles having attached the same selector. The performance of the monolithic silica column was further compared to corresponding polymethacrylate-based organic polymer monoliths. The study indicated that strong counter-ions such as 2-aminobutanol or N,N,N',N'-tetramethylethylenediamine are needed, although they reduce the electroosmotic flow velocity and separation factors in comparison to less efficient counter-ions, in order to allow the elution of the oppositely charged solutes in the ion-exchange retention mode within reasonable run time and as sharp zones. In contrast, weak counter-ions such as N,N-diisopropylethylamine (Huenig base) provided stronger electroosmotic flow and much better separation factors, but relatively poor peak efficiencies. Overall, with the chemically functionalized monolithic silica column the high quality separations of packed column analogs could be approximated, with regards to both separation factors and peak performances. On the other hand, the monolithic capillary column certainly outperformed the packed column in terms of system robustness under capillary electrochromatography conditions and showed excellent column longevity. The enantioselective strong cation-exchange-type monolithic silica column performed also well in comparison to the organic polymer monolith.     

High-performance liquid chromatographic enantioseparations on capillary columns containing monolithic silica modified with cellulose tris(3,5-dimethylphenylcarbamate)

Monolithic capillary columns containing native silica gel were modified with cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC) and used for enantioseparations in capillary liquid chromatography. The method adopted for in situ enantioselective modification of monolithic fused silica capillary columns by coating with CDPMC appears to be fairly simple and fast. High efficiency enantioseparations of test racemic compounds and s(everal chiral drugs were achieved in a short time. It was possible to increase the amount of chiral selector present by multiple coating of monoliths with CDMPC. The baseline enantioseparation of 2,2,2-trifluoro-1-(9-anthryl)ethanol was achieved in an analysis time less than 30 s with this capillary column. In addition, reproducible enantioseparations were obtained when the chiral selector was removed from the monolithic column by flushing it with appropriate solvent and the column recoated.     

New silica gel-based monolithic column for nano-liquid chromatography, used in the HILIC mode

This paper describes the synthesis and chromatographic and morphologic characterization of two monolithic silica nano-columns (50 μm i.d.) prepared by sol-gel processes, using hydrophilic interaction (HILIC) mode separations to evaluate their performance. Two types of monoliths were prepared by varying the precursors (tetraethoxysilane or a tetraethoxysilane-methyltrimethoxysilane mixture) and by changing the type of catalyst (urea and acetic acid or ammonium hydroxide). The monoliths were characterized by scanning electron microscopy, thermogravimetric analysis, infrared spectroscopy and nitrogen adsorption-desorption isotherms. The columns were tested for the separation of several mixtures, with the organically modified silica (ormosil) column successfully separating two challenging mixtures using HILIC conditions.     

High-performance liquid chromatographic enantioseparations on monolithic silica columns containing a covalently attached 3,5-dimethylphenylcarbamate derivative of cellulose

Covalent immobilization of 3,5-dimethylphenylcarbamate derivative of cellulose was performed in situ onto native silica monoliths cladded in a 50 mm x 4.6 mm polyether ether ketone high-performance liquid chromatographic (HPLC) column. The covalent attachment of cellulose derivative in the range of 16-19% (w/w) was performed via an epoxide moiety. The column obtained by this technique combines the high enantiomer-resolving ability of the polysaccharide derivative with favourable dynamic properties of monolithic HPLC columns. The covalent attachment of the cellulose derivative enables this column to be used in combination with the mobile phases which are incompatible with coated-type polysaccharide columns due to solubility of chiral selector in some organic solvents.     

Modular Thiol–Ene Chemistry Approach towards Mesoporous Silica Monoliths with Organically Modified Pore Walls

The surface modification of mesoporous silica monoliths through thiol–ene chemistry is reported. First, mesoporous silica monoliths with vinyl, allyl, and thiol groups were synthesized through a sol–gel hydrolysis–polycondensation reaction from tetramethyl orthosilicate (TMOS) and vinyltriethoxysilane, allyltriethoxysilane, and (3‐mercaptopropyl)trimethoxysilane, respectively. By variation of the molar ratio of the comonomers TMOS and functional silane, mesoporous silica objects containing different amounts of vinyl, allyl, and thiol groups were obtained. These intermediates can subsequently be derivatized through radical photoaddition reactions either with a thiol or an olefin, depending on the initial pore wall functionality, to yield silica monoliths with different pore‐wall chemistries. Nitrogen sorption, small‐angle X‐ray scattering, solid‐state NMR spectroscopy, elemental analysis, thermogravimetric analysis, and redox titration demonstrate that the synthetic pathway influences the morphology and pore characteristics of the resulting monoliths and also plays a significant role in the efficiency of functionalization. Moreover, the different reactivity of the vinyl and allyl groups on the pore wall affects the addition reaction, and hence, the degree of the pore‐wall functionalization. This report demonstrates that thiol–ene photoaddition reactions are a versatile platform for the generation of a large variety of organically modified silica monoliths with different pore surfaces.     

