A multiple time-gated system for pulsed digital gamma-ray spectroscopy

Neutron activation analysis (NAA) systems that use pulsed neutron generators (NGs) employ spectrum gating procedures to segregate nuclear processes by acquiring gamma-ray spectra separately when the generator is on (HIGH gate) and off (LOW gate). Often, the actual neutron burst lags the leading edge of the HIGH gate signal by a few μs. Thus, count rates vary not only between the on and off states of the NG, but within them as well. Recent advances in digital gamma-ray spectrometers that allowed the concurrent acquisition of data by sorting events into two separate spectra based on gate status suggested that a time-resolved analysis that further subdivided the neutron pulse cycle could obtain further information to separate gamma-rays produced by different nuclear reactions. In this paper we introduce a gating system for time-resolved NAA that is capable of concurrently acquiring as many as 16 spectra from up to 8 user-defined time intervals during each of the HIGH gate and LOW gate periods, each with all required timing and count rate information. We present the new gating system’s implementation, operation and some first experimental test results.     

手性铜(Ⅱ)-席夫碱配合物催化苯乙烯不对称环丙烷化反应

Twelve chiral copper(Ⅱ) Schiff base complexes, derived from (R) (+) 2 amino 1,1 diaryl 1 propanol with substituted salicylaldehydes, were examined as a catalyst for asymmetric cyclopropanation of styrene with ethyl diazoacetate. It was found that the substituents at 3 and 5 positions of salicylaldehyde in the ligands had great effects on catalytic activity and enantioselectivity of the catalyst. The complex with strong electron withdrawing group (NO 2) at 5 position and the smallest stereo hinder (H) at 3 position of salicylaldehyde showed highly catalytic activity and enantioselectivity, up to ee =87 4% for trans and ee =82 8% for cis isomers respectively, and the ratio 39/61 of cis to trans isomers was obtained at 40 ℃ with 1,2 dichloroethane as solvent.     

Au/ZrO2催化剂中ZrO2的尺寸效应:1,3-丁二烯加氢反应

在不同温度(673～1073K)下,于流动N2气中焙烧ZrO(OH)2醇(乙醇)凝胶,制备了不同尺寸的ZrO2-AN纳米晶(6～30nm).采用沉积-沉淀方法制备了相应的质量分数为0.7%的Au/ZrO2-AN催化剂.用XRD,XRF,TEM/HRTEM,EDS,N2吸附和1,3-丁二烯加氢反应对ZrO2-AN和Au/ZrO2-AN催化剂进行了表征.结果表明,在所有的Au/ZrO2-AN样品中,Au粒子的平均尺寸为4～5nm,ZrO2-AN的颗粒大小没有因为负载Au粒子而发生改变.1,3-丁二烯在Au/ZrO2-AN催化剂催化下能以100%的选择性进行加氢反应生成单烯烃.随着Au/ZrO2-AN催化剂中ZrO2-AN纳米晶尺寸的增加或“载体”焙烧温度的升高,1,3-丁二烯的转化率明显降低;1-丁烯的选择性先增加后减小,2-丁烯中反/顺异构体的摩尔比在0.5～1.0的范围内逐渐增大,TEM/HRTEM表征结果清楚地表明,Au/ZrO2-AN催化剂中Au粒子与ZrO2-AN颗粒接触界面/周边随ZrO2-AN颗粒尺寸的减小而明显增加,这很可能是含有更小尺寸ZrO2-AN纳米粒子的Au/ZrO2-AN催化剂具有更高的催化活性的重要原因.     

Palladium–cadmium sulfide nanopowder at oil–water interface as an effective catalyst for Suzuki–Miyaura reactions

A simple and effective strategy is described for the synthesis of Pd–CdS nanopowder by the reduction of an organopalladium(II) complex, [PdCl₂(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene), in the presence of CdS quantum dots (QDs) at a toluene–water interface. We investigated the impact of addition of CdS QDs on catalytic activity of Pd nanoparticles (NPs). The Pd–CdS nanopowder functions as an efficient catalyst for Suzuki–Miyaura reactions for the formation of carbon–carbon bonds. There is a high electron density on Pd NPs and due to their high electron affinity they behave as an electron scavenger from CdS increasing the rate of oxidative addition, which is the rate‐determining step of the catalytic cycle, and, just as we expect, the C─C coupling reaction with the Pd–CdS nanopowder is faster and occurs in less time than that with Pd nanocatalysts. Compared to classical reactions, this method consistently has the advantages of short reaction times, high yields in a green solvent, reusability of the catalyst without considerable loss of catalytic activity and low cost, and is a facile method for the preparation of the catalyst.     

