Narrow molecular weight distribution of condensation polymers achieved by adding monomers in many batches

The Z transform method has been used to calculate the molecular weight distribution (MWD) of condensation polymers. The MWD obtained by using Z transform is explicitly discrete. The method is illustrated for two cases: (1) further polycondensation of AB prepolymers with certain initial MWD, and (2) polycondensation of AB and Ar (r is the number of A type functional groups) monomers where AB monomers are added in several batches. In the latter case, it is found that the resulting MWD is much narrower than that of one-batch polycondensation. The trick of producing narrow MWDs of condensation polymers is merely a consequence of keeping AB monomer concentration as low as possible during the reaction in order to suppress the condensation reaction between monomeric AB molecules. The theoretical prediction has been confirmed by Monte Carlo simulation. Therefore, it provides a new possible technique for obtaining narrow MWD polymers through polycondensation reactions.     

Asymmetric total synthesis of spongistatins 1 and 2

The total synthesis of spongistatin 1 (1) and spongistatin 2 (2) has been achieved through an advanced-stage intermediate. The synthesis is highlighted by a highly convergent assembly of the four key fragments (the C1-C15 AB fragment 2, the C16-C28 CD fragment 3, the C29-C43 EF fragment 4, and the C44-C51 side chain 5) at a very advanced stage of the synthesis with minimal functional group interconversion. The CD fragment 3 functions as the central building block to which the other fragments are attached. The synthesis of the AB and CD spiroketal fragments is accomplished through the addition of a metalated gamma-pyrone to a beta-alkoxy aldehyde followed by spiroketalization. The EF subunit was assembled with high diastereoselectivity relying on asymmetric aldol reactions of chlorotitanium enolates of N-propionyl oxazolidinethiones and a double diastereoselective boron aldol to join the E and F fragments. Wittig coupling of the CD and EF fragments followed by a diastereoselective aldol reaction between the CDEF ketone and an AB aldehyde set the stage for attachment of the C44-C51 side chains and final macrolactonization and deprotection.     

单分子链胶束的胶束化行为与相关新概念的提出

采用水溶液均聚合方法,制备了阳离子型表面活性单体（2-丙烯酰胺基）乙基十四烷基二甲基溴化铵（AMC14AB）的均聚物,使用荧光探针法、表面张力测定及电导测定法,重点考察了均聚物P（AMC14AB）在水溶液中的胶束化行为与表面吸附现象．在水溶液中,均聚物P（AMC14AB）呈现单分子链胶束的聚集形态,具有零临界胶束浓度（CMC=0）,从开始加入P（AMC14AB）起,水溶液中随即产生单分子链胶束,不存在Krafft温度．P（AMC14AB）在溶液表面也发生表面吸附,使水的表面张力下降,即P（AMC14AB）也具有表面活性;随着浓度增大,表面吸附量增大,水的表面张力持续下降;当表面吸附达到饱和时,表面张力一浓度曲线上出现突变点,该点应该定义为饱和的表面吸附浓度（SSAC）,而不应该再称为临界胶束浓度．P（AMC14AB）单分子链胶束溶液对疏水有机物（甲苯）的增溶情况,明显不同于普通小分子表面活性剂十六烷基二甲基溴化铵（CTAB）的多分子胶束溶液,甲苯增溶量-P（AMC14AB）浓度的关系曲线上无突变点,而且对甲苯的增溶能力高于CTAB的多分子胶束溶液．     

Micropatterning of biomolecules on a glass substrate in fused silica microchannels by using photolabile linker-based surface activation

Platinum nanoparticles were electrodeposited onto a film of dihexadecyl hydrogen phosphate deposited on a glassy carbon electrode (GCE) and modified with dispersed acetylene black. Scanning electron microscopy and electrochemical impedance spectroscopy revealed that this nanocomposite has a uniform nanostructure and a large surface area that enables fast electron-transfer kinetics. The modified GCE showed high electrocatalytic activity for the oxidation of nitric oxide (NO). Under optimal conditions, the oxidation peak current of nitric oxide is linearly related to the concentration of NO in the concentration range between 0.18 and 120?μM, and the detection limit is as low as 50?nM (at an S/N of 3). The modified electrode was successfully applied to sensing of NO as released from rat liver.