Silica monoliths templated on L3 liquid crystal

Dimensionally stable, optically clear, highly porous (approximately 65% of the apparent volume), and high surface area (up to 1400 m(2)/g) silica monoliths were fabricated as thick disks (0.5 cm) by templating the isotropic liquid crystalline L(3) phase with silica through the hydrolysis and condensation of a silicon alkoxide and then removing the organic constituents by supercritical ethanol extraction. The L(3) liquid crystal is a stable phase formed by the cosurfactants cetylpyridinium chloride monohydrate and hexanol in HCl(aq) solvent. Extracted 0.5 cm thick disks exhibited a low ratio of scattered to transmitted visible light (1.5 x 10(-)(6) at 22 degrees from the surface normal). The degree of silica condensation in the monoliths was high, as determined by (29)Si NMR measurements of Q(3) and Q(4) peak intensities (0.53 and 0.47, respectively). As a result, the extracted and dried monoliths were mechanically robust and did not fracture when infiltrated by organic solvents. Photoactive liquid monomers were infiltrated into extracted silica monoliths and polymerized in situ, demonstrating the possible application of templated silica to optical storage technology.     

高效液相色谱整体柱在药物分离分析中的应用进展

本文对高效液相整体柱在药物分离分析方面的应用进行了综述.主要介绍了以烷氧基硅烷为主要原料,采用溶胶-凝胶法制备的硅胶整体柱,由于其具有微米级通孔结构和大的比表面积,他们在高效、快速分离小分子物质方面得到广泛地应用.对于聚合物整体柱,主要介绍了包括分子印迹聚合物在内的有机聚合物整体柱在药物分离、生物样品的处理等方面的应用.     

Recent progress in enantiomer separation by capillary electrochromatography

Enantiomer separation by electrochromatography (CEC) can be performed in three modes: (i) open-tubular capillary electrochromatography (o-CEC), in which the chiral selector is physically adsorbed coated, and thermally immobilized or covalently attached to the internal capillary wall; (ii) packed capillary electrochromatography (p-CEC), in which the capillary is either filled with chiral modified silica particles or with an achiral packing material, and a chiral selector is added to the mobile phase; and (iii) monolithic (rod)-capillary electrochromatography (rod-CEC) in which the chiral stationary phase (CSP) consists of a single piece of porous solid. We present an overview on methods and new trends in the field of electrochromatographic enantiomer separation such as CEC with either nonaqueous mobile phases or stationary phases with incorporated permanent charges, or with packing beds consisting of nonporous silica particles or particles with very small internal diameters.     

Porous monolithic materials for extraction and preconcentration of pollutants from environmental waters

This review presents the strengths and weaknesses of monolithic materials for the enrichment of inorganic and organic contaminants in environmental waters. We describe the most common materials (silica, organic, and hybrid organic silica) and strategies for constructing monoliths in different moulds and shapes (tubes, cartridges, stir bars, fibers) published since 2015. The functionalization of the pore surfaces enhances their affinity towards different classes of pollutants. For instance, the incorporation of chelating groups enables the enrichment of potentially toxic metals and semi-metals in aquatic environments before the analyses by spectrometric techniques. Monolithic materials for extracting emerging pollutants, diverse classes of herbicides, and fungicides were proposed recently. Incorporation of carbon-based and magnetic nanoparticles, metal-organic frameworks, and ionic liquids enhanced their adsorption capacity by either increasing the surface area or providing multiple retention mechanisms. Monoliths with molecular recognition properties for highly selective extractions have been synthesized, including boronic functionalities and molecularly imprinted cavities. The final part describes the hybrid organic silica monoliths, emphasizing metal ions and speciation analysis hyphenated with ICP-MS. In the outlook section, we point to some fields we believe monoliths will benefit, such as their 3-D technologies preparation. We also pointed their potential applicability in portable chromatographic systems, restricted access materials, and enhanced use to preconcentrate viruses from aquatic environments.     