An anionic nucleophilic catalyst system for the diastereoselective synthesis of trans-beta-lactams

Trans-disubstituted beta-lactams show increasing utility and prominence in numerous pharmaceutical applications, making their asymmetric synthesis an attractive goal for chemists. We introduce an anionic, nucleophilic catalyst system that provides an efficient, diastereoselective route to trans-disubstituted beta-lactams, a complement to our previously described catalytic methodology for generating the corresponding cis diastereomers. This catalytic, "switch mechanism" process allows for flexibility in the stereoselective synthesis of beta-lactams, producing either cis or trans products as desired from the same substrates. [reaction: see text]     

乙炔在钒催化体系下的聚合

本工作采用三乙酰基丙酮钒及二乙酰基氧钒同烷基铝组成的催化体系,研究了乙炔聚合的规律及聚乙炔成膜的条件,并初步研究了聚乙炔膜的链节结构、形态结构及室温电导率。     

碳笼烯(C_(60)/C_(70))载体钕系催化异戊二烯聚合

较系统地研究了Ｎｄ（ｎａｐｈ）３ Ｃ６０Ｘ Ａｌ（ｉ Ｂｕ）３碳笼烯钕系催化异戊二烯配位聚合的反应规律，并测定了聚合物分子量、分子量分布和微观结构．碳笼烯钕系为一均相体系．Ａｌ／Ｎｄ及Ｃｌ／Ｎｄ摩尔比对催化体系的活性、聚合物分子量都有较大的影响，活性中心的形成有很好的时间和温度的稳定性．ＰＩｐ的特性粘数［η］在２左右，分子量分布ＭＷ／Ｍｎ在３左右，均小于传统钕催化体系．ＰＩｐ的顺式含量大于９７％．     

Synthesis of a new zirconium catalyst for ethylene polymerization

A novel complex dichlorobis(2‐ethyl‐3‐hydroxy‐4‐pyrone)zirconium(IV) (ZrCl₂(ethylpyrone)₂) was synthesized. Complexation of the pyrone ligand to the zirconium was confirmed by UV, ¹H and ¹³C‐NMR, and electrochemical studies. NMR showed the presence of four isomers and density functional theory calculations indicated that the main isomer had a cis configuration. The catalyst was shown to be active in ethylene polymerization in the presence of the cocatalyst methylaluminoxane. The highest catalyst activity for the zirconium complex was achieved at Al/Zr = 2500, 70 °C and when a small concentration of catalyst was used (1 μmol). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3830–3841, 2008     

Ligand-controlled, complementary stereoselectivity in the platinum-catalyzed intramolecular silaboration of alkenes

An intramolecular silaboration of borylsilanyl homoallyl ethers was achieved using a platinum catalyst, giving 1-oxa-2-silacyclopentanes in high yields. The stereoselectivity of the reactions of sec-homoallyl ethers strongly depended on the phosphorus ligand of the platinum catalysts used. The platinum complex bearing the PCyPh2 ligand was found to be the most trans-selective catalyst (trans/cis = 81:19-92:8), whereas a highly cis-selective cyclization was achieved using a platinum catalyst having tris(2,4-di-tert-butylphenyl)phosphite ligand (trans/cis = 8:92-6:94). The synthetic utility of the intramolecular silaboration was demonstrated by the complementary synthesis of a pair of diastereomers of 6-methylheptane-1,3,5-triol.     

Monodispersed AuPd nanoalloy: composition control synthesis and catalytic properties in the oxidative dehydrogenative coupling of aniline

A series of AuPd@C nanoalloy catalysts with tunable compositions were successfully prepared by a co-reduction method. The use of borane-tert-butylamine complex as reductant and oleylamine as both solvent and reductant was very effective for the preparation of the monodispersed nanoalloy. We evaluated the catalytic activity of these AuPd@C nanoalloys for oxidative dehydrogenative coupling of aniline, which showed better catalytic activity than equal amounts of sole Au@C or Pd@C catalyst. The Au₁Pd₃@C catalyst exhibited the best performance, indicating that the conversion and selectivity were improved along with the increase of Pd composition. However if the Pd composition was too high in the AuPd alloy, Au₁Pd₇@C achieved only 81% conversion in this reaction.     