Probing the second dehydrogenation step in ammonia-borane dehydrocoupling: characterization and reactivity of the key intermediate,B-(cyclotriborazanyl)amine-borane

While thermolysis of ammonia-borane (AB) affords a mixture of aminoborane- and iminoborane oligomers, the most selective metal-based catalysts afford exclusively cyclic iminoborane trimer (borazine) and its B–N cross-linked oligomers (polyborazylene). This catalysed dehydrogenation sequence proceeds through a branched cyclic aminoborane oligomer assigned previously as trimeric B-(cyclodiborazanyl)amine-borane (BCDB). Herein we utilize multinuclear NMR spectroscopy and X-ray crystallography to show instead that this key intermediate is actually tetrameric B-(cyclotriborazanyl)amine-borane (BCTB) and a method is presented for its selective synthesis from AB. The reactivity of BCTB upon thermal treatment as well as catalytic dehydrogenation is studied and discussed with regard to facilitating the second dehydrogenation step in AB dehydrocoupling.     

Increasing the arsenate adsorption capacity of neutralized red mud (Bauxsol)

The possibility of increasing the arsenate adsorption capacity of seawater-neutralized red mud (Bauxsol) through acid treatment, combined acid and heat treatment, and the addition of ferric sulfate (Fe(2)(SO(4))(3).7H(2)O) or aluminum sulfate (Al(2)(SO(4))(3). 18H(2)O) is investigated. The results show that acid treatment alone, as well as in combination with heat treatment increases the removal efficiency, with the combination providing the best removal. Adding ferric sulfate or aluminum sulfate, however, suppress the removal. The results also show that activated Bauxsol (AB) produced using combined acid and heat treatment can remove roughly 100% arsenate (at pH 4.5) with or without competing anions (i.e., phosphate, bicarbonate, and sulfate) when the initial arsenate concentration is < or = 2 mgl(-1). Furthermore, it is found that the adsorption process using AB is not accompanied by the release of unwanted contaminants, and TCLP results indicate that the spent AB is not hazardous. It is believed that the AB produced here has good potential as an alternative adsorbent to conventional methods for removing arsenate from water.     

Spectroscopic studies of dehydrogenation of ammonia borane in carbon cryogel

Ammonia borane (AB) is of great interest for storing hydrogen, an important issue in the growing field of hydrogen technology. The reaction pathways leading to the thermal decomposition of solid-state AB incorporated in carbon cryogels (CC) have been studied by spectroscopic methods. The time-dependent thermal decomposition was followed by in situ 11B nuclear magnetic resonance (NMR) and showed a significant increase in hydrogen release kinetics for AB in CC compared to neat AB. Both 11B NMR and Fourier transform infrared spectroscopy show a new reaction product, formed in the thermal decomposition of AB in CC scaffold (CC-AB) that is assigned to reactions with surface oxygen groups. The results indicate that incorporation of AB in CC enhances kinetics because of the reactions with residual surface-bound oxygen functional groups. The formation of new products with surface -O-B bonds is consistent with the greater reaction exothermicity observed when hydrogen is released from CC-AB materials. Scanning electron microscopy shows different morphology of AB in CC-AB nanocomposite as compared to neat AB.     

Efficient degradation of sulfamethoxazole by acetylene black activated peroxydisulfate

Acetylene black (AB), as a kind of carbon material with large specific surface area, low density, strong electron transferability, is supposed to have great potential for application in advanced oxidation processes (AOPs). In this study, AB was utilized as a peroxydisulfate (PDS) activator for the catalytic degradation of sulfamethoxazole (SMX) in aqueous media. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) techniques, zeta potential and Raman spectra were employed to characterize the features of AB. To verify the excellent performance of AB/PDS systems, a series of control experiments were carried out. Compared to graphite/PDS and biochar/PDS system, AB/PDS system could complete degradation of SMX within 15 min. Besides, the effects of key factors including AB dosage, PDS dosage, initial pH and SMX concentration on SMX degradation in AB/PDS system were elucidated systematically. Furthermore, through the radical quenching experiments, it was proved that singlet oxygen (¹O₂) was dominantly responsible for the degradation of SMX. Finally, based on the experiment results and comprehensive analysis, a probable reaction mechanism of AB/PDS system for SMX degradation was proposed. This work suggests that AB has a good potential for tackling the hazardous pollutants in environmental remediation.     

Visible light absorption by various titanium dioxide specimens

A set of heat-induced and photoinduced absorption spectra of various compositions of Degussa P25 TiO2 and different polymers has been examined. The spectra are described as the sum of overlapping absorption bands (ABs) with maxima at 2.90 eV (427 nm, AB1), 2.55 eV (486 nm, AB2), and 2.05 eV (604 nm, AB3); the spectra correlate entirely with the experimentally observed absorption spectra after the reduction of TiO2. Absorption spectra of visible-light-active TiO2 photocatalysts reported recently in the literature have also been analyzed. Relatively narrow absorption spectra are very similar and independent of the method of photocatalyst preparation. The average absorption spectrum can be described reasonably well by the sum of the two absorption bands AB1 and AB2. It is argued that visible light activation of TiO2 specimens (anion-doped or otherwise) implicates defects associated with oxygen vacancies that give rise to color centers displaying these absorption bands and not to a narrowing of the original band gap of TiO2 (EBG approximately 3.2 eV, anatase) through mixing of dopant and oxygen states, as has been suggested recently in the literature.     