Monolith Passive Adsorbers Prepared with Hydrophobic Porous Silica Rods Coated with Hydrogel

This work focuses on the synthesis and characterization of porous silica monolith-based adsorbent materials. Materials with bimodal porosity (macro and meso) were prepared through a sol–gel process. The capacity of adsorption of organic molecules was ensured by grafting of hydrophobic organic coating on the silica surface. Alkylsilane chains or lauryl acrylate polymer were used for this purpose. The adsorption kinetic behavior of the produced materials was assessed through benzophenone adsorption studies in aqueous media. The results have shown that the macropore size of the monoliths had no effect on the adsorption capacity. The thicker organic layer prepared by polymerization of lauryl acrylate has decreased the adsorption kinetics without affecting the total adsorption capacity. The over-coating with additional external layer of hydrogel further slowed the diffusion of benzophenone thus better matches the passive-sampler requirements.     

Hydrophobic polymer monoliths as novel phase separators: Application in continuous liquid–liquid extraction systems

Hydrophobic macroporous polymer monoliths are shown to be interesting materials for the construction of “selective solvent gates”. With the appropriate surface chemistry and porous properties the monoliths can be made permeable only for apolar organic solvents and not for water. Different poly(butyl methacrylate-co-ethylene dimethacrylate) (BMA-EDMA) and poly(styrene-co-divinylbenzene) (PS-DVB) monoliths prepared with tailored chemistries and porosities were evaluated for this purpose. After extensive characterization, the PS-DVB monoliths were selected due to their higher hydrophobicity and their more suitable flow characteristics. BMA-EDMA monoliths are preferred for mid-polarity solvents such as ethyl acetate, for which they provide efficient separation from water. Breakthrough experiments confirmed that the pressures necessary to generate flow of organic solvents through PS-DVB monoliths were substantially lower than for water. A phase separator was constructed using the monoliths as the flow selector. This device was successfully coupled on-line with a chip-based continuous liquid–liquid-extraction (LLE) system with segmented flow. Efficient separation of different solvents was obtained across a wide range of flow rates (0.5–4.0 mL min⁻¹) and aqueous-to-organic flow ratios (β = 1–10). Good robustness and long life-time were also confirmed. The suitability of the device to perform simple, cheap, and reliable phase separation in a continuous LLE system prior to gas-chromatographic analysis was proven for some selected real-life applications.     

Comprehensive pore structure characterization of silica monoliths with controlled mesopore size and macropore size by nitrogen sorption, mercury porosimetry, transmission electron microscopy and inverse size exclusion chromatography

The porosity of monolithic silica columns is measured by using different analytical methods. Two sets of monoliths were prepared with a given mesopore diameter of 10 and 25 nm, respectively and with gradated macropore diameters between 1.8 and 7.5 microm. After preparing the two sets of monolithic silica columns with different macro- and mesopores the internal, external and total porosity of these columns are determined by inverse size-exclusion chromatography (ISEC) using polystyrene samples of narrow molecular size distribution and known average molecular weight. The ISEC data from the 4.6 mm analytical monolithic silica columns are used to determine the structural properties of monolithic silica capillaries (100 microm I.D.) prepared as a third set of samples. The ISEC results illustrate a multimodal mesopore structure (mesopores are pores with stagnant zones) of the monoliths. It is found by ISEC that the ratio of the different types of pores is dependent on the change in diameter of the macropores (serve as flow-through pores). The porosity data achieved from the mercury penetration measurement and nitrogen adsorption as well of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) pictures are correlated with the results we calculated from the ISEC measurements. The ISEC results, namely the multimodal pore structure of the monoliths, reported in several publications, are not confirmed analyzing the pore structures of the different silica monoliths using all other analytical methods.     

Monolithic bed structure for capillary liquid chromatography

Monolithic stationary phases show promise for LC as a result of their good permeability, ease of preparation and broad selectivity. Inorganic silica monoliths have been extensively studied and applied for separation of small molecules. The presence of a large number of through pores and small skeletal structure allows the chromatographic efficiencies of silica monoliths to be comparable to columns packed with 5 μm silica particles, at much lower back pressure. In comparison, organic polymeric monoliths have been mostly used for separation of bio-molecules; however, recently, applications are expanding to small molecules as well. Organic monoliths with high surface areas and fused morphology rather than conventional globular morphology have shown good performance for small molecule separations. Factors such as domain size, through-pore size and mesopore size of the monolithic structures have been found to govern the efficiency of monolithic columns. The structure and performance of monolithic columns are reviewed in comparison to particle packed columns. Studying and characterizing the bed structures of organic monolithic columns can provide great insights into their performance, and aid in structure-directed synthesis of new and improved monoliths.     