氯化钕配合物在4—乙烯吡啶聚合反应中的催化作用

氯化钕配合物是双烯烃聚合催化剂组分之一 ,与烷基铝所构成的二元体系对丁二烯聚合具有较佳活性 [1,2 ] ,但用氯化钕配合物催化极性单体的聚合反应尚未见报导 .极性单体的聚合是人们感兴趣的课题 ,例如 Benito等 [3 ]用过渡金属化合物 (VCl3-Al Et3)体系催化聚合 4-乙烯吡啶 (4VPy)极性单体 .但是它的催化活性较低 ,催化效率为 3.1×1 0 -4 kg· mol-1· h-1.我们研究了将含少量的氯化钕配合物催化剂用于该聚合反应 ,催化活性得到很大提高 ,催化效率达到 50 .71 Kg· mol-1· h-1.表明氯化钕配合物催化体系不仅对双烯烃而且对极性单体聚…     

Catalysis of the oxidation of hydrogen by a platinum-acetylacetone complex anchored on silica

By binding platinum ions with acetylacetone immobilized on a silica surface, we have obtained a metal complex catalyst containing Pt(II). We have also studied its catalytic activity in the model reaction of oxidation of hydrogen. We have shown that over the course of the catalytic process, this catalyst exhibits high catalytic activity at room temperatures and displays the “surface memory” effect with respect to a previous reaction. The activity of the grafted Pt complex is significantly higher than the activity of a supported platinum catalyst. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 34, No. 3, pp. 170–175, May–June, 1998.     

Synthesis and Catalytic Activity of a Grubbs‐Hoveyda Pre‐catalyst Having a Trimeric Resting State

A Grubbs‐Hoveyda pre‐catalyst having a trimeric resting state based on 2,4,6‐trichloro‐1,3,5‐triazine was synthesized and the complex was characterized by NMR, HRMS and elemental analysis. The activity of this complex for ring‐closing metathesis (RCM) was investigated. The catalytic system possesses high catalytic activity for many different olefin substrates.     

Alkene cyclopropanation catalyzed by Halterman iron porphyrin: participation of organic bases as axial ligands

With the iron(III) complex of the Halterman iron porphyrin [P*Fe(Cl)] and ethyl diazoacetate (EDA) as catalyst and carbene source, respectively, styrene-type substrates were converted to cyclopropyl esters with high trans/cis ratio (not less than 12) and high enantioselectivity for the trans-isomers (74-86% ee). The isomeric distribution of the cyclopropyl esters so obtained is akin to that obtained from the previously reported Ru(II) counterpart [P*Ru(CO)]. A linear Hammett correlation log(k(X)/k(H)) = sigma(+)rho was observed with rho = -0.57 suggesting the involvement of an electrophilic cyclopropanating species derived from the iron(II) center as the reactive intermediate in the catalytic cycle. This is further supported by a dramatic decrease in the enantioselectivity and trans/cis ratio observed in an experiment of styrene cyclopropanation when the reaction mixture was deliberately exposed to air. Axial ligand effects on the selectivities was also investigated. Substantial improvement in trans/cis ratios could be achieved by addition of organic bases such as pyridine (py) and 1-methylimidazole (MeIm) to the catalytic reaction. The existence of axially ligated iron carbene moieties, [P*Fe(CHCO(2)Et)(py)] and [P*Fe(CHCO(2)Et)(MeIm)], was established by electrospray mass spectrometry. Study of secondary kinetic isotope effect indicated that a more product-like transition state was generated by addition of MeIm.     

Biomimetic Hydrogenation Catalyzed by a Manganese Model of [Fe]-Hydrogenase

[Fe]-hydrogenase is an efficient biological hydrogenation catalyst. Despite intense research, Fe complexes mimicking the active site of [Fe]-hydrogenase have not achieved turnovers in hydrogenation reactions. Herein, we describe the design and development of a manganese(I) mimic of [Fe]-hydrogenase. This complex exhibits the highest activity and broadest scope in catalytic hydrogenation among known mimics. Thanks to its biomimetic nature, the complex exhibits unique activity in the hydrogenation of compounds analogous to methenyl-H₄MPT⁺, the natural substrate of [Fe]-hydrogenase. This activity enables asymmetric relay hydrogenation of benzoxazinones and benzoxazines, involving the hydrogenation of a chiral hydride transfer agent using our catalyst coupled to Lewis acid-catalyzed hydride transfer from this agent to the substrates.     