Large-Scale and Facile Preparation of Pure Ammonia Borane through Displacement Reactions

Ammonia borane (AB) is the most widely studied hydride for hydrogen storage in addition to being a useful reducing agent. Attempts to synthesize pure AB through simple displacement reactions date back to the 1960s; but have been thwarted by the formation of the diammoniate of diborane (DADB), an ionic byproduct. Based on our recent characterization of the formation mechanism of DADB, we have developed a large-scale synthesis of pure AB by both increasing the basicity of the Lewis base of the borane carrier and using a nonpolar solvent to limit the formation of an intermediate, the ammonia diborane (AaDB). Conditions were optimized for the preparation of pure AB by two displacement reactions, either ammonia with dimethylsulfide borane or ammonia with dimethylaniline borane in toluene at room temperature. These procedures are also suitable for preparation of other amine boranes which had the same problem of forming ionic byproducts during displacement reactions.     

Heteronuclear diatomic force constants clarified through perturbation theory II

A simple relationship between the heteronuclear diatomic force constant (K(AB)) and the homonuclear diatomic force constants (K(AA), K(BB)), which was proposed in a previous report, has been improved through the second-order perturbation theory as K(AB) = zeta3(K(AA) x K(BB))(1/2); zeta = (R(AA) x R(BB))(1/2)/R(AB) where zeta denotes the correction factor in which R(AB), R(AA), and R(BB) are the equilibrium internuclear distances of diatomic molecules AB, AA, and BB, respectively. To test the above expression, a large number of heteronuclear diatomic force constants have been calculated and compared with those obtained from normal coordinate analyses as well as ab initio quantum mechanical methods (Gaussian 98W). We have found that the above modified expression better reproduces the force constants of most heteronuclear diatomic molecules than the previous expression. It is therefore expected that the expression may also be applied to the prediction of stretching force constants between heteronuclear diatomics in various polyatomic molecules.     

Lewis acid-base titrations employing megacycle-frequency oscillators : Titration involving stannic chloride in acetonitrile and benzene solution

By using a megacycle-frequency oscillator to follow the reaction, the Lewis acid, stannic chloride, can be titrated with nitrogen bases in acetonitrile as solvent and with oxygen bases in benzene as solvent with an error of 0.5–4%; reverse-order titrations were equally successful. The characteristic maxima and minima in the titration curves indicate that in acetonitrile stannic chloride probably forms AB, A3B4 and A4B3 adducts with piperidine, and AB and A4B3 adducts with pyridine; no adduct was indicated for diphenylamine. In benzene solution, stannic chloride forms (a) AB2 adducts with MeOH, EtOH, n-PrOH, iso-PrOH, n-BuOH, sec.-BuOH and iso-BuOH, (b) AB and AB2 adducts with acetone and tetrahydrofuran, and (c) an AB adduct with dioxane; the stoichiometry for a group of ethers is less decisive. The presence of the 1:1 tetrahydrofuran-stannic chloride adduct in benzene supports the belief that pentacoordinate tin exists in certain adducts with oxygen bases. The megacycle-frequency oscillator was also applied to the estimation of the relative base strength of Lewis bases toward a given Lewis acid by assuming that the instrument response increase, as an ether or alcohol was added to stannic chloride in benzene, is due to the formation of the new coordinate bond. Agreement of the data obtained with the limited existing data on relative base strengths of ethers is good in those cases where comparable steric factors are involved.     

Large‐Scale and Facile Preparation of Pure Ammonia Borane through Displacement Reactions

Ammonia borane (AB) is the most widely studied hydride for hydrogen storage in addition to being a useful reducing agent. Attempts to synthesize pure AB through simple displacement reactions date back to the 1960s; but have been thwarted by the formation of the diammoniate of diborane (DADB), an ionic byproduct. Based on our recent characterization of the formation mechanism of DADB, we have developed a large‐scale synthesis of pure AB by both increasing the basicity of the Lewis base of the borane carrier and using a nonpolar solvent to limit the formation of an intermediate, the ammonia diborane (AaDB). Conditions were optimized for the preparation of pure AB by two displacement reactions, either ammonia with dimethylsulfide borane or ammonia with dimethylaniline borane in toluene at room temperature. These procedures are also suitable for preparation of other amine boranes which had the same problem of forming ionic byproducts during displacement reactions.     