Synthesis and characterization of a novel resorcinarene-based stationary phase bearing polar headgroups for use in reversed-phase high-performance liquid chromatography

A novel silica-bonded stationary phase containing a functionalized resorcinarene selector was prepared by a straightforward synthesis. The complete modification of all resorcinic hydroxyl groups was achieved by reaction with isopropyl isocyanate. The derivatized resorcinarene selector was subsequently immobilized via the four alkenyl chains containing a terminal double bond by a free radical-induced reaction on mercaptopropyl-functionalized silica. A comprehensive characterization of the resulting bonded stationary phase was carried out by solid state NMR, IR and elemental analysis. The resulting selector is defined as a "polar headed" reversed phase since the highly ordered polar carbamate groups of the new stationary phase are located, compared to conventional polar embedded stationary phases, at a greater distance from the silica surface. Thus a new concept is introduced in the field of polar modified reversed-phase HPLC. The properties of the novel stationary phase are demonstrated by comparison with commercially available reversed phases.     

Preparation of a polyhedral oligomeric silsesquioxanes hybrid monolith via a single‐step ring‐opening polymerization for pressurized capillary electrochromatography

An organic‐silica hybrid monolith was prepared by a single‐step ring‐opening polymerization of octaglycidyldimethylsilyl polyhedral oligomeric silsesquioxane (POSS‐epoxy), polyethylenimine (PEI), and β‐cyclodextrin (β‐CD) in a ternary porogenic solvent consisting of polyethylene glycol, 1,4‐butanediol, and 1‐propanol. The framework of POSS‐PEI hybrid monolith could offer well‐defined 3D skeleton, while β‐CD with the ability of forming a host‐guest inclusion complexes with a variety of compounds could show an ability of specific selection. The obtained hybrid monoliths were successfully applied for separation of phenols, benzoic acids, and nucleobases. Especially due to the introduction of β‐CD, positional isomers including hydroquinone and resorcinol, o‐nitrophenol and p‐nitrophenol, as well as p‐chlorophenol and o‐chlorophenol were baseline separated and the column efficiency reached 82 300 plates/m for hydroquinone.     

异喹啉酸衍生物刷型手性键合固定相的制备及在联萘酚衍生物拆分中的应用

在(S)-THIQCA环上引入π 酸基团, 制备了一种新型的刷型手性固定相(CSP), 并用于联萘酚及其衍生物的拆分, 探讨了改性剂对色谱行为的影响.     

Hierachically porous nanocrystalline cobalt oxide monoliths through nanocasting

Nanocrystalline cobalt oxide, Co(3)O(4), monoliths exhibiting hierarchical bimoidal porosity have been prepared by nanocasting of porous silica monoliths.     

Liquid-phase synthesis and application of monolithic porous materials based on organic–inorganic hybrid methylsiloxanes, crosslinked polymers and carbons

Our recent progress in porous materials based on organic–inorganic hybrids, organic crosslinked polymers, and carbons is summarized. Flexible aerogels and aerogel-like xerogels with the polymethylsilsesquioxane (PMSQ) composition are obtained using methyltrimethoxysilane (MTMS) as the sole precursor. Preparation process and the flexible mechanical properties of these aerogels/xerogels are overviewed. As the derivative materials, hierarchically macro- and mesoporous PMSQ monoliths and marshmallow-like soft and bendable porous monoliths prepared from dimethyldimethoxysilane /MTMS co-precursors have been obtained. Organic crosslinked polymer monoliths with well-defined macropores are also tailored using gelling systems of vinyl monomers under controlled/living radical polymerization. The obtained polymer monoliths are carbonized and activated into activated carbon monoliths with well-defined pore properties. The activated carbon monoliths exhibit good electrochemical properties as the monolithic electrode. Some possibilities of applications for these porous materials are also discussed.     

Preparation of cyclodextrin‐modified monolithic hybrid columns for the fast enantioseparation of hydroxy acids in capillary liquid chromatography

Cyclodextrins and their derivatives are one of the most common and successful chiral selectors. However, there have been few publications about the use of cyclodextrin‐modified monoliths. In this study, organic hybrid monoliths were prepared by the immobilization of derivatized β‐cyclodextrin alone or with l‐ 2‐allylglycine hydrochloride to the polyhedral oligomeric silsesquioxane methacryl substituted monolith. The main topic of this study is a combined system with dual chiral selectors (l‐ 2‐allylglycine hydrochloride and β‐cyclodextrin) as monolithic chiral stationary phase. The effect of l‐ 2‐allylglycine hydrochloride concentration on enantioseparation was investigated. The enantioseparation of the four acidic compounds with resolutions up to 2.87 was achieved within 2.5 min on the prepared chiral monolithic column in capillary liquid chromatography. Moreover, the possible mechanism of enantioseparation was discussed.