Towards a rational design of ruthenium CO2 hydrogenation catalysts by Ab initio metadynamics

Complete reaction pathways relevant to CO2 hydrogenation by using a homogeneous ruthenium dihydride catalyst ([Ru(dmpe)2H2], dmpe=Me2PCH2CH2PMe2) have been investigated by ab initio metadynamics. This approach has allowed reaction intermediates to be identified and free-energy profiles to be calculated, which provide new insights into the experimentally observed reaction pathway. Our simulations indicate that CO2 insertion, which leads to the formation of formate complexes, proceeds by a concerted insertion mechanism. It is a rapid and direct process with a relatively low activation barrier, which is in agreement with experimental observations. Subsequent H2 insertion into the formate--Ru complex, which leads to the formation of formic acid, instead occurs via an intermediate [Ru(eta2-H2)] complex in which the molecular hydrogen coordinates to the ruthenium center and interacts weakly with the formate group. This step has been identified as the rate-limiting step. The reaction completes by hydrogen transfer from the [Ru(eta2-H2)] complex to the formate oxygen atom, which forms a dihydrogen-bonded Ru--HHO(CHO) complex. The activation energy for the H2 insertion step is lower for the trans isomer than for the cis isomer. A simple measure of the catalytic activity was proposed based on the structure of the transition state of the identified rate-limiting step. From this measure, the relationship between catalysts with different ligands and their experimental catalytic activities can be explained.     

Location of the Catalytic Site in Supported Atom Transfer Radical Polymerization

Summary: A supported and highly recyclable catalyst complex, CuBr/HMTETA physically adsorbed to silica gel, was used for the ATRP of MMA to elucidate the nature of the catalytic site. In some polymerizations, the reaction solutions were filtered and compared with their unfiltered references for catalytic activity. The filtered systems had high catalyst activity indicating the presence of active catalyst sites in solution. These sites are the primary catalytic contributors.

Conversion versus time and first‐order kinetic plot for the control and filtered polymerizations.     

Synthesis, structure and catalytic activity of a bimacrocylic NHC palladium allyl complex

The preparation of a bimacrocyclic NHC palladium allyl complex 4 is described. The complex was obtained by transmetalation with allyl palladium chloride dimer from the NHC silver complex 2 in 85% yield. Complex 4 was fully characterized by spectroscopic methods and by single-crystal X-ray analysis. In a preliminary catalytic study, complex 4 showed high activity in the Suzuki-Miyaura cross-coupling of unactivated aryl chlorides and bromides with 1-naphthalene-boronic acid at low catalyst loading. Good results were also obtained in the Mizoroki-Heck reaction of aryl bromides with styrene, but a decrease in yield was observed when aryl chlorides were used.     

Le complexe [{PtCl2(triméthyl-2,4,6-pyridine)}2] catalyseur homogene d'hydrogenation et d'hydrosilylation d'olefines et d'aldehydes et cetones α,β-insatures

The chloro-bridged platinum(II) complex dichlorobis(2,4,6-trimethylpyridine)-platinum was found to be an active catalyst for homogeneous hydrogenation and hydrosilylation of olefins and α,β-unsaturated aldehydes and ketones at room temperature and under atmospheric pressure. Hydrosilylation of terminal olefins can be achieved with dimethylphenylsilane and a catalyst/reactant ratio of 10^?6/1. This complex is the first example of a platinum(II) compound containing pyiridine ligands having good catalytic activity possibilities.     

Biomimetic Hydrogenation Catalyzed by a Manganese Model of [Fe]‐Hydrogenase

[Fe]‐hydrogenase is an efficient biological hydrogenation catalyst. Despite intense research, Fe complexes mimicking the active site of [Fe]‐hydrogenase have not achieved turnovers in hydrogenation reactions. Herein, we describe the design and development of a manganese(I) mimic of [Fe]‐hydrogenase. This complex exhibits the highest activity and broadest scope in catalytic hydrogenation among known mimics. Thanks to its biomimetic nature, the complex exhibits unique activity in the hydrogenation of compounds analogous to methenyl‐H₄MPT⁺, the natural substrate of [Fe]‐hydrogenase. This activity enables asymmetric relay hydrogenation of benzoxazinones and benzoxazines, involving the hydrogenation of a chiral hydride transfer agent using our catalyst coupled to Lewis acid‐catalyzed hydride transfer from this agent to the substrates.