利用球磨制备AB2-AB5复合贮氢合金及其电极性能和微观结构研究

为了改善Zr基AB₂-型贮氢合金的电极性能，本文选择稀土基AB₅型贮氢合金作为表面改性剂，将Zr_0.9Ti_0.1(Mn_0.35Ni_0.50V_0.15)₂(简称AB₂)合金与稀土基AB₅型合金(简称AB₅)进行混合和球磨处理，制备了AB₂-AB相似文献   

原位合成钴/还原氧化石墨烯纳米粒子催化氨硼烷制氢

采用简单的原位还原合成方法,利用具有温和还原性能的氨硼烷作为还原剂,在室温下一步还原氧化石墨烯和氯化钴混合溶液制备了还原氧化石墨烯负载钴纳米复合材料催化剂. 利用所制备的钴/还原氧化石墨烯催化剂催化氨硼烷水解制氢,发现钴/还原氧化石墨烯具有优异的催化性能. 相对于没有负载的钴纳米粒子以及采用硼氢化钠作为还原剂制备的钴/还原氧化石墨烯催化剂,采用氨硼烷还原制备的钴/还原氧化石墨烯催化剂表现出更加优越的催化性能. 动力学测试表明,钴/还原氧化石墨烯催化氨硼烷水解反应为零级反应,同时钴/还原氧化石墨烯催化剂催化氨硼烷水解反应的活化能为27.10 kJ·mol^-1,低于大部分已报道的其它催化剂,甚至一些贵金属催化剂的活化能. 钴/还原氧化石墨烯催化剂有着稳定的循环使用性,特别是其具有的磁性使得它能够直接从溶液中通过磁力回收,极具应用前景. 这种简单有效的合成方法有望推广到其它的金属-还原氧化石墨烯纳米复合材料体系.     

Codetermination of antimicrobial agents in rabbit tear fluid using LC–MS/MS assay: Insights into ocular pharmacokinetic study

Managing ocular microbial infections typically requires pharmacotherapy using antibiotic eye drops, such as moxifloxacin hydrochloride (MFX), combined with an antifungal agent like amphotericin B (AB). We carried out and validated an LC–MS/MS assay to quantify these compounds in rabbit tear fluid in order to look into the pharmacokinetics of these two drugs. We employed a protein precipitation technique for the extraction of drugs under examination. A Waters Symmetry C₁₈ column was used to separate the analytes and internal standard. The composition of the mobile phase was like (A) 0.1% v/v formic acid in water and (B) methanol. The detection of MFX and AB was accomplished through the utilization of positive ion electrospray ionization under multiple reaction monitoring mode. The linearity curves for both analytes exhibited an acceptable trendline across a concentration range of 2.34–300 ng/mL for MFX and 7.81–1000 ng/mL for AB in surrogate rabbit tear fluid. The lower limit of quantitation for MFX was 2.34 ng/mL, while for AB, it was 7.81 ng/mL. The approach was strictly validated, encompassing tests of selectivity, linearity (with r² > 0.99), precision, accuracy, matrix effects, and stability. Consequently, we employed this method to evaluate the pharmacokinetics profiles of MFX and AB in rabbit tear fluid following single topical doses.     

Lectin-Triggered Aggregation of Glyco-Gold Nanoprobes for Activity-based Sensing of Hydrogen Peroxide by the Naked Eye

The purpose of this study was to develop a colorimetric assay for detecting hydrogen peroxide (H₂O₂) through a combination of using an aryl boronate (AB) derivative and gold nanoparticles (AuNPs). The unique optical property of AuNPs is applied to design a detection probe. The aggregation of AuNPs could be directly observed as a color change by the naked eye. A mannoside-boronate-sulfide ( MBS ) ligand was designed that contains an arylboronate (AB), a mannoside, and a thiol group. The thiol group bonds covalently with the surface of AuNPs to obtain MBS@AuNPs. The mannoside moiety recognizes concanavalin A (Con A), a lectin with four carbohydrate recognition sites that can specifically recognize the non-reducing end of an α-D-mannoside or α-D-glucoside structure. The AB structure on MBS first reacts with H₂O₂ and then inserts an oxygen atom in the B−H bond, which triggers intramolecular electron rearrangement to cleave the covalent bond, resulting in a MBSt mixture. The MBS or MBSt is then modified to citrate-coated AuNPs (c-AuNPs) to have MBS@AuNPs or MBSt@AuNPs. When the MBS@AuNPs are incubated with Con A, the Con A recognizes multiple mannosides on the surface of the MBS@AuNPs. Subsequently, the MBS@AuNPs aggregate and the solution's color changes from red to purple, but this color change does not occur in the case of MBSt@AuNPs. The phenomenon can be observed by the naked eye.     

Carboxymethyl glycoside lactone (CMGL) synthons: Scope of the method and preliminary results on step growth polymerization of α-azide-ω-alkyne glycomonomers

Carboxymethyl glycoside lactones (CMGLs) are bicyclic synthons which open readily for accessing new types of pseudo-glycoconjugates, such as sugar-amino acid hybrids, neoglycolipids, pseudodisaccharides, and membrane imaging systems. After lactone opening, free OH-2 is available for further functionalization, leading to 1,2-bisfunctionalized derivatives. This strategy is illustrated herein with new polymerizable systems of the AB type bearing both azide and alkyne functions prepared from α or β gluco-CMGL synthons. After the reaction of lactones with propargylamine, an azido group was introduced by two different sequences leading to either the 2-manno-azido or the 6-gluco-azido products. The capability of these AB monomers to undergo step growth polymerization through copper(I) catalyzed alkyne-azide cycloaddition (CuAAC) and generate glycopolytriazoles was evidenced.     

In situ solid state 11B MAS-NMR studies of the thermal decomposition of ammonia borane: mechanistic studies of the hydrogen release pathways from a solid state hydrogen storage material

The mechanism of hydrogen release from solid state ammonia borane (AB) has been investigated via in situ solid state (11)B and (11)B{(1)H} MAS-NMR techniques in external fields of 7.1 T and 18.8 T at a decomposition temperature of 88 degrees C, well below the reported melting point. The decomposition of AB is well described by an induction, nucleation and growth mechanistic pathway. During the induction period, little hydrogen is released from AB; however, a new species identified as a mobile phase of AB is observed in the (11)B NMR spectra. Subsequent to induction, at reaction times when hydrogen is initially being released, three additional species are observed: the diammoniate of diborane (DADB), [(NH(3))(2)BH(2)](+)[BH(4)](-), and two BH(2)N(2) species believed to be the linear (NH(3)BH(2)NH(2)BH(3)) and cyclic dimer (NH(2)BH(2))(2) of aminoborane. At longer reaction times the sharper features are replaced by broad, structureless peaks of a complex polymeric aminoborane (PAB) containing both BH(2)N(2) and BHN(3) species. The following mechanistic model for the induction, nucleation and growth for AB decomposition leading to formation of hydrogen is proposed: (i) an induction period that yields a mobile phase of AB caused by disruption of the dihydrogen bonds; (ii) nucleation that yields reactive DADB from the mobile AB; and (iii) growth that includes a bimolecular reaction between DADB and AB to release the stored hydrogen.     

Computational study of the release of H2 from ammonia borane dimer (BH3NH3)2 and its ion pair isomers

High-level electronic structure calculations have been used to map out the relevant portions of the potential energy surfaces for the release of H2 from dimers of ammonia borane, BH3NH3 (AB). Using the correlation-consistent aug-cc-pVTZ basis set at the second-order perturbation MP2 level, geometries of stationary points were optimized. Relative energies were computed at these points using coupled-cluster CCSD(T) theory with the correlation-consistent basis sets at least up to the aug-cc-pVTZ level and in some cases extrapolated to the complete basis set limit. The results show that there are a number of possible dimers involving different types of hydrogen-bonded interactions. The most stable gaseous phase (AB)2 dimer results from a head-to-tail cyclic conformation and is stabilized by 14.0 kcal/mol with respect to two AB monomers. (AB)2 can generate one or two H2 molecules via several direct pathways with energy barriers ranging from 44 to 50 kcal/mol. The diammoniate of diborane ion pair isomer, [BH4-][NH3BH2NH3+] (DADB), is 10.6 kcal/mol less stable than (AB)2 and can be formed from two AB monomers by overcoming an energy barrier of approximately 26 kcal/mol. DADB can also be generated from successive additions of two NH3 molecules to B2H6 and from condensation of AB with separated BH3 and NH3 molecules. The pathway for H2 elimination from DADB is characterized by a smaller energy barrier of 20.1 kcal/mol. The alternative ion pair [NH4+][BH3NH2BH3-] is calculated to be 16.4 kcal/mol above (AB)2 and undergoes H2 release with an energy barrier of 17.7 kcal/mol. H2 elimination from both ion pair isomers yields the chain BH3NH2BH2NH3 as product. Our results suggest that the neutral dimer will play a minor role in the release of H2 from ammonia borane, with a dominant role from the ion pairs as observed experimentally in ionic liquids and the solid state.